when an array is passed to a method: group of answer choices the method has direct access to the original array. a reference to the array is passed. it is passed just as an object. all of the above.
Answers
Actually, the memory address of the array is provided when we pass an array as an argument to a method (reference). This array is therefore affected by any modifications made to the procedure.
Explain about the array?A collection of objects with the same type that are kept close to one another in memory and can be individually referred to by using an index to a unique identifier is referred to as an array. An array of five int values can be stated rather than having to define five distinct variables (each with its own identifier).
A collection of data is stored in an array, although it is frequently more helpful to conceive of an array as a collection of variables of the same type.
An array type is a user-defined data type made up of a sorted collection of elements with the same data type. The ordinal position is used as the array index in an ordinary array type, which has a set upper limit on the number of elements it can contain.
To learn more about array refer to:
https://brainly.com/question/28061186
#SPJ4
Related Questions
What is the specific volume of oxygen at 40 psia and 80°F?
Answers
Ur welcome
3. Of the following answers, which is NOT a way for employees to control exposure routes?
Answers
There are a lot of ways employees uses in controlling exposure routes. But when risk assessment is not be performed is not a part of the control methods.
What are the three ways to control workplace hazards?The ways to control workplace hazards are known to be means taken to ensure safety in the workplace.
The examples are:
The use a hazard control plan to know, select and implement controls. Looking into the efficiency of existing controls, and creating plans with measures to protect workers in case of emergencies and nonroutine activities, etc.Learn more about exposure routes from
https://brainly.com/question/25799066
please answer this question
Answers
The gas phase reaction of the C6H6(g) + Cl2(g) = C6H5Cl(g) + HCl(g) will get the chlorobenzene and hydrogen chloride.
What is chlorobenzene?An aromatic organic compound with the chemical formula C₆H₅Cl is chlorobenzene. This volatile, colorless liquid is a common solvent and a crucial step in the production of other compounds.In the past, phenol and DDT were produced using chlorobenzene. It is still utilised today to create insecticides and other chemicals that either prevent or eliminate undesired pests. Car parts can also be greased with chlorobenzene. When chlorobenzene is released into the atmosphere, other chemicals and sunshine gradually break it down.Chlorobenzene is a common volatile organic compound (VOC) that is employed in many industrial contexts as a solvent, degreaser, and chemical intermediary.Given data :
C6H6(g) + Cl2(g) = C6H5Cl(g) + HCl(g)
Change in Free Energy: ΔG(20C) = -125.7kJ (negative, so the reaction runs)
Change in Enthalpy: ΔH(20C) = -119.9kJ (negative, so the reaction is exothermic)
Learn more about chlorobenzene refer to ;
https://brainly.com/question/30266632
#SPJ1
Which of the following can cause a flopping sound at the front of the engine
A) drive belt too loose
B) timing chain too loose
C) drive belt too tight
D) timing chain too tight
Answers
Centrifugal pump delivers water against a net head of 14. 5 m and at designed speed of 1000 rpm. The vanes are curved back at an angle of 300 with the periphery. The impeller diameter is 300 mm and outlet width 50 mm. Determine the discharge of the pup, if the manometric efficiency is 95 %
Answers
The discharge of the pump is approximately 0.0744 cubic meters per second.
To determine the discharge of the centrifugal pump, we need to consider the head, impeller diameter, outlet width, and the manometric efficiency.
Given:
Net head (H) = 14.5 m
Impeller diameter (D) = 300 mm = 0.3 m
Outlet width (W) = 50 mm = 0.05 m
Manometric efficiency (η) = 95% = 0.95
The discharge (Q) can be calculated using the following formula:
Q = (π/4) * D^2 * W * N / (g * H * η)
where:
π = 3.14159 (pi)
D = Impeller diameter
W = Outlet width
N = Speed of the pump in revolutions per minute (rpm)
g = Acceleration due to gravity (9.81 m/s^2)
H = Net head
η = Manometric efficiency
Substituting the given values into the formula:
Q = (3.14159/4) * (0.3)^2 * 0.05 * 1000 / (9.81 * 14.5 * 0.95)
Simplifying the equation:
Q ≈ 0.0744 m^3/s
Therefore, the discharge of the pump is approximately 0.0744 cubic meters per second.
