what characterized the sound of the second wave of hip-hop, as characterized in the work of run-dmc and the beastie boys?

Nuclear energy can be considered a nonrenewable energy source because uranium deposits on Earth are exhaustible.

Nonrenewable resources

Nonrenewable energy or resources are those that are used at a rate that is faster than the rate at which they are naturally replenished.

The source of the world's nuclear energy is uranium deposits, a mineral that is nonrenewable. In other words, the uranium mineral deposit that fuels nuclear reactors can be exhausted one day because they are not replenished naturally.

More on nonrenewable resources can be found here: https://brainly.com/question/10234697

Answer:

c

Explanation:

An offshore wind, option A: blows from land to water, this is why it is also known as land breeze.

The movement of wind from land to a body of water is known as a land breeze or offshore wind. The process goes throughout the night. The land and the ocean both cool as the sun goes down. The land cools down more quickly because it has a lower heat capacity than water.

A low-pressure area develops over the sea as a result of the water's higher temperature than the land. Air rushes from the land to the sea as a result, hence the term "land breeze."

To know more about land breeze, refer:

https://brainly.com/question/11781111

#SPJ4

The term "a comparison of two- and three-dimensional neutrino-hydrodynamics simulations of core-collapse supernovae" refers to a study that aims to analyze and understand the behavior of core-collapse supernovae using different simulation techniques.

In this study, researchers are comparing the results obtained from two-dimensional and three-dimensional neutrino-hydrodynamics simulations. These simulations involve modeling the complex physics of the core-collapse supernova using the equations that describe the behavior of neutrinos and the fluid dynamics of the system.

The number "150" is not explicitly mentioned in the question, so it is unclear how it relates to the comparison. If you need further assistance or have any other specific questions, please let me know.

learn more about hydrodynamics on :

https://brainly.com/question/31639074

#SPJ11

The goal of the lab is to investigate the relationship between density and buoyancy. The lab aims to determine how different objects or substances behave in fluids and understand the principles of density and buoyancy through experimental observations and calculations.

The goal of the lab or the question being addressed in the lab report is to investigate and understand the concepts of density and buoyancy. Density refers to the measure of how much mass is contained within a given volume, while buoyancy refers to the upward force exerted on an object submerged in a fluid, such as water or air.

The lab report aims to explore the relationship between density, mass, and volume by conducting experiments and analyzing data. It may involve measurements of different objects or substances, determining their masses and volumes, and calculating their densities. The report may also involve experiments related to buoyancy, such as determining the buoyant force on an object and investigating factors affecting buoyancy.

By conducting the lab and analyzing the obtained results, the lab report aims to provide a deeper understanding of these fundamental concepts in physics and to demonstrate the principles of density and buoyancy through practical experimentation. The report may also include discussions of the significance and applications of density and buoyancy in various fields, such as engineering, architecture, and fluid dynamics.

know more about density here:

https://brainly.com/question/1978192

#SPJ8

Groundwater in the soil travels up through a plant's root system and then comes out from the leaf structure as a. transpiration.

Transpiration is a vital process in plants, where water is absorbed by roots from the soil, moves up through the plant via the xylem, and eventually evaporates from the leaf surfaces. This process plays a crucial role in regulating water and nutrient uptake, as well as maintaining plant turgor pressure and overall health. Transpiration serves several essential functions, such as cooling the plant, providing the necessary force for water and nutrient uptake, and contributing to the water cycle. It is different from other processes like sublimation, evaporation, and condensation. Sublimation refers to the direct conversion of a solid into a gas without passing through a liquid phase.

Evaporation is the transformation of a liquid into a vapor, typically occurring on the surface of the liquid. Lastly, condensation is the process where water vapor in the air turns back into a liquid state. In summary, transpiration is the process by which groundwater in the soil travels up through a plant's root system and comes out from the leaf structure, playing a vital role in the overall health and function of the plant. Groundwater in the soil travels up through a plant's root system and then comes out from the leaf structure as a. transpiration.

learn more about evaporationhere:

https://brainly.com/question/320765

#SPJ11

Answer: Foods that naturally are nutrient-rich include fruits and vegetables. Lean meats, fish, whole grains, dairy, legumes, nuts, and seeds also are high in nutrients.

