Which statement best describes the difference between veins and arteries? *
veins carry oxygen rich blood back to the heart while arteries carry oxygen poor blood
away from the heart
veins carry oxygen poor blood back to the heart while arteries carry oxygen rich blood
away from the heart.
brings oxygen into the lungs and releases carbon dioxide and water (waste materials)
from the body
arteries carry blood that is carbon dioxide rich to the heart,

The given statement is false - outside city limits, the minimum distance for parking cars from a warning cross indicating a railroad crossing is 50 meters (165 feet).

Within 100 feet of a railroad crossing, bridge, tunnel, or other potentially dangerous location.

To ensure the safety of drivers on the road, the relevant authorities have made a number of rules regarding parking cars and other vehicles.

The authorities have made regulations regarding car parking close to railroad crossing signs in consideration of public safety and potential conditions relating to traffic accidents.

Because trains follow a different route and are a different mode of transportation, sometimes they must cross over the sides of the road.

The maximum length for parking a car outside the city limits has been set at 50 meters in order to prevent accidents that might happen as a result of track failure or other technical issues.

The same limit for parking a car inside the city's boundaries, however, has been set to at least 10 meters, or roughly 33 feet, due to space restrictions.

To know more about parking rules visit:

https://brainly.com/question/14393301

#SPJ4

The hazardous substance in automobile exhaust that is also present in high concentration in tobacco smoke is acrolein.

Substance that tobacco smoke and the exhaust of automobiles contains a has it is substance called acrolein in very very high concentration.

Inhaling acrolein can give rise to several breathing problems like shortness in breathing and also irritation in lungs.

Acrolein is formed when the fats are overheated apart from automobiles and tobacco a very low amount of acrolein is also found in over used cooking oil.

To reduce acrolein from the automobile exhaust lead based adsorption substances are preferred to be used in automobile exhaust.

To know more about acrolein, Visit,

https://brainly.com/question/6224949

#SPJ4

The release of neurotransmitters into the synapse is initiated by depolarization, which opens Ca2+ channels, allowing Ca2+ to move vesicles to the synaptic membrane.

This is the correct answer.When an action potential (AP) arrives at the axon terminal, it results in the opening of voltage-gated Ca2+ channels. The influx of Ca2+ into the nerve terminal causes the exocytosis of neurotransmitter-containing vesicles into the synaptic cleft. Calcium influx is thought to trigger neurotransmitter release via a mechanism that involves Ca2+ binding to the vesicle-associated protein synaptotagmin 1 (Syt1), which promotes the interaction of vesicles with the presynaptic membrane.The entry of Ca2+ through voltage-gated calcium channels is critical for neurotransmitter release, and its absence leads to severe neurological disorders such as ataxia and epilepsy. Calcium ion (Ca2+) is one of the most crucial signaling molecules in cells and is essential for many physiological functions, including neurotransmitter release. Calcium ions activate synaptic vesicle fusion and neurotransmitter release by binding to specific proteins in the active zone of the nerve terminal.

To know more about neurotransmitters visit:

https://brainly.com/question/28101943

#SPJ11

Answer:

Option A

Explanation:

The total heat absorbed during the chemical reaction is the total heat released by the surrounding.

Net change of heat is equal to zero

Hence, the energy liberated from the air or the walls of the containers would be equal to the energy absorbed by the chemical reactions is equal to 100 Kj

Thus, option A is correct

The atmospheric concentration of a gas depends on its emission into the atmosphere and its rates of physical, chemical and biological removal. The time to lower the concentration of the gas to 37% of its original amount is its atmospheric lifetime.

The measurements of CO2 equivalents in parts per million CO2 is termed as atmospheric concentration. The pressure exerted by the atmosphere on the gas is called atmospheric pressure.

The atmospheric lifetime of a species mainly measures the time which is require to restore equilibrium in the atmosphere that follows a sudden decrease or increase in the concentration of the species in the atmosphere.

Emission is something which can be released, emitted or discharge.

Types of emission

Thus, we concluded that the atmospheric concentration of a gas depends on its emission into the atmosphere and its rates of physical, chemical and biological removal. The time to lower the concentration of the gas to 37% of its original amount is its atmospheric lifetime.

learn more about atmospheric concentration:

https://brainly.com/question/16657469

#SPJ4

Answer:

b. The pressure will be cut in half.

