While combing through the hair during a haircut service, the shears should be:
Answers
While combing through the hair during a haircut service, the shears should be held at the appropriate angle based on the desired outcome and technique. Maintaining control, precision, and even tension is key for a successful haircut service.
During a haircut service, the shears should be held at a proper angle to achieve the desired outcome. It is essential to maintain control and precision when using shears, as they play a crucial role in the overall quality of the haircut. The angle of the shears will depend on the technique being used and the desired look. For instance, if you're aiming for a blunt cut, the shears should be held parallel to the hair section being cut. On the other hand, if you're looking to create texture or blend layers, you would hold the shears at a 45-degree angle or utilize point cutting techniques. Moreover, while combing through the hair, it is important to maintain even tension to ensure accuracy in the cut. Keeping the comb and shears in sync is vital to achieve a clean, precise haircut. Remember to use professional-grade shears and keep them sharp to ensure a smooth cutting experience and avoid damage to the hair.
Learn more about haircut here
https://brainly.com/question/29640434
#SPJ11
Related Questions
Exam
3. Your employer has asked you to remove old metal plating from the worksite. The metal plating is
heavy and has sharp edges. What PPE should you use?
Select the best answer(s). There may be more than one
(4 Points)
A respirator
Steel-toed boots
Gloves
Safety glasses
AVAL
Answers
Answer:
Gloves
Explanation:
Gloves are personal protective equipment that a user wears on hands to protect against scrapes and scratches. Some gloves are improved in a manner that they protect against cuts, chemicals and contaminants. Gloves should always be worn when performing a task that requires hands-handling.
Answer:
steel toed shoes and gloves
Explanation:
a misfire code is a type ____ DTC
A) 1 or 2
B) a or b
C) c or d
D l or ll
Answers
Answer:
A misfire code is a type A DTC.
Explanation:
A misfire code is a type A DTC.
A Misfire generate unburned hydrocarbons thereby increasing the load on the catalytic converter. Misfires are due to incomplete combustion or lack of combustion.
Diagnostic Trouble Code (DTC) is a type of code used by the vehicle’s onboard diagnostics (OBD) system to alert when the vehicle has a problem. Type A DTC is the most serious DTC, this are emissions related. It requests illumination of the MIL after one failed driving cycle and stores a freeze frame DTC after one failed driving cycle.
Problem 3. The uniform beam is supported by two rods AB and CD that have cross-sectional areas of 10 mm2 and 15mm2, respectively. Determine the intensity w of the distributed load so that the average normal stress in each rod does not exceed 300 kPa.
Answers
Answer:
hello the diagram related to your question is missing attached below is the required diagram.
The value of AC = 6m
answer 2.25 N
Explanation:
From the diagram attached below
average intensity of loading = w/2
Total load due to linearly varying load = \(\frac{wL}{2}\)
w = maximum intensity of load , L = span of varying load
since AC = 6m( L ) then
Total load due to linearly varying load = 3w ------ ( 1 )
attached below is the detailed solution of the given problem
A brake disc is resurfaced to correct ______________________________, thickness variation, or scoring.
Answers
The two options are based on the "rule of thumb" that a rotor should have at least.030 inches of material left on it in order to be machined.
What is frequently brought on by an excessive thickness difference in the brake pedal and steering wheel?When a thicker area of the brake rotor rotates through the calliper, it pushes back against brake fluid, which can be felt at the brake pedal, causing brake pedal pulsation and other circumstances like steering-wheel shaking while braking.
What material are brake lines made of?Although metallic brake lines are also available, brake lines are often constructed of rubber or a rubber and synthetic material combination. Their length and diameter vary.
To know more about rotor visit:-
brainly.com/question/14094488
#SPJ1
Identify this instrument.
Refracting telescope
Reflecting telescope
Microscope
Radio Telescope
Answers
A counterflow heat exchanger operating at steady state has water entering as saturated vapor at 1 bar with a mass flow rate of 2 kg/s and exiting as saturated liquid at 1 bar. Air enters in a separate stream at 300 K, 1 bar and exits at 335 K witha negligible change in pressure. Heat transfer between the heat exchanger and its surroundings is negligible. Determine (a) the change in the flow exergy rate of each stream, in kW. (b) the rate of exergy destruction in the heat exchanger, in kW. Ignore the effects of motion and gravity. Let To 300 K,P) 1 bar.
