Answer:
why
Explanation:
B is the answer to the question
The correct answer for the following calculation where 43 and 7 are counted numbers and 2,310 and 0.370 are measured numbers is which of the following? 43 X 2.310 7 X 0.370 a) 38.35 b) 38.4 Oc) 38 O d) 40
The actual result of the calculation is 101.920. Therefore, none of the options provided in the question matches the correct answer.
To calculate the given expression: (43 × 2.310) + (7 × 0.370), we perform the multiplication first and then add the results.
Multiplying the counted numbers:
43 × 2.310 = 99.330
Multiplying the measured numbers:
7 × 0.370 = 2.590
Now, we add the results:
99.330 + 2.590 = 101.920
The correct answer is not provided in the given options: a) 38.35, b) 38.4, c) 38, or d) 40.
The actual result of the calculation is 101.920. Therefore, none of the options provided in the question matches the correct answer.
It's important to note that when performing calculations, it is crucial to accurately follow the order of operations (multiplication before addition) and ensure precision when dealing with decimal numbers.
In this case, the correct answer is not among the options provided, and the accurate result is 101.920.
For more such questions on calculation visit:
https://brainly.com/question/28902645
#SPJ8
what is stem distillation?how is it done?
Answer:
Steam distillation is a separation technique that harnesses the low boiling point property of immiscible mixtures.
Steam distillation is a separation technique that harnesses the low boiling point property of immiscible mixtures.it is done by passing dry steam through the plant material whereby the steam volatile compounds are volatilized, condensed and collected in receivers.
Calculate the molarity of a solution prepared by diluting 7.0 mL of 4.0 M solution to a volume of 30 mL. Select the correct answer below: 0.76 M 0.87 M 0.93 M 1.02 M
Answer:
0.93 M
Explanation:
Molarity = \(\frac{Moles}{Volume}\)
4.0M = \(\frac{x}{0.007 L}\)
4.0 M x 0.007 L = Moles = 0.028
Molarity = \(\frac{Moles}{Volume}\)
Molarity = \(\frac{0.028 moles}{0.03 L}\)
= 0.93 M
Method A: Dilute 10.00 mL up to 100 mL with a transfer pipet and volumetric flask. Then take 10.00 mL of the dilute solution and dilute it again to 100 mL.
Based on dilution methods, the dilution given is a serial dilution with dilution factor of 1/10.
What is serial dilution?A serial dilution is the stepwise dilution of a substance in solution usually using a constant dilution factor at each step of dilution.
The above dilution step is a serial dilution.
Dilution factor = original volume/final volume.Therefire, the dilution factor of the dilution above is:
initial volume = 10 mL
final volume = 100 mL
Dilution factor = 10/100
Dilution factor = 1/10
Therefore, the dilution given is a serial dilution with dilution factor of 1/10.
Learn more about serial dilution at: https://brainly.com/question/2167827
complete and balanced the precipitation reaction . include physical states in your answe.
CuCl2(aq)+ Na2CO3(aq) > .............. + ............. ?
The complete equation for the precipitation reaction will be:
CuCl₂(aq)+Na₂CO₃(aq) > CuCO₃(s) + 2NaCl(aq)
From the reaction,
CuCl₂(aq)+Na₂CO₃(aq) are the reactants while CuCO₃(s) + NaCl(aq) are the products of the reaction.
In the reactants side there is 1Cu, 2Cl, 2Na and 1CO₃ while in the products side there is 1Cu, 1Cl, 1Na and 1CO₃
To balance both sides, we multiply NaCl by 2 to balance the Na and Cl atoms.
Therefore, the final balanced equation will be
CuCl₂(aq)+Na₂CO₃(aq) -----> CuCO₃(s) + 2NaCl(aq)
This reaction is balanced, and with the appropriate physical states of the reactants and products.
Read more about chemical reactions at:
brainly.com/question/29564981
#SPJ4
Determine the volume (in liters) of a 0.511-mol sample of helium at 555 mmHg and 513 K.
