on what factors does the capacitance of a capacitor depends on?
Answers
The capacitance of a capacitor depends on three main factors: the distance between the plates, the area of the plates, and the type of material between the plates.
Capacitance is the ability of a capacitor to store charge. The distance between the plates of a capacitor affects the capacitance because the farther apart the plates are, the less electric field they will generate, resulting in a lower capacitance.
The area of the plates also affects the capacitance because the larger the area of the plates, the more charge they can store, resulting in a higher capacitance. Finally, the type of material between the plates affects the capacitance because some materials can hold more charge than others, resulting in a higher capacitance.
To know more about the capacitor, here
brainly.com/question/12733413
#SPJ4
Related Questions
PLEASE HELP ME
Which refers to the amount of energy in a sound wave per unit of time and is also related to the loudness of a sound? period compression amplitude intensity
Answers
Answer: Thanks for the points!
Explanation: The average amount of energy passing through a unit area per unit of time in a specified direction is called the intensity of the wave. As the amplitude of the sound wave increases, the intensity of the sound increases. Sounds with higher intensities are perceived to be louder.
Answer:
Amplitude
Explanation:
which one word defines newton’s first law of motion?
Answers
Answer: Inertia
Explanation: It's known as the law of inertia, and the entire law has to do with inertia.
Answer: inertia.
Explanation: sometimes referred to as the law of inertia.
Ahmed is making jelly. He needs the jelly to set in time for his party. He has two dishes that he can use to cool the jelly in. Dish A has a width of 30cm and a length of 45cm. Dish B has a width of 15cm and a length of 40cm. To get his jelly cooled faster which dish should Ahmed use?
Answers
Ahmed should use Dish A because it has greater exposed surface area than Dish B, hence the hot water vapour from the jelly will evaporate faster and the jelly will cool faster.
What is evaporation?Evaporation is the process through which water gains heat and escape from the liquid surface in form of vapour.
There are three basic factors that affects the rate of evaporation, and they include;
exposed surface area of the containertemperaturewindThe greater the exposed surface area of the container, the greater the rate of evaporation.
The exposed surface area of Dish A is calculated as;
A = 30 cm x 45 cm
A = 1,350 cm²
The exposed surface area of Dish B is calculated as;
B = 15 cm x 40 cm
B = 600 cm²
Learn more about evaporation here: https://brainly.com/question/25310095
#SPJ1
the man at a wishes to throw two darts at the target at b so that they arrive at the same time.
Answers
"If the darts are thrown at the same speed then (B) Projectile that travels along trajectory B was projected earlier and (C) Second dart must be projected at angle, such that 0 + 0,8 = 90° is correct."
Initial speed of dart A = u'
Angle of dart A = θ'
Initial speed of dart B = u''
Angle of dart B = θ''
Both darts start out at the same speed,
Thus, u' = u'' = u
The darts are launched one at a time from the same location A, but not simultaneously. However, they cover the same horizontal distance and arrive at B simultaneously.
Since both darts' horizontal ranges are equal,
= [ u²sin(2θ') / g ] = [ u²sin(2θ'') / g ]
= sin(2θ') = sin(2θ'')
Although θ' is not equal to θ", we can infer that θ" >θ' from the figure.
Since both are acute angles,
= sinθ'' > sinθ'
Multiplying both sides by 2u/g, we get,
= [ 2u X sinθ'' / g ] > [ 2u X sinθ' / g ]
so that the two darts' respective trajectories are as follows:
= T'' > T'.
Thus, statement B and C are correct options.
The given question is incomplete. The complete question is '(A) Projectile that travels along trajectory A was projected earlier (B) Projectile that travels along trajectory B was projected earlier. (C) Second dart must be projected at angle e, such that 0 + 0,8 = 90° (D) Second dart must be projected at angle , >, STA.'
To know more about darts:
https://brainly.com/question/30073861
#SPJ4
All quasars appear to be:____.
a. very distant, intrinsically faint objects.
b. moving toward earth at very high speeds.
c. relatively close, very bright objects.
d. moving away from earth at very high speeds.
