Stick pusher is installed in aircraft when:A) The a/c has not yaw damper installed.B) The a/c is used in supersonic speeds.C) The aircraft is directional unstable.D) The a/c has failed to meet the stalling requirements by normal category.

The accuracy of a digital multimeter might be stated by the manufacturer as +0.5 % reading + 1 digit".

A digital multimeter has been known  an instrument that has been used to measure a plethora of electrical settings. The multimeter able to read voltage, current, resistance, among others.

This allows the user to be able to make sure that the wiring of an object is done properly and will not lead to electrocution or a short circuit.The MIN/MAX feature of a digital multimeter is being used to evaluate an oxygen sensor.

Therefore, The accuracy of a digital multimeter might be stated by the manufacturer as +0.5 % reading + 1 digit".

Learn more about  multimeter on:

https://brainly.com/question/30809641

#SPJ9

The new plant would require 4 forging cells.

The proportion is  10.07%.

Total available working time per year:

24 hours/day * 5 days/week * 50 weeks/year

= 6,000 hours/year

Total parts required including scrap:

800,000 forgings / (1 - 0.03)

= 800,000 / 0.97

≈ 824,742 forgings

Number of batches required:

824,742 forgings / 1,250 parts per batch

≈ 660 batches

Total forging time (excluding changeover time) for 824,742 parts:

1.5 minutes/part * 824,742 parts * (1 hour / 60 minutes)

≈ 20,618.55 hours

Total changeover time for 660 batches:

660 batches * 3.5 hours/changeover

≈ 2,310 hours

Total time required to produce 824,742 forgings, including changeovers:

20,618.55 hours + 2,310 hours

≈ 22,928.55 hours

Now, considering the availability of each cell during operation (96%):

Effective operation time required

= 22,928.55 hours / 0.96

≈ 23,883.49 hours

Now, we can determine the number of forging cells needed to meet production requirements:

Number of cells = Total time required / Total available working time

= 23,883.49 hours / 6,000 hours/year

≈ 3.98

Therefore, the new plant would require 4 forging cells.

B. Proportion of time spent in setup = 2,310 hours / 22,928.55 hours ≈ 0.1007

The proportion of time spent in setup for each batch is approximately 10.07%.

Read more on equipment manufacturer here:https://brainly.com/question/31257529

#SPJ1

Answer:

Past tense of hear = heard

Answer:

If you are driving below 40 mph, you should leave at least one second for every 10 feet of vehicle length.

The gain parameter of current-controlled voltage sources is measured in volts per ampere (V/A).

This parameter defines the relationship between the input current and the output voltage of the source. A positive gain value indicates that an increase in the input current results in an increase in the output voltage, while a negative gain value indicates an inverse relationship between the input current and output voltage. The gain parameter is an important characteristic of current-controlled voltage sources and is used in many electrical and electronic applications, such as amplifier circuits, power supplies, and motor control systems. In summary, the gain parameter is measured in volts per ampere (V/A) and determines the relationship between the input current and output voltage of a current-controlled voltage source.

Learn more about voltage here,

https://brainly.com/question/27861305

#SPJ11

It sounds like you are asking about a motor compressor unit that is protected from overloading by a separate overload relay.

A particular amount of amps of current are chosen to trigger the overload relay.

Selecting an overload relay with a trip point that is appropriate for the motor rating will help to guarantee that the motor compressor unit is protected appropriately. Given that the motor in this instance has a 32 amp rating, the overload relay should be set to trigger at currents no greater than 32 amps. By doing this, you can make sure that the overload relay trips and turns the engine off before it sustains damage from too much current.

It's crucial to regularly check the overload relay to make sure it's working properly.

To know more about Motor Compressor kindly visit
https://brainly.com/question/14456994

#SPJ4

Given the Z-transform of impulse response of a stable LTI system is:

\(h(z) = 2z / (z-1)\)

we have to decompose the above rational Z-transform to partial fractions. This is done by applying the partial fraction decomposition techniques.