Answer: 9084355.951 L if need in correct sig figs answer is
9.08 X 10^6 L
Explanation:
Ideal gas law PV=nRT = V=nrt/P
R= 62.44
n=0.511
T= 513
P= 555
V= 0.511 X 62.44 X 513 / 555
If the following ions Mg2+, Cl-, Sr2+, OH- are placed in a test tube, the precipitate formed is
Answer:
I am so sorry if I am wrong but my guess is no precipitate is formed.
Explanation:
If the following ions\(Mg^{+2}\),\(Cl^{-}\), \(Sr^{+2}\), \(OH^{-}\) are placed in a test tube, the precipitate formed is \(Mg(OH)_{2}\)
What is precipitation reaction?The chemical reaction in which white color insoluble substance formed in water is called precipitation reaction.The white solid substance accumulate at the surface or separate from the reaction is called precipitate.Why participate forms?When particular cation and particular anion in a aqueous solution combine to form an insoluble ionic solid. The reaction form precipitate or not is decide by solubility rules.To learn more precipitate about
https://brainly.com/question/24846690
#SPJ2
Give the IUPAC and common name
Answer:
IUPAC Name:
N-ethyl-N-methylaniline
Common Name:
Benzenamine
What is the oxidation state of N in NaNOz?
The oxidation state of nitrogen (N) in NaNO3 is +5. option B
To determine the oxidation state of nitrogen (N) in sodium nitrate (NaNO3), we need to assign oxidation numbers to each element in the compound.
In NaNO3, we know that the sodium ion (Na+) has a +1 oxidation state because it is an alkali metal. Oxygen (O) typically has an oxidation state of -2 in compounds, and there are three oxygen atoms in NaNO3. Since the compound is neutral, the sum of the oxidation states must be zero.
Let's assume that the oxidation state of nitrogen is x. Therefore, we can set up the equation:
(+1) + x + (-2) * 3 = 0
Simplifying the equation:
+1 + x - 6 = 0
x - 5 = 0
x = +5
Therefore, the oxidation state of nitrogen (N) in NaNO3 is +5.
The oxidation state of an element indicates the number of electrons it has gained or lost in a compound. In this case, the nitrogen atom in NaNO3 has gained five electrons to achieve a stable oxidation state of +5.
It is important to note that oxidation states are formal charges and do not necessarily represent the actual distribution of electrons in a compound. They are assigned based on a set of rules and can be useful in understanding the reactivity and behavior of elements in chemical reactions.
Option B
For more such questions on oxidation state visit:
https://brainly.com/question/25551544
#SPJ8
A sample of oxygen gas at a pressure of 1.19 atm and a temperature of 24.4 °C, occupies a volume of 18.7 liters. If the gas is allowed to expand at constant temperature to a volume of 29.4 liters, the pressure of the gas sample will be ______ atm.
Answer:
\(\boxed {\boxed {\sf 0.757 \ atm}}\)
Explanation:
We are asked to find the pressure of a gas given a change in volume. Since the temperature remains constant, we are only concerned with volume and pressure. We will use Boyle's Law, which states the volume is inversely proportional to the pressure. The formula for this law is:
\(P_1V_1= P_2V_2\)
Initially, the oxygen gas occupies a volume of 18.7 liters at a pressure of 1.19 atmospheres.
\(1.19 \ atm * 18.7 \ L = P_2V_2\)
The gas expands to a volume of 29.4 liters, but the pressure is unknown.
\(1.19 \ atm * 18.7 \ L = P_2 * 29.4 \ L\)
We are solving for the new pressure, so we must isolate the variable \(P_2\). It is being multiplied by 29.4 liters. The inverse operation of multiplication is division. Divide both sides of the equation by 29.4 L.
\(\frac {1.19 \ atm * 18.7 \ L}{29.4 \ L} =\frac{ P_2 * 29.4 \ L}{29.4 \ L}\)
\(\frac {1.19 \ atm * 18.7 \ L}{29.4 \ L} =P_2\)
The units of liters cancel.
\(\frac {1.19 \ atm * 18.7 }{29.4 } =P_2\)
\(\frac {22.253}{29.4 } \ atm = P_2\)
\(0.7569047619 \ atm =P_2\)
The original measurements all have 3 significant figures, so our answer must have the same. For the number we calculated, that is the thousandth place. The 9 in the ten-thousandth place to the right of this place tells us to round the 6 up to a 7.