Learn more about discharge here
https://brainly.com/question/31460508
#SPJ11
Consider the signal x(t) = e-5tu(t -1), and denote its Laplace transform by X(s). (a) Using eq. (9.3), evaluate X(s) and specify its region of convergence. (b) Determine the values of the finite numbers A and to such that the Laplace transform G(s) of g(t) = Ae-51 u(-t-to) has the same algebraic form as X(s). What is the region of convergence corresponding to G(s)?
Answers
The region of convergence corresponding to G(s) will be To = -1 and A = 1
How to illustrate the information?Based on the information given, it should be noted that the value when we evaluate X(s) and specify its region of convergence will be:
X(s( = e^(5 + 5)/(5+5)
= -5.
The region where the function exists in the transfer function's pole/zero plot is known as the Region of Convergence. We prefer to deal with rational functions for the purpose of practical filter design, which may be defined by two polynomials, one for identifying the poles and the other for calculating the zeros, respectively.
The values of the finite numbers A and to such that the Laplace transform G(s) of g(t) = Ae-51 u(-t-to) has the same algebraic form as X(s) will be - 1 and the region of convergence corresponding to G(s) is 1.
Therefore based on the information, the region of convergence corresponding to G(s) will be To = -1 and A = 1.
Learn more about convergence on:
brainly.com/question/1521191
#SPJ1
Find the general solution of the given differential equation. Give the largest interval over which the general solution is defined. Determine whether there are any transient terms in the general solution.
x dx/dy−y=x^2sinx
Answers
Answer:
Interval: x∈ ( 0, ∞ )
There are no transient terms
Explanation:
x (dy/dx) – y= x^2sinx
Attached below is the detailed solution of the Given problem
There are no transient terms found in the general solution
Interval: x∈ ( 0, ∞ )
Why do we study National studies
Answers
Answer:
It’s so we can then understand other cultures and other ways that people do things or we can also be prepared for what a country that we have not been to yet is going to relatively be like. This can also help with vacation planning.
Explanation:
it can also help us understand different people from different cultures.
Technician A says you should place the air ratchet setting to
clockwise to loosen a fastener. Technician B says a fastener
must be set to the proper torque after using an air ratchet. Who
is correct?
Answers
According to the article, what is one reason why commercial carmakers aim to develop driverless technology?
Answers
Incomplete question. However, I inferred you referring to the online article "How automakers can survive the self-driving era."
Explanation:
According to the article, as a result of the perceived demand for autonomous cars in the next few years, this has led to a heightened desire among commercial carmakers to develop driverless technology.
For example, carmakers such as Audi, Toyota have stated projections about the commercial availability of driverless cars.
include a sketch of your stepped cylindrical shaft, showing all diameters, fillet radii, and keyways. also note where bearings will be placed. use the failure criteria in chapter 7 to determine the minimum diameters at the critical locations on the shaft. design keys to transmit torque between the two gears and the shaft. shaft design constraints: the intermediate shaft must be designed as a solid shaft of length no larger than 300 mm. the shaft will be supported by two 15 mm wide ball bearings (you are not required to specify the bearings). minimum distance between the bearings and the next installed part on the shaft must be 20 mm, to facilitate good lubrication and cooling of the components within the gear box. distance between the two gears should be between 80 mm and 140 mm. clearly indicate how the two gears will be installed on the intermediate shaft and create a shaft layout before moving to the next step. you are to perform static and fatigue analysis for the shaft. for the fatigue analysis assume a reliability of 99%, a minimum required life of 107 cycles and light-shock loading. use appropriate materials for the shaft and indicate if heat treatments are required for any regions of the shaft. the minimum design factor for any region of the shaft should be 1.2.
Answers
The selection of shaft keys is critical in preventing premature failure of keyed joints. Shaft keyways and keys are used to transmit torque from shafts to mechanical transmission elements such as gears, pulleys, and so on.
What is shaft keys?A key to preventing early failure of keyed joints is choosing the right shaft key. The use of a keyed joint allows for the transmission of torque from shafts to mechanical transmission components like gears, pulleys, etc. They can be produced using a standard stock material, like key stock, or they can be specially machined to fit the application.
