When performing this experiment, a student discovered that the weighed metal sample was too wide to fit into the graduated cylinder. The student pounded the corners of the sample until it fit into the cylinder. Would this procedural change affect the density calculation?

Answer:

false!!

your welcome!!!!

The wavelength of the earthquake that shook you with a frequency of 10 Hz and reached a city 84 km away in 12 s is approximately 500 meters.

To determine the wavelength of an earthquake that shakes you with a frequency of 10 Hz and reaches a city 84 km away in 12 s, we can use the equation:

wavelength = speed / frequency

The speed of an earthquake wave depends on the medium it travels through. In this case, we will assume that the wave is traveling through the Earth's crust, where the average speed of seismic waves is about 5 km/s.

First, we need to calculate the time it took for the earthquake wave to travel 84 km:

distance = speed x time

84 km = 5 km/s x time

time = 16.8 s

Now we can use the formula to find the wavelength:

wavelength = speed / frequency

wavelength = 5 km/s / 10 Hz

wavelength = 0.5 km or 500 m

Therefore, the wavelength of the earthquake that shook you with a frequency of 10 Hz and reached a city 84 km away in 12 s is approximately 500 meters.

Learn more about wavelength here:

https://brainly.com/question/31143857

#SPJ11

Answer:

When a substance burns, it produces new substances during a chemical change. Therefore, whether or not a substance is flammable is a chemical property. Knowing which substances are flammable helps you to use them safely. Another chemical property is how compounds react to light

Answer:

Below

Explanation:

Enrich the fuel/air mixture     would be first thing to do.

According to the given statement Mrs. Brown's electricity bill for the current month is $5000.00.

To calculate Mrs. Brown's electricity bill for the current month, we need to determine the total number of kilowatt-hours (kWh) she has consumed and apply the corresponding rates.

1. Calculate the electricity usage:

  Current meter reading - Previous meter reading
  20,300 kWh - 17,800 kWh = 2,500 kWh

2. Determine the cost for the first 2000 kWh:

  $1.00/kWh * 2000 kWh = $2000.00

3. Determine the cost for the remaining kWh:

  500 kWh * $3.50/kWh = $1750.00

4. Add the fuel adjustment charge:

  $0.50/kWh * 2500 kWh = $1250.00

5. Calculate the total bill:

  $2000.00 + $1750.00 + $1250.00 = $5000.00


To calculate the electricity bill, we first find the difference between the current and previous meter readings.

In this case, Mrs. Brown used 2,500 kWh.

For the first 2000 kWh, the cost is $1.00 per kWh, resulting in a charge of $2000.00.

For the remaining 500 kWh, the cost is $3.50 per kWh, totaling $1750.00.

Additionally, a fuel adjustment charge of $0.50 per kWh is added to the bill. This amounts to $1250.00.

Finally, we add up all the charges to get the total bill, which is $5000.00.

To know more about electricity visit;

https://brainly.com/question/12791045

#SPJ11

La fórmula: P = W/t  ó  W = P x t. donde:

P = potencia

W = trabajo

t = tiempo

Otra fórmula de potencia es: P= I x V

Proceso de carga de un capacitor - condensador

Una fórmula muy importante que también hay que tener en cuenta es: V = q/C que indica que el voltaje es proporcional a la carga que hay en un condensador.

De la fórmula de potencia P= I x V y considerando que la corriente es constante (corriente continua), entonces la potencia es proporcional al voltaje.  Si el voltaje aumenta en forma lineal, la potencia aumentará igual. Ver el siguiente diagrama.

Como la potencia varía en función del tiempo, no se puede aplicar la fórmula W = P x t, para calcular la energía transferida. Pero observando el gráfico, se ve que esta energía se puede determinar midiendo el área bajo la curva de la figura.

Energía Almacenada en un Condensador - Capacitor

El área bajo la curva es igual a la mitad de la potencia en el momento “t”, multiplicada por “t”.

Entonces: W = (P x t) / 2. Pero se sabe que P = V x I. Si se reemplaza esta última fórmula en la anterior se obtiene: W = (V x I x t) / 2, y como I x t = CV = Q, entonces para saber cuanta energía (W) hay en un condensador usamos una de las siguientes fórmulas:

W = (CV2/2) julios

W = (QV/2) julios

W  = (Q2/2C) julios

, donde:

W = Trabajo (Energía) en julios

C = Capacidad en faradios

V = voltaje en voltios en los extremos del condensador

Q = carga del condensador

Answer with the given explanations below: First the given formula that looks like this is: or where:

P = power

W = work

t = time

Next with another given power formula that looks like this is:

This is the charging process of a capacitor - capacitor #1.

Then it's a very important given formula that it must also be taken into account is: which it was indicated that the voltage is proportional to the charge on a capacitor.