Explanation:

As we can see in the Ideal Gases formula, the pressure and the number of moles are directly proportional:

if the temperature and volume remain constant, when extracting 4 moles, the amount of substance inside the container decreases, that is, there are fewer particles, therefore the pressure will be lower.

When the number of moles is cut in half (from 8 moles to 4 moles), the pressure will also be cut in half.

The chemical reaction co2 + h2o = hco3- + h+, an increase in co2 leads to an increase in hydrogen ion (H+) concentration.

The chemical reaction given is the formation of carbonic acid (H2CO3) from carbon dioxide (CO2) and water (H2O), followed by the dissociation of H2CO3 into bicarbonate (HCO3-) and hydrogen ion (H+). When CO2 is added to this reaction, the equilibrium shifts to the right, meaning more H2CO3 dissociates into HCO3- and H+. Therefore, the concentration of H+ increases, making the solution more acidic. This is an important process in the regulation of blood pH, as CO2 levels affect the pH of the blood.

For more questions like reaction visit the link below:

https://brainly.com/question/8699184

#SPJ11

1. Na cannot replace K

2. Co will replace Cu

3. Zn cannot replace itself

4. Ni  cannot replace Ba

The reactivity series is a table showing how reactive elements. The reactiveness could be in descending or ascending order.

Reactivity series exist for both cations and anions.

In this case, we are dealing with cations. The reactivity series for cations is in the attached image.

The following can be observed from the table:

As a rule of thumb, cations at the lower part of the table cannot displace cations at the upper part during reactions.

Thus:

More on the reactivity series can be found here: https://brainly.com/question/14652325

#SPJ1

Answer:

10.554 amu

Explanation:

X1 has 10 amu with 72.3%

X2 has 12 amu with 100 - 72.3 = 27.7%

So average mass = 10(72.3%) + 12(27.7%)

= 10(0.723) + 12(0.277)

= 7.23 + 3.324

= 10.554 amu

1) Gas P is hydrogen as hydrogen burns with a pop sound

2) OH -ve is the ion responsible for making Q alkaline

3)Since OH (-ve ) ion is responsible so it must be basic means Ph is more than 7 or can say between 7 and 14

4)Reaction of calcium with cold water:

Ca (s) + 2H2O (l) --> Ca(OH)2(aq.) + H2 (g)

So basically it is an experiment you also can perform when you hold a lighter near the bubble that formed during the reaction it will burn out with a pop sound.

To know more about calcium carbonate visit below

https://brainly.com/question/28206480

Answer:

2.22x10^24 atoms of iron

Explanation:

(3.5 moles Fe)*(6.02x10^23 atoms Fe/mole Fe) = 2.22x10^24 atoms of iron

Answer:

D = 2

2H₂0 → 2H₂ + O₂

Explanation:

I'll assume that "DH₂0-DH₂ + O₂" is meant to read:

   DH₂0 → DH₂ + O₂

Water decomposes into oxygen (O2) and hydrogen (H2) molecules.

We are to find a vale of D that will balance this equation.

        DH₂0 → DH₂ + O₂

Count the atoms on both sides of the equation, assuming D is 1 at this point:

 (D = 1)

 Element  Reactant  Product Balanced?

       H            2               2            Yes

       O            1                2            No

We need an additional oxygen atom on the reactant side, so lets try D=2:

2H₂0 → 2H₂ + O₂

 Element  Reactant  Product Balanced?

       H            4               4           Yes

       O            2               2           Yes

The equation is balanced for D = 2:

2H₂0 → 2H₂ + O₂

Answer:  The electron transition from 4p→2s  would produce light with a longer wavelength.

Explanation: The energy of an electron in a hydrogen atom is higher when it is at a higher energy level. When an electron undergoes transition it releases energy in the form of electromagnetic radiation or light. The higher the transition, the greater the energy.

Now we know that the energy released in the 4p→1s transition is greater than the energy released in the 4p→2s transition. And since energy is inversely proportional to wavelength, the wavelength of light in the latter case is more.