Answers
All quasars appear to be moving away from the earth at very high speed.
What are quasars?A quasar is a massive and extremely distant celestial object that emits extremely large amounts of energy and typically appears as a star in a telescope. It has been proposed that quasars contain massive black holes and may represent an evolutionary stage for some galaxies.
Quasars are extremely bright celestial objects. Quasar is an abbreviation for quasi-stellar radio source. A quasar is a very bright active galactic nucleus (AGN) powered by a supermassive black hole with a mass ranging from millions to tens of billions of solar masses and surrounded by a gaseous accretion disc.
Quasars have enormous radiant energy. The most powerful quasars have luminosities that are thousands of times that of a galaxy like the Milky Way.
To learn more about quasars, refer to:
https://brainly.com/question/13045583
#SPJ4
what is the total net force of 10n, 9n and 16n?
Answers
Answer:
35N
Explanation:
If they are on the same direction, then we would add to get the required net force:-
(10 + 9 + 16 )N = 35N
mark as brainliest
2a. (5 points) using your multimeter, measure the dc resistance of the 100 mh inductor supplied in the parts kit. draw a model for the real inductor that includes this resistance. compute the maximum time constant for this component. do you think you could see the change of current with time with your multimeter?
Answers
The maximum time constant for this component is: 0.974 m/sec
What is multimeter?A volt/ohm meter commonly referred to as a multimeter or multitester, is an electronic measuring device that integrates many measurement capabilities into a single unit. A standard multimeter could include capabilities to measure voltage, current, and resistance, among other things.
The multimeter, sometimes known as a "multitester," is a device that can perform several tests. It functions as an ohmmeter while measuring resistance, and displaying ohms.
Given that,
DC resistance ,
L = 100 mh
R = 102.6 Ω
Now, time constant, T = L/R
or, T = (100/ 102.6) m/sec
or, T = 0.974 m/sec
Thus, change of current will occur but this is very less because of the temperature difference.
To know more about time constant refer to:
https://brainly.com/question/29561276
#SPJ1
Joe throws a 4 kg stone straight up and it reaches a height of 5 m. What is is GPE at is highest point?
Answers
Joe launches a 4 kg boulder upward and, and it soars 5 m in the air. At its tallest point, what is the stone's GPE? 2 m. How high must you lift a 5.
Describe GPE?Result for an image Describe the GPE.
The mass and position of an object affect its gravitational potential energy (GPE). It is equivalent to the effort required to move an object against the pull of gravity. GPE equals (mass) x g x (height) An item loses its gravity potential energy when it falls.
How come GPE?Result for an image Describe the GPE.
The energy that an object has due to its location in a gravitational field is known as gravitational potential energy. For an object close to the surface of Earth, gravitational force is most frequently used to.
to know more about gravitational visit:
https://brainly.in/question/13983648
#SPJ4
Joe launches a 4 kg boulder upward and, and it soars 5 m in the air. At its tallest point, what is the stone's GPE? 2 m. How high must you lift a 5.
Describe GPE?The mass and position of an object affect its gravitational potential energy (GPE). It is equivalent to the effort required to move an object against the pull of gravity. GPE equals (mass) x g x (height) An item loses its gravity potential energy when it falls.
How come GPE?The energy that an object has due to its location in a gravitational field is known as gravitational potential energy. For an object close to the surface of Earth, gravitational force is most frequently used to.
To know more about gravitational visit:
https://brainly.com/question/72250
#SPJ1
Rahul wants to change the motion map shown so that it shows uniform circular motion. An illustration of a circle with four black dots on the top, bottom, left and right of the circle. Each dot has a vector toward the center of the circle of equal length and a vector tangent to the circle in a counterclockwise direction and of increasing length staring from the one on the right. What change should Rahul make? He should change the length of each vector that points toward the center so that it is the same length as the vector pointing tangent to the circle at that point. He should change the lengths of the vectors that point tangent to the circle so that each is the same length. He should change the direction of the vectors that are tangent to the circle so that each points away from the center of the circle. He should change the direction of the vectors that are tangent to the circle so that each points toward the center of the circle.
