What is the ph of a solution that results from adding 0.059 mol naoh (s) to 1.47 l of a buffer comprised of 0.391 m benzoic acid, c6h5cooh and 0.391 m sodium benzoate, c6h5coona?

Answer:

A

Explanation:

a. 2.0 miles downhill

This is because the path taken by the camper appears to go primarily downhill and is relatively short in distance. However, the actual distance may be more or less than 2.0 miles depending on the scale of the diagram.

Answer:

0.59

Explanation:

Is 0.59 because you are dividing 35.0g by 58.5 which will than give you 0.59

The buret's final base volume and record a volume that is higher than the actual value. Acetic acid content in vinegar will be overestimated in the final calculation.

In addition to its other names, acetic acid is also referred to as ethanoic acid, ethylic acid, vinegar acid, and methane carboxylic acid; its chemical formula is CH3COOH. Vinegar gets its distinctive smell from acetic acid, a byproduct of fermentation. A 4-6% acetic acid solution makes up vinegar.

Vinegar, which includes 4 to 18% acetic acid, has acetic acid as its primary ingredient. It serves as an ingredient and food preservative (known as E260).

Acetic acid is a strong irritant to the eyes, mucous membranes, upper respiratory tract, and skin when it is in vapor form. 80% or higher acetic acid solutions can be corrosive when they come into contact with the skin or eyes, severely burning any exposed tissue.

To learn more about Acetic acid refer to:

https://brainly.com/question/24304533

#SPJ4

Explanation: First split the compound into individual ions and assign oxidation states. You can give oxidation states with the help of the image provided below. Just cross-multiply the subscript. Every compound is in the format (Cation Anion). You will assign a positive charge to the cation and a negative charge to the anion. The subscript is the number of cations or anions present.

Answer:

Cambrian, Ordovician, Silurian, Devonian, Carboniferous, and Permian

Explanation:

These all occurred in the paleozoic Era I hope you do great good luck <3

Answer:

Below:

Explanation:

To calculate an energy change for a reaction: add together the bond energies for all the bonds in the reactants - this is the 'energy in' add together the bond energies for all the bonds in the products - this is the 'energy out.

Hope it helps....

It's Muska

Answer: The answer is 18.01528.

I assume you are converting between grams H2O and mole.1 grams H2O is equal to 0.055508435061792 mole.

Explanation:

Taking into account the definition of enthalpy of a chemical reaction, the quantity of heat released when 0.75 moles of Mg are burned is 451.5 kJ.

The enthalpy of a chemical reaction is known as the heat absorbed or released in a chemical reaction when it occurs at constant pressure. That is, the heat of reaction is the energy that is released or absorbed when chemicals are transformed into a chemical reaction.

The enthalpy is an extensive property, that is, it depends on the amount of matter present.

In this case, the balanced reaction is:

2 Mg(s) + O₂ (g) → 2 MgO(s) + 1204 kJ

This equation indicates that when 2 moles of Mg reacts with 1 mole of O₂, 1204 kJ of heat is released.

When 0.75 moles of Mg are burned, then you can apply the following rule of three: if 2 moles of Mg releases 1204 kJ of heat, 0.75 moles of Mg releases how much heat?

\(heat=\frac{0.75 moles of Mgx1204 kJ}{2 moles of Mg}\)

heat= 451.5 kJ

Finally, the quantity of heat released when 0.75 moles of Mg are burned is 451.5 kJ.

Learn more about enthalpy of a chemical reaction:

brainly.com/question/15355361

brainly.com/question/16982510

brainly.com/question/13813185

brainly.com/question/19521752

Answer:

Temperature is being used

Magnetic separation is a method that uses magnetic force to remove the magnetically sensitive material from a mixture. Because iron is attracted by magnets, this is the ideal method for separating sand and iron fillings.

Magnetism was the physical attribute that allowed this combination to be separated. I used the magnet to separate the iron filing from the sand in the mixture. The magnet attracted the iron filings but not the sand. We were able to separate the iron filings from the sand as a result of this.

Because iron is magnetic while the other two are not, a magnet may be used to pull the iron filings out of the mixture while leaving the salt and sand. Sand is not water-soluble, although salt is. This implies they may be combined in water and swirled together. The salt dissolves, but the sand does not.

Learn more about Magnetic https://brainly.com/question/3617233

#SPJ9

Answer:

Increasing the temperature increases reaction rates because of the disproportionately large increase in the number of high energy collisions.

Explanation:

Hope this helps :)

Explanation:

a. CGS system: centimetre as the unit of length, the gram as the unit of mass, and the second as the unit of time

b. SI system: metre as the unit of length, the kilogram as the unit of mass, and the second as the unit of time

When the reaction is subjected to pressure, the equilibrium will shift to the side with fewer gas molecules, which is the left side. Therefore, the answer is c. left.

According to Le Chatelier's principle, when a system at equilibrium is subjected to a change in pressure, it will respond by shifting in a way that reduces the effect of the change. In this case, increasing the pressure would cause the equilibrium to shift towards the side with fewer gas molecules to alleviate the increase in pressure.

