Which of the following factors does not promote safety in the shop?
Staying healthy in mind and body.
Becoming well trained in the required job or task.
Having a good attitude toward safety and safety rules.
Thinking about pleasant things to pass the time.
Answers
Related Questions
Which option identifies the goal in the user story in the following scenario?
As a first-time user, I want to purchase organic jams as gifts to send to friends.
a first-time user
to purchase organic jams
to send to friends
as gifts
Answers
Answer: to purchase organic jams
Explanation:
I think it is
Name three types of large motor vehicles with which you might share the roadway. Explain how you can reduce risk when interacting with these vehicles.
Answers
Answer:
rucks, buses, RVs, trolleys
Explanation:
What are some different types of vehicles that we share the road with?
Driving is a complex task, and for safe driving you need to know not just the rules of sharing the road with other cars, but with variety of other types of vehicles: trucks, buses, RVs, trolleys, motorcycles, bicycles and of course pedestrians.
Jumper wires used to move a power glass when the battery is disconnected must have
alligator clip ends.
an inline fuse.
color coded wires.
straight probe ends.
Answers
Answer:
an inline fuse.
Explanation:
A jumper wire can be defined as a thin electrical wire that has a connector or pin at both ends, thus, making it possible to use for interconnecting the components of a test circuit, breadboard or any other prototyping tool (electronic circuit).
Also, power glass are designed to be used in automobile vehicles so as to enable the lowering or raising of the windows (glass) through the press of an electronic switch or button rather than the use of a winding handle.
Jumper wires used to move a power glass when the battery is disconnected must have an inline fuse, so as to offer the electronic component (power glass) sufficient protection against excessive current or voltage level that is capable of destroying it.
what is the scale if a 4-inch length on a drawing corresponds to a 4-foot length on the actual object?
Answers
If a 4-inch length on a drawing corresponds to a 4-foot length on the actual object, the scale factor is equal to 1 : 12.
What is a conversion factor?A conversion factor can be defined as a number that is typically used to convert (change) a number in one (1) set of units to another, either by dividing or multiplying.
Generally, an appropriate conversion factor to an equal value must be used when it is necessary to perform any mathematical conversion.
Conversion:
12 inches = 1 foot
X inches = 4 feet.
Cross-multiplying, we have:
X = 12 × 4
X = 48 inches.
For the scale factor, we have:
Scale factor = 4 : 48
Scale factor = 1 : 12.
Read more on scale factor here: brainly.com/question/2826496
#SPJ1
Which of the following requirement statements is an example of a breakdown of the accuracy standard?
The automobile rental prices shall show all taxes (including a 6% state tax).
The list of available flights shall include all flight numbers and departure times.
All information regarding incoming flights shall be stored in a text file.
The system shall have a natural language that interprets all English commands.
Answers
Answer:
The automobile rental prices shall show all taxes (including a 6% state tax).
Explanation:
Im pretty sure
A water turbine is to be designed to produce 27MW when running at 93.7 rev/min
under a head of 16.5m. A model turbine with an output of 37.5kW is tested under
dynamically similar conditions with a head of 4.9m . Calculate the:
a. model speed; b. scale ratio; c. assuming a model efficiency of 88%, estimate the volume
flow rate through the model; and d. if it is estimated that the force on the thrust bearing of
the full-size machine is 7.0GN , determine the bearing thrust of the model.
Answers
The Answers for the given question are as follow:
a. The model speed is approximately 31.62 rev/min.
b. The scale ratio is approximately 0.0417.
c. The estimated volume flow rate through the model is approximately 943.44 m^3/s.
d. The bearing thrust of the model is approximately 9.72 kN.
To calculate the required values for the water turbine model, we can utilize the concept of dynamic similarity.
a. To find the model speed, we can use the principle of geometric similarity, which states that the ratio of speeds is equal to the ratio of the square roots of the head. Thus:
Model speed = (√(Model head))/(√(Full-size head)) * Full-size speed
= (√4.9/√16.5) * 93.7 rev/min
= 31.62 rev/min
b. The scale ratio can be determined using the equation:
Scale ratio = (√(Model power))/(√(Full-size power))
= (√37.5kW)/(√27MW)
≈ 0.0417
c. To estimate the volume flow rate through the model, we can use the power equation:
Model power = (Model efficiency) * (Volume flow rate) * (Model head) * (Gravity)
37.5kW = 0.88 * (Volume flow rate) * 4.9m * (9.81m/s^2)
Solving for the volume flow rate:
Volume flow rate = 37.5kW / (0.88 * 4.9m * 9.81m/s^2)
≈ 943.44 m^3/s
d. To calculate the bearing thrust of the model, we can use the principle of force similarity:
Bearing thrust model = (Model power / Full-size power) * Full-size bearing thrust
= (37.5kW / 27MW) * 7.0GN
≈ 9.72kN
For more questions on force, click on:
https://brainly.com/question/12785175
#SPJ8
In your memo to your boss, explain your position and recommendation regarding your firm's future in designing high-end alternative housing solutions and the types of materials that would be used if this initiative were to move forward. Use the following as a guide for your response:
what cutting-edge alternative housing is desired and could be supported by your firm
how your firm could start creating designs and the types of recycled and reused materials needed in these builds
the challenges and/or benefits
your recommendation regarding how to move forward
Submit your work.