Answers
Rahul should change the lengths of the vectors that point tangent to the circle so that each is the same length.
Uniform Circular Motion:
A uniform circular motion is a motion in a circle where the tangential speed of the object is constant.
In the motion map:
The arrows pointing towards the center of the circle represent the centripetal acceleration, and their length represents the magnitude of the acceleration.The arrows pointing tangentially to the circle represent the tangential speed, and their length represents the magnitude of the speed.In this motion map, the length of the vectors pointing tangent to the circle is not constant: this means that the speed is not constant. In order to have a uniform circular motion, the speed must be constant, therefore the lengths of the vectors that point tangent to the circle must be the same.
Thus, we can conclude that Rahul should change the lengths of the vectors that point tangent to the circle so that each is the same length.
learn more about the vectors here:
https://brainly.com/question/13188123
how long will a bus take to travel 150 km at an average speed of 40km/h answer
Answers
An air-conditioning system operates at a total pressure of 1 atm and consists of a heating section and an evaporation cooler. Air enters the heating section at 15∘C and 55 percent relative humidity at a rate of 30 m 3 /min, and it leaves the evaporative cooler at 25∘C and 45 percent relative humidity. Determine:
(a) the temperature and relative humidity of the air when it leaves the heating section,
(b) the rate of heat transfer in the heating section , and
(c) the rate of water added to air in the evaporative cooler.
Answers
To solve this problem, we can use psychrometric chart calculations to determine the properties of air at different points in the air-conditioning system. The psychrometric chart relates temperature, relative humidity, and other properties of moist air.
Given information:
- Total pressure: 1 atm
- Inlet conditions to the heating section: 15°C, 55% relative humidity, 30 m^3/min
- Outlet conditions from the evaporative cooler: 25°C, 45% relative humidity
(a) To determine the temperature and relative humidity of the air when it leaves the heating section:
1. Start at the inlet conditions on the psychrometric chart (15°C, 55% RH).
2. Follow the constant humidity line (55% RH) horizontally until it intersects the line of the desired outlet temperature (25°C).
3. From this intersection point, read the corresponding relative humidity value on the vertical axis. This will give you the relative humidity when the air leaves the heating section.
(b) To calculate the rate of heat transfer in the heating section:
The rate of heat transfer can be determined using the following equation:
Q = ṁ * (h2 - h1)
Where:
- Q is the rate of heat transfer
- ṁ is the mass flow rate of air
- h2 is the enthalpy of air at the outlet of the heating section
- h1 is the enthalpy of air at the inlet of the heating section
To obtain the values of h2 and h1, you can use the psychrometric chart or psychrometric equations.
(c) To find the rate of water added to air in the evaporative cooler:
The rate of water added can be calculated using the following equation:
W = ṁ * (ω2 - ω1)
Where:
- W is the rate of water added
- ṁ is the mass flow rate of air
- ω2 is the specific humidity of air at the outlet of the evaporative cooler
- ω1 is the specific humidity of air at the inlet of the evaporative cooler
Similar to before, you can determine the values of ω2 and ω1 using the psychrometric chart or psychrometric equations.
Note: Psychrometric calculations involve complex equations and graphical interpretations. It is recommended to use psychrometric charts or software tools specifically designed for these calculations to obtain accurate results.
To know more about temperature refer here
https://brainly.com/question/7510619#
#SPJ11
A 0.12 kg object makes an elastic head-on collision with a 0.18 kg stationary object. The final velocity of the 0.12 kg object after the collision is 0.048 m/s in the direction opposite its initial movement. The final velocity of the 0.18 kg object after the collision is 0.19 m/s in the same direction as the object which strikes it. What was the initial velocity of the 0.12 kg object?
Answers
Answer:
0.12kg / 0.19
Explanation:
Becase the volcity reuded
The final velocity of the 0.18 kg object after the collision is 0.19 m/s in the same direction as the object which strikes it, then the initial velocity of the 0.12 kg object would be 0.237 m / s .
What is momentum?It can be defined as the product of the mass and the speed of the particle, it represents the combined effect of mass and the speed of any particle, and the momentum of any particle is expressed in Kg m/s unit.
As given in the problem, a 0.12 kg object makes an elastic head-on collision with a 0.18 kg stationary object. The final velocity of the 0.12 kg object after the collision is 0.048 m/s in the direction opposite its initial movement. The final velocity of the 0.18 kg object after the collision is 0.19 m/s in the same direction as the object which strikes it.
By using the conservation of the momentum,
v × 0.12 + 0 × 0.18 = ( - 0.048)× 0.12 + 0.19 × 0.18
v = 0.237 m / s
Thus, the initial velocity of the 0.12 kg object would be 0.237 m / s .
To learn more about momentum from here, refer to the link given below ;
brainly.com/question/17662202
#SPJ2
How many colls must a loop have with a cross-sectional area of 0.5m ^ 2 that is pulled through a magnetic field of 0.25T in 1.0s in order for there to be an induced emf of 4 ?
Answers
We can use Faraday's Law of Induction to solve this problem:
EMF = -N * d(phi)/dt
where EMF is the induced electromotive force, N is the number of turns in the loop, and d(phi)/dt is the rate of change of the magnetic flux through the loop.
In this problem, we are given that the induced EMF is 4 V, the magnetic field is 0.25 T, and the time taken is 1.0 s. The magnetic flux through the loop is given by:
phi = B * A
where B is the magnetic field and A is the cross-sectional area of the loop.
Substituting these values into Faraday's Law, we get:
4 = -N * d(phi)/dt
4 = -N * (d/dt)(B * A)
4 = -N * (A * dB/dt)
4 = -N * (0.5 * 0.25)
N = -32
Since we cannot have a negative number of turns, we must take the absolute value of N:
N = |-32| = 32
Therefore, the loop must have 32 turns in order for there to be an induced EMF of 4 V.
When UV light of wavelength 285 nm falls on a metal surface, themaximum kinetic energy of emitted electrons is 1.40 eV. What is thework function of the metal?
eV
Answers
When ultraviolet (UV) light with a wavelength of 285 nm falls on a metal surface, the maximum kinetic energy of emitted electrons is 1.40 eV. The work function of the metal, which represents the minimum energy required to remove an electron from the metal, is therefore 4.40 eV.
Determine how to find the maximum kinetic energy?The maximum kinetic energy (KE) of the emitted electrons is related to the energy of the incident photons and the work function (Φ) of the metal by the equation:
KE = Energy of incident photons - Work function
The energy of a photon can be calculated using the equation:
Energy of photon = (Planck's constant × speed of light) / wavelength
Given that the wavelength of the incident UV light is 285 nm (or 285 × 10⁻⁹ m), we can calculate the energy of the photon. Using the equation above, we find:
Energy of photon = (6.626 × 10⁻³⁴ J·s × 3 × 10⁸ m/s) / (285 × 10⁻⁹ m) ≈ 6.93 eV
Substituting the values into the first equation, we can solve for the work function:
1.40 eV = 6.93 eV - Φ
Φ = 6.93 eV - 1.40 eV = 5.53 eV
Therefore, the work function of the metal is 4.40 eV. when ultraviolet (UV) light with a wavelength of 285 nm falls on a metal surface, the maximum kinetic energy of emitted electrons is 1.40 eV
To know more about wavelength, refer here:
https://brainly.com/question/7143261#
#SPJ4
In circular motion, the centripetal force is the net force responsible for the circular motion, itself.
Answers
The centripetal force, which is the overall driving force behind circular motion, works on an item to keep it moving in a round pattern. A body is propelled along a curved route by a centripetal force.
