these engineers analyze the process of mass-producing a product. they are responsible for plant layout, material handling, scheduling, quality control, reliability control, and cost production optimization.
Answers
Industrial engineer analyse the process of mass producing a product. they are the reason for plant layout, material handling, scheduling, quality control, reliability control, & cost production optimization.
What is an Industrial engineer?A branch of engineering management known as "industrial engineering" spans a number of disciplines related to producing industrial or consumer goods and is focused on improving things. Increased productivity, cost production optimization, better quality control, protection of the environment, a focus on employee health and safety, and adherence to legal requirements are some examples of this.
By streamlining procedures and processes, industrial engineers aim to minimise any wastage of resources such as time, money, materials, energy, or other. To do this, it is necessary to use specialised knowledge and abilities to specify, forecast, and evaluate the outcomes of processes and systems.
Learn more about industrial engineers
https://brainly.com/question/13092436
#SPJ4
Related Questions
in the us, more electricity is generated from ____ than from any other source. A) geothermal. B) biomass. C) solar. D) hydroelectric. E) wind.
Answers
In the US, hydroelectricity is the source from which the most electricity is produced.
Who produces the most renewable energy in the US?The largest source of renewable electricity in the nation as of 2019 is wind power. In 2020, wind energy produced 337.9 terawatt-hours of electricity, or 8.4% of the country's overall electricity production and 43.2% of all renewable electricity production.
What type of renewable energy is most prevalent in the US?In the nation, wind has surpassed hydroelectricity to become the leading renewable source of electricity generation. Petroleum, natural gas, and coal made up around 79% of all primary energy produced in the United States in 2021.
To know more about hydroelectricity visit:-
https://brainly.com/question/11381878
#SPJ4
Liquid natural gas is transported by a ship. A typical LNG tank Liquid natural gas may have a capacity of 105 m3. If this fuel is used to provide for a city a population of a million and each person consumes power at an average rate of 10 kw, how long would the LNG last?
* The volume of Liquefied natural gas (LNG) is 1/600 that amount of natural gas (STP).
Answers
The solute hcl is diffusing through a thin film of water 2 mm thick at 283k. The conc. Of hcl at point 1 is 12wt%hcl (density is 1060kg/m3) and at point 2 is 6 wt%( density= 1030). The diffusivity is 2.45*10^-9 m2/sec.Calculate flux of hcl.
Answers
All of the following are common causes of low engine compression except for
A. too much oil
B. defective valves.
C. weak piston rings.
D. bent pushrods
Answers
Answer:
B
Explanation:
Over filling of oil on an engine will not cause loss of compression. The crankshaft splashes it inside the engine and will come out the dip stick tube and breather on valve cover and it may splash up to the bottom of the pistons and force oil to the top through the rings
Consider a convergent-
Answers
4.
Describe the correct use of any equipment used to protect the health and safety of themselves and
their colleagues
Answers
Items such as gloves, safety goggles, shoes, earplugs, respirators, hard hats, coveralls, vests, and full body suits are examples of personal protection equipment.
What equipment is used for safety and protection?Wearing a safety helmet when using a power tool, donning the proper protective clothing when working with chemicals, and taking all necessary safety precautions when operating machinery are all examples of how to use equipment correctly to safeguard their own health and the health and safety of their coworkers.
Healthcare Facilities Using PPE Gloves shield the hands; gowns or aprons shield the skin or clothing; masks and respirators shield the mouth and nose; goggles shield the eyes; and face shields shield the full face. consisting of goggles, gloves, gowns, shoe covers, head coverings, masks, and respiratory equipment.
PPE, or personal protective equipment, is gear that shields users from harm to their health or the danger of accidents. It may consist of equipment like safety harnesses, gloves, eye protection, high-visibility clothes, safety footwear, and respiratory protective equipment (RPE).