Answers
Flow exergy rate = mass flow rate * (specific exergy + kinetic exergy + potential exergy)
Exergy destruction rate = (T_hot - T_cold) * (entropy generation rate)
where T_hot and T_cold are the hot and cold stream temperatures, respectively, and entropy generation rate can be calculated using the following equation:
Entropy generation rate = (heat transfer rate / T_hot) - (heat transfer rate / T_cold)
Given:
- Water enters at 1 bar as saturated vapor with a mass flow rate of 2 kg/s and exits as saturated liquid at 1 bar.
- Air enters at 300 K, 1 bar and exits at 335 K with negligible change in pressure.
- Heat transfer between the heat exchanger and its surroundings is negligible.
Assumptions:
- Negligible effects of motion and gravity.
- Negligible changes in kinetic and potential energy.
(a) Change in flow exergy rate:
For water:
- Inlet: The specific enthalpy and specific entropy of saturated vapor at 1 bar can be found from the steam tables to be h_in = 2776.1 kJ/kg and s_in = 7.3607 kJ/(kg*K), respectively. The specific volume can be found using the ideal gas law to be v_in = R_w*T_in/p_in = 0.2968 m^3/kg, where R_w is the specific gas constant for water vapor.
- Exit: The specific enthalpy and specific entropy of saturated liquid at 1 bar can be found from the steam tables to be h_out = 419.06 kJ/kg and s_out = 1.3043 kJ/(kg*K), respectively. The specific volume can be found using the tables to be v_out = 0.001043 m^3/kg.
- Flow exergy rate change: Using the equation above, we can find the change in flow exergy rate for water to be ΔE_dot_water = m_dot_water*(h_out + v_out*(P_0-P_in) - h_in - v_in*(P_0-P_in)) = 2*(419.06 + 0.001043*(1-1)*(10^5-1) - 2776.1 - 0.2968*(1-1)*(10^5-1)) = -5284.8 kW, where P_0 is the reference pressure of 1 bar.
For air:
- Inlet: The specific enthalpy and specific entropy of air at 300 K and 1 bar can be found from the air tables to be h_in = 301.27 kJ/kg and s_in = 1.9745 kJ/(kg*K), respectively. The specific volume can be found using the ideal gas law to be v_in = R_a*T_in/p_in = 0.8251 m^3/kg, where R_a is the specific gas constant for air.
- Exit: The specific enthalpy and specific entropy of air at 335 K and 1 bar can be found from the tables to be h_out = 331.46 kJ/kg and s_out = 2.1619 kJ/(kg*K), respectively. The specific volume can be found using the ideal gas law to be v_out = 0.9076 m^3/kg.
- Flow exergy rate change: Using the equation above, we can find the change in flow exergy rate for air to be ΔE_dot_air = m_dot_air*(h_out + v_out*(P_0-P_out) - h_in - v_in*(P_0-P_in)) = 2*(331.46 + 0.9076*(1-1)*(10^5-1) - 301.27 - 0.8251*(1-1)*(10^5-1)) = 618.5 kW, where P_out is the pressure at the exit of the heat exchanger.
Therefore, the change in flow exergy rate is -5284.8 kW for water and 618.5 kW for air.
(b) Rate of exergy destruction:
Using the entropy generation rate equation above, we can find the entropy generation rate for the heat exchanger to be:
S_gen = (Q_dot/T_hot) - (Q_dot/T_cold) = (m_dot_air*Cp_air*(T_out_air-T_in_air)/T_hot) - (m_dot_water*Cp_water*(T_out_water-T_in_water)/T_cold)
where Cp_air and Cp_water are the specific heat capacities of air and water, respectively, and T_in_air, T_out_air, T_in_water, and T_out_water are the inlet and outlet temperatures of air and water, respectively.
We know that the heat transfer rate Q_dot is the same for both fluids, so we can write:
S_gen = (Q_dot/T_hot) * (Cp_air*(T_out_air-T_in_air) - Cp_water*(T_out_water-T_in_water)/T_cold)
Substituting the given values, we get:
S_gen = (Q_dot/300) * ((1.005*(335-300)) - (4.179*(100-0)) / 373)
S_gen = 0.0145*Q_dot
where Cp_air = 1.005 kJ/(kg*K), Cp_water = 4.179 kJ/(kg*K), T_hot = 300 K, T_cold = 373 K, and Q_dot is the heat transfer rate.