In the following below, from the given power formula that looks like this is: and we are considering that the current is the constant (direct current), and then the power is proportional to the voltage. If the voltage increases linearly, the power will increase the same. See the following diagram. (I'm sorry, Yhungbabe, I don't have the diagram to show you in order to refer to the total energy stored in the capacitor because I havenèt learned the energy stored in the capacitor)

Anyway, since the power varies as a function of the time, the given formula that looks like this is: cannot be applied to calculate the energy transferred. But looking at the graph, it seems that this energy can also be determined by measuring the area under the curve of the figure.

This is The Energy Stored in a Capacitor - Capacitor #2.

The area under the curve is equal to the half of the power at time "t", being multiplied by "t".

Then with the given formula below that looks like this is:

But it's known that If this is the last given formula is being replaced in the previous one, we obtain the new given formula that looks like this is: and as another new given formula that looks like this is: there's so to find out how much energy (W) that there's in a capacitor that we use in one of the new given formulas that looks like in the listed below are:

joules

joules

joules  

Now finally where:

W = Work (In The Energy) in Joules

C = Capacity in the farads

V = voltage in the volts at the ends of the capacitor

Q = a capacitor charge

I apologize for the late answer and the replies, so anyway, I use the online language translator in order to translate Spanish to English for you in order to understand my work given below, so, I hope my answer with the given explanation below here is very helpful to your own question about how to calculate the total energy stored in the capacitor with the image has been provided, please mark me as Brainliest and have a great rest of the day! :D

Sincerely,

Jason Ta,

The Ambitious of The Brainly And The Role of The TDSB And WHCI Student of The High School.

Answer:

(D)

Explanation:

A(2,3,4,6,8)

B(6,9,12,15,18)

(AuB)=(2,3,4,6,8,9,12,15,18)

Answer:

Explanation:

Samantha walks along a horizontal path in the direction shown the curved path is a semi circle with a radius of 2 m while the horizontal part is for me what is the magnitude of displacement

Displacement is given by the straight line distance between P and Q. Displacement will be length of straight line joining P and Q

a semi circle with a radius of 2 m

Length of this straight line=4+diameter

=4+(2*2)

=8 m

Answer:

Unlike a fact witness, an expert is entitled to compensation for participation in the case. A key distinction between a fact witness and an expert witness is that an expert witness may provide an opinion. Fact witnesses must limit their testimony to facts in regard to evidence they may have observed or been involved.

Explanation:

there

Answer:

Unlike a fact witness, an expert is entitled to compensation for participation in the case. A key distinction between a fact witness and an expert witness is that an expert witness may provide an opinion. Fact witnesses must limit their testimony to facts in regard to evidence they may have observed or been involved.

Explanation:

E2020

Answer:

Its B- overconfidence

Explanation:

The tendency to have more confidence in judgment and decisions than one should is called Overconfidence

Overconfidence  is a bias in which a person's subjective confidence is his or her judgement is reliably greater then the objective accuracy of those judgments when confidence is relatively high

Hence, The tendency to have more confidence in judgment and decisions than one should is called Overconfidence

correct answer : option B)Overconfidence

Learn more about  Overconfidence :

https://brainly.com/question/8748056?referrer=searchResults

#SPJ2

Answer:

\(\huge\fbox\color{gold}{What's the question ??}\)

The number of photons produced in each pulse is 1.2×10^18 and the power delivered by Ruby laser per pulse is 3.76×10^8.

a)We know energy of each photon is given as e=hc/wavelength

We have wavelength =633nm=633×10^(-9) m

Hence energy of photon=6.63×10^(-34)×3×(10^8)×633×10^(-9)

=3.14×10^(-19) J

Hence number of photons produced in each pulse =E/e= 0.376/3.14×10^(-19)

=1.2×10^18

b) power delivered by laser= energy/time

=0.376/[1×10^(-9)]

=3.76×10^(8) watt

Hence  the power delivered by laser per pulse is 3.76×10^8 watt

To know more about Ruby laser related questions click  on below link:

brainly.com/question/3752981

#SPJ4

The assembly and disassembly of IFs are regulated by a variety of factors, including phosphorylation, subunit availability, pH, and ionic strength.

Intermediate filaments (IFs) are components of the cytoskeleton that control a variety of biological processes. IFs are typically less dynamic than microtubules and actin filaments, and they appear to be more stable. The assembly and disassembly of intermediate filaments are regulated by phosphorylation-dephosphorylation mechanisms.

The assembly and disassembly of intermediate filaments are controlled by a variety of factors. One of the primary determinants of IF dynamics is phosphorylation. Phosphorylation of specific residues on the IF proteins affects both the ability of the protein to form filaments and its stability once it has formed a filament.