To learn more about relation between energy and wavelength:
https://brainly.com/question/21495715

Answer:

D. Electric and solar

Answer:

Gasoline and Electric

Explanation:

Quite simply, a hybrid combines at least one electric motor with a gasoline engine to move the car, and its system recaptures energy via regenerative braking. Sometimes the electric motor does all the work, sometimes it's the gas engine, and sometimes they work together.

Answer:

No, I believe it's not balanced, srry if I got it wrong for you

Out of the given choices, C2H4 is an organic compound because it is a hydrocarbon. An organic compound is a chemical compound that contains carbon atoms bonded to other atoms, usually hydrogen, oxygen, and nitrogen, but also sulfur, phosphorus, and other elements.

Organic compounds are the basis of all living organisms and include important molecules such as proteins, nucleic acids, carbohydrates, and lipids. In contrast, H2O2, NaOH, and H2SO4 are inorganic compounds since they do not contain carbon-hydrogen bonds. H2O2 is a peroxide, NaOH is a base, and H2SO4 is an acid. These are important inorganic compounds used in various industries, but they are not organic.

H2O2 is a clear, colorless, and odorless liquid that is commonly used as a disinfectant and bleaching agent. It is an inorganic compound that does not contain carbon-hydrogen bonds, so it is not an organic compound. On the other hand, C2H4 is an organic compound because it is a hydrocarbon with two carbon atoms and four hydrogen atoms. This compound is also known as ethylene and is used in the production of plastics, rubber, and other chemicals.

In conclusion, the organic compound out of the given options is C2H4 (ethylene), while the rest are inorganic compounds.

To know more about hydrocarbon visit :

brainly.com/question/32019496

#SPJ11

Answer:

I'm sorry but I need points

Answer:

yes

Explanation:

as the salt is a polar compound which means that its dissolvable in water

so the salt would be solute and the water is the solvent

The mass, in grams, of zinc electroplated out of a solution containing zinc ion if the solution is electrolyzed for 1 hour and 9 minutes at a current of 0.407 amps would be 0.571 grams.

According to Faraday's laws of electrolysis, the amount of substance produced at an electrode during electrolysis is directly proportional to the quantity of electricity that passes through the cell.

Q = It

1 hour 9 minutes = 60 minutes + 9 minutes = 69 minutes

69 minutes = 69 x 60 seconds = 4140 seconds

Thus:

Q = It = 0.407 A x 4140 s = 1685.88 C

The molar ratio between zinc and the number of electrons transferred during the electrolysis to determine the moles of zinc deposited:

2 mol e- → 1 mol Zn

The moles of zinc deposited can be calculated as:

moles Zn = Q / (2 x 96,485 C/mol e-) = 8.744 x 10^-3 mol

mass Zn = moles x molar mass

= 8.744 x 10^-3 x 65.38

= 0.571 g

In other words, approximately 0.571 grams of zinc would be electroplated out of the solution.

More on electrolysis can be found here: https://brainly.com/question/31726896

#SPJ1

Answer:

.5

Explanation:

Answer:

1.5

Explanation:

1.5

The joint recommendations of the expert group, including the Academy of Nutrition and Dietetics, suggest that resistance athletes like Porter should consume at least 1.2-1.7 grams of protein per kilogram of body weight daily.

The joint recommendations of the expert group, including the Academy of Nutrition and Dietetics, suggest that resistance athletes like Porter should consume at least 1.2-1.7 grams of protein per kilogram of body weight daily. Since Porter weighs 100 kg, he should consume between 120-170 grams of protein every day to support his training and recovery. It's important to note that protein is not the only nutrient necessary for optimal performance and health in athletes. Adequate carbohydrate and fat intake are also crucial for energy and overall nutrition. Resistance athletes should aim for a balanced diet that includes a variety of nutrient-dense foods to support their athletic endeavors. Consultation with a registered dietitian can also be helpful in designing a personalized nutrition plan to meet individual needs and goals.