According to various standards like BS4235, the nominal shaft diameter is typically used to specify the key size, and the commonly accessible rectangular key is used for the majority of applications. As a result, the standards do not specify the key material or joint limitations, and a keyed joint is oversized to support all loads.
There are four main groups of shaft keys:
Sunk keySaddle keyTangent keyRound keysStainless steel or medium carbon steel are typically used to make shaft keys. To suit various application environments, they can be made from a wide variety of materials, including bronze, copper, brass, and aluminum alloy. For example, stainless steel grade for use in food service equipment and brass or bronze keys for marine propeller shafts.
Key steel is typically supplied in accordance with BS46 and BS4235 and is a medium carbon steel that is unalloyed and has a respectable tensile strength. Due to their ideal blend of strength, toughness, and favorable machining properties, unalloyed medium carbon steels with carbon contents ranging from 0.25% to 0.60% are used.
The table below lists a few popular shaft key materials along with their Ultimate Tensile Strength (UTS). ↓↓↓
Learn more about Ultimate Tensile Strength
https://brainly.com/question/27983434
#SPJ4
2) Consider schedules S3, S4, and S5 below. Determine whether each schedule is strict, cascadeless, recoverable, or non-recoverable. You need to explain your reason.
S3: r1(x), r2(z), r1(z), r3(x), r3(y), w1(x), c1, w3(y), c3, r2(y), w2(z),w2(y),c2
S4: r1(x), r2(z), r1(z), r3(x), r3(y),w1(x),w3(y), r2(y),w2(z),w2(y), c1,c2, c3
S5: r1(x), r2(z), r3(x), r1(z), r2(y), r3(y), w1(x), c1, w2(z), w3(y), w2(y), c3, c2
Answers
Answer:
Explanation:
Consider schedules S3, S4, and S5 below. Determine whether each schedule is strict, cascadeless, recoverable, or non-recoverable. You need to explain your reason.
S3: r1(x), r2(z), r1(z), r3(x), r3(y), w1(x), c1, w3(y), c3, r2(y), w2(z),w2(y),c2
S4: r1(x), r2(z), r1(z), r3(x), r3(y),w1(x),w3(y), r2(y),w2(z),w2(y), c1,c2, c3
S5: r1(x), r2(z), r3(x), r1(z), r2(y), r3(y), w1(x), c1, w2(z), w3(y), w2(y), c3, c2
Strict schedule:
A schedule is strict if it satisfies the following conditions:
Tj reads a data item X after Ti has written to X and Ti is terminated means aborted or committed.
Tj writes a data item X after Ti has written to X and Ti is terminated means aborted or committed.
S3 is not strict because In a strict schedule T3 must read X after C1 but here T3 reads X (r3(X)) before Then T1 has written to X (w1(X)) and T3 commits after T1.
S4 is not strict because In a strict schedule T3 must read X after C1, but here T3 reads X (r3(X)) before T1 has written to X (w1(X)) and T3 commits after T1.
S5 is not strict because T3 reads X (r3(X)) before T1 has written to X (w1(X))
but T3 commits after T1. In a strict schedule T3 must read X after C1.
Cascadeless schedule:
Cascadeless schedule follows the below condition:
Tj reads X only? after Ti has written to X and terminated means aborted or committed.
S3 is not cascadeless schedule because T3 reads X (r3(X)) before T1 commits.
S4 is not cascadeless schedule because T3 reads X (r3(X)) before T1 commits.
S5 is not cascadeless schedule because T3 reads X (r3(X)) before T1 commits or T2 reads Y (r2(Y)) before T3 commits.
But while come to the definition of cascadeless schedules S3, S4, and S4 are not cascadeless, and T3 is not affected if T1 is rolled back in any of the schedules, that is,
T3 does not have to roll back if T1 is rolled back. The problem occurs because these
schedules are not serializable.
Recoverable schedule:
Schedule that follows the below condition:
-----Tj commits after Ti if Tj has?read any data item written by Ti.
Ci > Cj means that Ci happens before Cj. Ai denotes abort Ti. To test if a schedule is
recoverable one has to include abort operations. Thus in testing the recoverability abort
operations will have to used in place of commit one at a time. Also the strictest condition is
------where a transaction neither reads nor writes to a data item, which was written to by a transaction that has not committed yet.