In some cases, the presence of free subunits can promote filament formation, while in others, the formation of complexes between subunits can inhibit filament assembly. Changes in pH or ionic strength can also affect the assembly and disassembly of IFs.Intermediate filaments (IFs) are cytoskeletal structures that are typically more stable than microtubules or actin filaments.

To know more about filaments visit :

https://brainly.com/question/31953314

#SPJ11

To maintain a constant speed, the force provided by a car's engine must equal the drag force plus the force of friction of the road (rolling resistance). This equation ensures that the car experiences zero net force and remains at a steady speed.

The drag force is the resistance experienced by an object moving through a fluid, such as air. It depends on the density of the fluid, the object's velocity, and the cross-sectional area it presents to the fluid. In this case, assuming the density of air is 1.21 kg/m³, we can calculate the drag force using the equation:

Drag force = 0.5 * density of air * velocity² * drag coefficient * frontal area

The force of friction of the road, also known as rolling resistance, is the resistance encountered by the tires as they roll on the road surface. It depends on factors like the weight of the car and the nature of the road surface. Rolling resistance can be calculated using:

Rolling resistance = rolling coefficient * weight of the car

To maintain a constant speed, the force provided by the car's engine must equal the sum of the drag force and the force of friction of the road. This ensures that the net force on the car is zero. Therefore, the equation is:

Force provided by the engine = drag force + force of friction of the road

To know more about friction visit:

https://brainly.com/question/28356847

#SPJ11

❄ Hi there.

a pencil is composed mostly of wood.

Let's check if the other choices are right.

A. Sweaters are not made of wood

B. Tiles are not made of wood

C. Pencils are made of wood

D. Bricks are not made of wood

∴ the right choice is C.

❄

Answer:

C

Explanation:

Alpha decay

The uterus lining is rebuilt by the end of the menstrual period. The rebuilding of the uterus lining starts after menstruation and the lining is typically completely rebuilt by day 14 of the menstrual cycle, which is when ovulation occurs and the uterus is preparing to potentially receive a fertilized egg.

The endometrium is the inner lining of the uterus, and it thickens every month to prepare for pregnancy. After menstruation, the endometrium grows and thickens to prepare for the implantation of a fertilized egg. The cells in the lining multiply and enlarge, and the glands in the lining begin to secrete mucus and other substances that help support the fertilized egg and promote its growth.

The rebuilding of the endometrium usually takes about two weeks after menstruation. This process is closely regulated by hormones such as estrogen and progesterone, which are produced by the ovaries and other parts of the body. These hormones help control the growth and development of the endometrium and other reproductive tissues.

To know more about ovulation visit:

https://brainly.com/question/31872360

#SPJ11

The kinetic energy of the child at the bottom of the incline is 106.62 J.

The given parameters:

The vertical height of fall of the child from the top of the incline is calculated as;

\(sin(20) = \frac{h}{2} \\\\h = 2 \times sin(20)\\\\h = 0.68 \ m\)

The gravitational potential energy of the child at the top of the incline is calculated as;

\(P.E = mgh\\\\P.E = 16 \times 9.8 \times 0.68\\\\P.E = 106.62 \ J\)

Thus, based on the principle of conservation of mechanical energy, the kinetic energy of the child at the bottom of the incline is 106.62 J since no energy is lost to friction.

Learn more about conservation of mechanical energy here: https://brainly.com/question/332163

Newton's law of cooling relates the temperature of an object with the time. This law is the following:

Where:

Since we are asked to determien time we need to solve for "t". To do that we will subtract the temperature of the surrounding from both sides:

Now, we divide by the factor multiplying "e":

Now, we use natural logarithm on both sides:

Now, we use the following property of logarithms on the right side:

This means that we can lower the exponent, like this:

Now, we divide both sides by "-r":

Now, we substitute the values:

Solving the operations:

Therefore, the time to wait is 20.15 minutes.

In the peak of summer, it hasn't rained in a week, and the plants are looking rough, so watering the plants for an hour is a good idea.

However, the next day, you come back to the garden, and the plants look in worse shape than they did previously, as if none of that water made it to the plant. Plants absorb water through their roots. The root system of a plant is responsible for drawing water and nutrients from the soil. A plant's root system must be able to absorb water quickly in order for the plant to grow and thrive. When the soil around the root system is dry, the roots will stop growing and will not be able to absorb water.

It may even start to die. Watering plants during the peak of summer is important because it will help keep the soil moist and prevent the roots from drying out. However, watering a plant too much can be harmful. If a plant is overwatered, the water may not be able to penetrate the soil and reach the roots. Instead, it may just sit on top of the soil, causing the roots to rot and die. This can cause the plant to wilt and die.To summarize, if the soil around the plant is too dry, the roots may not be able to absorb the water you gave them, causing the plant to look worse than before. Conversely, overwatering can also be harmful because the water may not be able to penetrate the soil and reach the roots, causing the roots to rot and die.