To learn more about health equipment refer to :
https://brainly.com/question/28489100
#SPJ1
A 75-hp, 850 r/min, 500-V series motor has an efficiency of 90.2 percent
when operating at rated conditions. The series field has 30 turns/pole, and
the motor parameters are:
Armature
0.1414 ohms
IP + CW
0.0412 ohms
Series
0.0189 ohms
Resistance,
The motor has a maximum safe speed of 1700 r/min. Is it safe to operate the
motor with a 10-hp shaft load? Use the magnetization curve in Figure
11.16, and show all work. Neglect changes in windage and friction
Answers
It is not safe to operate the motor with a 10-hp shaft load.
Explanation :
Solution-
First, determine the rated speed and current of the motor:
Rated speed = 850 r/min
Rated current = 500 V / (0.1414 ohms + 0.0412 ohms + 0.0189 ohms) = 30.22 A
Next, determine the speed and current for a 10-hp shaft load:
Speed = 1700 r/min
Current = 10 hp / (75 hp * 0.902) = 0.1343 A
Finally, determine whether it is safe to operate the motor with the 10-hp shaft load using the magnetization curve. we can see that the current at 1700 r/min is 0.1264 A, which is less than the current for the 10-hp shaft load (0.1343 A).
To know more about speed
https://brainly.com/question/28224010
#SPJ1
4.) At the top of hill, the reading of the barometer is 65cm Hg. Express (3 Marks) the same in 'kpa' and in 'psi'.
Answers
The pressure at the top of the hill is 569.94 kPa and 82.638 psi. A barometer is a measuring device used to measure atmospheric pressure.
A mercury barometer's standard atmospheric pressure reading is 760 mm of mercury (Hg). The reading of the barometer is 65 cm of Hg at the top of the hill. In order to express the reading of the barometer in kPa and psi, we can use the following conversion factors:1 atm = 101.325 kPa1 atm = 14.696 psi The pressure at the top of the hill is:65 cm of Hg = 65/100 m of Hg The density of mercury is 13.6 g/cm³, so the mass of mercury supported by a 1 cm² column is 13.6 g. As a result, a 65/100 m of Hg column has a mass of 13.6 * 65/1000 = 0.884 g/cm².So, at the top of the hill:Pressure in Pa = density of mercury * gravity * height of columnPressure in Pa = 0.884 * 9.8 * 65/100Pressure in Pa = 569.936 Pa = 569.94 kPa (rounded to 3 decimal places)To calculate the pressure in psi,Pressure in psi = 569.94 kPa / 6.8948 psiPressure in psi = 82.638 psi (rounded to 3 decimal places)Therefore, the pressure at the top of the hill is 569.94 kPa and 82.638 psi.
Learn more about barometer :
https://brainly.com/question/28549362
#SPJ11
Consider a steam power plant that operates on the ideal reheat Rankine cycle. The plant maintains the boiler at 5000 kPa, the reheat section at 1200 kPa, and the condenser at 20 kPa. The mixture quality at the exit of both turbines is 96 percent. Determine the temperature at the inlet of each turbine and the cycle's thermal efficiency.
Answers
Answer:
no one liked the play changing active and passive voice
x − 3y − 8z = −10 2x + 5y + 6z = 13 3x + 2y − 2z = 3
Answers
Answer:
consistent; dependent; infinite
Explanation:
Subtract the first equation from the third equation.
3x + 2y − 2z = 3
− (x − 3y − 8z = −10)
2x + 5y + 6z = 13 Subtract.
Because the resulting equation is identical to the second equation, the system is consistent and dependent with infinitely many solutions.
A wheel tractor is operating in it is fourth gear range with full rated revolution per minute. Tractors speed is 7.00 miles per hour. Ambien air temperature is 60 Fahrenheit, and operating attitude is sea level. This tractor is towing a fill material loaded pneumatic trailer while climbing with 5 % slop. Rolling resistance is 55lb/ton. Tractor is single axle and it is operating weight is 74,946 lb. The loaded trailer weighs 55,000 lb. The weight distribution is for the combined tractor- trailer unit is 53% to the drive axle and 47% to the rear axle.