If A1?>C3>C2, then schedule S3 is recoverable because rolling back of T1 does not affect T2 and
T3. If C1>A3>C2. schedule S3 is not recoverable because T2 read the value of Y (r2(Y)) after T3 wrote X (w3(Y)) and T2 committed but T3 rolled back. Thus, T2 used non- existent value of Y. If C1>C3>A3, then S3 is recoverable because roll back of T2 does not affect T1 and T3.
Strictest condition of schedule S3 is C3>C2.
If A1?>C2>C3, then schedule S4 is recoverable because roll back of T1 does not affect T2 and T3. If C1>A2>C3, then schedule S4 is recoverable because the roll back of T2 will restore the value of Y that was read and written to by T3 (w3(Y)). It will not affect T1. If C1>C2>A3, then schedule S4 is not recoverable because T3 will restore the value of Y which was not read by T2.
You are provided with the following information about a municipal wastewater treatment plant. This plant uses the traditional activated sludge process. Assume the microorganisms are 60 percent efficient at converting food to biomass, the organisms have a first order death rate constant of 0.1/day, and the microbes reach half of the maximum growth rate when the BOD5 concentration is 22 mg/L. There are 220,000 people in the community (their wastewater production is 225 L/day-capita, 0.1 kg BOD5/capita-day). The effluent standard is BOD5 = 20 mg/L and TSS = 20 mg/L. Suspended solids were measured as 4,000 mg/L in a wastewater sample obtained from the biological reactor, 16,500 mg/L in the secondary sludge, 230 mg/L in the plant influent, and 110 mg/L in the primary clarifier effluent. SRT is equal to 4.5 days.
(a) what is the design volume of the aeration basin (m3)?
(b what is the plant’s aeration period (days)?
(c) How many kg of secondary dry solids need to be processed daily from the treatment plants?
(d) if the sludge wastage rate (Qw) is increased in the plant, will the solids retention time go up, go down, or remain the same?
(e) Determine the F/M ratio in units of kg BOD5/kg MLVSS-day.
(f) What is the mean cell residence time?
Answers
(a) The design volume of the aeration basin can be calculated by multiplying the wastewater flow rate by the hydraulic retention time.
(b) The plant's aeration period is the hydraulic retention time, which can be calculated by dividing the design volume of the aeration basin by the wastewater flow rate.
(c) The daily processing of secondary dry solids can be determined by multiplying the sludge wastage rate by the mixed liquor volatile suspended solids (MLVSS) concentration.
(d) If the sludge wastage rate (Qw) is increased in the plant, the solids retention time (SRT) will go down.
(e) The F/M ratio, which represents the food to microorganisms ratio, can be calculated by dividing the influent BOD5 load by the MLVSS concentration.
(f) The mean cell residence time (MCRT) can be determined by dividing the MLVSS concentration by the waste sludge production rate.
(a) To calculate the design volume of the aeration basin, we multiply the wastewater flow rate (given as 225 L/day-capita) by the total number of people (220,000) and the hydraulic retention time (SRT of 4.5 days).
(b) The plant's aeration period is equal to the hydraulic retention time, which can be calculated by dividing the design volume of the aeration basin by the wastewater flow rate.
(c) To determine the daily processing of secondary dry solids, we need to multiply the sludge wastage rate (Qw) by the MLVSS concentration. The MLVSS concentration can be obtained from the suspended solids measurements.
(d) If the sludge wastage rate (Qw) is increased in the plant, it means more solids are being wasted from the system, which leads to a decrease in the solids retention time (SRT).
(e) The F/M ratio, representing the food to microorganisms ratio, can be calculated by dividing the influent BOD5 load (given as 0.1 kg BOD5/capita-day multiplied by the number of people) by the MLVSS concentration. The MLVSS concentration can be obtained from the suspended solids measurements.
(f) The mean cell residence time (MCRT) can be determined by dividing the MLVSS concentration by the waste sludge production rate. The waste sludge production rate is given as the sludge wastage rate multiplied by the MLVSS concentration.
The calculations in this wastewater treatment plant scenario involve various parameters and formulas related to the activated sludge process. By understanding the given information and applying the appropriate equations, we can determine key design parameters and operational characteristics of the plant.