Since there are fewer gas molecules on the left side of the reaction (2 CO + O2), the equilibrium will shift to the left to reduce the total number of gas molecules. This means that the concentrations of CO and O2 will increase, while the concentration of CO2 will decrease until a new equilibrium is established. Thus, the equilibrium will shift to the left.

To learn more about gas molecules click here

brainly.com/question/30832032

#SPJ11

The student at the lab table near you spills a liquid corrosive chemical on his arm. flush the burn with water would you do first  option (C)

The first step in treating a chemical burn is to flush the affected area with water for at least 20 minutes. Therefore, the correct answer is option c) flush the burn with water. This will help to remove any remaining chemical and minimize the extent of the burn.

Option a) remove the chemical with a clean cloth may further spread the chemical and cause more harm. Option b) put a sterile dressing over the burn site may be done after flushing with water to prevent contamination but should not be done first. Option d) have the person immediately remove contaminated clothes can be done after the flushing of the affected area.

Learn more about lab table

https://brainly.com/question/26440714

#SPJ4

The mass of AI needed to react with 72 g of HCI is 54 g.

To determine the mass of AI needed to react with 72 g of HCI, we can use the stoichiometry of the balanced chemical equation you provided:

2AI + 6HCI --> 2AICI3 + 3H

From the equation, we can see that 2 moles of AI react with 6 moles of HCI to produce 2 moles of AICI3.

This means that the mole ratio between AI and HCI is 2:6 or 1:3.

Given the molar mass of HCI is 36 g/mol, we can calculate the number of moles of HCI in 72 g of HCI by dividing 72 g by the molar mass of HCI:

Number of moles of HCI = mass of HCI / molar mass of HCI

Number of moles of HCI = 72 g / 36 g/mol

Number of moles of HCI = 2 moles

Since the mole ratio between AI and HCI is 1:3, the number of moles of AI needed to react with 2 moles of HCI is also 2 moles.

Now, we can use the molar mass of AI, which is 27 g/mol, to calculate the mass of AI needed to react with 2 moles of HCI:

Mass of AI = number of moles of AI × molar mass of AI

Mass of AI = 2 moles × 27 g/mol

Mass of AI = 54 g

Learn more about reactant mass here: https://brainly.com/question/26682140

#SPJ1

A similarity between the particles in liquid water and the particles in steam is their chemical composition whereas a difference between the particles in liquid water and the particles in steam is their state of matter.

Steam refers to the gas which is formed when water passes from the state of liquid to the gaseous state. Steam is formed when water molecules break the bonds i.e. hydrogen bonds that keep them together while on the other hand, a liquid is a sample of matter that takes the shape of a container in which it is placed. The term liquid is used to show the state or condition of matter.

So we can conclude that chemical composition is the similarity between liquid and steam while on the other hand, the difference in the state of matter.

Learn more about water here: https://brainly.com/question/1313076

#SPJ1

Answer:

Constant volcanic eruptions Hope this helps!

Answer:

the anwer is d

Explanation:

The phases of the moon are a result of the relative positions of the sun, the earth, and the moon. Option A is correct.

As the moon orbits around the earth, the amount of sunlight that reflects off its surface changes, causing the different phases. When the moon is between the sun and the earth, we see a new moon. When the earth is between the sun and the moon, we see a full moon. When the moon is at a right angle to the earth and the sun, we see a quarter moon.

The size of the moon has no effect on the phases, as it appears to be the same size regardless of the phase. The number of craters on the moon is also unrelated to the phases. Therefore, Student A's explanation is the most accurate and supported by scientific evidence.  Option A is correct.

To know more about the Science, here

https://brainly.com/question/12919960

#SPJ4

Answer:

The one thing they have in common is that They are mixtures

Answer:

they are both mixtures

Explanation:

Explanation:

So there are two aluminum atoms, three sulfur atoms, and 12 oxygen atoms in a single unit of the compound Al2(SO4)3. This sums to 17. Therefore, there are 17 atoms in a single unit of the compound Al2(SO4)3

Among the options listed, frost wedging is not directly related to chemical weathering.

Frost wedging is a physical weathering process that occurs in cold climates where water seeps into cracks in rocks, freezes, and expands, exerting pressure on the surrounding rock.

This expansion can cause the rock to break apart over time. While frost wedging does involve the action of water, it does not involve chemical reactions.

On the other hand, the remaining options—hydrolysis, oxidation, and decomposition—are all forms of chemical weathering. Hydrolysis is a chemical reaction where water molecules react with minerals in rocks, leading to their breakdown or alteration.

Oxidation occurs when oxygen reacts with certain minerals, such as iron, in rocks, resulting in their rusting or decomposition. Decomposition, also known as biological weathering, involves the breakdown of rocks through the actions of living organisms, such as lichens and plant roots.

Chemical weathering processes, including hydrolysis, oxidation, and decomposition, can alter the chemical composition and structure of rocks over time.