\(0.757 \ atm \approx P_2\)
The pressure of the gas sample is approximately 0.757 atmospheres.
According to Boyle's law, for a given mass of ideal gas, pressure of gas is inversely proportional to the volume of gas, Provided the Temprature remains constant.
P₁ = 1.19 atmP₂ = ?V₁ = 18.7 LV₂ = 29.4 LT = constant = 24.4° C = Isothermal process\(\implies \sf P_1 V_1 = P_2 V_2 \\ \)
\(\implies \sf 1.19 \times 18. 7= P_2 \times 29.4 \\\)
\(\implies \sf 22.253= P_2 \times 29.4 \\\)
\(\implies \sf P_2 = \dfrac{22.253}{29.4} \\\)
\(\implies \underline{ \red{\boxed{ \bf P_2 \approx0.756 \: atm }}} \\\)
please help :) hope you have a good day
Answer:
the volume of the gas will decrease
Drag the tiles to the correct locations on the equation. Not all tiles will be used.
Two atoms interact with each other and change as shown by the equation. Complete the equation by filling in the missing parts.
5
2
4
3
1
H+H -
H
He
Li
+
The equation in the question is: H+H → H + H Complete the equation by filling in the missing parts. missing part is 1 → H+H-2 → →3 → He.
The atomic number of hydrogen is 1, which means it has only one proton in the nucleus and one electron in its shell. Two hydrogen atoms react with each other to form helium. Helium has 2 protons and 2 neutrons in its nucleus and two electrons in its shell. Therefore, the equation is:
H + H → HeIt can be seen that:1. H + H (Reactants)
2. → (Yields or Reacts to form)
3. He (Product)Therefore, the tiles will be arranged as shown below: 1 → H+H-2 → →3 → He
For more question atomic number
https://brainly.com/question/16858932
#SPJ8
Successful rifting can create new oceans and split apart continents. True or False
Answer:
True if by rifting you mean continental rift. If not idk.
what is sulphur mnq///oxqh///pvr joīń
Explanation:
It found a small but statistically significant association between reduced health care spending and increased death rates among children less than a year old, specifically that a10% reduction in health care spending led to an increase in infant mortality of 0.5% for boys and 0.4% for girls.
A student wants to know why sandhill crane‘s fly south for the winter. The student uses a map of North America to make a model of the paths sandhill cranes take as they migrate. The student draws lines with arrows to show the routes sandhill cranes are known to take. Which two issues describe limitations of the students models?
Answer:
a and c
Explanation:
im probably wrong though
Answer: It does not explain why the cranes fly south
It does not show when the cranes arrive at each location
Explanation:
It was on a quiz
Question 1
Unwanted radioactive products formed during nuclear reactions are called
O fossil fuels
O nuclear fuels
O nuclear reactors
O nuclear waste
Answer:
Nuclear Waste
Explanation:
Unwanted radioactive products formed during nuclear reactions are called nuclear waste. Nuclear waste is a byproduct of nuclear power generation, medical procedures, and other activities that involve the use of radioactive materials. It can include spent nuclear fuel, radioactive liquids, and other radioactive materials that are generated during nuclear reactions.
Nuclear waste is highly radioactive and can pose a risk to human health and the environment if it is not properly managed. It must be stored, transported, and disposed of in a way that minimizes the potential for exposure to radiation and contamination.
Fossil fuels, nuclear fuels, and nuclear reactors are not related to the production of nuclear waste. Fossil fuels are non-renewable energy sources such as coal, oil, and natural gas that are formed from the remains of ancient plants and animals. Nuclear fuels are materials such as uranium and plutonium that are used as fuel in nuclear reactions. Nuclear reactors are facilities that use nuclear fuel to produce electricity through nuclear reactions.
what are thetypes of luminous flame
Types of luminous flames:
1. Yellow Luminous Flame
2. Smoky Luminous Flame
3. Orange Luminous Flame
4. Blue Luminous Flame
Luminous flames are characterized by their visible glow, which is caused by the incomplete combustion of fuel. The presence of soot particles in the flame causes the emission of light. There are different types of luminous flames, which can be classified based on their fuel composition and burning conditions. Here are some common types of luminous flames:
1. Yellow Luminous Flame: This is the most common type of luminous flame, often seen in open fires, candles, and gas stoves. It appears yellow due to the presence of soot particles in the flame. Yellow flames indicate incomplete combustion of hydrocarbon fuels, such as methane, propane, or natural gas. The high carbon content in these fuels leads to the formation of soot, which emits visible light.