To know more about protein visit: https://brainly.com/question/31017225

#SPJ11

Answer:

67.4 % of C₉H₈O₄

Explanation:

To make titrations problems we know, that in the endpoint:

mmoles of acid = mmoles of base

mmoles = M . volume so:

mmoles of acid = 20.52 mL . 0.1121 M

mmoles of acid = mg of acid / PM (mg /mmoles)

Let's determine the PM of aspirin:

12.017 g/m . 9 + 1.00078 g/m . 8 + 15.9994 g/m . 4 = 180.1568 mg/mmol

mass (mg) = (20.52 mL . 0.1121 M) . 180.1568 mg/mmol

mass (mg) = 414.4 mg

We convert the mass to g → 414.4 mg . 1g / 1000mg = 0.4144 g

We determine the % → (0.4144 g / 0.615 g) . 100 = 67.4 %

Explanation:

This is because the hydrogen bonding in water H2O is stronger than that is hydrogen sulfide H2S.

Yes, the carbon-oxygen double bond is more polar than the carbon-carbon double bond. Here are some details and explanations on why it is so A polar bond is a chemical bond where a pair of electrons is unequally shared between two atoms.

The unequal sharing of electrons results in the formation of two poles, a negative pole and a positive pole. The difference in the electronegativity of the bonded atoms determines the polarity of the bond. The greater the difference in electronegativity between the two bonded atoms, the more polar the bond is.What is the electronegativity of an atom?The electronegativity of an atom is its ability to attract a pair of electrons towards itself. The higher the electronegativity of an atom, the greater its ability to attract electrons.What is a double bond?A double bond is a type of chemical bond where two pairs of electrons are shared between two atoms.

The difference in electronegativity value has an implication on the polarity of the bond. The greater the difference in electronegativity, the more polar the bond is. In the case of carbon-oxygen double bond, the difference in electronegativity is 1.0, which means that the bond is more polar than the carbon-carbon double bond, which has a difference in electronegativity of 0. In summary, the carbon-oxygen double bond is more polar than the carbon-carbon double bond.

To know more about double bond visit:-

https://brainly.com/question/29068102

#SPJ11

Salt water contains dissolved ions, specifically sodium (Na+) and chloride (Cl-) ions. These ions increase the conductivity of the water, allowing for more efficient flow of electrons. When metal comes into contact with salt water, it acts as an electrolyte, accelerating the process of rusting. The metal loses electrons to the oxygen in the water, forming metal oxides (rust). The presence of the dissolved ions in salt water increases the rate of electron transfer, causing rust to form more quickly than in pure water where there are no ions to facilitate the reaction. Therefore, salt water facilitates rusting more than pure water due to the presence of dissolved ions that increase the rate of electron transfer.

Saltwater facilitates rusting more than pure water because it contains dissolved ionic compounds, such as sodium chloride (NaCl). These compounds dissociate into ions, increasing the electrical conductivity of the water.

This enhanced conductivity promotes the electrochemical process of rust formation, in which iron loses electrons and reacts with oxygen to form iron oxide (rust). The presence of ions in saltwater accelerates this process, leading to more rust formation compared to pure water.

To know more about Salt water visit:-

https://brainly.com/question/5306491

#SPJ11

The question is missing. Here is the complete question.

One light beam has wavelength, \(\lambda_{1}\), and frequency, f₁. Another light beam has wavelength, \(\lambda_{2}\), and frequency, f₂. Write a proportion that shows how the ratio of the wavelengths of these two light beams is related to the ratio of the frequencies.

Answer: \(\frac{f_{1}}{f_{2}} =\frac{\lambda_{2}}{\lambda_{1}}\)

Explanation: In vacuum, eletromagnetic waves travels at a constant speed called "speed of light", whose symbol is [c] and magnitude is 3x10⁸m/s.

Speed of light, frequency and wavelength are related by the formula:

\(c=\lambda.f\)

So, if one light beam has wavelength and frequency, \(\lambda_{1}\) and f₁, respectively, the second beam has wavelength \(\lambda_{2}\) and frequency f₂ and both travel at speed of light:

\(\lambda_{1}f_{1}=\lambda_{2}f_{2}\)

\(\frac{f_{1}}{f_{2}}=\frac{\lambda_{2}}{\lambda_{1}}\)

Then, the ratio that shows the relation between frequencies and wavelengths of these light beams is \(\frac{f_{1}}{f_{2}}=\frac{\lambda_{2}}{\lambda_{1}}\)

Answer: alpha radiation, uranium, radium, radon, polonium,

Explanation:

10 radioactive substances are: