What are the advantages of triggering circuit
for thyrestors?

Answer:

D. 90 degrees.

Explanation:

Torque is a rotational force which moves an object in other direction. There should be 90 degrees out of phase to start, run winding currents with each other. Torque is produced by the rotational motion of an object. The angle of the object must be 90 degrees set in order to create torque.

The Bidirectional Shift Register is the shift register that allows one to write a 5bit register if the series is shifted from left to right.

A 5-bit register is valuable because it can represent up to 32 items. It is to be noted that a bit is a digit that is binary that is indicative of two states.

While a 5-bit register can have a possible number of 32 values,

Learn more about registers at;
https://brainly.com/question/19091159
#SPJ1

Answer: Individuals certified in CPR, this includes EMS an dbystanders thet know how to do CPR

Only the individuals that are certified in CPR should perform CPR on accident victims.

Cardiopulmonary resuscitation (CPR) is performed when a person stops breathing. CPR is done in order to save the live of the person and this should be down by someone whom is trained.

In this case, someone who is certified in CPR such as a doctor etc should be the one that will perform the CPR.

In conclusion, the correct option is "individuals certified in CPR".

Read related link on:

https://brainly.com/question/6945591

Answer: So you are dealing with maximum and minimum weights and you want to know what MINIMUM number of supporting strands for this block and tackle system are needed I believe. If so you are dealing with economic imbalances Though we are not worrying about money Right? Right we need physics which Physics study matter and how it moves You would need 8 STRANDS

Explanation: Step By Step

To find the total electric flux density at point P1(4, -3, 1), calculate the electric field contribution from each point charge (2μC, 6μC, and 10μC) and sum them up.

To find the total electric flux density at point P1(4, -3, 1), we need to calculate the electric field contribution from each point charge (2μC, 6μC, and 10μC). The electric field at a point due to a point charge is given by Coulomb's law. By considering the distance between each point charge and point P1, we can calculate the electric field vectors. Then, by summing up the electric field vectors from each charge, we obtain the total electric field at point P1. The magnitude and direction of this total electric field represent the electric flux density at that point.

Learn more about electric flux density here:

https://brainly.com/question/33224621?

#SPJ11

Answer:

Gently push the micropipette into the tip box and tag tightly to load the tip.

Explanation:

The recommended practice when putting a tip on a micropipette is ;  Gently push the micropipette into the tip box and tag tightly to load the tip.

Given that it is not advisable to remove tip from rack so as not to contaminate it, if we want to put a tip on a micropipette we should gently push the micropipette into the tip box.

Answer:

STICK SKILL DRILL...

Explanation:

The skill drill uses a Whip and Pause technique.The reason for whip and pause is that 6010 electrodes are fast freezing electrodes and the momentary whips allow the puddle to solidify a bit ..Length of Art..Too long an arc causes problems so try to keep the arc equal to or shorter than diameter of electrode.

Answer: There are no major convergent boundaries in the Atlantic, which is where these events are more likely to occur

Explanation:

A type of electrical tape used to provide a protective overwrap for high-voltage cable is high temp silicone rubber.

High Temperature Vulcanizing Silicone Rubber is another name for Heat Cured Rubber Elastomers (HTV).

They're made of reactive silicone gums, or straight chains of very high molecular weight macromolecules with various reactive groups.

High temperature limits for silicone seals and gaskets are typically 400° F to 450° F and low temperature limits are -65° F to -100° F.

As a result, silicone is the preferred material for applications requiring high temperatures.

A category of electrical tape that is utilized as a barrier protection overwrap for high-voltage cable is high temp silicone rubber.

For more details regarding electrical tape, visit:

https://brainly.com/question/15499337

#SPJ1

Answer:

Bluetooth is a slow wireless technology used to connect devices within a radius of about 30 feet. While Bluetooth technology is amazing, there are lots of bugs involved with Bluetooth devices, and there is still lots to be discovered in this area of tech.