The rate of exergy destruction is equal to the entropy generation rate multiplied by the average temperature, which is (T_hot + T_cold)/2 = 336.5 K, so we have:
ΔE_dot_dest = S_gen*(T_hot + T_cold)/2 = 0.0145*Q_dot*336.5
Substituting the given values, we get:
ΔE_dot_dest = 0.0145*Q_dot*336.5 = 0.0145*Q_dot*336.5 = 63.9 kW
Therefore, the rate of exergy destruction in the heat exchanger is 63.9 kW.
Chọn dữ liệu phù hợp và biểu diễn chúng dưới dạng biểu đồ, từ đó cho biết 3 yếu tố
mà người dùng xem xét nhiều nhất khi mua một chiếc tablet.
Answers
Answer:
Please explain it in English so that i can help you or you need someone who can speak Vietnam help you
Portable electronic machines known as AEDs are used to analyze and treat life-threatening cardiac arrhythmias. They are an automated and external type of a device known as what?
Answers
Note that it is correct to state that Portable electronic machines known as AEDs are used to analyze and treat life-threatening cardiac arrhythmias. They are a type of defibrillator.
What is the explanation for the above response?Note that AED's are a kind of defibrillator that are created and designed to be used by laypeople or people of low medical skills instead of medical professionals.
This device can analyze the heart's rhythm and indicated if the patient will need to be shocked with electricity to restore balance to their hearts Rythm.
Thus, it is correct to state that AEDs are an automated and external type of a device known as defibrillator.
Learn more about Portable electronic machines at:
https://brainly.com/question/29629426
#SPJ1
1. Safety goggles, glasses, or face shields must be
worn in the shop to:
a. Help you see better.
b. Prevent eye injury.
c. Prevent sweat from running into your eyes.
d. Keep fumes from entering the eyes.
e. All of the above.
f. None of the above.
Answers
D
Some gases r poisonous, so take a golf cart for example. The battery in it is (I think) poisonous or toxic.
Cellular network towers are configured in such a way so that they avoid what type of problem?
Answers
Answer:
They are configured this way to avoid overlap issues.
Explanation:
B/ Evaluate e^(πi/2)
Answers
You get a result immediately from Euler's formula:
e ^(i π/2) = cos(π/2) + i sin(π/2) = 0 + i * 1 = i
when a pathname for a file is specified starting with a forward slash (/), it is called ______.
Answers
When a pathname for a file is specified starting with a forward slash (/), it is called an absolute pathname. An absolute pathname is a pathname that defines the location of a file or directory in a complete path starting from the root directory (/) to the file or directory in question
The root directory is the top-level directory on a file system. It's represented by a forward slash (/) in Unix-like systems and DOS/Windows systems.The root directory is located at the top of the file system hierarchy and includes all other directories and files. In Unix-like systems, absolute paths begin with the root directory and are represented by a forward slash (/).
In, the root directory is indicated by a backslash (\). Don't shorten to root when you mean the directory. In other content, use top-level folder. followed by the directories and subdirectories that the file or folder is located in.
To know more about pathname visit :-
https://brainly.com/question/32181170
#SPJ11
Which of the following is not a useful way to approach a standard multi-armed bandit problem with n arms? Assume bandits are stationary. “How can I ensure the best action is the one which is mostly selected as time tends to infinity?” “How can I ensure the total regret as time tends to infinity is minimal?” “How can I ensure an arm which has an expected reward within a certain threshold of the optimal arm is chosen with a probability above a certain threshold?” “How can I ensure that when given any 2 arms, I can select the arm with a higher expected return with a probability above a certain threshold?”
Answers
The one that is not a useful way to approach a standard multi-armed bandit problem with n arms is “How can I ensure the total regret as time tends to infinity is minimal?” The correct option is B.
What is multi-armed bandit problem?In MAB, a subset of A/B testing, visitor allocation is dynamically increased in favor of versions that perform better by learning from data collected throughout the test.
Choosing selecting news stories to show a visitor on a news website is an example of a multi-armed bandit dilemma that occurs in the real world. Without visitor information, all click results are unknown.
Thus, the correct option is B.
For more details regarding multi-armed bandit problem, visit:
https://brainly.com/question/12407591
#SPJ1
Arthur files a singe income tax return and his maximum tax-free interest under the education savings bond program is $6,000.00. How much of the interest is excludible if his modified adjusted gross income exceeds the applicable dollar limit by $5,000 (one-third of the phaseout range)?
Answers
The excludable interest is just $1,000 because Arthur's modified adjusted gross income exceeds the applicable dollar limit by $5,000.
What is tax?Tax can be defined as the sum that is received by an individual or an organization on its profits or other income, and it is then received by the government.