\(h(z) = 2z / (z-1) = A / (z-1) + Bz\)

After the multiplication of (z-1) on both sides, we get

\(2z = A + Bz(z = 1) => A = 2z = 2\)

\(B = 2 / (z-1)\) Now, h(z)

\(h(z) = 2 / (z-1) + 2z / (z-1)^2\)

Now, we know the Z-transform of unit impulse function δ(n), which is:

\(Z{δ(n)} = 1\)

the Z-transform of h(n) can be expressed as:\(H(z) = Z{h(n)} = 2 / (z-1) + 2z / (z-1)^2\)Now, applying the inverse Z-transform on H(z), we get the h(n), as follows:

\(h(n) = L^-1 {H(z)} = L^-1 { 2 / (z-1) } + L^-1 { 2z / (z-1)^2 }\)

\(h(n) = 2δ(n) + 2n u(n)\) Where,\(L^-1 { 2 / (z-1) } = 2δ\)(n)and,\(L^-1 { 2z / (z-1)^2 } = 2n u(n)\)

Therefore, the impulse response h(n) for the given Z-transform is 2δ(n) + 2n u(n).

To know more about Z-transform visit:-

https://brainly.com/question/32622869

#SPJ11

The question is asking for the availability of a Wi-Fi router with an MTB (Mean Time Between) failure of 10 months. However, the provided numbers and information seem to be unrelated to the calculation of availability. To calculate availability, we need the uptime and the total time.

To calculate the availability of the Wi-Fi router, we need to know the uptime and downtime values. However, the given information does not provide these values. Without the uptime and downtime, it is not possible to calculate the availability accurately.

Availability is typically calculated using the following formula:

Availability = Uptime / (Uptime + Downtime)

It is important to note that availability is a measure of how reliably a system or service is accessible to users. It is usually expressed as a percentage, where higher percentages indicate better availability.

To know more about information visit:

https://brainly.com/question/31592475

#SPJ11

Answer:

analysis of the load-bearing requirements of the facility

Explanation:

The statement that evaluates to True when the `intDays` variable contains the number 5 is `If intDays = 5 Then`.In the given question, we are asked to determine the statement that evaluates to True when

the `int Days` variable contains the number 5.The different statements given are:a. If intDays = 5 Thenb. If intDays <> 0 Thence. If int Days > 1 Thind. all of the aboveOut of these, the only statement that evaluates to True when the `intDays` variable contains the number 5 is `If intDays = 5 Then`.Therefore, the answer to the given question is option a. If intDays = 5 Then.The other options are as follows:b. If intDays <> 0 Then evaluates to True for all values of `intDays`, except 0.c. If intDays > 1 Then evaluates to True for all values of `intDays` greater than 1.d. All of the above does not evaluate to True when `intDays` contains the number 5.

To know more about evaluates  visit:

brainly.com/question/12837686

#SPJ11

Answer:

b remains the same

Explanation:

voltage and amps have no connection

the electricity used to rin your clothes dryer is normally 220V 18-24A

the voltage in your car's battery is usually 12V 20-30A

see they are approximately the same amperage but very different voltage

Structural walls constructed with cold-formed steel use heavier gauge studs. These studs are at least 20 gauge and could be as much as 12 gauge.

Cold-formed steel is a popular choice for structural walls due to its strength and durability. Heavier gauge studs, ranging from at least 20 gauge to as much as 12 gauge, are used in these walls to provide added stability and support. The gauge of a stud refers to its thickness, with lower gauge numbers indicating thicker studs. Using thicker studs increases the load-bearing capacity of the wall, making it able to withstand heavier loads and providing a higher level of structural integrity. Additionally, thicker gauge studs also offer greater fire resistance and acoustic insulation, making them a versatile option for construction projects. As a result, cold-formed steel walls using heavier gauge studs are a popular choice in both residential and commercial building construction.

Learn more about construction materials here;

https://brainly.com/question/17083292

#SPJ11.

The location of the volume's center of gravity by rotating the shaded region around the z axis. The substance is homogeneous. Z=2.50 feet for ZoverBar.

A body's geometric center is known as the centroid of volume. If the body's density is constant throughout, the centroid of volume serves as both the center of mass and the center of gravity. The ratios of integrals over the volume of the body are used to define the centroid of volume.

The center of mass is the same as the centroid of the volume if a continuous mass distribution has uniform density, which implies that is constant.

To know more about center of gravity visit :-

https://brainly.com/question/20662119

#SPJ4

It can provide measurements of stars with a higher angular resolution than is possible with conventional telescopes.

The thermo-elastic stress-strain relationship is important in understanding the behavior of materials under different thermal and mechanical conditions, and it has important implications for the design and performance of many engineering systems.

For such more question on stress-strain

https://brainly.com/question/13110518

#SPJ11

As a result, a triangle's area is equal to half the sum of its base and height. Triangle area equals base x height / 12.