Answer:

15 000 000 Ohms

Explanation:

1 Mega Ohm = 1 000 000 Ohms

So,

15 Mega ohms =15 000 000 Ohms

Power delivered to the resistor in watts is 2.5 watts

Given:

Energy absorbed by resistor = 540 J

Time taken by resistor = 3.6 min

Find:

Power delivered to the resistor in watts

Computation:

Time taken by resistor = 3.6 min

Time taken by resistor = 3.6 × 60

Time taken by resistor = 216 sec

We know that;

Energy = Power × Time

So,

540 = Power × 216

Power = 540 / 216

Power = 2.5 watts

Learn more:

https://brainly.com/question/2581527?referrer=searchResults

Answer:

There are 50 ASE certification tests, covering almost every imaginable aspect of the automotive repair and service industry.

Explanation:

yww <33

There are a total of  50 certifications for automotive technicians.

in September 2021, the National Institute for Automotive Service Excellence (ASE) offers a total of 50 certifications for automotive technicians.

These certifications cover various areas of specialization, including engine repair, electrical systems, brakes, suspension and steering, heating and air conditioning, and more.

Each certification requires passing a written exam and meeting specific work experience requirements

Learn about technicians at: https://brainly.com/question/18428188

#SPJ6

Answer: Shielding gas solenoid

Explanation:

(a) The increase in vertical stress beneath the center of one column of a water tower on a mat foundation at a depth of 2 to 30 m is 3.92 kPa.

(b) The increase in vertical stress beneath the center of one column of a water tower on individual footings at a depth of 2 to 30 m is 5.09 kPa.

The total increase in stress was 5.09 kPa.

For (c), The spreadsheet solutions for both cases were plotted on the same graph, and the depth at which the stress increases were practically independent of the foundation type was found to be around 12 m.

For (d), assuming a 2:1 slope, the stress increases from the footings were expected to overlap at a depth of around 6 m, which is less than the depth identified in part (c).

To know more about vertical stress visit:

brainly.com/question/18958947

#SPJ11

Sure! Here's an example of a program in C++ that reads exam scores from a file and generates a histogram of stars based on the frequency of each unique score:

#include <iostream>

#include <fstream>

#include <vector>

void generateHistogram(const std::vector<int>& scores) {

   const int maxScore = 100;  // Assuming maximum score is 100

   std::vector<int> frequency(maxScore + 1, 0);

   // Count the frequency of each score

   for (int score : scores) {

       if (score >= 0 && score <= maxScore) {

           frequency[score]++;

       }

   }

   // Generate histogram

   for (int i = 0; i <= maxScore; i++) {

       std::cout << i << ": ";

       for (int j = 0; j < frequency[i]; j++) {

           std::cout << "*";

       }

       std::cout << std::endl;

   }

}

int main() {

   std::ifstream inputFile("midterm.txt");

   if (!inputFile) {

       std::cout << "Failed to open the input file." << std::endl;

       return 1;

   }

   std::vector<int> scores;

   int score;

   // Read scores from the file

   while (inputFile >> score) {

       scores.push_back(score);

   }

   inputFile.close();

   // Generate histogram

   generateHistogram(scores);

   return 0;

}

To use this program, make sure you have a file named "midterm.txt" in the same directory as your C++ program. The file should contain the exam scores separated by spaces or newlines.

The program reads the scores from the file, counts the frequency of each score, and then generates a histogram using asterisks (*). Each line of the histogram represents a unique score, and the number of asterisks represents the frequency of that score.

To know more about histogram, visit:

https://brainly.com/question/16819077

#SPJ11

According to the given statement, technician a says that some FWD vehicles use unequal length front driveshafts called half shafts. Technician b says that unequal length driveshafts may cause a pull during hard acceleration called torque steer. It is required to determine which technician is correct.

Here is the answer: The answer is Technician B is correct because the unequal length driveshafts may cause a pull during hard acceleration called torque steer. In FWD vehicles, unequal length front driveshafts are called half shafts. Half shafts are used in FWD (front-wheel drive) systems to transfer power from the engine/transaxle to the front wheels to make them spin.

