The one that is not a part of a rack-and-pinion steering system are the pitman arm, idler arm, and center link. The correct option is d. all answers are correct.
What is a rack-and-pinion steering system?Rack and pinion steering employs a gear set to transform the steering wheel's circular motion into the linear motion required to turn the wheels. Tie rods, the shaft, and rack and pinion are the key components of a rack and pinion system.
When the steering wheel is rotated, the shaft transfers the steering wheel's action to the gear. This causes the gear to rotate, which causes the rack to move.
Therefore, the correct option is d. all answers are correct
To learn more about the steering system, refer to the link:
https://brainly.com/question/11210624
#SPJ1
use the emu8086 to write a program for pushing AX seven times at the stack, check the stack pointer. and [hint : initialize with 8086H] .
Answer:
I got the point
Explanation:
just chill out baby
___ are approved for repair on damaged corrugated sheath
When it comes to repairing damaged corrugated sheath, there are several approved methods depending on the extent of the damage. One common repair method involves using a specially designed corrugated sheath repair kit that includes a new section of corrugated sheath and the necessary tools and materials to splice it onto the existing sheath.
This kit typically includes a heat shrink sleeve that is used to secure the new section of sheath in place, as well as adhesive or sealant to ensure a watertight seal. Another approved repair method for damaged corrugated sheath involves using a mechanical repair coupling. This type of coupling is designed to join two sections of corrugated sheath together, creating a strong and durable repair. Mechanical repair couplings are typically made from stainless steel and can be easily installed using basic tools. Overall, it is important to follow manufacturer recommendations and industry standards when repairing damaged corrugated sheath to ensure that the repair is safe, effective, and meets all necessary requirements.
Learn more about manufacturer here-
https://brainly.com/question/30352969
#SPJ11
You are to design an amperometric sensor to measure oxygen from clinical blood specimens obtained during surgery.write up the electrochemical reaction that gives rise to current and explain in one sentence in simple physical terms why the sensor’s calibration will be linear?
The electrochemical reaction for an amperometric oxygen sensor is 4OH- + \(O_{2}\) + 2\(H_{2}\)O → 4\(H_{2}\)O + 4e-. The calibration of the sensor will be linear due to the direct relationship between the oxygen concentration and the current generated.
The amperometric sensor measures the oxygen concentration in a blood specimen based on the electrochemical reaction that occurs when oxygen reacts with water molecules and hydroxide ions. The reaction results in the transfer of electrons, generating a current that is proportional to the concentration of oxygen present. Since the reaction is a direct and linear relationship between the concentration of oxygen and the current generated, the sensor can be calibrated to provide an accurate and linear measurement of oxygen concentration in blood specimens.
This makes it a useful tool for monitoring the oxygen levels in patients during surgery or other clinical procedures where precise monitoring of oxygen levels is crucial.
You can learn more about electrochemical reaction at
https://brainly.com/question/31364918
#SPJ11
8. What are two ways SpaceX plans to change personal travel?
Answer:
as all the people should go near stratosphere
Prototypes do all of the following except
A)allow for experimentation with new ideas.
B) provide a way to test improvements and fix flaws.
C) create a physical model in the early design stages
D) remain unchanged throughout the design process
Prototypes don't do: (Option D) remain unchanged throughout the design process.
Prototypes are used to experiment with ideas, test improvements and fix flaws, and create physical models during the design process, but they can change throughout the design process.
Prototypes are used to experiment with ideas, test improvements and fix flaws, and create physical models during the design process. They are an important part of the design process, as they allow designers to identify problems, discover solutions to those problems, and make necessary changes during the development process. Prototypes are not static, and can change throughout the design process in order to more accurately reflect the final product. This allows designers to ensure that the final product meets their needs and the needs of their users.
Learn more about Prototypes: https://brainly.com/question/29450558
#SPJ4
Eight switches are connected to PORTB and eight LEDs are connected to PORTA. We would like to monitor the first two least significant bits of PORTB (use masking technique). Whenever both of these bits are set, switch all LEDs of Port A on for one second. Assume that the name of the delay subroutine is DELAY. You do not need to write the code for the delay procedure.