The design volume of the aeration basin is obtained by considering the wastewater flow rate and the desired hydraulic retention time. The aeration period, which is the same as the hydraulic retention time, indicates the time taken for wastewater to pass through the aeration basin.
The processing of secondary dry solids is determined by the sludge wastage rate and the concentration of mixed liquor volatile suspended solids (MLVSS). Increasing the sludge wastage rate will reduce the solids retention time (SRT) in the system.
The F/M ratio is an important parameter that represents the food available to the microorganisms, and it is calculated using the influent BOD5 load and the MLVSS concentration.
The mean cell residence time (MCRT) indicates the average time a microorganism spends in the system. It is determined by dividing the MLVSS concentration by the waste sludge production rate.
Overall, these calculations provide insights into the design and operation of the wastewater treatment plant, helping to optimize its efficiency and performance.
Learn more about design volume
brainly.com/question/33341111
#SPJ11
all very good airmen do bench tests. (True or False)
Answers
False.
The statement "all very good airmen do bench tests".
Bench tests are designed to evaluate an airman's technical knowledge and ability to perform specific tasks, often in a simulated or controlled environment. However, there are many other factors that contribute to being a "very good" airman, such as communication skills, teamwork, leadership, and adaptability. Furthermore, not all airmen have the same job responsibilities or technical requirements. Airmen who work in administrative or support roles may not require the same level of technical expertise as those who work directly with aircraft or other complex equipment. While bench tests can be an important tool for assessing an airman's technical abilities, they are not the only factor that determines whether someone is a "very good" airman. The qualities and skills that make an airman successful can vary depending on their job responsibilities and the specific needs of their unit or organization.For such more questions on bench tests
https://brainly.com/question/15724895
#SPJ11
the engine needs a free flow of clean air to operate correctly and with low emissions. True or False
Answers
Answer:
true
Explanation:
Sketch a stone bridge, a steel bridge, a wood bridge, and a reinforced concrete bridge. Describe how their shape is related to the properties of the material.
Answers
The shape of a bridge is determined by the material it's made of. Bridges are made from different materials such as wood, steel, stone, and reinforced concrete.
Stone bridge: A stone bridge is built from stone blocks or stones that are cut and fitted together. The shape of a stone bridge is typically arched or curved. This is because stone is a very heavy and dense material that can withstand a lot of pressure. The arched shape of the stone bridge helps distribute the weight of the bridge evenly across the supporting pillars.
Steel bridge: A steel bridge is made from steel beams or trusses. The shape of a steel bridge is typically angular and geometric. This is because steel is a very strong material that can be easily molded and shaped into different shapes. The angular shape of the steel bridge helps distribute the weight of the bridge evenly across the supporting pillars. The shape also helps provide stability and prevent the bridge from swaying or moving in high winds.
Tok now more about bridge visit:
https://brainly.com/question/1843692
#SPJ11
Which component in an ignition system is responsible for raising the voltage?
Answers
The ignition coil is the crucial part in an ignition system that increases the voltage.
Why is this so important?It is essentially a transformer, capable of boosting the low voltage of a battery to the high voltage necessary for generating a spark at the plug - generally ranging between 20,000 and 50,000 volts.
The construction of the coil entails two coils of wire encircling an iron core, connected by either some breaker points or an electronic switch. As electricity passes through the primary coil, a magnetic field arises, inducing a high voltage in the secondary coil resulting in the generation of a spark.
Read more about voltage here:
https://brainly.com/question/1176850
#SPJ1
Use the power property to rewrite the expression. log3 ³√y
The Richter scale measures the intensity, or magnitude, of an earthquake. The formula for the magnitude R of an earthquake is R=log(a/T)+B, where a is the amplitude in micrometers of the vertical motion of the ground at the recording station, T is the number of seconds between successive seismic waves, and B is an adjustment factor that takes into account the weakening of the seismic wave as the distance increases from the epicenter of the earthquake. Use the Richter scale formula to find the magnitude R of the earthquake given that the amplitude is 460 micrometers, the time between waves is 3.7 seconds, and B is 2.7.
Answers
The power property states that loga a^x = x loga a = x.