Torque steer is a phenomenon in which the unequal length of the half-shafts causes the wheels to pull in the direction of the longer side.

Technician a says that some fwd vehicles use : https://brainly.com/question/14040365

#SPJ11

Answer:

4

Explanation:

Sawmills and producers of timber and lumber products use the board foot as a unit of measurement to precisely determine how much wood may be removed from a log or plank.

This computation can be used to solve engineering issues involving mass and heat transport. A text file called a "server log" keeps track of all activity involving a particular server over a given period of time.

The actual computer which a server programme runs on in a data centre is also usually referred as a servers.

For instance, a Web server just on World Wide Web is indeed a computer that utilises using HTTP protocol to transfer Web content to a browser in response to a client request.

To know more about log visit :

https://brainly.com/question/28596588

#SPJ4

The use of extra pads for outriggers in crane operations is beneficial for stability and safety. However, it is important to follow safety guidelines and not stack the pads on top of each other. These pads should be placed in a single layer to spread the load evenly and improve overall stability. Placing extra pads in violation of safety guidelines is not safe.

Outriggers have an important role to play in safety and balance when it comes to crane operations, particularly in rugged terrains and areas with uneven soil, deep excavations, and heavy loads. The outrigger pads, which are made of wood, aluminum, or high-strength plastic, serve as a base for the outriggers to provide a secure foundation for the crane's support legs to work on the ground.

Hence, when the crane lifts heavy loads, the outrigger pads help to spread the load evenly across a wider surface area, reducing ground pressure and increasing stability.

Below are the true statements about extra pads for outriggers:

1. Extra pads for outriggers may be utilized to increase stability, but they must not be stacked on top of each other.

2. Extra pads for outriggers should be used to increase the surface area of support when working on rough or delicate surfaces.

3. Extra pads for outriggers may be placed in a manner that violates the correct safety guidelines.

4. Extra pads for outriggers may be utilized to boost the crane's ability to operate on a slope.

The incorrect statement among the alternatives is: Extra pads for outriggers may be placed in a manner that violates the correct safety guidelines.

When setting up an outrigger-supported crane, it is critical to follow the manufacturer's directions for proper outrigger positioning, including ground conditions, pad positioning, and leveling. The pads should be placed in a single layer to improve the crane's overall safety and stability. Also, the pads should be used in compliance with the specified load capacity, and the crane should never be operated beyond its rated capacity.

Therefore, it is not safe to place extra pads in such a manner that it violates the safety guidelines.

Learn more about outriggers

https://brainly.com/question/23653582

#SPJ11

Answer:

yes it can, it works with the form system

The true power is obtained as 70.7 VA.

We define the power a the rate of doing work, we know that the power in a circuit is the product of the current and the voltage. In this case, we want to find the true power thus we have to involve the use of the phase shift in degrees.

Thus;

True power = PcosΦ

P =  100 VA

Φ = 45 degrees

True power =  100 VA * cos 45 degrees

True power = 70.7 VA

Learn more about power in a circuit:https://brainly.com/question/2933971

#SPJ1

The continuity equation allows finding the results for the speed and flow of the outlet pipe are:

Fluid mechanics studies the movement and fluid dynamics, it is described  by two fundamental relationships:

          \(P_1 + \frac{1}{2} \rho v_1^2 + \rho g y_1 = P_2 + \frac{1}{2} \rho v_2^2 + \rho g y_2\)  

Where P is the pressure, v the velocity, y the height, the subscripts are two selected points of interest in the pipe.