Answer:
In this example, the delay procedure is given below in the explanation section
Explanation:
Solution
The delay procedure is given below:
LDS # $4000 // load initial memory
LDAA #$FF
STAA DDRA
LDAA #$00 //load address
STAA DDRB
THERE LDAA PORT B
ANDA #%00000011// port A and port B
CMPA #%0000011
BNE THERE
LDAA #$FF
STAA PORT A
JSR DELAY
LDAA #$00
STAA PORT A
BACK BRA BACK
device that illuminates the front of a stage floor is called___
A device that illuminates the front of a stage floor is called a footlight.
Footlights are typically placed around the front of the stage floor and help to illuminate the performers. This allows the audience to see the performers’ movements and facial expressions. Footlights are usually composed of several different lamps and they can produce a variety of lighting effects, such as spotlighting or accenting. This helps to create the desired atmosphere and mood for the performance. Footlights can also be used to draw attention to specific areas or objects on the stage. The light that is created by footlights is usually quite soft, which helps to make the performers appear more visible and lifelike.
In addition to providing illumination for the performers, footlights are also important for safety. They make it easier for performers to see the stage and help them to avoid any potential obstacles. Additionally, it helps the audience to better see the stage, as well as any props or scenery that might be present. Footlights also provide more visibility for those who might be operating sound and lighting equipment, making the process much safer for everyone.
Footlights are an essential part of any theatrical performance, helping to provide the necessary lighting to create an inviting and enjoyable atmosphere for both the performers and the audience.
Know more about Light here :
https://brainly.com/question/19697218
#SPJ11
What unit of electricity is used as a signal for a computer?
Answer:
A power supply unit (PSU) converts mains AC to low-voltage regulated DC power for the internal components of a computer. Modern personal computers universally use switched-mode power supplies
Answer:
Volt is the SI (Standard International) unit of electrical potential of the..
Explanation:
Two identical bulbs are connected to a 12-volt battery in parallel. The voltage drop across the first bulb is 12 volts as measured with a voltmeter. What is the voltage drop across the other bulb?
Answer:
12 volts
Explanation:
The voltages across parallel-connected items are identical. (In fact, that's why you can measure the voltage by connecting the voltmeter in parallel with the circuit element.)
The voltage drop across each bulb is 12 volts.
A picture of a ______ is the label pictogram on a chemical that warns of a product's acute toxicity.
A) Flame over circleB) Gas cylinderC) Skull and crossbonesD) Bomb
Answer:
C) Skull and crossbones
Explanation:
Its on the OSHA website under HCS Pictograms and Hazards
Refer to the graphic. What type of cabling is shown? a. STP b. UTP c. Coax d. Fiber
STP cable employs four of wires, each of which is shielded with foil and then covered with a metal braid or foil overall.
What kind of cable is UTP?Unshielded twisted-pair cable is known as UTP. A 100 ohm cable called a UTP cable has 2 to 1800 coaxial cables pairs that are encased in an outer jacket. They don't have a metal shield. As a result, the wire has a small diameter yet is not shielded from electrical interference.
UTP or FTP, which is preferable?For instance, Unshielded twisted - pair (unshielded twisted pair cables can be a good choice if you intend to install Network cable in your home. But if you wish to use other Gigabit Ethernet and PoE (Power through Ethernet) applications.
To know more about UTP visit:
https://brainly.com/question/29755958
#SPJ4
Most ceilings are covered with plaster or…
Explanation:
Most ceilings are coverd with plaster or board.
true or false: in a single-stream, steady flow system, the mass flow rates for the inlet and outlet must be the same. true false question. true false
Answer:
True
Explanation:
in a single-stream, steady flow system, the mass flow rates for the inlet and outlet must be the same is true
A wastewater treatment plant discharges 2.0 m^3/s of effluent having an ultimate BOD of 40.0 mg/L into a stream flowing at 15.0 m^3/s. Just upstream from the discharge point, the stream has an ultimate BOD of 3.5 mg/L. The deoxygenation constant kd is estimated at 0.22/day.
a. Assuming complete and instantaneous mixing, find the ultimate BOD of the mixture of wastewater and river just downstream from the outfall.
b. Assuming a constant cross sectional area for the stream equal to 55 m^2 , what ultimate BOD would you expect to find at a point 10,000 m downstream?