Heron of Alexandria (c. 62 ce) is credited with developing the Heron's formula, which determines the system of a triangle in terms of the lengths of its sides. If the side lengths are represented by the symbols a, b, and c: Area is equal to the square root of (a + b + c)/2, where s is half the perimeter.

#include<stdio.h>  

                  int main()  

                  { float b ,h, area;  

           b= 5;  

                                      h= 13;  

           area = (b*h) / 2 ;  

           printf("\n\n Area of Triangle is: %f",area);  

                      return (0);  

   }  

Learn more about system here-

https://brainly.com/question/27162243

#SPJ4

Check balls used in the valve body of a vehicle are constructed of imidized plastic.

A check ball is used in one of those valve configurations to permit or prevent fluid passage. A check ball in a pocket that is submerged in the fluid can block and unblock an orifice that fluid is passing through or attempting to pass through as a result of fluid pressure.

Because they conform to the ball seats on the separator plate, the Sonnax imidized plastic balls seal better than steel balls.

Therefore, plastic imidized check balls are utilized in the valve body of a vehicle.

To learn more about check balls, refer to the link:

https://brainly.com/question/24745369

#SPJ1

Answer:

I dont think you can blur text in google docs

Technician A is correct in stating that the piston is manufactured slightly oval in shape, while Technician B's statement regarding the piston pin being oval is incorrect.

The oval shape of the piston is intentional and serves an important purpose in engine operation. The oval shape allows for a tighter fit between the piston and the cylinder wall.

During engine operation, the piston undergoes intense heat and pressure, causing it to expand. The oval shape compensates for this expansion by ensuring a more uniform and consistent contact with the cylinder wall. This helps to maintain a proper seal and minimize any potential leakage of combustion gases.

On the other hand, Technician B's statement about the piston pin being oval in shape for heat expansion and lubrication is incorrect. The piston pin, also known as the wrist pin, is a cylindrical component that connects the piston to the connecting rod. Its shape is typically cylindrical and not oval.

The purpose of the piston pin is to allow the piston to pivot and move freely along the connecting rod, facilitating the reciprocating motion of the engine.

Visit here to learn more about motion:

brainly.com/question/26083484

#SPJ11

When you or anyone in your vehicle is not correctly restrained, the citation you will receive depends on the state where the violation took place. However, the citation will generally range from $25 to $200. Below are some examples of the fines for not wearing seat belts in different states:

In Arkansas, the fine for not wearing a seat belt is $25.In California, the fine for a first offense for not wearing a seat belt is $20. For subsequent offenses, the fine is $50.In Florida, the fine for not wearing a seat belt is $30. For subsequent offenses, the fine is $60.In Louisiana, the fine for not wearing a seat belt is $25. For subsequent offenses, the fine is $50.In New York, the fine for not wearing a seat belt is $50.In Ohio, the fine for not wearing a seat belt is $30.In Texas, the fine for not wearing a seat belt is $25. For subsequent offenses, the fine is $50.However, the cost of the citation is not the only reason why it is important to wear seat belts. Seat belts save lives and can prevent serious injuries in the event of a crash. It is essential that you wear your seat belt every time you are in a moving vehicle.

for more such question on subsequent

https://brainly.com/question/26762554

#SPJ11

The segment of code in which the process may change common variables, update tables, write into files is known as critical section.

Critical section is a code segment that can be accessed by one process at a time. In a concurrent system, processes may access a common resource, such as shared memory space, hardware, or a shared file, and if two or more processes concurrently access the same resource, the problem of race condition occurs. Therefore, a critical section is a part of code that must be guarded by synchronization to avoid conflicts between two processes accessing the same resource, causing unwanted behavior.

In a critical section, the shared resource can only be accessed by one process at a time. It ensures that the data is consistent and avoids race conditions. Synchronization mechanisms such as mutex, semaphore, monitors, and others are used to enforce mutual exclusion, and only one process at a time can execute the critical section. Therefore, the process must gain exclusive control of the shared resource before entering the critical section.

Learn more about Critical section here: https://brainly.com/question/28185431

#SPJ11

Positive correlations of handle steeper incline of bicycle is a. Light weight frame.

A positive relationship implies that as one variable increments, the other variable moreover increments. Within the setting of cycling, handle steepness can influence the rider's pose and consolation level, which in turn can impact components such as speed, continuance , and generally performance.