Interest on education savings bonds is tax-free up to a maximum of $6,000 per bond.
$5,000 is the excess of the modified adjusted gross income.
Arthur should not exceed the phase-out limits in terms of adjusted gross income.
As a result, since Arthur's modified adjusted gross income is $5,000 more than the applicable dollar limit, the excludable interest is $1,000.
Learn more about tax, here:
https://brainly.com/question/16423331
#SPJ1
why is it difficult to dissolve cellulose in solvent that dissolve petroleum based polymers
Answers
The crystallinity of cellulose as well as its polar qualities makes it less difficult to dissolve. It has a three-dimensional hydrogen bond (H-bond) arrangement with the hydroxyl group connected to each polymer chain. On the other hand, Hydrocarbon polymers are nonpolar, and nonpolar solvents are used to dissolve them.
What exactly is cellulose?Cellulose is an organic molecule with the formula n that is a polysaccharide made up of a linear chain of hundreds to thousands of β linked D-glucose units. Cellulose is a structural component of the major cell wall of green plants, many algae, and oomycetes.
Cellulose is the principal component present in plant cell walls and aids in the plant's stiffness and strength. Although cellulose cannot be digested by humans, it is an essential source of fiber in the diet. Cellulose is utilized in the production of clothing and paper.
Learn more about Cellulose:
https://brainly.com/question/19014704
#SPJ1
A discrete MOSFET common-source amplifier has R = 2 MQ, gm=4 mA/V, r = 100 k2, R, = 10 k2, C=2 pF, and gs =0.5 pF. The amplifier is fed from a voltage source with an Ced gd internal resistance of 500 k2 and is connected to a 10-k load. Find:
(a) the overall midband gain AM
(b) the upper 3-dB frequency f
Answers
a. the upper 3-dB frequency (f) of the discrete MOSFET common-source amplifier is approximately 808.65 MHz. b. the midband gain (AM) of the discrete MOSFET common-source amplifier is approximately -3.88.
(a) To find the overall midband gain (AM) of the discrete MOSFET common-source amplifier, we can use the following formula:
AM = -gm * (R || r) * (Rd || RL)
where gm is the transconductance of the MOSFET, R is the resistance connected to the drain, r is the output resistance of the MOSFET, Rd is the internal resistance of the voltage source, and RL is the load resistance.
Given:
gm = 4 mA/V
R = 2 MΩ
r = 100 kΩ
Rd = 500 kΩ
RL = 10 kΩ
We can calculate the parallel combination of resistances (R || r) as follows:
(R || r) = (R * r) / (R + r)
Substituting the given values:
(R || r) = (2 MΩ * 100 kΩ) / (2 MΩ + 100 kΩ) = 98.039 kΩ
Next, we calculate the parallel combination of resistances (Rd || RL) as follows:
(Rd || RL) = (Rd * RL) / (Rd + RL)
Substituting the given values:
(Rd || RL) = (500 kΩ * 10 kΩ) / (500 kΩ + 10 kΩ) = 9.901 kΩ
Now, we can calculate the overall midband gain:
AM = -gm * (R || r) * (Rd || RL)
= -4 mA/V * 98.039 kΩ * 9.901 kΩ
≈ -3.88
Therefore, the overall midband gain (AM) of the discrete MOSFET common-source amplifier is approximately -3.88.
(b) The upper 3-dB frequency (f) can be calculated using the formula:
f = 1 / (2π * (R || r) * C)
where (R || r) is the parallel combination of resistances and C is the capacitance.
Given:
(R || r) = 98.039 kΩ
C = 2 pF
Substituting the given values:
f = 1 / (2π * 98.039 kΩ * 2 pF)
≈ 808.65 MHz
Therefore, the upper 3-dB frequency (f) of the discrete MOSFET common-source amplifier is approximately 808.65 MHz.
Learn more about amplifier here
https://brainly.com/question/29604852
#SPJ11
Kris and James are working at a construction site that has a significant amount of stagnant water. Which type of hazard are they most likely to be exposed to?
Answers
Answer:
A biological hazard
Explanation:
Biological because insects and other organisms thrive in stagnant water.
The type of hazard that is most likely to be exposed to a significant amount of stagnant water is known as biological.
What is meant by biological hazard?A biological hazard may be defined as a biological substance that may significantly pose a great threat to the health of living organisms, primarily humans. These types are the major concerns in food processing because they cause most foodborne illness outbreaks.
