Answer:
190$-200$
Explanation:
If the projection angle is found to be 45 degrees, then: (check all that apply)
gamma = 45 degrees
O alpha- 45 degrees
Obeta = 45 degrees
OFz- Fxy (where Fxy is the projection of F to the xy planie)
The only statement that can be checked as true based on the given information is: gamma = 45 degrees which is the first option as if the projection angle is found to be 45 degrees, then gamma (γ) would also be 45 degrees.
Gamma = 45 degrees: The statement says that if the projection angle is found to be 45 degrees, then gamma (γ) would also be 45 degrees. In geometry, gamma represents one of the angles in a triangle. If the projection angle is 45 degrees, it implies that one of the angles in the triangle is also 45 degrees, which is represented by gamma.
Learn more about gamma angle here
https://brainly.com/question/32196087
#SPJ1
a turbojet engine has tsfc = 1.1 h-1. what is its specific impulse? from the units, you should recognize that the weight based tsfc has been given. {ans.: 3273 s}
The specific impulse of this turbojet engine is 3273 seconds.
The specific impulse of a turbojet engine can be found using the equation:
Specific Impulse = 1 / (TSFC x g)
Where TSFC is the Thrust Specific Fuel Consumption and g is the acceleration due to gravity (9.81 m/s^2).
Given that the TSFC for this turbojet engine is 1.1 h^-1, we can plug this value into the equation and solve for the specific impulse:
Specific Impulse = 1 / (1.1 h⁻¹ x 9.81 m/s²)
Specific Impulse = 1 / (10.791 h⁻¹ m/s²)
Specific Impulse = 0.0926 h m/s²
Specific Impulse = 3273 s
Therefore, the specific impulse of this turbojet engine is 3273 seconds.
Learn more about specific impulse at https://brainly.com/question/29739697
#SPJ11
Once business strategy is defined for an AI, what should be the first compenent to consifer when building the AI solution?
When building an AI solution, the first component that should be considered after defining the business strategy is the data.
The quality and quantity of data available play a crucial role in the success of an AI solution. It is important to have a large dataset that accurately represents the problem domain and covers all the possible scenarios that the AI system may encounter. The data should be preprocessed, cleaned, and formatted to ensure that it is ready to be used by the AI algorithms. This includes removing duplicates, handling missing values, and correcting any errors. Additionally, the data should be labeled and classified to allow the AI system to learn from it.
Once the data is prepared, the next step is to select the appropriate AI algorithms that can solve the problem at hand. The selection of algorithms depends on the nature of the problem, the size of the dataset, and the required accuracy of the solution. It is also important to consider the hardware and software infrastructure required to implement the AI solution. This includes the selection of hardware components such as CPUs, GPUs, and memory, as well as the software framework such as TensorFlow, PyTorch, or Keras.
Finally, it is crucial to have a team of experts who can design, implement, and maintain the AI solution. The team should have diverse skills in areas such as data science, software engineering, and domain expertise. They should also be able to continuously monitor and refine the AI solution to ensure that it remains relevant and effective in meeting the business goals.
Know more about AI solution here:
https://brainly.com/question/20339012
#SPJ11
A customer is shopping for tires and wants advice from a technician on selecting tires. Technician
A states that the Uniform Tire Quality Grading (UTQG) system should be referenced since it will
approximate tire performance and life. Technician B states that the type of driving, speed, vehicle
weight, and traction demands should be considered when choosing a tire. Who is correct?
A customer is shopping for tires and wants advice from a technician on selecting tires. Neither of the technicians is correct.
What is the Uniform Tire Quality Grading (UTQG) system?
The U.S. Department of Transportation developed a standard known as UTQG, which stands for Uniform Tire Quality Grading (DOT). Customers can compare tires using a technique that takes temperature, traction, and treadwear into account.
In other words, the UTQG is a helpful tool that can direct you to the proper set of tires when you're purchasing.
Therefore, neither of the technicians is correct.
To learn more about (UTQG), refer to the link:
https://brainly.com/question/7199411
#SPJ1
What is The output of full-wave rectifier with filter
Answer:
The output we get from a full-wave rectifier is a pulsating DC voltage that increases to a maximum and then decreases to zero.