Answers
Answer:
Dear [Boss],
I am writing to recommend that our firm pursue a future in designing high-end alternative housing solutions. There is a growing demand for cutting-edge, sustainable housing options, and I believe our firm is well-positioned to meet this demand.
One area of opportunity is the use of recycled and reused materials in these builds. By incorporating materials such as reclaimed wood, recycled steel, and repurposed bricks, we can not only reduce our environmental impact, but also differentiate ourselves from other housing developers.
There are, of course, challenges to using these types of materials. They may require more time and effort to source, and there may be additional costs associated with their use. However, I believe the benefits of using recycled and reused materials far outweigh these challenges. Not only do they reduce waste and decrease our carbon footprint, they also have the potential to add unique character and value to our projects.
In terms of how to move forward, I recommend that we begin by researching and identifying specific recycled and reused materials that align with our design aesthetic and can be incorporated into our projects. We can also consider partnering with organizations or suppliers that specialize in these types of materials.
Overall, I believe that designing high-end alternative housing solutions using recycled and reused materials is a viable and exciting opportunity for our firm. By embracing this trend, we can not only meet the needs of an increasingly environmentally-conscious market, but also differentiate ourselves in a crowded industry.
Sincerely,
[Your Name]
Explanation:
A projectle is fived from the ground level with the velocity of 150 misec at 30° to the horizontal find its horizontal range and maximum height*A Projectle Ps fived from the ground level with the velocity of 150 misec at 30° to the horizontal Pind its horizontal range and maximum height
Answers
The equations of motion can be used to calculate the horizontal and maximum height of a projectile, with the horizontal range being 1003.7 meters and the maximum height being 285.2 meters.
Find its horizontal range and maximum height.To solve this problem, we can use the equations of motion to find the horizontal range and maximum height of the projectile. We'll start by breaking the initial velocity of the projectile into its horizontal and vertical components:
Initial velocity, v = 150 m/s
Launch angle, θ = 30°
Horizontal component, vx = v cosθ = 150 cos30° ≈ 129.9 m/s
Vertical component, vy = v sinθ = 150 sin30° ≈ 75 m/s
Maximum height:
The formula for the maximum height (hmax) reached by a projectile is given by:
hmax = (v\(y^2\))/(2g)
where g is the acceleration due to gravity, which is approximately 9.81 m/\(s^2\).
Substituting the values we have:
hmax = (\(75^2\))/(2×9.81) ≈ 285.2 meters
Therefore, the maximum height reached by the projectile is approximately 285.2 meters.
Horizontal range:
The formula for the horizontal range (R) of a projectile is given by:
R = (vx×vy)/g
where g is the acceleration due to gravity.
Substituting the values we have:
R = (129.9×75)/9.81 ≈ 1003.7 meters
Therefore, the horizontal range of the projectile is approximately 1003.7 meters.
So, the projectile will travel a horizontal distance of approximately 1003.7 meters and reach a maximum height of approximately 285.2 meters.
To know more about projectile, visit
brainly.com/question/31126282
#SPJ9
When chemicals are not being used, they should be stored in a _________ area.
Answers
\(▪▪▪▪▪▪▪▪▪▪▪▪▪ {\huge\mathfrak{Answer}}▪▪▪▪▪▪▪▪▪▪▪▪▪▪\)
Here's the required statement ~
When chemicals are not being used, they should be stored in a designated secured area.
When chemicals are not being used, they should be stored in a safe and designated area.
Why should chemicals be stored this way?This ensures proper containment and minimizes the risk of accidental exposure or reactions.
Segregating chemicals based on their compatibility and potential hazards is essential to prevent cross-contamination and potential chemical incidents.
A well-organized and labeled storage area also facilitates easy access and management, promoting overall safety within the environment where chemicals are stored.
Learn more about chemicals at:
https://brainly.com/question/29886197
#SPJ3
I want descriptions on
Current State of Programming in Pakistan
Scope of Programming in Pakistan
Answers
The scope of BS computer science in Pakistan is quite vast
try this :)
QUICK ASAP!!!
Which option predicts the most likely outcome in the following scenario?