Rewrite the expression log3 ³√y using the power property below:log3 ³√y = log3 (y^(1/3))= (1/3) log3 yNow, we need to use the given Richter scale formula to find the magnitude R of the earthquake.R = log(a/T) + BWhere,a = 460 micrometersT = 3.7 secondsB = 2.7Magnitude, R = log(a/T) + B= log(460/3.7) + 2.7= log(124.3243) + 2.7= 2.0948 + 2.7= 4.7948Therefore, the magnitude of the earthquake is 4.7948, rounded to four decimal places.Note: The Richter scale ranges from 0 to 10. The magnitude increases by a factor of 10 for each unit increase on the scale. So, a magnitude 5 earthquake is 10 times more powerful than a magnitude 4 earthquake, and a magnitude 6 earthquake is 100 times more powerful than a magnitude 4 earthquake.
To know more about magnitude
https://brainly.com/question/14154454
#SPJ11
control theories are different from classical theories in that:
Answers
Control theories are different from classical theories in that the former emphasizes on the reasons why people do not commit crime even when they have the opportunity and means to, while the latter emphasizes on the reasons why people commit crime.
More than 100 different control theories have been proposed since the 1960s.Explanation:Control theories are different from classical theories in that the former emphasizes on the reasons why people do not commit crime even when they have the opportunity and means to, while the latter emphasizes on the reasons why people commit crime.More than 100 different control theories have been proposed since the 1960s.
The control theories have been developed on the basis of several psychological and sociological concepts. The control theories have been influenced by the works of sociologists such as Travis Hirschi, Michael Gottfredson, and Robert Agnew among others.
To know more about theories visit:
https://brainly.com/question/6587304
#SPJ11
The standard overload protection for a 2 hp, 115 V, single phase motor has a nameplate rating of 21.50 A shall not be rated greater than __________________ amperes.
Answers
The standard overload protection for a 2 hp, 115 V, single phase motor has a nameplate rating of 21.50 A shall not be rated greater than 21.50 A amperes.
What is motor?
Motor is an electro-mechanical device which converts electrical energy into mechanical energy. It is widely used in industrial and domestic applications to produce rotational motion for machines. Motors are available in a variety of sizes and types, ranging from small DC motors to large AC synchronous motors. Motors are used to power a wide range of machines, from small fans and pumps to large industrial machines such as elevators, cranes, and conveyors. Motors can be powered by electricity, batteries, or fuel, and can be used to move objects in different directions. Motor control systems can be used to control the speed and direction of a motor, allowing for precise and efficient control of a machine. Motors are essential components of modern machines and are used in a wide variety of devices such as electric vehicles, robots, and home appliances.
To learn more about motor
https://brainly.com/question/13002418
#SPJ4
A switch that can open or close an electric circuit can be used to?
Answers
Answer:
When a switch is in the "off" position the circuit is open. Electric charges cannot flow when a switch is in the off position.
Explanation:
A switch that can open or close an electric circuit can be used to stop the flow of current.
What is a switch?A switch can be defined as an electrical component (device) that is typically designed and developed for interrupting the flow of current or electrons in an electric circuit.
This ultimately implies that, a switch that can open or close an electric circuit can be used to stop the flow of current.
Read more on switch here: https://brainly.com/question/16160629
#SPJ2
declare an array named taxrates of 5 elements of type double and initialize the elements (starting with the first) to the values 0.10, 0.15, 0.21, 0.28, 0.31, respectively.
Answers
To declare an array named tax rates of 5 elements of type double and initialize the elements to the values 0.10, 0.15, 0.21, 0.28, 0.31, respectively, you can use the following code: double[] tax rates = {0.10, 0.15, 0.21, 0.28, 0.31};
This code creates an array of type double with 5 elements and initializes each element with a specific value. The first element of the array, taxrates[0], is initialized to 0.10, the second element, taxrates[1], is initialized to 0.15, and so on.
An array is a collection of elements of the same data type. In this case, the data type is double, which means that each element of the array can hold a decimal number.
By declaring an array, you can store multiple values in a single variable. You can access the elements of an array by their index, which starts at 0 for the first element and increases by 1 for each subsequent element.
Initializing the array with specific values is useful when you want to use those values later in your program. In this case, the tax rates array could be used to calculate the amount of tax owed based on a given income.