The manufacturer, for the environmental conditions as given above, rates the tractive effort of the new tractor at 330 rimpull HP. What percentage of this manufacturers rated rimpul HP actually develop?
Answers
Write torsion equation and explain the importance of each components.
Answers
1) The bar is straight and of uniform section
2) The material of the bar is has uniform properties.
3) The only loading is the applied torque which is applied normal to the axis of the bar.
4) The bar is stressed within its elastic limit.
Nomenclature
T = torque (Nm)
l = length of bar (m)
J = Polar moment of inertia.(Circular Sections) ( m^4)
J' = Polar moment of inertia.(Non circluar sections) ( m^4 )
K = Factor replacing J for non-circular sections.( m^4)
r = radial distance of point from center of section (m)
ro = radius of section OD (m)
τ = shear stress (N/m^2)
G Modulus of rigidity (N/m^2)
θ = angle of twist (radians)
What major financial flop led to the end of the Sega Dreamcast and ultimately caused Sega to stop making game consoles altogether?
1: The founder and CEO of Sega was found to be secretly skimming money off of the top of profits, leading to widespread distrust by the public and a sharp decline in sales until they ultimately had to shut down due to making no profit.
2: A small group of employees found a way to drain all of the Sega Corporation funding accounts and flee the country with all of the money, never to be heard from again.
3: A game called Shenmue, that cost more than $70 million to make, meant that everyone who owned a Dreamcast needed to buy two copies of the game just for Sega to make back the money they had spent to develop it-which didn't happen.
4: A game called Katamari Damacy that carried a virus that would infect any console that it was played on forced Sega to spend millions of dollars in refunds and bankrupted the company.
Answers
Answer:
The major financial flop that led to the end of the Sega Dreamcast and ultimately caused Sega to stop making game consoles altogether is:
3: A game called Shenmue, that cost more than $70 million to make, meant that everyone who owned a Dreamcast needed to buy two copies of the game just for Sega to make back the money they had spent to develop it-which didn't happen.
Explanation:
Shenmue, released on December 29, 1999, was created for Dreamcast by Suzuki. It was widely described as the most expensive video game ever produced. It had an estimated production and marketing cost of between US$47 and $70 million, according to the latest available data.
Which statement about the seal between the respirator and the wearer's face is true?
POSSIBLE ANSWERS:
Negative pressure respirators prevent ambient air from entering the mask.
Cosmetic surgery can be completed without a re-evaluation of respirator fit.
Positive pressure respirators tighten the face mask when the wearer inhales.
Facial hair can prevent a respirator from properly sealing to the wearer’s face.
Answers
A true statement about the seal between the respirator and the wearer's face is: D. facial hair can prevent a respirator from properly sealing to the wearer’s face.
What is a respirator?A respirator can be defined as a personal protective equipment that is typically worn over the face to protect the mouth and nose, while protecting the wearer from inhaling smoke, dust, or other toxic chemical substances.
In this context, a true statement about the seal between the respirator and the wearer's face is that facial hair has the ability to prevent a respirator from properly sealing to the wearer’s face.
Read more on protective equipment here: https://brainly.com/question/19131588
#SPJ1
___ simulate the behavior of a service and its actions can be verified.
Answers
Behavior simulation is a method that allows the verification of a service's actions.
Behavior simulation is a technique used to mimic and replicate the behavior of a service or system in a controlled environment. It involves creating a model or simulation that imitates the actions and responses of the actual service. By doing so, the behavior of the service can be observed, analyzed, and verified.
The simulation enables testing and validation of various aspects of the service, such as its functionality, performance, and reliability. It allows developers and stakeholders to understand how the service behaves under different conditions and scenarios. By simulating the behavior, potential issues or errors can be identified and addressed before the actual deployment of the service.