Paul is working with a client to create an indoor pool in a mall. The client’s main concern is cost. Their plans include a chlorine-based filter, though Paul would like to use a different filter that is more eco-friendly.
A. Paul will need to conduct a complete life cycle analysis.
B. Paul will need to persuade his client of the benefits of the different filter.
C. Paul will need to conduct an in-depth cost analysis.
D. Paul will need to research government regulations on different types of filters.
Answers
Answer:
Im pretty sure the answer is B
Explanation:
Paul will need to persuade his client of the benefits of the different filter.
PLEASE ANSWER THIS ASAP!
Which construction material can workers erect at the fastest rate?
____ is the fastest construction material to erect.
Answers
Answer:
Onsite construction can certainly begin more quickly when you are using concrete, stone, or brick. However, total construction time will lag behind that of building with steel. These materials require time to prepare and cure; and they result in more waste to move off site and dispose of.
Answer:
I think it is sand but I'm not sure .
The typical procedure to remove any existing oxygen from a air-filled tire before filling nitrogen into it is to ?
Answers
The typical procedure to remove any existing oxygen from a air-filled tire before filling nitrogen into it is; as detailed in the steps below
How to remove existing oxygen from a tire?
The typical procedure is done by using the same principle utilized in filling tractor tires with water. The procedure is as follows;
The water line is attached to the tube valve and it has a small outline line beside the water line as water is pushed in, it will displace the air in the tube out of the hole.The amount of water you want inside the tube will let you know the point you will turn the the wheel to in such a way that when the quantity of water is reached, water will come out of the hole where the air was coming out from.Now when the amount of nitrogen is reached the outlet gets very cold which tells us nitrogen gas is coming out.Finally, you changeover the fitting and pump in nitrogen gas to achieve the desired pressure.Read more on removal of air at; https://brainly.com/question/14154063
Which of the following new features is an adaptive reuse structure most likely to need?
O transportation connectivity
O sewer hookup
Oshell ad core
fit out
Answers
Repurposing structures that have served their intended purpose no longer is considered adaptive reuse. Its main objectives are to transform urban blight and preserve architectural and cultural heritage.
An illustration of adaptive reuseAdaptive reuse involves using an existing structure for a function other than what it was designed for. As examples, consider converting an old movie theater into a recreation area, a big-box retailer into a call center, or even old railroad tracks into a park and walking path.
What value can adaptive reuse provide?Adaptive reuse initiatives are less disruptive to schedules, involve less mobilization, and take less time to complete. These assignments can frequently be finished over the course of a single semester, or even during the summer or winter breaks. This rapid building period reduces the loss of useful area.
to know more about adaptive reuse here:
brainly.com/question/28444986
#SPJ1
How could carbon monoxide gas enter your vehicle compartment?
leaks in the exhaust system
windy conditions
excessive speed
bad weather
Answers
explanation: it probably went from the bottom of your car and went through some leaked pipes and went to the Vehicle compartment.
Timescale limits knowledge for scientists because it is difficult for them to see much beyond their lifetimes. Question 1 options: True False
Answers
Answer:
I think true
Explanation:
Well I mean...we cant see the future. Certain things will be achieveable in different ganerations like going on mars
which type of irrigation fluid is typically used for endoscopic procedures using monopolar electrosurgery
Answers
An irrigation fluid that is used for endoscopic procedures using monopolar electrosurgery is Glycine 1.5% solution.
What is an irrigation fluid?This is a fluid that is used for dilation during the process of endoscopic surgery.
What the fluid does is that it helps to wash away dirt from the operating area after it has dilated the area.
Read more on irrigation fluid here: https://brainly.com/question/13246758
You are driving on a two-way street, and are looking for a place to park;
Answers
Answer:
you cannot park
Explanation:
except you park in a compound because it is a two way road parking on either side could lead to accident or goslow
Which statement most accurately evaluates the response to the prompt? Which statement most accurately evaluates the response to the prompt?
Answers
The statement that most accurately evaluates the response to the prompt is "The response fulfills the purpose but is inappropriate for the audience." (Option C)
How is this so?It is accurate and well aligned to indicate that one is grateful to their teachers. An accurate follow up to that statement should have been an explanation how, citing examples to buttress the initial statement.
Another body of text that could have helped is to mentioned names of specific teachers that have helped.
By deviating from the original thought , the response ceased to be appropriate for the intended audience as the second statement was a bit undiplomatic.
Learn more about prompt at:
https://brainly.com/question/30429408
#SPJ1
Full Question:
Although part of your question is missing, you might be referring to this full question:
Which statement most accurately evaluates the response to the prompt?
A. The response fulfills the purpose and is appropriate for the
audience.
B. The response does not fulfill the purpose but is appropriate for the
audience.
C. The response fulfills the purpose but is inappropriate for the
audience.