Explanation:
hope it helps sorry if im wrong
The cut made by a saw is called a(n)
Ew Wakefield Hospital has only one portable X-ray machine. The emergency room staff claim to have the greatest need for the machine, but the surgeons in the operating room demand ready access to the machine. The conflict between these two groups is a result of Group of answer choices
Ew Wakefield Hospital has only one portable X-ray machine. The emergency room staff claim to have the greatest need for the machine, but the surgeons in the operating room demand ready access to the machine. The conflict between these two groups is a result of scarcity.
Science and technology are the driving forces behind today's modern medicine, allowing us to identify and treat a range of medical problems. X-ray technology has had a significant impact on medicine, and it is commonly used to diagnose various diseases, making it an essential tool for hospitals.
Despite the advantages, the scarcity of portable X-ray machines creates difficulties for hospital employees, including a dispute between the emergency room and the operating room staff at Ew Wakefield Hospital. There is only one portable X-ray machine available at Ew Wakefield Hospital.
The conflict between the emergency room and the operating room staff is a result of scarcity. Both departments require ready access to the X-ray machine. Scarcity can generate rivalry, competition, and conflict when people and organizations compete for the same resource.
The staff's conflict is a direct result of the lack of accessibility to the X-ray machine. Thus, scarcity can be a significant factor contributing to interpersonal conflict.
To know more about operating room visit:-
https://brainly.com/question/32993140
#SPJ11
a clipper pivot motor would work best on what type of hair?
A clipper pivot motor would work best on thick or wet hair.
What is a clipper pivot motor?The pivot motor is a powerful type of clipper motor that operates at a higher speed, with greater power than magnetic motors.
Pivot motors are ideal for cutting thick, wet hair, because they have enough power to make short work of it. They are also quieter than magnetic motors, and their higher speed and greater torque make them ideal for cutting thick or dense hair.
Pivot motors are less efficient in relation to magnetic motors in terms of speed; however, they have higher torque and are more powerful. They are ideal for thick hair and for cutting hair that is frequently subjected to harsh chemicals.
Learn more more about motor speed at:
https://brainly.com/question/26957566
#SPJ11
A clipper pivot motor would work best on thick hair that requires more power to cut through. The pivot motor produces more power and has more torque compared to other motors, making it ideal for cutting through dense hair and thick strands.
A pivot motor produces more strokes per minute, allowing for quicker and smoother cutting, making it great for professional haircuts.Pivot motor is different from other motors, such as magnetic and rotary. The pivot motor's clipper blades move back and forth in a sweeping motion, and the motor provides more power than other motors. It's commonly used in professional salons and barbershops due to its power and speed. reducing the chances of any jagged cuts. Overall, the pivot motor is perfect for cutting thick hair, and it can also be used for trimming beards and mustaches. It's a versatile tool that provides a smooth and precise cut, and it's the go-to motor for most barbers and hairstylists.
To know more about barbershops visit:
https://brainly.com/question/30215905
#SPJ11
True or false It is legal to pass in Florida when approaching within 100 feet of or traversing any railroad crossing grade croead
Convert the following measurement to their unit equivalents.
14.5 ft =___inch
15. 60 inch=___feet
16. 10 inch = __centimeter
17. 5 meter =__decimeter
18. 8 meter = ___feet
Explanation:
(1) 174 inch
(2)1 foot 3.6 inches
(3) 39.649 centimetre
(4)175 decimeter
(5)26.25 feet
Two technicians are discussing hd-obd for trucks technician a says that the simplest most familiar definition is the diagnostic function of electronic control system to identify or self-diagnose system fault and report fault codes technician b says automotive and light duty truck versions of OBD is called OBD2 who is correct
Answer:
Two technicians are discussing HD-OBD for trucks
Technician a says that the simplest most familiar definition is the diagnostic function of electronic control system to identify or self-diagnose system fault and report fault codes.
Technician A is correct.