Answer:
What grade is this is for??
When someone uses experience and/or information from others to determine the project duration and total cost, estimating is being used. A) top-down B) experiential C) bottom-up D) reference class E) professional estimation
Experiential estimating is being used to determine the project duration and total cost.
What is Experiential?
Experiential learning is an educational philosophy that focuses on learning through experience. It involves actively engaging in a hands-on, sensory-based activity that encourages and facilitates learning. This type of learning is often associated with the physical environment, where the learner interacts directly with the environment and the activity to gain knowledge. Experiential learning can also involve activities such as role-playing, simulations, and problem-solving. This approach to learning is based on the idea that learning is most effective when it is meaningful and relevant to the learner. It promotes active learning, reflection, and the development of critical thinking skills.
To know more about Experiential
https://brainly.com/question/29851763
#SPJ1
A student places a piece of a potato into a container of hydrogen peroxide. One observation the student makes is that bubbles form around the potato. The presence of bubbles might indicate the formation of a new substance because bubbles
a - Group of answer choices always rise to the top of a liquid.
b- are almost always perfectly spherical.
c- could show that a gas is forming.
d- usually burst after a few minutes.
Engineering ethics include ideas and directives related to: (a) Urban infrastructure (b) Contracts (c) Integrity (d) Corporate business practices
Note that Engineering ethics include ideas and directives related to: All the above, that is Option A-D.
What is Engineering Ethics?Engineering ethics are the norms and principles that engineers must follow as a moral commitment to their profession and the world. Engineering is a professional occupation that has a significant influence on people's lives.
Engineers have a professional obligation to design and maintain infrastructure in a way that is safe, effective, and sustainable. This includes ensuring that urban infrastructure, such as roads, bridges, and buildings, meets the needs of the community and does not pose a risk to public safety.
All engineers often work under contracts with clients, and they have a professional obligation to fulfill the terms of these contracts in a timely and competent manner.
They are expected to act with integrity in all aspects of their work, including honesty, fairness, and respect for others.
Engineers working for corporations or other organizations have a professional obligation to uphold ethical standards. Hence, all the above options are related to Engineering Ethics.
Learn more about Engineering Ethics:
https://brainly.com/question/14955664
#SPJ1
In a certain chemical plant, a closed tank contains ethyl alcohol to a depth of 71 ft. Air at a pressure of 17 psi fills the gap at the top of the tank. Determine the pressure at a closed valve attached to the tank 10 ft above its bottom.
Answer:
the pressure at a closed valve attached to the tank 10 ft above its bottom is 37.88 psi
Explanation:
Given that;
depth 1 = 71 ft
depth 2 = 10 ft
pressure p = 17 psi = 2448 lb/ft²
depth h = 71 ft - 10 ft = 61 ft
we know that;
p = P_air + yh
where y is the specific weight of ethyl alcohol ( 49.3 lb/ft³ )
so we substitute;
p = 2448 + ( 49.3 × 61 )
= 2448 + 3007.3
= 5455.3 lb/ft³
= 37.88 psi
Therefore, the pressure at a closed valve attached to the tank 10 ft above its bottom is 37.88 psi
Which gas is released in the SMAW process causing a
shielding affect on the molten weld pool?
•nitrogen
•carbon dioxide
•argon
•hydrogen
for a 64-kbyte, 2-way set associative cache, with 32-byte cache blocks, study the cache miss rate for the following loops, assuming:
A computer has a 256 KByte, 4-way set, write-back, associative data cache with a 32 byte block size. Examine the cache miss rate for the following loops for a 64-kbyte, 2-way set associative cache with 32-byte cache blocks.
What is 64-kbyte?
The block size of 8 words is used to create a 16 KB 4-way set-associative cache memory unit. Miss rate is plotted against cache size and associativity level; as block size is increased past 64 bytes, miss rate increases. However, we currently have a 4-way set associative cache of 128 KB. Since cache lines are 32 bytes and each route is 32 KB.