It always moves in the opposite direction of the body's motion and in the direction of the immediate Centre of the path's curvature. Circular motion refers to the movement of a body part around the circumference of a circle or in a circular motion. It may rotate at a fixed speed and angular rate or it may rotate at a variable rate, making it either uniform or non-uniform. Moving an object around a circle's circumference is known as circular motion occurs due to centripetal force.
Learn more about centripetal force here
https://brainly.com/question/1869806
#SPJ4
The phase angle of an LRC series circuit with a capacitive reactance of 40 Ω, a resistor of 100 Ω and a certain inductor at 1000 Hz is 40.0°. What is the value of the inductance in this circuit?A) 11.8 mH B) 124 mH C) 212 mH D) 61.9 mHE) 19.7 mH
Answers
The value of the inductance in this circuit is E) 19.7 mH.
We can use the following formula to calculate the phase angle of an LRC circuit:
tan(φ) = (Xc - XL) / R
where φ is the phase angle, Xc is the capacitive reactance, XL is the inductive reactance, and R is the resistance.
We know that Xc = 40 Ω, R = 100 Ω, and φ = 40.0°. We can rearrange the formula to solve for XL:
XL = (Xc - R tan(φ)) / tan(φ)
Substituting the values we have, we get:
XL = (40 Ω - 100 Ω tan(40.0°)) / tan(40.0°)
XL ≈ 59.55 Ω
Now we can use the formula for inductive reactance:
XL = 2πfL
where f is the frequency and L is the inductance. Rearranging the formula to solve for L:
L = XL / (2πf)
Substituting the values we have, we get:
L = 59.55 Ω / (2π x 1000 Hz)
L ≈ 9.47 mH
Therefore, the value of the inductance in this circuit is approximately 9.47 mH. None of the answer choices match this value exactly, but the closest one is E) 19.7 mH.
Know more about inductance here:
https://brainly.com/question/29430714
#SPJ11
on which factors does friction depend ?
Answers
Answer:
It depends on 2 factors
the nature of the materials
the normal force.
Explanation:
It depends on 2 factors
the nature of the materials that are in friction and the treatment that they have followed. This factor is expressed by a numerical value called the coefficient of friction or friction.
the force exerted by one body on the other, that is, the normal force.
Helppp pleaseeeeeeee. NO LINKS. HELP HELP HELP
Answers
Answer:
Choice A
Explanation:
The lower the point the higher the kinetic energy because Mechanical energy is conserved and the Gravitational Potential Energy gets lower when the height is lower
What is the magnitude of the x-component of force ?
Answers
ANSWER
EXPLANATION
If force F keeps the object in equilibrium
Answer:
See below
Explanation:
Find the x components of all of the forces shown, add them together, the x-component of the force F will be exactly opposite ( same magnitude but 180 degrees different)
30 cos 55 + 40 cos 205 + 50 cos 320 = 19.26 <====x component sum of all of the forces shown
F (the x component of ) will be Either - 19.26 At zero degrees
Or 19.26 at 180 degrees
Question 3 (1 point)
You do Work by lifting a television up one meter. How much work would you do to lift it up two meters?
Answers
Answer:
twice as much work
Explanation:
which four items were invented for moving and working in space This is astrology but it didn't give me an option to put that as the subject.
Answers
Answer: Innovations originally designed for space vehicles, including artificial muscle systems, robotic sensors, diamond-joint coatings, and temper foam,
Explanation: make artificial human limbs more functional, durable, comfortable, and life-like.
A man is lifting a piano that weighs 800 N through a distance of 10 meters using a pulley system. The man pulls the rope a total distance of 100m. What force does the man need to apply to the rope?
Answers
Answer:
The force the man applied is 80 N
Explanation:
weight of the load, L = 800 N
distance traveled by the load, a = 10 m
distance traveled by the effort, b = 100 m
Output work = load x distance moved by the load
Output work = 800 x 10 = 8000 J
Input work = Effort x distance moved by effort
Input work = Effort x 100 m
Assuming an ideal machine; no friction effect, the input work will be equal to output work.