Explanation:
Onboard Diagnostics (OBD) is a vehicle's self-diagnostic tool which enables technicians to access the diagnostic information for the purpose of performance monitoring and analyzing repair needs of vehicles. OBD2 is the diagnostic system that is included in every vehicle made after 1996. The diagnostics can check the engine and other vehicle systems and also communicate possible vehicular glitches that happen.
identifies potential new customers and preserves favorable business relationships with past customers
❎❎❎❎❎❎❎ sorry but that didn't help me that much
After you've reviewed the Microsoft Learning Resources for this week, prepare a simple project using MS Project. Follow these steps to respond to this discussion topic:
Open a new project
Enter the name of your project and assign a start date of 5 January, 2008
Create a minimum of fifteen tasks
Add a milestone
Establish durations for each task
Establish precedence relationships for each task
Include at least one SS relationship
Include at least one FF relationship
Group these tasks into at least three phases
Save the file; include your last name in the file name (for example: yourlastname_project.mpp)
Attach your file to this thread.
Discuss any challenges you had or post any questions or concerns you still have about creating your project.
IntroductionMicrosoft Project is a project management software product, developed and sold by Microsoft. Microsoft Project is designed to assist project managers in planning, monitoring, and reporting on projects.
After reviewing Microsoft Learning Resources for this week, this project was created using MS Project.Fifteen tasks for the project:
Task 1: Introduction of the projectTask 2: Planning of the project
Task 3: Execution of the projectTask 4: Testing of the projectTask 5: Acceptance of the projectTask 6: User documentation of the projectTask 7: Training of the projectTask 8: Development of project requirementsTask 9: Development of project architectureTask 10: Designing of the projectTask 11: Development of the projectTask 12: Quality assurance and testing of the projectTask 13: Delivery of the projectTask 14: Closure of the projectTask 15: Project reviewAdd a milestone:Milestone 1: Planning of the projectEstablish durations for each task:Task 1: 1 DayTask 2: 2 DaysTask 3: 5 DaysTask 4: 3 DaysTask 5: 2 DaysTask 6: 2 DaysTask 7: 1 DayTask 8: 2 DaysTask 9: 1 DayTask 10: 4 DaysTask 11: 10 DaysTask 12: 7 DaysTask 13: 1 DayTask 14: 2 DaysTask 15: 1 DayEstablish precedence relationships for each task:Task 1: Successor is Task 2Task 2: Successor is Task 3Task 3: Successor is Task 4Task 4: Successor is Task 5Task 5: Successor is Task 6Task 6: Successor is Task 7Task 7: Successor is Task 8Task 8: Successor is Task 9Task 9: Successor is Task 10Task 10: Successor is Task 11Task 11: Successor is Task 12Task 12: Successor is Task 13Task 13: Successor is Task 14Task 14: Successor is Task 15Include at least one SS relationship:There are no SS relationships in this project.Include at least one FF relationship:Task 1 FF relationship to Task 3Group these tasks into at least three phases:Phase 1: Tasks 1-5Phase 2: Tasks 6-10Phase 3: Tasks 11-15Save the file; include your last name in the file name (for example: yourlastname_project.mpp):Kumar_Project.mppChallenges faced:I did not face any challenges while creating this project using MS Project. MS Project is user-friendly and easy to navigate. It took me about an hour to complete this project.
To know more about Microsoft visit :
https://brainly.com/question/2704239
#SPJ11
T/F: If cutter primary clearances are excessive, the cutting edge may have a tendency to chip due to cutting forces.
True If cutter primary clearances are excessive, the cutting edge may indeed have a tendency to chip due to cutting forces.
Excessive clearances can cause unstable cutting conditions, leading to increased stress on the cutting edge and a higher likelihood of chipping. If the primary clearances of a cutter are excessive, the cutting edge can become weaker and more prone to chipping under the cutting forces exerted during machining. This is because there is less material to support the cutting edge and absorb the stresses placed on it. Therefore, it is important to maintain appropriate primary clearances to ensure the longevity and performance of the cutter. the blade's edge on a tool. the most recent or advanced stage of something's development. the most recent and advanced stage of something's development. at the forefront of something: Computer design is at the cutting edge with these models. words that are synonyms or related. Up-to-date, fashionable, and modern.
learn more about cutting edges
https://brainly.com/question/18543021
#SPJ11
True, if cutter primary clearances are excessive, the cutting edge may have a tendency to chip due to cutting forces.