Moreover, behavior simulation can provide insights into the service's interactions with other components or systems, helping to ensure seamless integration and compatibility. It also facilitates the evaluation of the service's compliance with defined specifications, standards, and regulations.
Overall, behavior simulation is a valuable technique in the development and testing process, as it provides a controlled environment to analyze, validate, and verify the actions of a service, enhancing its quality, reliability, and performance.
Learn more about behavior simulation.
brainly.com/question/31161362
#SPJ11
Can some help me with this !!! Is 26 points!!
Answers
15,000,000 ohms because M=10^6
PLEASE HELP ASAP!!! Thanks
Answers
the open-ended polyvinyl chloride pipe has an inner diameter of 4 in. and thickness of 0.2 in. if it carries flowing water at 62 psi pressure, determine the state of stress in the walls of the pipe
Answers
There is no stress in the longitudinal direction since the pipe has no open ends.
What is longitudinal stress?
The tension that results from subjecting a pipe to internal pressure is known as longitudinal stress. A pipe's longitudinal stress acts in the direction of the pipe's length because it is parallel to the longitudinal axis of the pipe's centerline axis.
Tensile stress and compressive stress are two further subtypes of longitudinal stress. Tensile tension is the term for a type of stress that causes a body to grow longer.
Open ended pipe -longitudinal stress:
As we know if there are open ends there won't be any longitudinal stress
Hence, we can conclude that open pipes have no longitudinal stress
To know more about longitudinal stress, please follow the link below:
https://brainly.com/question/14330093
#SPJ4
which of the following is not a manufacturing process? group of answer choices job shop paint shop line flow continuous flow
Answers
Production line/ assembly line is not a manufacturing process. A factory assembly line that builds a product by transferring work from one station to the next until the product is complete.
A production line is a collection of coordinated procedures set up in a factory where parts are joined together to create finished goods or where raw materials are processed to create finished goods fit for consumption.
Usually, in order to make raw materials functional, such as metal ores, agricultural products like foodstuffs, or textile source plants like cotton and flax, a series of treatments is needed. The procedures for metal include crushing, smelting, and more refinement. For plants, the valuable material needs to be removed from the husks or other impurities before being processed for sale.
To know more about procedures click here:
https://brainly.com/question/18270087
#SPJ4
as the angle of the ramp is increased the force parallel increases /decreases / remains the same
Answers
As the angle of the ramp is increased, the force parallel increases. Hence, option (a) can be considered as the correct answer.
When the angle of a ramp is increased, the force parallel to the ramp, also known as the parallel component of the gravitational force, does increase. This is because the component of gravity acting parallel to the ramp increases with the angle. However, it's important to note that the total gravitational force acting on an object remains constant regardless of the angle of the ramp.As the angle of the ramp increases, the force required to push or pull an object up the ramp against gravity increases. This is due to the increase in the vertical component of the gravitational force, which opposes the motion up the ramp. The parallel force required to overcome this increased vertical force also increases.
To know more about, gravitational force, visit :
https://brainly.com/question/29190673
#SPJ11
The statements below refer to the design and operation of the power sub-system on a spacecraft. Select all those statements that are correct.
Answers
the battery and ODC input voltages, as well as the main parameters for the power source, fireworks, relays, anti-static resistances, etc. The statements below refer to the design and operation of the power sub-system on a spacecraft.
How do spaceship electric power systems work?Solar panels on these spacecraft convert solar energy into the electricity they require for propulsion. The electricity generated by the solar panels is used to recharge a battery within the spacecraft. These batteries can power the spaceship even as it is traveling away from the sun.
What make up a spacecraft's subsystems?The engine, temperature management, power and power distribution, attitude control, telemetry command and control, transmitters/antenna, computers/on-board processing/software, and structural components are only a few of the many subsystems that make up a spaceship bus.