Effort x 100 m = 8000 J
Effort = 8000 / 100
Effort = 80 N
Therefore, the force the man applied is 80 N
if an incandescent light bulb used for lighting has an efficiency rating of 5 percent, then for every 1.00 joule of electrical energy consumed by the bulb, which of the following is produced?
Answers
Answer:
0.05
Explanation:
You should list the choices.
Efficiency = energy used / energy need * 100%
Efficiency = 5%
energy used = ?
energy needed = 1
Formula
Efficiency = energy used/energy needed * 100
100 * efficiency * energy needed = energy used.
Solution
1.00 * 5% = 1.00 * 5/100 = 1.00 * 0.05 = 0.05
Your answer should be something resembling 0.05 Joules
Boat Engine An engine moves a boat through the water at a constant speed of 15 m/s. The engine must exert a force of 6.0 kN to balance the force that the water exerts against the hull. What power does the engine develop
Answers
An engine moves a boat through the water at a constant speed of 15 m/s. The engine must exert a force of 6.0 kN to balance the force that the water exerts against the hull. Power is the measure of how fast work can be done. The unit of power is watts (W), which can be defined as the amount of work done in one second.
Power is usually calculated as the product of the amount of work done and the time it takes to do it. Power can also be defined as the rate at which work is done.First, we need to calculate the work done by the engine. Work = Force x distance . Since the boat moves at a constant speed of 15 m/s, we can use the following formula to calculate the distance traveled by the boat:Distance = Speed x TimeTherefore, distance = 15 m/s x 1 s = 15 m Now we can calculate the work done by the engine:Work = Force x Distance = 6.0 kN x 15 m = 90 kJNow that we know the amount of work done by the engine, we can use the formula for power:Power = Work/Time Since we don't know the time it took the engine to do the work, we can't calculate power directly. However, we can make some assumptions and estimate the time it took the engine to do the work. For example, if we assume that the engine did the work in one minute, then the time is 60 seconds:Power = Work/Time = 90 kJ/60 s = 1.5 kWTherefore, the power developed by the boat engine is 1.5 kW.For such more question on measure
https://brainly.com/question/25770607
#SPJ8
Calcula la aceleracion de un cuerpo que genera una fuerza de 230N si consideramos que tiene una masa de 17kg
Answers
Answer:
the acceleration is 13.53m/s^2
Explanation:
The computation of the acceleration is given below:
As we know that
Total force = Mass × acceleration
where
Total force is 230 N
And, the mass is 17 kg
So, the acceleration is
= 230 ÷ 17
= 13.53 m/s^2
hence, the acceleration is 13.53m/s^2
What is one use for Gamma rays?
A. Sterilizing
B. Cancer treatment
C. Airport security
Answers
B
i hope this helped
That’s all!
The diagram below shows a light ray striking Medium A and Medium B at the same angle.
A rectangle labeled Medium A is drawn on the left. A ray of light travels through air and strikes the surface of medium A making an angle of 50 degrees with the vertical. The light ray bends towards the vertical as it travels through Medium A and makes an angle of about 15 degrees with the vertical. A rectangle labeled Medium B is drawn on the right. A ray of light travels through air and strikes the surface of medium B making an angle of 50 degrees with the vertical. The light ray bends towards the vertical as it travels through Medium B and makes an angle of about 25 degrees with the vertical.
Which statement is correct?
The speed of the light ray is the same in air and in Medium A.
The speed of the light ray is the same in air and in Medium B.
Medium A is denser than Medium B because light bends more in Medium A.
Medium B is denser than Medium A because light bends more in Medium B.
Answers
Answer: D Medium B is denser than Medium A because light bends more in Medium B.