These processes play significant roles in shaping Earth's surface by breaking down and transforming various rock types.

Frost wedging, although a powerful physical weathering process, is not classified as a chemical process as it does not involve chemical reactions or changes in the mineral composition of rocks.

Learn more about Frost wedging:https://brainly.com/question/15957257

#SPJ11

Answer:

He was having a tough time as his mother abandoned him at the age of three or we can say his mother passed which led to his insecurity.

The evidence that indicated that the map made near Lake Tapps in Washington was a massive lahar from Mt. Rainier and not an old glacier: Whole logs mixed in with the rocks, Clay-sized particles and An abundance of snow and ice

The following evidence indicated that the map made near Lake Tapps in Washington was a massive lahar from Mt. Rainier and not an old glacier:

Whole logs mixed in with the rocks: The presence of whole logs mixed in with the rocks suggests a rapid and powerful flow, characteristic of a lahar, rather than the slow movement associated with glaciers.

Clay-sized particles: The presence of clay-sized particles is often associated with lahars, as they can be easily transported by the flowing volcanic material.

An abundance of snow and ice: The presence of snow and ice is indicative of a recent event, as glaciers tend to accumulate and retain snow and ice over time. In the case of a lahar, the presence of snow and ice suggests a more recent deposition.

Learn more about Evidence, here:

https://brainly.com/question/31812026

#SPJ4

The purpose of the lower air dam in the front of a vehicle is to improve aerodynamics and increase fuel efficiency. The air dam, also known as a front spoiler or splitter, is typically a protruding lip or panel located at the bottom of the front bumper.

When the vehicle is in motion, the air dam helps to redirect the airflow underneath the vehicle. It creates a smoother flow of air, reducing turbulence and minimizing drag. By reducing aerodynamic drag, the vehicle experiences less resistance, allowing it to move more efficiently through the air.

The improved aerodynamics provided by the lower air dam can result in reduced fuel consumption, as the engine does not have to work as hard to overcome air resistance. This makes the vehicle more fuel-efficient and can contribute to better overall performance.

 To learn more about vehicle click here:brainly.com/question/31843052

#SPJ11

The form of radioactivity that penetrates matter the least is alpha radiation. Alpha particles are essentially helium nuclei that consist of two protons and two neutrons. They are the heaviest and slowest-moving particles among the three main types of radiation (alpha, beta, and gamma).

Alpha particles can only travel a short distance in the air, and they are easily stopped by even a piece of paper. This is because they have a high ionization potential and lose energy rapidly as they collide with atoms and molecules in the matter they pass through.

However, they can be dangerous if they are ingested or inhaled, as they can damage living tissues and cause harm to internal organs. Therefore, precautions should be taken when handling alpha-emitting materials, such as wearing protective clothing and using appropriate shielding to prevent exposure to alpha particles.

To know more about radioactivity refer here:

https://brainly.com/question/1770619#

#SPJ11

Answer:

HC2H3O2

Explanation:

Acetic acid is a colorless organic compound liquid called ethanoic acid. It has molar mass of 60.052 g/mol. It is soluble in water. Its formula is CH3COOH. If water is combined with HC2H3O2 then it will give rise to acetic acid solution. When acetic acid is combined with water it creates hydronium and acetate ions.

Answer:

c = 0.39 J/g.°C

Explanation:

Given data:

Energy required = 242.2 J

Mass of copper = 81.6 g

Initial temperature = 27.5°C

Final temperature = 35.2°C

Specific heat capacity of copper = ?

Solution:

Specific heat capacity:

It is the amount of heat required to raise the temperature of one gram of substance by one degree.

Formula:

Q = m.c. ΔT

Q = amount of heat absorbed or released

m = mass of given substance

c = specific heat capacity of substance

ΔT = change in temperature

ΔT = 35.2°C -  27.5°C

ΔT = 7.7°C

242.2 J = 81.6 g ×c ×  7.7°C

242.2 J / 81.6 g = c ×  7.7°C

c = 3 J/7.7g.°C

c = 0.39 J/g.°C

The pressure inside the vessel would be 15 atm if we increased the temperature of the vessel to 450 K at constant volume. As a result, Option D is right.

According to the Ideal Gas Law, the pressure inside the vessel is directly proportional to the temperature (Kelvin) and the number of moles of gas present in the vessel, if the volume is kept constant. In other words, if we increase the temperature of the gas, the pressure inside the vessel will also increase.

The Ideal Gas Law equation is:

Where:

Given that V is constant, we can rearrange the equation to solve for P:

Assuming that n and V are constants, then P is directly proportional to T. So, if the temperature increases by a factor of T2/T1, the pressure will increase by the same factor.

Let's say the initial pressure was 10 atm, and the initial temperature was 400 K. Then P1/T1 = 10 atm/400 K.

When the temperature is increased to 450 K, the pressure will become:

So, when the temperature of the vessel is increased to 450 K at constant volume, the pressure inside the vessel will increase, and the answer is "d. 15 atm".

Learn more about gauge pressure here: brainly.com/question/13095072

#SPJ4