You can learn more about tax rates at: brainly.com/question/30629449
#SPJ11
A motor hoists a 50-kg crate at constant speed to a height of h=6 m in 3 s. if the indicated power of the motor is 4 kw. Determine the motor's efficiency.
Answers
Answer:
24.52% efficiency
Explanation:
Knowns:
Mass = 50 kg
Height = 6 m
Time = 3 s
Indicated Power = 4 kW = 4000 W
Acceleration Due to Gravity = 9.81 m/s^2
Actual Power = Potential Energy / Time = mgh / t
Actual Power = (50 kg * 9.81 m/s^2 * 6 m) / 3 s = 981 W
Motor Efficiency = (Actual Power / Indicated Power) * 100 = (981 W / 4000 W) * 100 = 24.52%
el protozoos es del reino protista?
Answers
Answer: Si (Yes)
Explanation:
Answer:
Protozoario o protozoo es un organismo unicelular y eucariota (con núcleo celular definido) perteneciente al Reino protista. Los protozoarios se encuentran junto con los protófitos o algas simples, generalmente acuáticas, dentro del Reino protista o también denominado Reino protoctista.
Explanation:
to augment heat transfer between two flowing fluids, it is proposed to insert a 100-mm-long, 5-mm-diameter 2024 aluminum pin fin through the wall separating the two fluids. the pin is inserted to a depth of d into fluid 1. fluid 1 is air with a mean temperature of 10°c and velocity of 10 m/s. fluid 2 is air with a mean tempera- ture of 40°c and velocity of 3 m/s.
Answers
To augment heat transfer between the two flowing fluids, inserting a 100-mm-long, 5-mm-diameter 2024 aluminum pin fin through the wall is proposed.
How can the heat transfer performance of the pin fin be evaluated?The heat transfer performance of the pin fin can be evaluated using the concept of convective heat transfer coefficient and the equation for heat transfer rate. The convective heat transfer coefficient (h) is given by Newton's law of cooling, which states that the rate of heat transfer (Q) is proportional to the temperature difference (ΔT) between the fluid and the surface, and the convective heat transfer coefficient:
\[Q = h \cdot A \cdot \Delta T\]
where A is the surface area of the pin fin. The convective heat transfer coefficient can be calculated using empirical correlations based on the flow conditions and geometry of the pin fin.
For the given problem, the main factors affecting heat transfer are the fluid velocities and temperatures. By calculating the convective heat transfer coefficients for fluid 1 and fluid 2, and considering the thermal conductivity of 2024 aluminum, the overall heat transfer coefficient and the heat transfer rate can be determined.
Learn more about flowing fluids
brainly.com/question/28727482
#SPJ11
a turbojet engine has tsfc = 1.1 h-1. what is its specific impulse? from the units, you should recognize that the weight based tsfc has been given. {ans.: 3273 s}
Answers
The specific impulse of this turbojet engine is 3273 seconds.
The specific impulse of a turbojet engine can be found using the equation:
Specific Impulse = 1 / (TSFC x g)
Where TSFC is the Thrust Specific Fuel Consumption and g is the acceleration due to gravity (9.81 m/s^2).
Given that the TSFC for this turbojet engine is 1.1 h^-1, we can plug this value into the equation and solve for the specific impulse:
Specific Impulse = 1 / (1.1 h⁻¹ x 9.81 m/s²)
Specific Impulse = 1 / (10.791 h⁻¹ m/s²)
Specific Impulse = 0.0926 h m/s²
Specific Impulse = 3273 s
Therefore, the specific impulse of this turbojet engine is 3273 seconds.
Learn more about specific impulse at https://brainly.com/question/29739697
#SPJ11
the must be placed on timbers or cribbed so as to spread the weight of the crane
Answers
The outrigger needs to be mounted on timbers or cribs so that the weight of the cargo and the crane are distributed over a large enough area.
What do you mean by outrigger?An outrigger is a beam that extends from a crane's bottom supports to increase the crane's stability. Whether they are extendable/retractable or of a fixed length, the beams often use a type of pad to transfer weights to the ground.
The two shapes of hydraulic outriggers are the most frequent. There is the H style, which consists of an extensible horizontal beam that is supported by a pair of square or round legs. The A frame is the alternative. These extend down at an angle rather than stretching out and down in the shape of an H.