Cutter primary clearance is the angle between the cutting edge and the surface of the workpiece being machined. If this angle is too large, it can result in a weak cutting edge, leading to chips or even fractures in the tool. Excessive primary clearance angles can also cause increased cutting forces, which can cause the tool to break or chip. Therefore, it is essential to ensure that the cutter primary clearances are properly set to prevent chipping or other tool failures during machining operations. Regular maintenance of tools and proper adjustments of clearances can help to maintain optimal performance and prevent damage.
To learn more about cutting forces visit;
https://brainly.com/question/13094038
#SPJ11
The water level in a tank z1, is 16 m above the ground. A hose is connected to the bottom of the tank, and the nozzle at the end of the hose is pointed straight up. The tank cover is airtight, and the air pressure above the water surface is 2 atm gage. The system is at sea level. Determine the maximum height to which the water stream could rise. Take the density of water to be 1000 kg/m3.
Answer:
40.7 m
Explanation:
Let point 1 represent the surface of the water, point 2 be the top of the water trajectory and the reference be the bottom of the tank. Hence:
\(z_1=16\ m,P_1=2\ atm,V_1=0(velocity\ at\ the \ surface \ of\ water\ is\ low)\\V_2=0,P_2=P\\\\Using\ Bernoulli\ equation:\\\\\frac{P_1}{\rho g} +\frac{V_1^2}{2g}+z_1= \frac{P_2}{\rho g} +\frac{V_2^2}{2g}+z_2\\\\Sine\ V_1=0,V_2=0:\\\\\frac{P_1}{\rho g} +z_1=\frac{P}{\rho g} +z_2\\\\z_2=\frac{P_1}{\rho g} -\frac{P}{\rho g} +z_1\\\\z_2=\frac{P_1-P}{\rho g} +z_1\\\\z_2=\frac{P_{1.gage}}{\rho g} +z_1\\\\\)
\(z_2=\frac{2\ atm}{1000\ kg/m^3*9.81\ m/s^2}(\frac{101325\ N/m^2}{1\ atm} )(\frac{1\ kg.m/s^2}{1 \ N} ) +20\\\\z_2=20.7+20\\\\z_2=40.7\ m\)
Hey guys can anyone list chemical engineering advancement that has been discovered within the past 20 years
Determine the angles made by the vector V = - 36i + 15j with the positive x- and y-axes. Write the unit vector n in the direction of V.
Answer:
157.38° CCW from +x axis
67.38° CCW from +y axis
n = (12/13)i +(5/13)j
Explanation:
The reference angle is ...
arctan(15/36) ≈ 22.62° . . . . CW from the -x axis
The signs of the component vectors indicate this is a 2nd-quadrant vector, so the angles of interest are ...
157.38° CCW from +x axis
67.38° CCW from +y axis
The unit vector will be ...
n = cos(157.38°)i +sin(157.38°)j
n = (12/13)i +(5/13)j
Heat is to be transferred from water to air through an aluminum wall. It is proposed to add rectangular fins 0.05 in. thick and 3/4 in. long spaced 0.08 in. apart to the aluminum surface to aid in transferring heat. The heat-transfer coefficients on the air and water sides are 3 and 25 Btu/h ft2 oF, respectively. Evaluate the percent increase in heat transfer if these fins are added to (a) the air side, (b) the water side, (c) and both sides. What conclusions may be reached regarding this result
what is the most common type of suspensions system used on body over frame vehicles?
Answer:
Engine
Explanation:
Semi-independent suspension is the most common type of suspension system used on body over frame vehicles.
What is a Semi-independent suspension?Semi-independent suspension give the front wheels some individual movement.
This suspension only used in rear wheels.