2. Smoky Luminous Flame: This type of flame is characterized by a significant amount of black smoke and soot production. It is commonly observed in poorly adjusted or malfunctioning burners or engines. The excessive presence of unburned fuel in the flame results in incomplete combustion and the emission of dark smoke particles.
3. Orange Luminous Flame: An orange flame indicates a higher combustion temperature compared to a yellow flame. It is often seen in more efficient burners or when burning fuels with a higher carbon content, such as oil or diesel. The higher temperature helps in burning more of the carbon particles, reducing the amount of soot and making the flame appear less yellow.
4. Blue Luminous Flame: A blue flame is typically associated with complete combustion. It indicates efficient burning of fuel, resulting in minimal soot formation. Blue flames are commonly observed in gas burners or Bunsen burners. The blue color is a result of the combustion of gases, such as methane, in the presence of sufficient oxygen.
It's important to note that the luminosity of a flame can vary depending on factors such as fuel-air mixture, combustion temperature, and the presence of impurities. Achieving complete combustion and minimizing the production of soot is desirable for efficient and cleaner burning processes.
for more questions on luminous
https://brainly.com/question/27163038
#SPJ8
What are the amount of moles in 12.15 grams of Magnesium?
2nd attempt
*
Feedback
See Periodic Table O See Hint
Calculate AEfor a system that absorbs 599,0 kJ of heat from its surroundings
and does 3510 kJ of work on its surroundings.
Answer:
-2911 kJ
Explanation:
Step 1: Given data
Heat absorbed by the system (Q): 599.0 kJ (By convention, when the systems absorbs heat, Q > 0)Work done by the system on the surroundings (W): -3510 kJ (By convention, when the systems does work on the surroundings, W < 0)Step 2: Calculate the change in the internal energy (ΔE)
We will use the following expression.
ΔE = Q + W
ΔE = 599.0 kJ + (-3510 kJ) = -2911 kJ
Which two variables determine the gravitational force between two objects?
A) their densities and the distance separating them
B) their masses and the distance separating them
C) their volumes and magnetic strengths
D) their masses and relative densities
Answer:
B
Explanation:
I did the test
Calculate the amount of heat in kilojoules required when 13.0 g of water at 52.5°C is converted to
steam at 238.2°C.
Answer:
Q = 10.10059 KJ
Explanation:
Given data:
Amount of water = 13.0 g
Initial temperature = 52.5°C
Final temperature = 238.2°C
Heat required to convert it into steam = ?
Solution:
Specific heat capacity of water is 4.184 J/g.°C
Formula:
Q = m.c. ΔT
Q = amount of heat absorbed or released
m = mass of given substance
c = specific heat capacity of substance
ΔT = change in temperature
ΔT = 238.2°C - 52.5°C
ΔT = 185.7 °C
by putting values,
Q = 13.0 g × 4.184 J/g.°C × 185.7 °C
Q = 10100.59 J
Jolue to Kj:
10100.59j × 1 KJ/1000 J
Q = 10.10059 KJ
Which location focuses its use on a nonrenewable energy source?
Natural gas power plants focus on using non-renewable energy resources.
Found in subterranean layers of rocks and sediments. Pressure and heat worked together to transform plant and animal debris into crude oil also known as petroleum coal, and natural gas. Our energy supply comes primarily from fossil fuels, with nuclear power and renewables rounding out the whole. These sources mainly come from our nearby star the Sun. Electricity falls into its own category because it is an energy medium and not a primary source.
Non-renewable energy resources are limited because they usually take time to replenish. The advantage of these non-renewable resources is that the power plants that use them can produce more electricity on demand. A non-renewable energy resource is a coal. Non-renewable energy is an energy source that will eventually run out. Most non-renewable energy sources are fossil fuels such as coal gas, and oil.