            \(A_1v_1 = A_2 v_2\)

Where A₁ and A₂ is the area of ​​the inlet and outlet pipes and v₁ and v₂ are the velocities of the fluid at the inlet and outlet

They indicate the inlet and outlet diameters of the pipe are d₁ = 0.02 m and d₂ = 0.1 m, the inlet velocity v₁ = 10 m / s, with the continuity equation let's find the outlet velocity

         \(v_2 = ( \frac{A_1}{A_2} )^2 \ v_1\)  

the cross section of the tavern is

        A = \(\pi r^2 = \pi \ d^2/4\)  

Where r is the radius and d is the diameter

Let's substitutes

        \(v_2 = (\frac{d_1}{d_2} )^2 \ v_1\)  

        \(v_2 = (\frac{0.02}{0.1} )^2 \ 10\)  

        v₂ = 0.4 m / s

The flow  (Q) is defined as the amount of liquid that passes through the section of the pipe per unit of time, we can see that this is the same conservation of mass, therefore

        Q = A v

        Q = \(\pi \frac{d_2^2}{4} \ v_2\)π d2 ^ 2 v2

        Q = \(\pi \ \frac{0.1^2}{4} \ 0.4\)

        Q = 3.14 10⁻³ m ^ 3 / s

As the transported liquid is water

         1 liter water = 1 kg

Consequently

         1 m³ = 1000 liter = 1000 kg of water

Let's reduce the flow

         Q = 3.14 10⁻³ m³/s ( \(\frac{10^3 kg}{1 m^3}\) )

         Q = 3.14 kg / s

In conclusion using the continuity equation we can find the results for the speed and flow of the outlet pipe are:

Learn more here: brainly.com/question/14747327

The original amounts of the liquids A and B based on the information will be 1260kg and 872kg.

An equation is the statement that illustrates that the variables given. In this case, two or more components are taken into consideration to describe the scenario. It is vital to note that an equation is a mathematical statement which is made up of two expressions that are connected by an equal sign.

Based on the information given, let us call the liquids illustrated as A and B, while the weight is in kg.

The first equation is the amount of solids and this will be represented thus:

0.05A + 0.11B + 18.5 = 0.0825(2150) = 177.375

0.05A + 0.11B = 158.875

5A + 11B = 15887.5

The second equation will be represented thus:

A + B + 18.5 = 2150

Collect like terms

A + B = 2150 - 18.5

A + B = 2131.5

Multiplying the equation will be:

6B = 5230

Divide through by 6

6B / 6 = 5230 / 6

B = 872 kg

Therefore, A will be 1260 kg.

Learn more about liquid on:

https://brainly.com/question/752663

#SPJ1

Answer:

0.2

Explanation:

Since the span and chord of the rectangular wing is missing, due to it being from the other question, permit me to improvise, or assume them. While you go ahead and substitute the ones from your question to it, as it's both basically the same method.

Let the span of the rectangular wing be 0.225 m

Let the chord of the rectangular wing be 0.045 m.

Then, the area of any rectangular chord is

A = chord * span

A = 0.045 * 0.225

A = 0.010 m²

And using the weight of the glider given to us from the question, we can find the LER for the wing.

LER = Area / weight.

LER = 0.010 / 0.05

LER = 0.2.

Therefore, using the values of the rectangular wing I adopted, and the weight of the glider given, we can see that the LER of the glider is 0.2

Please mark brainliest...

Answer: 0.2025

Explanation: I got it correct

Directly proportional.

As the inductive reactance is directly proportional to the frequency, by increasing the frequency the inductive reactance of the inductor increases.

You can learn more through the link below:

https://brainly.com/question/17330686#SPJ4

Answer:

International Film Festival

Judging the best best film:

a. The probability that out of five judges (random sample),  three are in favor of film FA is:

= 33%.

b. The demerits of classical probability are:

1. Classical probability can only be used with events that have definite numbers of possible outcomes.  

2. Classical probability can only handle events where each outcome is equally likely.

3. Classical probability is based on the assumption of linear relationship (which is not always true in real life) between the latent variable and observed scores.

Explanation:

a) Number of judges = 11

Number of judges in favor of FA film = 6

Number of judges in favor of FB film = 5

Probability of judges in favor of FA film = 6/11

Probability of judges in favor of FB film = 5/11

Random sample of judges = 5

Probability that out of five judges, three are in favor of film FA = 3/5 * 6/11

= 18/55

= 33%

b) Classical probability is the simple probability showing that each event has equal chance of happening.  It can be contrasted with empirical probability that is obtained from experiments.