The second-level cache has a total capacity of 2MBytes and is divided into 32-Byte blocks. It is a two-way set associative, write-back, write-allocate cache. The miss-rate analysis.
To learn more about 256 KByte from given link
brainly.com/question/13266930
#SPJ4
Please help I need by today !!
What is the purpose of a portfolio?
Answer:
To document your work and projects.
Explanation:
I hope I got the right meaning. :)
A bent rod is supported by smooth journal bearings at A, B, and C. F=800 N. Assume the rod is properly aligned. Find: The reactions at all the supports. For point B
The reactions at support B is 800 N, while the reactions at supports A and C are both zero.
To find the reactions at support B, we need to consider the equilibrium of forces acting on the bent rod. Since the rod is properly aligned, we can assume that the forces are balanced.
Let's denote the reactions at supports A, B, and C as R_A, R_B, and R_C respectively.
Vertical equilibrium:
Since the rod is in equilibrium, the sum of vertical forces must be zero. Considering the forces acting on point B:
R_B - F = 0
R_B = F
Therefore, the reaction at support B is equal to the applied force F, which is 800 N.
Horizontal equilibrium:
Since the rod is properly aligned, there should be no horizontal forces acting on it. Hence, the horizontal reactions at supports A and C are zero:
R_A = 0
R_C = 0
Know more about vertical forces here:
https://brainly.com/question/2037071
#SPJ11
The chart describes four people’s credit histories.
Creditworthy Criteria
Name
Description of Credit History
Ellie
Has more debt than earnings
Collin
Pays only some of his bills every month
Jacob
Has made three late payments in the past year
Eesha
Pays more than the minimum payment each month
Which person is creditworthy?
Answer:
D). Eesha pays more than the minimum payment each month.
Explanation:
Eesha would be considered most creditworthy among the given persons as she not only pays on time but also repays more than the minimum amount assigned to pay each month. In order to test the creditworthiness of an individual, his ontime debt paying capability is tested at first followed by the past credit repayment history and the credit score. Except Eesha, all the given candidates have failed to make timely repayment of their debts and hence, they cannot be considered creditworthy.
A(n) _____ is done to test each individual component (often a program) to ensure that it is as defect-free as possible.
Answer:
Unit test
Explanation:
Defintion: A test of each individual component (often a program) to ensure that it is as defect-free as possible.
write a program that prompts the user to enter the month and year and displays the number of days in the example, if the user entered month 2 and year 2012, the program should display
To write a program that prompts the user to enter the month and year and displays the number of days,
Begin by prompting the user to enter the month and year . Read the values entered by the user. Determine if the year is a leap year or not. A leap year is divisible by 4 but not divisible by 100, unless it is also divisible by 400. This is important because February can have 28 or 29 days depending on whether it's a leap year or not. Based on the month entered by the user, calculate the number of days in that month. For example, January, March, May, July,
August, October, and December each have 31 days, while April, June, September, and November each have 30 days. If it's February, check if it's a leap year to determine if it has 28 or 29 days. Display the number of days in the entered month to the user. Here's an example of how the main answer could be implemented in Python:
```python
# Prompt the user to enter the month and year
month = int(input("Enter the month (1-12): "))
year = int(input("Enter the year: "))
To know more about programing visit:
https://brainly.com/question/34046672
#SPJ11
CompTIA Network Plus N10-008 Question:
How many hosts are on a /30 network?
a.) None, as there are only two addresses: Network ID and Broadcast ID.
b.) 2
c.) 4
d.) None of the Above
There are 2 hosts on a /30 network.
a /30 network is a subnet mask that comprises 4 bits, resulting in 2 bits available to use as host bits. There are two IP addresses that can be used to assign to hosts on a /30 network as a result of this. These two addresses are the host address and the broadcast address. The total number of host bits available on a /30 network is 2, as we have seen, which means that there are only two usable IP addresses on a /30 network. Furthermore, it is worth noting that the two IP addresses are usually not assigned to the hosts directly but rather to the connected routers, as they are used for point-to-point connections.
Learn more about network:
https://brainly.com/question/20535662
#SPJ11
A steam power plant is represented as a heat engine operating between two thermal reservoirs at 800 K and 300 K. The temperature of the steam in the boiler is 550 K and the temperature of the saturated water in the condenser is 330 K. The rates of heat transfer in the boiler and condenser are 4 MW and 2 MW, respectively. Please answer the following.