Answer:

it is to tell the amount of time that has elapsed between activation and deactivation

Explanation:

Wave speed is related to wavelength and wave frequency by the equation: Speed = Wavelength x Frequency. This equation can be used to calculate wave speed when wavelength and frequency are known.

The point between the two charges where the electric field equal to zero is calculated to be 1.55 m.

The charge q₁ is given as 3 nc = 3 × 10⁻⁹ c

It is located at x₁ = 0.

The charge q₂ is given as 7.5 nc = 7.5 × 10⁻⁹ c

It is located at x₂ = 4 m.

Let us suppose that, electric field is zero at the point x, it is in between 0 and 4 m.

We know the formula for electric field as,

E = k q /r²

Let us equate the electric field at both the charges.

k q₁/x² = k q₂/(x₂ - x)²

q₁ (x₂ - x)² = q₂ x²

3 × 10⁻⁹× (4 - x)² = 7.5 × 10⁻⁹ × x²

3 × ( 16 + x² - 8x) = 7.5 ×x²

48 + 3x² - 24x = 7.5x²

4.5 x² + 24x - 48 = 0

The two values of x are,

x = 1.55, -6.883

The distance cannot be negative. So, the electric field at x = 1.55 m is said to be zero.

Thus, the required value of x is 1.55 m.

To know more about electric field:

https://brainly.com/question/4273177

#SPJ4

Cold water does not react with iron. Iron, however, interacts with steam to create iron and hydrogen oxide. Fe3O4 + 4H2 = 3Fe(s) + 4H2O. Iron (II, III) oxide, also known as ferric oxide (Fe3O4), is a combination of Fe O and Fe2O3.

Ferric oxide (Fe2O3) and hydrogen gas are produced when ferrous oxide (Fe O) and water (H2O) combine (H2). This reaction yields a black solid called Fe3O4, which is frequently used as an antirust pigment. Understanding the chemical equation for this reaction is required to determine whether a specific mixture will produce Fe3O4: 2Fe3+(aq)+3H2 = 2Fe(s)+3H2(g) (g). According to this equation, two moles of iron metal will interact with to create two moles of ferric ion and three moles of hydrogen gas, it takes three moles of hydrogen gas. All of the iron will be transformed to Fe3+ ions and no Fe3O4 will occur if the combination only contains one mole of each component.

To know more about Rusting , visit-https://brainly.com/question/13026484

#SPJ13

Answer:

Breaking bones, injuring tendons, bruising

Explanation:

Answer:

mechanical wave -> a wave that requires a medium through which to travel

wave -> a disturbance that transfers energy from one place to another place

medium -> the matter that waves flow through

Answer:

Medium - The matter that waves flow through

Mechanical wave - A wave that requires a medium through which to travel

Wave - A disturbance that transfers energy from place to another

.

Hope this helps! <3

Answer:

suppose frequency of sound = 100Hz

then wavelength = speed/ frequency

= 340/100= 3.4 m

Answer:

A mall swimming 14 miles in 20 minutes

Explanation:

1.Well you have to covert both into fractions

14/20 and 15/25

2. Then convert both denominators to the same number

14/20 times 5 =70/100 and 15/20 times 4=60/100

3. Simplify

70/100=7/10 and 60/100=6/10

4.see which one is greater

answer: a mall swimming 14 miles in 20 minutes

Answer:

repeat using same variables

Explanation:

have peer repeat using same variables

The acceleration of the object is 5 m/s². The result is obtained by using the Newton's second law.

The Newton's second law states that "The acceleration is directly proportional to the net force acting on an object and inversely proportional to the object's mass." It can be expressed as

a = ∑F/m

Where

An object with a mass of 12 kg is acted upon by a force of 60 N.

Find the acceleration of the object!