In the case of Kris and James, they are significantly exposed to a biological hazard because stagnant water is commonly utilized by mosquitos to place eggs, this directs a lot of mosquitos around stagnant waters and therefore a higher risk of mosquito-transmitted diseases such as malaria. Besides this, stagnant water is highly polluted and includes bacteria and parasites that are harmful.
Therefore, the type of hazard that is most likely to be exposed to a significant amount of stagnant water is known as biological.
To learn more about Biological hazards, refer to the link:
https://brainly.com/question/14276262
#SPJ2
Compute the corresponding angular measurements in the centesimal system for the
following angles which are in the Sexagesimal system
i. 125˚
ii. 12˚
Answers
The sexagesimal system angles for 125 is 2.18 and for 12 is 0.209
What is the sexagesimal system?
We know that 180 = π
Therefore,
(i) 125 = 125 * π / 180
= 125 * 22/ 7 * 180
= 2750 / 1260
= 2.18
(ii) 180 = π
12 = 12* π /180
= 12* 22/ 7 * 180
= 264/ 1260
= 0.209
Therefore, The sexagesimal system angle for 125 is 2.18 and for 12 is 0.209.
To learn more about the sexagesimal system, refer to the link:
https://brainly.com/question/8163253
#SPJ1
Which of the following is NOT a line used on blueprints?
Answers
Answer: Photo lines
Explanation: made more sense
The two aircraft did not collide but missed each other by no more than a millimeter. Are you required to notify any government agency of this event? Explain.
Answers
what is engineering design process
Answers
Answer:
The engineering design process is a common series of steps that engineers use in creating functional products and processes
The received signal is the sum of the direct and ground-reflected signals and since they travel at different distances they have different time delays. If the transmitted signal is s(t) then the received signal is x t s t t s t t ( ) ( ) ( ) = − + − 1 2 The amount of delay (in seconds) can be computed for both propagation paths, using the fact that the time delay is the distance divided by the speed of light (3 10 × 8 m/sec). Determine t1 and t2 as a function of d1.
Answers
Answer:
duuuuuuuuuuuuuuuuuhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
Explanation:
duhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
Match the jobs descriptions with the job titles.
budget analyst
bill collector
claims adjuster
Locate people who owe money and negotiate payment plans.
Review a company's expenses to determine if they exceed the targets.
Contact doctors and employers to ensure that there is no insurance fraud.
Answers
Bill collector: locate people who owe money and negotiate payment plans
Claims adjuster: contact doctors and employers to ensure that there is no insurance fraud.
by what factor is the maximum shear stress greater than the average shear stress acting over the cross section?
Answers
The ratio of τmax and τavg is defined as the shear stress factor, and it has important implications in the design of materials and structures.
The shear stress factor can vary widely, depending on the material and the loading conditions, and it can be a critical factor in the failure of a material or structure. In general, the shear stress factor is higher for ductile materials than for brittle materials. This is because ductile materials can absorb more energy before they fail, which means that they can handle higher stresses without fracturing. Brittle materials, on the other hand, tend to fail suddenly and catastrophically when they reach their maximum stress, which means that they cannot handle high shear stresses for long.
In conclusion, the maximum shear stress is usually much greater than the average shear stress acting over the cross-section, and the ratio of the two is defined as the shear stress factor. The shear stress factor can vary widely depending on the material and the loading conditions, and it is an important factor to consider in the design of materials and structures. It can be a critical factor in the failure of a material or structure, and it is important to choose materials and designs that can handle high shear stresses without failing suddenly and catastrophically.
Learn more about brittle materials: https://brainly.com/question/13258328
#SPJ11
Determine (a) the principal stresses and (b) the maximum in-plane shear stress and average normal stress at the point. Specify the orientation of the element in each case. 60 45 30
Answers
Answer:
a) 53 MPa, 14.87 degree
b) 60.5 MPa
Average shear = -7.5 MPa
Explanation:
Given
A = 45
B = -60
C = 30
a) stress P1 = (A+B)/2 + Sqrt ({(A-B)/2}^2 + C)
Substituting the given values, we get -
P1 = (45-60)/2 + Sqrt ({(45-(-60))/2}^2 + 30)
P1 = 53 MPa
Likewise P2 = (A+B)/2 - Sqrt ({(A-B)/2}^2 + C)
Substituting the given values, we get -
P1 = (45-60)/2 - Sqrt ({(45-(-60))/2}^2 + 30)
P1 = -68 MPa
Tan 2a = C/{(A-B)/2}
Tan 2a = 30/(45+60)/2
a = 14.87 degree
Principal stress
p1 = (45+60)/2 + (45-60)/2 cos 2a + 30 sin2a = 53 MPa
b) Shear stress in plane
Sqrt ({(45-(-60))/2}^2 + 30) = 60.5 MPa
Average = (45-(-60))/2 = -7.5 MPa
you are the network administrator for a small consulting firm. the firm has recently rolled out a new intranet site, and you are responsible for configuring the dns.you are able to connect to the intranet site by using the ip address, but you cannot connect by using the hostname.which of the following do you need to configure to access the site with the hostname?