Hence, Components which will influence the relationship between handle steepness and cycling execution might incorporate the rider's wellness level, the landscape being ridden on, the sort and quality of the bike components, and other person inclinations or variables.

Learn more about Positive correlations from

https://brainly.com/question/29972433

#SPJ1

The term that refers to the act of extracting characters or substrings from a larger string when applied to text strings is called "parsing".

Parsing is a process of analyzing text or a sequence of symbols according to a set of predefined rules or syntax. In the context of text strings, parsing involves breaking down a large string of characters into smaller components or substrings, based on a certain set of rules or patterns. These patterns could be defined by regular expressions or other parsing techniques.

For example, when parsing a sentence, one might want to extract only the subject or the verb, or the entire phrase between two specific words. Similarly, when parsing an email address, one might want to extract only the username or the domain name.

Overall, parsing is an important concept in computer science, particularly in natural language processing and text processing applications, where it allows for efficient and accurate analysis and manipulation of text data.

Learn more about parsing here brainly.com/question/31041915

#SPJ4

An engineer troubleshooting a network connection problem identifies a port flapping problem.

The engineer should investigate the following possible causes:

Therefore, the engineer should investigate all of the above options as possible causes of the port flapping problem.

Learn More About network connection

https://brainly.com/question/28342757

#SPJ11

Technician B is correct.

Who is a technician?

A professional with training in the methods and skills associated with a particular area of technology and a working knowledge of the underlying engineering principles is known as an engineering technician.

A technician might create prototypes, carry out research and experiments, and design and test equipment, depending on the field.

Along with problem-solving, strategy development, and quality control, technical engineers also carry out these tasks. In order to design, develop, test, and produce tools, engines, machines, and other devices, mechanical engineers need the assistance of technicians and technologists in the field.

To learn more about a technician, use the link given
https://brainly.com/question/28989511
#SPJ4

Answer:

class TriangleNumbers

{

public static void main (String[] args)

{

 for (int number = 1; number <= 10; ++number) {

  int sum = 1;

  System.out.print("1");

  for (int summed = 2; summed <= number; ++summed) {

   sum += summed;

   System.out.print(" + " + Integer.toString(summed));

  }

  System.out.print(" = " + Integer.toString(sum) + '\n');

 }

}

}

Explanation:

We need to run the code for each of the 10 lines. Each time we sum  numbers from 1 to n. We start with 1, then add numbers from 2 to n (and print the operation). At the end, we always print the equals sign, the sum and a newline character.

Answer:

Get ready and comfortable.

List all of the tasks you need to accomplish over the next week. .

Next schedule everything.

Get a planner/calender.

Cut those tasks that do not fit into your

The one that describes braking from a brake chamber containing a power spring is a spring applied and air-released service brake. The correct option is D.

Spring brakes, unlike service brakes, are not air applied. They apply when air pressure is released from the brake chamber and release when air pressure is restored. Spring brakes and service brakes use different types of brake chambers.

The braking power of spring brakes is determined by how well the brakes are adjusted. If the brakes are not properly adjusted, neither the regular nor the emergency/parking brakes will function properly.

A spring applied and air-released service brake is the one that describes braking from a brake chamber containing a power spring.

Thus, the correct option is D.

For more details regarding spring brake, visit:

https://brainly.com/question/28099237

#SPJ1

Eclipsing stars have orbital planes that are parallel to the sky's plane. Since the length of ingress and the length of the eclipse rely on the disparity in the diameters of the stars

The orbital inclination over which eclipses can occur depends on the relative diameters of the stars, but in general, only a tiny percentage of the known binary systems will be observed to experience eclipses. The varying light has two functions. Since the length of ingress and the length of the eclipse rely on the disparity in the diameters of the stars, it enables the estimation of the respective radii of the stars. That is, if Δt1 is the total time between first and last contact, and Δt2 is the period of totality, assuming that the eclipse is annular or total, then.

Learn more about system here-

https://brainly.com/question/27162243

#SPJ4

An engineer would indicate the unit of measurement used in a design in millimeters.

The primary unit of measurement is the stocking unit of measure for a given item in a specific organization. You must define an item attribute that serves as the primary unit of measurement when creating each item.

Because the technical drawings are scaled, engineers, architects, and builders may create the items according to exact specifications.

When understanding scales, the number on the left relates to the measurement of the drawing, while the number on the right represents the actual size of the object.

Therefore, a millimeter is used in a design.

To learn more about measurements, refer to the link:

https://brainly.com/question/28390923

#SPJ1