Using the Newton's second law formula, we get acceleration.

a = ∑F/m

a = 60/12

a = 5 m/s²

Hence, the acceleration of the object is 5 m/s².

Learn more about Newton's second law here:

brainly.com/question/30396994

#SPJ4

Answer:

3.9 x 10^-7 m.

Explanation:

We know that the formula of speed is velocity = frequency x wavelength.
rearranging the equation we get wavelength= velocity/frequency.

If you plug in the value you get wavelength= 3.0 x 10^8 m/s / 7. 7 x 10^14 hz

wavelength= 0.00000038961 m and if you write it in standard form it

is 3.9 x 10^-7 m.

The potential energy of a stone of mass 10 kg that is lifted to a height of 8m is -784 Joule.

Potential energy is essentially what it sounds like, though there are some nuances. An object's actual potential energy is determined by its position in relation to other objects. For example, a brick suspended from a two-story building has more potential energy than a brick resting on the ground. This is due to the brick's relative position to the Earth providing it with more energy. However, because there is no force acting on them, two bricks next to each other do not give each other more energy.

Given,

Mass of stone = 10kg

Height = 8m

Potential energy can be determined by formula,

P=mgh

Where, g= gravitational acceleration = \(-9.8 m/s^2\)

Here, gravitational acceleration is negative because stone is thrown against the gravitational pull

\(P=10*8*(-9.8)=-784 J\)

Hence, the potential energy is -784 J

To learn more about potential energy refer here

https://brainly.com/question/28910674

#SPJ4

The work done on the closed system consisting of 2 kg of water initially at 160°C and 10 bar, undergoing an internally reversible, isothermal expansion with energy transfer by heat into the system of 2700 kJ, is positive and can be calculated as follows:

The given problem involves an isothermal process, which means the temperature of the system remains constant throughout the process. According to the first law of thermodynamics, for an isothermal process, the work done is equal to the heat transferred into the system.

Given:

Mass of water (m) = 2 kg

Initial temperature (T) = 160°C = (160 + 273.15) K = 433.15 K (converting to Kelvin)

Initial pressure (P) = 10 bar = 10 × 10⁵ Pa (converting to Pascal)

Heat transferred (Q) = 2700 kJ = 2700 × 10³ J (converting to Joules)

Since the process is isothermal, the work done (W) is equal to the heat transferred (Q) into the system, i.e., W = Q.

Substituting the given values, we get:

W = 2700 × 10³ J = 2700 kJ

So, the work done on the system is 2700 kJ, and it is positive as the heat is transferred into the system during the expansion process.

To know more about isothermal process refer here:

https://brainly.com/question/12023162#

#SPJ11

Answer:

Speed of the satellite V = 6.991 × 10³ m/s

Explanation:

Given:

Force F = 3,000N

Mass of  satellite m = 500 kg

Mass of earth M = 5.97 × 10²⁴

Gravitational force G = 6.67 × 10⁻¹¹

Find:

Speed of the satellite.

Computation:

Radius r = √[GMm / F]

Radius r = √[(6.67 × 10⁻¹¹ )(5.97 × 10²⁴)(500) / (3,000)

Radius r = 8.146 × 10⁶ m

Speed of the satellite V = √rF / m

Speed of the satellite V = √(8.146 × 10⁶)(3,000) / 500

Speed of the satellite V = 6.991 × 10³ m/s

An experience that forces an individual to confront an existential issue is known as a boundary situation in this type of context.

This type of situation is characterized by negative consequences which the individual tries to escape from in an unfruitful attempt. It usually makes the individual feel like it can't be overcome and is also likely to enter deep into the crisis.

This experience forces an individual to confront an existential issue so as to prevent it from escalating into a very difficult position and to promptly address the situation through employing different types of techniques. This ensures that a reoccurence doesn't come up in this type of situation.

This is therefore the reason why boundary situation was chosen as the most appropriate choice.

Read more about Boundary situation here https://brainly.com/question/14298823

#SPJ1

The person's complete trip was a 6km round trip because they traveled 3km north and then 3km south, returning to their original location.