Learn more about Power plants here:-https://brainly.com/question/16064039
#SPJ1
Answer:natural gas powerplant
Explanation: because
Solder is a silver metal used to hold pipes together. When the solder is heated, it melts and acts as a type of metal "glue." Mrs. Hanley heats a piece of solder until it melts between two pipes. What best identifies the point at which a physical change first takes place?
A)when the solder melts
B)when the solder cools down
C)when the solder is a soft metal
D)when the solder becomes solid again
Answer:
A
Explanation:
Describe the fractionating column
Answer:
i dont see it
Explanation:
Answer:
A fractionating column or fractional column is an essential item used in the distillation of liquid mixtures to separate the mixture into its component parts, or fractions, based on the differences in volatilities.
Explanation:
Which of the following statements is correct concerning the class of reactions to be expected for benzene and cyclooctatetraene?
A) Both substances undergo addition reactions.
B) Both substances undergo substitution reactions.
C) Benzene undergoes addition; cyclooctatetraene undergoes substitution.
D) Benzene undergoes substitution; cyclooctatetraene undergoes addition.
Answer:
Both substances undergo substitution reactions.
Explanation:
Let us go back to the idea of aromaticity. Aromatic substances are said to possess (4n + 2) π electrons according to Huckel rule.
Aromatic substances are unusually stable and the aromatic ring can not be destroyed by addition reactions.
Since both benzene and cyclooctatetraene are both aromatic, they do not undergo addition reactions whereby the aromatic ring is destroyed. They both undergo substitution reaction in which the aromatic ring is maintained.
What mass of silver chloride is produced when 2 mole of silver nitrate is reacted with 2 moles of nickel (II) chloride
The mass of silver chloride produced when 2 mole of silver nitrate is reacted with 2 moles of nickel (II) chloride is 286.64g.
How to calculate mass using stoichiometry?Stoichiometry is the study and calculation of quantitative (measurable) relationships of the reactants and products in chemical reactions (chemical equations).
According to this question, 2 moles of silver nitrate is reacted with 2 moles of nickel (II) chloride to produce silver chloride and nickel nitrate.
Based on the balanced equation, 2 moles of silver nitrate produces 2 moles of silver chloride.
Molar mass of silver chloride = 143.32g/mol
mass = 143.32 × 2 = 286.64g
Learn more about mass at: https://brainly.com/question/9743981
#SPJ1
what is 78%
of 100? help
Answer:
78
Explanation:
You have 100%, you take 22% and get 78%
Roger has determined the point of origin of a fire at a crime scene. What should he traditionally NOT collect from
this area of the crime scene to use as evidence?
When investigative officers get to a crime scene, they do not need to collect water samples.
What is a crime scene?A crime scene is a place where an offence has been committed. It is usually cordoned off to enable investigation of the crime and the collection of samples.
When investigative officers get to a crime scene, they do not need to collect water samples.
Learn more about investigation:https://brainly.com/question/1191670
#SPJ1
Answer:A
Explanation:.
Are sperm and egg cells exact copies of the plant cell
Answer:
No
Explanation:
thats scientifically impossible
Predict the product of the following Wittig reaction. Be sure your answer accounts for stereochemistry, where appropriate. If multiple stereoisomers form, be sure to draw all products using appropriate wedges and dashes 1. PPh3 5-iodo-1-phenyl-1-pentanone 2. n-Buli 1st attempt l See Periodic Table See Hint e stereoisomers form, be sure to draw all products using appropriate wedges and dashes.
If more than one stereoisomer forms, be sure to depict each one with the proper wedges and dashes; the result is cyclopent-1-en-1-ylbenzene.
We have a Wittig reaction in this situation. The "Ylide compound" is created by mixing and n-Buli. The iodide will first be replaced by triphenylphosphine in a Sn2 reaction.
After then, the base n-Buli will eliminate an atom of hydrogen to create a double bond (Ylide compound). The double bond will then undergo delocalization, resulting in a carbanion.
The carbonyl group's carbon will be attacked by this carbanion, creating a negative charge in the oxygen. The phosphorus atom will then be attacked by the negative charge, creating a cyclic structure. In order to create the alkene, the cyclic structure is finally disrupted (cyclopent-1-en-1-ylbenzene).
To know more about Wittig reaction, click the below link
https://brainly.com/question/14525721
#SPJ4