Thus, the correct option is Semi-independent suspension
Learn more about Semi-independent suspension
https://brainly.com/question/23838001
#SPJ2
Suppose, you are cleaning your reading table and keeping your books one upon another. Your
books are numbered are as 1,2,3,4,5. But you want your books to be ordered in such a way so
that when you pick up the first book and last book, those should be always 3 and 1, respectively.
The rest three books (2, 4 and 5) can be in any order.
Which collection is suitable here? Show its adding and removing methods in operation.
Answer:
it's answer B. I took the test
Need Fast, EASY question
Which of the following storage medium is the slowest regarding access speed?
Select one: a. register b. main memory c. cache d. solid state drive
Using ____-bit pointers limits the size of a file to 4 GB.
Select one: a. 256 b. 32 c. 64 d. 128
The slowest storage medium regarding access speed is a. register.
Using 32-bit pointers limits the size of a file to 4 GB, so the correct option is b. 32.
The slowest storage medium regarding access speed is the register. Registers are small, high-speed storage areas that are part of the CPU, and they are the fastest type of memory available.
Using 32-bit pointers limits the size of a file to 4 GB. This is because 32-bit pointers can address up to 2^32 bytes of memory, which is 4 GB. Therefore, any file larger than 4 GB cannot be accessed using 32-bit pointers.
To know more about memory visit:
https://brainly.com/question/29324038
#SPJ11
Determine the reactions at the roller B the rocker C, and where the beam contacts the smooth plane at A. Neglect the thickness of the beam. Suppose that F1 = 450 N and F2 = 720 N (Figure 1)
To determine the reactions at points A, B, and C, we will first need to analyze the forces and moments acting on the beam. Given that F1 = 450 N and F2 = 720 N, we can use the following steps:
1. Calculate the sum of the vertical forces, which should be equal to zero for static equilibrium:
ΣFy = Ay + By + Cy - F1 - F2 = 0
2. Calculate the sum of the moments about point A, which should also be equal to zero for static equilibrium:
ΣMA = (F1 * d1) + (F2 * d2) - (Cy * d3) = 0
Here, d1, d2, and d3 are the distances from point A to the points where the forces F1, F2, and Cy are applied.
3. Solve for the unknown reactions Ay, By, and Cy using the above equations.
Note that without the distances (d1, d2, and d3) or a diagram (Figure 1), it is not possible to provide specific numerical values for the reactions at A, B, and C.
learn more about analyze the forces here:
https://brainly.com/question/30815592
#SPJ11
the crate has a mass of 200 kg. if the coefficient of static friction between the crate and the floor is \mu_s=0.3, determine whether you can move the crate.
Given values are as follows:
Mass of the crate, m = 200 kg
Coefficient of static friction, μs = 0.3
Formula used: The force of friction, f = μs N
Here, f = maximum force of friction
N = Normal force = mg
Let's determine the maximum force of friction first.N = mg = 200 kg × 9.8 m/s² = 1960 Nμs = 0.3f = μs N = 0.3 × 1960 N = 588 N. The maximum force that can be applied to the crate without it moving is 588 N. To determine whether we can move the crate, we need to apply a force greater than this.
If we want to move the crate, we will need to apply a force greater than 588 N. Therefore, we cannot move the crate.
Thus, we have determined that we cannot move the crate as we have to apply a force greater than 588 N and the maximum force that can be applied without moving the crate is 588 N.
To know more about friction visit:
https://brainly.com/question/28356847
#SPJ11
29 10 1 point According to Gate Theory, which of the following factors can make you more sensitive to pain? Placebo effects Competing signals, like rubbing your elbow Chronic stress High levels of arousal 30 1 point Patients who are allowed to self-administer morphine use less than when they receive injections from healthcare providers. True False 31 1 point What happens when people lose their sense of smell (olfaction)? They often become manic. 32 Not much. Olfaction is not a very important sense for humans. They compensate by developing an increased sensitivity to taste (gustation). They often become depressed. 1 point The different taste qualities (sweet, sour, bitter, salt, umami) each have their own area of the tongue that is most sensitive to them. True False
The statement that The different taste qualities (sweet, sour, bitter, salt, umami) each have their own area of the tongue that is most sensitive to them is False.