No matter how they are made, they all have the same function: dispersing the crane's weight over a broader surface to create a solid, robust platform. Without them, crane vehicles' lifting capabilities would be severely limited.
When the outrigger legs are set up incorrectly or carelessly, serious accidents might happen. In fact, 80% of crane tipping occurrences, according to OSHA, are caused by operator error when they hoist more weight than the crane is capable of. And the inappropriate usage of outriggers is to blame for more than 50% of these mishaps. Therefore, it's crucial to check that the outriggers are correctly deployed before turning on the crane.
To learn more about outrigger, refer to:
brainly.com/question/30071707
#SPJ4
The complete question is:
The ______ must be placed on timbers or cribbed so as to spread the weight of the crane and the load over a large enough area.
B1) 20 pts. The thickness of each of the two sheets to be resistance spot welded is 3.5 mm. It is desired to form a weld nugget that is 5.5 mm in diameter and 5.0 mm thick after 0.3 sec welding time. The unit melting energy for a certain sheet metal is 9.5 J/mm3 . The electrical resistance between the surfaces is 140 micro ohms, and only one third of the electrical energy generated will be used to form the weld nugget (the rest being dissipated), determine the minimum current level required.
Answers
Answer:
I = 8975.95 A
Explanation:
Given :
Diameter of the nugget, D = 5.5 mm
Length of the nugget, l = 5.0 mm
Therefore, volume of the nugget,
\($ V = \frac{\pi}{4}D^2l$\)
= \($\frac{\pi}{4}(5.5)^25 = 118.73\ mm^3\)
Now, required melting energy, (M.E.) = 9.5 x V
= 9.5 x 118.73
= 1127.95 J
Given efficiency of the heat used from electric energy, η = 1/3
Then actual required energy = ME/η
= 1127.95 / (1/3) = 3383.84 J
We know that, electric energy (EE) = \($I^2Rt$\)
where, I is current, R is resistance and t is time in seconds.
3383.75 = \($I^2 \times 140 \times 10^{-6} \times 0.3$\)
I = 8975.95 A
technician a says number 1 diesel fuel is the most popular and widely distributed. technician b says number 1 diesel fuel is blended with number 2 to improve starting in cold weather. who is correct?
Answers
Both Technician A and Technician B are correct. Number 1 diesel fuel is the most popular and widely distributed, as stated by Technician A. However, it is also blended with Number 2 diesel fuel to improve starting in cold weather, as stated by Technician B.
Number 1 diesel fuel is a type of diesel fuel that is specifically designed for use in cold weather. It has a lower viscosity and is less likely to gel or freeze in cold temperatures. However, it also has a lower energy content and can result in lower fuel efficiency.
Number 2 diesel fuel is the most commonly used type of diesel fuel and is used in most diesel engines. It has a higher energy content and is more efficient, but it can gel or freeze in cold weather.
By blending Number 1 and Number 2 diesel fuel, it is possible to create a fuel that has improved cold weather starting characteristics while still maintaining good fuel efficiency. This is why Number 1 diesel fuel is often blended with Number 2 diesel fuel in cold weather.
Learn more about diesel fuel: https://brainly.com/question/26394703
#SPJ11
a commercial airliner has a dry mass of the aircraft 600 t and has a range of
9000 km using 150 t of hydrocarbon fuel. estimate the range of the aircraft
when burning the same volume of hydrogen (both gaseous and liquid). the
hydrocarbon heating value is 43,000 kj/kg and its density is 804 kg/m3
. the
gaseous and liquid hydrogen has heating value of 120 mj/kg. density of
liquid and gaseous hydrogen is 70 kg/m3 and 0.08 kg/m3.
Answers
The range of the aircraft when burning the same volume of liquid hydrogen is, 76.728km.
The range of the aircraft when burning the same volume of gaseous hydrogen is, 0.0885km
How to calculate the valueThe range of the aircraft when burning the same volume of liquid hydrogen is:
= 0.82868 × 43000 × (In 613.0597/600)
= 76.728km
Also, the range of the aircraft when burning the same volume of gaseous hydrogen is, 0.0885km
Learn more about hydrogen on
https://brainly.com/question/24433860
#SPJ1