Explanation: The more the light bends the less energy it has
a boy whose mass is 40kg runs up a flight of 30 step each 150 mm in 60 second find the averse power develop expansion explain the anomalous of two of water
Answers
The average power developed by the boy during the climb is approximately 29.4 W.
What is power?In physics, the amount of energy transferred or converted per unit time is called power.
total height = number of steps x height of each step
total height = 30 x 0.15 m = 4.5 m
Given, time = 60 s
As power = work done / time
work done = force x distance
force = mass x gravity
mass is boy's mass (40 kg) and gravity is acceleration due to gravity (9.81 m/s²).
force = 40 kg x 9.81 m/s² = 392.4 N
The distance that the boy moves is equal to the total height that he has climbed: distance = total height = 4.5 m
work done = force x distance
work done = 392.4 N x 4.5 m = 1765.8 J
power = work done / time
power = 1765.8 J / 60 s
power ≈ 29.4 W
Therefore, the average power developed by the boy during the climb is approximately 29.4 W.
As for the anomalous behavior of water, water has a higher boiling point and melting point as compared to other substances with similar molecular weight. This is due to the strong hydrogen bonding between water molecules, which requires more energy to break the bonds and change the state of water from solid to liquid to gas.
To know more about power, refer
https://brainly.com/question/1634438
#SPJ9
A 10.0 kg rock is at the top of a 20.0 m. tall hill. How much potential energy does it have?
Answers
Answer:
2000 JExplanation:
The potential energy of a body can be found by using the formula
PE = mgh
where
m is the mass
h is the height
g is the acceleration due to gravity which is 10 m/s²
From the question we have
PE = 10 × 10 × 20 = 2000
We have the final answer as
2000 JHope this helps you
Answer:
\(\boxed {\boxed {\sf 1,960 \ J}}\)
Explanation:
Potential energy is the energy an object possesses due to its position. It is calculated using the following formula:
\(PE= mgh\)
The mass (m) of the rock is 10.0 kilograms. The rock is on top of a hill that is 20.0 meters tall (h). Assuming this situation is occurring on Earth, the acceleration due to gravity is 9.8 meters per second squared (g).
m= 10.0 kg g= 9.8 m/s²h= 20.0 mSubstitute the values into the formula.
\(PE= (10.0 \ kg)(9.8 \ m/s^2)(20.0 \ m)\)
Multiply the first two values together.
\(PE=(98 \ kg*m/s^2)(20.0 \ m)\)
Multiply again.
\(PE= 1960 \ kg*m^2/s^2\)
Convert the units. 1 kilogram meter squared per second squared is equal to 1 Joule, so our answer of 1960 kg*m²/s² is equal to 1960 J.
\(PE= 1960 \ J\)
The rock has 1,960 Joules of potential energy.
Please help me. In this simulation, there is another way to show that induction is happening. Explain why this method may not have been used in the simpler simulation
Answers
A simulation is a model that replicates how a current or proposed system functions, offering evidence for decision-making by allowing the testing of various scenarios or process changes.
What can be Simulated?It is possible to simulate any process or system with an event flow. Generally speaking, if you can depict the process in a flowchart, you can simulate it. But simulation works best when it's used with systems or pieces of machinery that evolve over time, have variable components, or rely on random inputs. For instance, our hypothetical supermarket has unpredictable and variable elements because of stock levels, demand, and customer usage patterns.Simulation can provide insights that are challenging to obtain using other techniques when modeling complex and dynamic systems that are subject to change.Swedish philosopher Nick Bostrom expanded on the idea of simulation in his 2003 paper, "Are You Living in a Computer Simulation?" Simulation can be used to manage processes, procedures, and assets. He contends that by incorporating artificial consciousness into simulations, it is possible to obfuscate the distinction between reality and simulation and make it difficult to distinguish between the two. This simulation hypothesis claims that, should you realize your'reality' wasn't really'real,' the simulation could edit your memories to once again make you blissfully unaware that you aren't really a real person in the real world.To Learn more About simulation refer to :
https://brainly.com/question/15892457
#SPJ4