To know more about spacecraft's subsystems visit:-
https://brainly.com/question/29610872
#SPJ1
Why is GMA welding called a semiautomatic process?
Answers
Gas Metal Arc (GMA) welding is called a semiautomatic process because it involves both manual and automatic operations.
In GMA welding, a continuous wire electrode is fed into the welding arc, which melts the wire and fuses it to the workpiece. The welding operator manually positions the welding torch and controls the speed and angle of the weld. However, the welding process is also partially automated because the wire feeding and shielding gas delivery systems are typically mechanized or automated.
The wire feeding system is designed to automatically feed the wire into the weld, which helps to ensure a consistent weld bead.
Learn more about GMA welding:https://brainly.com/question/19737912
#SPJ11
Who had launched the highest number of internet satellites as of March 2020?
Answers
Answer:
SpaceX
Explanation:
SpaceX successfully launches 60 more Starlink satellites as it continues towards 2020 service debut. SpaceX has launched another big batch of Starlink satellites, the low Earth orbit spacecraft that will provide connectivity for its globe-spanning high-bandwidth broadband internet network.
.Write a program that uses a void function void miles_to_km() to generate a kilometer
conversion table for all even kilometers from 2 miles to 62 miles. Use two decimal
places for kilometers.
Answers
Explanation:
rational
Step-by-step explanation:
The discriminant (d) of a quadratic equation ax^2 + bx + c = 0ax
2
+bx+c=0 is:
\boxed{\mathrm{d =} \ b^2 - 4ac}
d= b
2
−4ac
.
If:
• d > 0, then there are two real solutions
• d = 0, then there is a repeated real solution
• d < 0, then there is no real solution.
In this question, we are given the quadratic equation 3x^2 + 4x - 2 = 03x
2
+4x−2=0 . Therefore, the discriminant of the equation is:
b² - 4ac = (4)² - 4(3)(-2)
= 16 - (-24)rational
Step-by-step explanation:
The discriminant (d) of a quadratic equation ax^2 + bx + c = 0ax
2
+bx+c=0 is:
\boxed{\mathrm{d =} \ b^2 - 4ac}
d= b
2
−4ac
.
If:
• d > 0, then there are two real solutions
• d = 0, then there is a repeated real solution
• d < 0, then there is no real solution.
In this question, we are given the quadratic equation 3x^2 + 4x - 2 = 03x
2
+4x−2=0 . Therefore, the discriminant of the equation is:
b² - 4ac = (4)² - 4(3)(-2)
= 16 - (-24)
= 40
Since the discriminant, 40, is greater than zero, the quadratic equation has 2 rational solutions.
= 40
Since the discriminant, 40, is greater than zero, the quadratic equation has 2 rational solutions.
The * key is used for ____.
Answers
which handpiece is used by the dentist in every restorative procedure?
Answers
Answer:
high speed handpiece
Explanation:
The high-speed handpiece generates a significant amount of heat and friction as a result of the high number of revolutions per minute.
You are getting ready to transport troops in an M1152 configured with cargo cover and troops seats. Which of the following should you do before starting out?
Answers
Answer:
I believe it would be to lower the troop seats.
Explanation:
Which design activity is part of the design for manufacturability (DFM) methodology?
Aavold parts that are mirror Images
B. establish guidelines on the go
с. some asymmetrical parts are acceptable
D.
maximize utilization of setup time
Answers
Answer:
D would be correct because it maximizes it.
are there any companies that you can get a job at as an air craft engeer after university
Answers
Explanation:
most big airports. my father has the same degree and works for southwest airlines
prescription eye protection suitable for an electrician should always include
Answers
Answer:
If prescription lenses are required, they must be covered by protective goggles or the lenses and frames must be ANSI approved.
Explanation:
this includes side shields for angular protection. Goggles and safety glasses are primary protectors. Goggles fit around the area of the face near the eye. hope this helps you :)