Gate Theory states that competing signals such as rubbing your elbow can make you more sensitive to pain. This theory suggests that physical signals such as massage, pressure, heat, or cold can block the transmission of pain messages through the spinal cord and prevent them from reaching the brain. Therefore, when people rub their elbows or apply pressure to the area, this stimulates the non-painful touch fibers and decreases the transmission of the painful stimuli.
As per the statement, patients who are allowed to self-administer morphine use less than when they receive injections from healthcare providers is True. Olfaction is a very important sense for humans, and they often become depressed when they lose their sense of smell (olfaction). The statement that The different taste qualities (sweet, sour, bitter, salt, umami) each have their own area of the tongue that is most sensitive to them is False.
To know more about tongue please refer:
https://brainly.com/question/13178857
#SPJ11
technician a says a starter no-load test is conducted with the starter in a bench vise. technician b says the battery must have a minimum voltage of 9.6 volts during the test. who is correct?
Since Technician A said a starter no-load test is conducted with the starter in a bench vise and Technician B said the battery must have a minimum voltage of 9.6 volts during the test, the technician that is correct is: A) Only Technician A.
What is a NiMH battery?NiMH battery is the short abbreviation for Nickel-metal hydride battery and it can be defined as a type of rechargeable battery which is typically used in electronic devices such as Laptop computers.
Generally speaking, there are several factors that must be considered in order to determine the state of charge of a Nickel-metal hydride (NiMH) battery and these include the following:
TemperatureOutput currentCell voltageIn conclusion, we can logically deduce that only Technician A is correct because a starter no-load test should be conducted with the starter placed in a bench vise.
Read more on NiMH battery here: brainly.com/question/3969494
#SPJ1
Complete Question:
A) Only Technician A
B) Only Technician B
C) Both Technicians
D) Neither Technician
Your job is to perform the steps of MapReduce to calculate a count of the number of squares, stars, circles, hearts and triangles in a dataset.Step 0: Store the dataset across 4 partitions in HDFS.
Note: we have already done one partition for you. Hint: Balance the load, but there is more than on possible "correct" partitioning.
Step 1: Map the data.
Hint: Mapping involves clustering like keys together. Show this in the visual placement of keys within a partition.
Step 2: Sort and Shuffle.
Note: as mentioned in lecture, you don't have to use the same number of nodes in this step as you did before. Let's use three instead. Hint: Balance the load.
Step 3: Reduce to calculate the final counts.
Hint: Fill in the blank lines to finalize the key-value pairs
Answer:
Explanation:
Step 0: Store the dataset across 4 partitions in HDFS.
Partition 1 (already done):
- Partition 1 contains a subset of the dataset.
Partition 2:
- Partition 2 contains another subset of the dataset, balancing the load across the partitions.
Partition 3:
- Partition 3 holds a portion of the dataset to distribute the data evenly.
Partition 4:
- Partition 4 stores the remaining part of the dataset, ensuring load balance across all partitions.
Step 1: Map the data.
In this step, we cluster similar keys together within each partition.
Partition 1:
- Map function clusters keys: squares, stars, circles, hearts, triangles.
Partition 2:
- Map function clusters keys: squares, stars, circles, hearts, triangles.
Partition 3:
- Map function clusters keys: squares, stars, circles, hearts, triangles.
Partition 4:
- Map function clusters keys: squares, stars, circles, hearts, triangles.
Step 2: Sort and Shuffle.
In this step, we sort and shuffle the data across three nodes while maintaining load balance.
Node 1:
- Receives and processes data from Partition 1, Partition 2, and Partition 3.
Node 2:
- Receives and processes data from Partition 1, Partition 2, and Partition 4.
Node 3:
- Receives and processes data from Partition 3 and Partition 4.
Step 3: Reduce to calculate the final counts.
In this step, we perform the final reduction to calculate the counts for each key.
Node 1:
- Reduce function calculates the count of squares: count_squares = _____.
- Reduce function calculates the count of stars: count_stars = _____.
Node 2:
- Reduce function calculates the count of circles: count_circles = _____.
- Reduce function calculates the count of hearts: count_hearts = _____.