Answers
You need to configure a DNS A record for the intranet site's hostname to map it to the correct IP address.
What is DNS?
DNS, or Domain Name System, is an internet protocol used to translate domain names, such as www.example.com, into IP addresses, such as 192.168.2.1, that computers can understand and use to communicate with each other. DNS acts as a directory service, providing a link between domain names and their associated IP addresses, which are stored and managed in a distributed database system. DNS is essential for the functioning of the internet, allowing users to access websites and services without having to remember their numerical IP addresses. DNS works by querying a distributed network of DNS servers, which maintain a database of IP addresses and their corresponding domain names. When a DNS query is made, the DNS server looks up the requested IP address in its database and returns it to the user. DNS is an important part of the internet infrastructure and is used by many different types of services, such as email, web hosting, and streaming services.
To learn more about DNS
https://brainly.com/question/29602856
#SPJ1
Which activity is accomplished as part of the monitoring and controlling process? Completing the project documentation Completing the lessons learned review Assessing project quality Creating the network diagram
Answers
As part of the monitoring and controlling process in project management, one of the activities accomplished is assessing project quality.
This involves evaluating and measuring the project's deliverables and performance against predefined quality standards and criteria. It ensures that the project outputs meet the desired level of quality and helps identify any deviations or issues that may arise during project execution. This activity helps project managers take corrective actions and make necessary adjustments to maintain or improve project quality.
While completing project documentation, completing the lessons learned review, and creating the network diagram are important tasks in project management, they may be associated with other processes such as project closing, project review, or project planning, respectively, rather than being specifically part of the monitoring and controlling process.
Therefore, one of the activities accomplished is assessing project quality.
For more details regarding project management, visit:
https://brainly.com/question/31545760
#SPJ4
What is the impact of age on the tin in the fusible plug?
Answers
The impact of age on the tin in the fusible plug is that it can cause the tin to become brittle and lose its ability to function effectively.
Fusible plugs are safety devices installed in boilers to prevent excessive pressure buildup. They contain a core made of tin or an alloy with a low melting point. Over time, the tin can deteriorate due to aging and exposure to high temperatures. As the tin ages, it may lose its ability to melt and release pressure at the desired temperature.
This can compromise the safety of the boiler system, as the fusible plug may not function as intended during an overpressure event. Regular inspection and replacement of fusible plugs are necessary to ensure their reliability and effectiveness in maintaining boiler safety.
You can learn more about fusible plug at
https://brainly.com/question/31560038
#SPJ11
Leather palm gloves can protect your hands from what hazards
Answers
Answer:
They protect the entire hand from abrasion and punctures, and are a dependable, comfortable glove for a wide variety of jobs. Drivers' gloves are available in various types of leathers and can be unlined or lined for cold weather. Leather palm gloves provide maximum protection against abrasive and puncture hazards.
Gloves with leather palms offer the best defense against abrasive and puncture risks. They have leather palms and fingers and are constructed of dependable cotton or canvas.
What is abrasive?Abrasive is defined as a substance, sometimes a mineral, used to shape or polish a product by rubbing, which causes some of the workpiece to be removed due to friction. Abrasives are a particular kind of extremely hard material that are utilized in a variety of residential, industrial, and technological applications. A portion of the work piece is worn away when the abrasive is rubbed against it.
These leather gloves each offer particular levels of comfort, protection, and durability. Some of these leather gloves are suitable for use by those handling dangerous chemicals and sparks. Some can provide cut protection to an extreme degree. For workers who handle heat and water, certain types of leather gloves are recommended.
Thus, gloves with leather palms offer the best defense against abrasive and puncture risks. They have leather palms and fingers and are constructed of dependable cotton or canvas.
To learn more about abrasive, refer to the link below:
https://brainly.com/question/9624379
#SPJ5
What type of engineer makes sure equipment is safe and operational
Answers
Answer:
mechanical engineer is the best answer