O D. The response does not fulfill the purpose and is inappropriate for
the audience.
what does secure mean iready
Answers
A student who received a score of 3.00 or higher met or exceeded the benchmark for a student who is on track to pass.This score is based on the anticipation at the moment the exam was administered rather than the anticipation for the end of the year.
what does secure mean iready ?If a student receives a red rushing flag, it means that his or her score is probably below what is actually possible.A student must have completed the reading assessment in less than 11 seconds on average for them to obtain a red rushing flag. The student should retake the diagnostic, per the i-Ready advice. The i-Ready system poses no threat.This assessment platform is used by more than 23,000 schools, serving more than 10 million students, to conduct secure and trustworthy learning assessments.According to studies, pupils in Grades K–8 who utilize i-Ready make more advancements in math and reading than those who do not. A mid-on-grade level scale score of 498 is considered proficient for the fifth grade.A vertical scale is used to report the results of the i-Ready Diagnostic, allowing comparisons of growth within and across years.Every time they take the Diagnostic test, students are given a scale score. A student who received a score of 3.00 or higher met or exceeded the benchmark for a student who is on track to pass.This score is based on the anticipation at the moment the exam was administered rather than the anticipation for the end of the year.To learn more about i-Ready system refer
https://brainly.com/question/23868760
#SPJ1
Urgent please help!
What are non-ferrous metal and ferrous metal?
Answers
Answer:
Ferrous metals are metals that contain iron and steel. Non-ferrous metals are those metals that do not have iron or iron components
Explanation:
hope this helps
define horizontal shapes
Answers
Horizontal shapes are simply defined as shapes that identified by their alignment and orientation along the horizontal axis.
What are horizontal shapes?Horizontal shapes are simply identified by their alignment and orientation along the horizontal axis.
These shapes appear to be extended in a left-to-right or right-to-left direction, with a greater width-to-height ratio. Rectangles, squares, lines, and strips are typical examples.
While lines are one-dimensional, horizontal objects with an unlimited length, rectangles and squares have four sides and have horizontal top and bottom boundaries. Strips are lengthy, varying-width horizontal shapes that are frequently utilized in design and the arts.
Horizontal shapes can imply security, harmony, calmness, and a sense of rootedness.
Learn more about shapes at: https://brainly.com/question/25965491
#SPJ1
2. Installing a
at the inlet and outlet of a pool's filter housing provides a means of
determining when the filter needs to be serviced.
A. strainer
B. hydro jet
C. pressure gauge
D. vacuum gauge
Answers
The answer is C. pressure gauge.
Which symbol in the figure is used to represent a thermostat contact for a heating system
Answers
Answer:
:)
Explanation:
its picture a
Using the 'and" symbols, how would you write out the measurement of 3
feet 8 inches?
Answers
Answer:
3' 8"?
Explanation:
What advice would you give to the company that wants to build a skyscraper in California? Make sure to include whether there is anything the company should change about its design and materials. Give specific examples. Your answer should include at least five complete sentences.
Answers
In order to begin building construction, it is essential to adhere to all California's edicts and regulations, as this state requires strict compliance with seismic laws and environmental concerns for constructing high-rises.
What will be the advice?It is imperative that you acquire the valid documentation and permissions given by pertinent authorities.
Moreover, it is sensible to reflect upon the regional meteorological patterns and geological conditions. Since California is renowned for robust earthquakes and devastating fires, the edifice must be engineered to endure these potential disasters. .
Learn more about company on
https://brainly.com/question/24553900
#SPJ1
A website allows doctors to share ideas on how to treat a particular kind of rare cancer.
As the number of doctors using the website increases, all the doctors benefit from the greater pool of knowledge.
This is an example of Select 2 options.
augmented reality
the network effect
a collaboration tool
cloud computing
virtual reality
Answers
Answer:
The Network Effect and A Collaboration Tool
Answer:
The Network effect and a collaborative tool
Explanation:
Just did the assignment on Edge
The Engineering Design Process is used to:
Answers
Answer:
to find a solution to a problem.
Explanation:
The engineering design process, by definition, is a series of steps that engineers use to find a solution to a problem. These steps include: defining the problem, brainstorming solutions, designing and building a prototype of the solution, testing the solution, and improving it.
How are the suspension systems related to the steering system?
Answers
Answer:
Rack and Pinion Steering Rack and pinion steering transmits circular motion from the steering wheel to a pinion that meshes with teeth on a flat rack. ... Suspension Systems The suspension system supports the vehicle, allowing the wheels to move up and down over irregularities in the road.
Yes
Step by step explication:
what unit do we use to measure how much current is flowing through a circuit?
Answers
Answer:
An ampere (AM-pir), or amp
Explanation:
Answer:
An ampere (AM-pir), or amp this is what my teacher tought me...