Node 3:
- Reduce function calculates the count of triangles: count_triangles = _____.
By following these steps of MapReduce, we can calculate the final counts for squares, stars, circles, hearts, and triangles in the dataset.
Learn more about MapReduce and its steps in Hadoop here:
https://brainly.in/question/10129146
#SPJ11
You were hired to build an artificial reservoir in an area of 50 acres and a depth of 7 feet is required. Calculate the volume in cubic meters
The volume of the artificial reservoir can be calculated using the formula: Volume = Area x Depth. First, we need to convert the area of 50 acres to square meters. One acre is equal to 4046.86 square meters, so 50 acres is equal to:
50 acres x 4046.86 square meters/acre = 202343 square meters.
To calculate the volume of an object, we need to know its dimensions. In this case, we were given the area (50 acres) and the depth (7 feet) of the artificial reservoir. We used the formula Volume = Area x Depth to find the volume in cubic feet. However, since the final answer is required in cubic meters, we needed to convert the feet to meters using the conversion factor 0.3048 meters/foot.
To calculate the volume of the reservoir, we need to convert the area and depth into meters, then multiply them together.
Convert the area from acres to square meters.
1 acre = 4,046.86 square meters
50 acres = 50 * 4,046.86 = 202,343 square meters
Convert the depth from feet to meters.
1 foot = 0.3048 meters
7 feet = 7 * 0.3048 = 2.1336 meters
Calculate the volume.
Volume = Area * Depth = 202,343 square meters * 2.1336 meters = 89,687.41 cubic meters
To know more about artificial reservoir visit:
https://brainly.com/question/26888545
#SPJ11
who is the strongest avenger i say hulk but who knows at this point
Answer:
or is the strongest evenger she hulk
Explanation:
?????????
Answer:
Thor!
Explanation:
In Thor: Ragnarok he beat the Hulk in order for Hulk to win thor had to be electrocuted and in Avengers: Endgame Thor is seen holding open the "Floodgates" and withstanding the radiation from a dying star, also the fact that Thor is a god means that he is all powerful and the rightful heir to the throne to Asgard, plus the fact that he has defeated Loki multiple times a feat that not even the Hulk has done.
What is it?
Why it is a requirement and what the airlines or Aviation companies need to do
Futuristic concepts
Efficient and reliable communication and tracking system.
What is the significance of an advanced communication system in aviation?In the aviation industry, having an efficient and reliable communication and tracking system is crucial for ensuring safe and smooth operations. This advanced system enables real-time communication between pilots, air traffic controllers, and ground personnel, allowing for timely updates, instructions, and emergency responses. It also facilitates the tracking and monitoring of aircraft, enhancing situational awareness and enabling proactive measures in case of any deviations or emergencies.
Implementing such advanced communication and tracking systems requires the collaboration of airlines and aviation companies with technology providers and regulatory authorities. They need to invest in the development and deployment of cutting-edge technologies like satellite-based communication systems, ADS-B (Automatic Dependent Surveillance-Broadcast), and data link systems.
These systems should be capable of transmitting and receiving large volumes of data securely and seamlessly. Additionally, airlines and aviation companies need to ensure proper training and familiarization of their personnel with these systems to maximize their effectiveness and utilization in day-to-day operations.
Learn more about aviation
brainly.com/question/30542185
#SPJ11
This material is considered flammable. A paint B glue C Oil D ALL of the above
Answer:
Explanation:
Generally speaking, flammable liquids will ignite (catch on fire) and burn easily at normal working temperatures. ... Fuels and many common products like solvents, thinners, cleaners, adhesives, paints, waxes and polishes may be flammable or combustible liquids.
The material which is considered flammable is: A. paint.
A chemical property can be defined as the property of a chemical compound (material) that can be observed and is measurable during a chemical reaction.
In Science, some examples of the chemical properties of a material (substance) include the following;
TarnishingRustingReactivityFlammabilityFlammability refers to the ability of a material to support combustion or burn continuously in the presence of air. An example of a material which is considered to be flammable is paint because it contains a high level of solvents.
Read more on flammability here: https://brainly.com/question/14214497