A trip is a journey or excursion to some destination, usually for a specific purpose. It can be as short as a day trip or as long as a round-the-world adventure. A trip typically involves travel by foot, car, railroad, boat, or airplane and often involves multiple destinations. It may also involve activities such as camping, hiking, sightseeing, and other leisure activities. Travelers usually plan trips in advance to ensure they have enough time to see and do the things they want to. Trips can also be spontaneous, with travelers deciding on the fly where to go and what to do.

To learn more about trip
https://brainly.com/question/28997569
#SPJ1

a) The elevation difference between the two towns is 407.9 meters.

b)  The absolute error in the elevation difference between the two towns is 0.5 meters.

(a) To calculate the elevation difference, h, between the two towns, we subtract the elevation of town A from the elevation of town B:

h = Elevation of town B - Elevation of town A

h = 923.5 m - 515.6 m

h = 407.9 m

Therefore, the elevation difference between the two towns is 407.9 meters.

(b) To calculate the absolute error in h, we need to consider the uncertainties associated with the elevations of town A and town B. The absolute error in h can be calculated by adding the absolute errors of the individual elevations:

Absolute error in h = Absolute error of town A + Absolute error of town B

Absolute error in h = 0.2 m + 0.3 m

Absolute error in h = 0.5 m

Therefore, the absolute error in the elevation difference between the two towns is 0.5 meters.

To learn more about elevation  here

https://brainly.com/question/29271925

#SPJ4

The complete question is:

The elevations and their errors are as follows: Elevation of town A = 515.6 m ± 0.2 m Elevation of town B = 923.5 m ± 0.3 m (a) Calculate the elevation difference, h, between the two towns. (b) Calculate the absolute error in h.

Answer:

Explanation:

Question 1:

Given;

a counterweight of mass, m = 2-kg

distance moved by this weight, d = 0.5 meters

the gravitational force of the counterweight is calculated as;

F = mg

where;

F is gravitational force

m is the mass

g is acceleration due to gravity

F = 2 x 9.8 = 19.6 N

Thus, the gravitational force of the counterweight is 19.6 N

Question 2:

Given;

a counterweight of mass, m = 2-kg

height moved by this weight, h = 0.5 meters

the work done is calculated as;

Work done = Force x distance moved by this weight

Work done = 19.6 x 0.5 = 9.8 J

Thus, the work done is 9.8 J

Answer:

0.05 kgm/s

Explanation:

Physical weathering is the type of weathering that is most likely to be associated with colder climates.

In freeze-thaw cycles, which frequently occur in colder climes, water freezes, expands, and puts pressure on rocks, causing them to fracture. An illustration of physical weathering is this. Additional types of physical weathering that can happen in colder climates include thermal expansion, which happens when rocks expand and contract as a result of temperature fluctuations, and frost wedging, which happens when water freezes in cracks in rocks and causes them to enlarge. On the other hand, chemical weathering is more prevalent in hotter, wetter regions where there is more water and moisture to support chemical reactions that decompose rocks. Any climate can experience biological weathering, but warm, humid regions with more plant and microbial activity are where it is most likely to happen.

Learn more about weathering here:

https://brainly.com/question/14426457

#SPJ4

Answer:

radiation heat.

Explanation:

That is any heat that passes through the air, like the sun.

Answer:

radiation

Explanation: I’m sure

pls mark as brainliest if possible

We are asked to determine the distance between crest of a sound wave that has a frequency of 440 Hz. To do that we will determine the wavelength using the following formula:

Where:

The speed of sound at 20°C is equal to:

Now, we substitute the values:

Solving the operations:

Therefore, the distance from crest to crest is 0.78 meters.

Now, we are asked to determine the time it takes the string to go from the crest to the trough. To do that we will determine the period first using the following formula:

Now, we substitute the frequency:

Now, since the time it takes to go to crest to trough is half the time it takes the wave to go from crest to crest we divide the result by two:

Therefore, the time is 0.0012 seconds.