To know more about plants visit:

https://brainly.com/question/31220793

#SPJ11

The minimum diameter of the brass wire that can withstand a tensile force of 350 N without breaking is approximately 0.052 m or 52 mm.

To determine the minimum diameter of the brass wire that can withstand a tensile force of 350 N without breaking, we need to use the formula for tensile stress:

σ = F/A

We can rearrange the formula to solve for the cross-sectional area:

A = F/σ

We also need to use the formula for the cross-sectional area of a circle:

A = π\(r^2\)

where r is the radius of the wire.

Substituting the first equation into the second equation, we get:

A = π\(r^2\) = F/σ

Solving for r, we get:

r = √(F/πσ)

Substituting the values given, F = 350 N and assuming a tensile strength for brass of

σ = 100 x \(10^6\) Pa

= 100 x \(10^6\) N/m,

we get:

r = √(350 N / (π x 100 x \(10^6\)  N/m))

≈ 0.026 m

Therefore, the minimum diameter of the brass wire that can withstand a tensile force of 350 N without breaking is approximately 0.052 m or 52 mm.

Learn more about diameter Visit: brainly.com/question/28162977

#SPJ4

the splitting of a large nucleus into smaller nuclei is the phrase that describes radioactive decay

The process through which an unstable atomic nucleus loses energy through radiation is known as radioactive decay, also known as nuclear decay, radioactivity, radioactive disintegration, or nuclear disintegration. A substance with unstable nuclei is regarded as radioactive decay

The complete question is

Which phrase describes radioactive decay? (1 point)

the triggering of one reaction by the products of another

the joining of small nuclei into a laroid nucleus

o the splitting of a large nucleus into smaller nuclei

o the spontaneous emission of radiation

To learn more about radioactive decay:

https://brainly.com/question/23743292

#SPJ9

For a 3 m long ladder leaning against a frictionless wall, the minimum value of the coefficient of static friction is mathematically given as

mu=0.2886

Generally, the equation for the Force  is mathematically given as\(-\mu N_{1}+N_{2}=0\)

Therefore

\(\mu=\frac{1}{2}tan\theta\)

\(\mu=\frac{1}{2}tan30^{0}\)

mu=0.2886

In conclusion, the minimum value of the coefficient of static friction

mu=0.2886

Read more about Force

https://brainly.com/question/13370981

the plane is on a average of 100km a hour

Answer:

on average, the plane is traveling at 100km per hour, so i think the rate is 100:1

Explanation:

Answer:

1hr I guess is the best answer

Answer: the electromagnetic spectrum

Explanation:

The full range of frequencies of electromagnetic radiation is called the electromagnetic spectrum. From longest to shortest wavelengths, it includes radio waves, microwaves, infrared light, visible light, ultraviolet light, X rays, and gamma rays.

Hope I have helped, and have a good day!!!

a) The constant k for the canned drink is approximately 0.258.

b) The temperature of the soda drink after 30 minutes will be approximately 39°F.

c) The temperature of the soda drink will be 43°F after approximately 25 minutes

(a) To determine the constant k, we can use the formula T(t) = A + (T0 - A)e^(-kt).

Given that the temperature of the drink decreases from 71°F to 61°F in 5 minutes, and the refrigerator temperature is 36°F, we can plug in the values and solve for k:

61 = 36 + (71 - 36)e^(-5k)

Subtracting 36 from both sides gives:

25 = 35e^(-5k)

Dividing both sides by 35:

e^(-5k) = 0.7142857143

Taking the natural logarithm of both sides:

-5k = ln(0.7142857143)

Dividing by -5 gives:

k = -ln(0.7142857143) ≈ 0.258

Therefore, the constant k for the canned drink is approximately 0.258.

(b) To find the temperature of the soda drink after 30 minutes, we can use the formula T(t) = A + (T0 - A)e^(-kt). Plugging in the given values:

T(30) = 36 + (71 - 36)e^(-0.258 * 30)

Calculating this expression yields:

T(30) ≈ 39°F

Therefore, the temperature of the soda drink after 30 minutes will be approximately 39°F.

(c) To find the time at which the temperature of the soda drink reaches 43°F, we can rearrange the formula T(t) = A + (T0 - A)e^(-kt) to solve for t:

t = -(1/k) * ln((T(t) - A) / (T0 - A))

Plugging in the given values T(t) = 43°F, A = 36°F, and k = 0.258:

t = -(1/0.258) * ln((43 - 36) / (71 - 36))

Calculating this expression yields:

t ≈ 25 minutes

Therefore, the temperature of the soda drink will be 43°F after approximately 25 minutes.

For more such questions on temperature, click on:

https://brainly.com/question/27944554

#SPJ8