Required:
a. Represent the devices present in the heat engine and include their name along with the data given in the problem.
b. If this steam power plant were to operate as a reversible heat engine, with the boiler and condenser temperatures, what would be its thermal efficiency?
c. Use your result from part (b) to determine if the actual steam power plant can achieve such thermal efficiency. Justify your answer.
d. For the actual steam power plant is the Clausius inequality satisfied? Show you computation and discuss whether your result agrees or disagrees with your answer in part (c).
a pressure cooker is a pan that cooks food much faster than ordinary pans by maintaining a higher pressure and temperature during cooking. the pressure inside the pan is controlled by a pressure regulator (the petcock) which keeps the pressure at a constant level by periodically allowing some steam to escape, thus preventing any excess pressure buildup. a certain pressure cooker has a volume of 6 l and an operating pressure of 75 kpa gage. initially, it contains 1 kg of water. heat is supplied to the pressure cooker at a rate of 500 w for 30 min after the operating pressure is reached. assuming an atmospheric pressure of 100 kpa, determine: a) the temperature at which cooking takes place. b) the amount of water left in the pressure cooker at the end of the process. assume some liquid water is still in the pan.
More cooking is done before the water actually begins to boil thanks to the raised pressure inside the cooker, which raises the boiling point of water above 1000C. In the end, food cooks more quickly.
Slow-cooked meals can be quickly prepared with pressure cookers. They are efficient in terms of electricity consumption and are excellent for tenderizing less expensive portions of meat. They are a healthy cooking method since they effectively retain nutrients and can cut cooking times by up to 50%. Water boils at 121°C (250°F) at that pressure. As a result, food may cook at considerably greater temperatures than it could under atmospheric pressure. Additionally, because cooking reactions quicken at higher temperatures, food cooks more quickly it is a good technology.
Learn more about consumption here-
https://brainly.com/question/13439091
#SPJ4
What signal propagation phenomena causes the diffusion, or the reflection in multiple different directions, of a signal?
In the radio communication system, multipath is the propagation phenomenon that causes diffusion or reflection in multiple different directions of a signal.
Multipath is a propagation mechanism that impacts the propagation of signals in radio communication. Multipath results in the transmission of data to the receiving antenna by two or more paths. Diffusion and reflection are the causes that create multiple paths for the signal to be delivered.
Diffraction occurs when a signal bends around sharp corners; while reflection occurs when a signal impinges on a smooth object. When a signal is received through more than one path because of the diffraction or reflection, it creates phase shifting and interference of the signal.
You can learn more about signal propagation at
https://brainly.com/question/14452898
#SPJ4
A horizontal poly crystalline solar panel module has to be investigated by natural cooling. For crystal silicon, the thermal coefficient approximately 0.0045/K is used. Investigate the effect of air velocity on the cooling performance of PV panels at 0-5 m/s air velocities, 25-40 ºC ambient temperatures, and 400-1000 W/ m2 solar radiation
Solution :
It is given that :
Thermal coefficient = 0.0045/K
Ambient temperature, \($T_a = 25 - 40^\circ$\)
air velocity, v = 0-5 m/s
Solar radiation, \($G= 400-100 \ W/m^2$\)
\($P=50 \ W$\)
Model calculations :
Cell temperature (\($T_c$\))
\($T_c = T_a + \left(\frac{0.25}{5.7+3.8 \ v_w}\right) G$\)
where \($ v_w - v_a = $\) wind speed / air speed
∴ \($T_c = 2 \pi + \left(\frac{0.25}{5.7+3.8 \times 1}\right) \times 400$\)
\($T_c = 35.526 ^\circ$\)
\($\Delta T = T_c -25$\)
= 35.526 - 25
= 10.526 K
Thermal coefficient = 0.0045 x 10.526
= 0.04737
Pv power = \($(1 -C_T) \times P \times \frac{G}{1000}$\)
\($=(1 -0.04737) \times 50 \times \frac{400}{1000}$\)
= 17.0526 W