The NGC of the Agency for Healthcare Research and Quality (AHRQ) and the Cochrane collaboration are examples of evidence based practice initiatives that:
a. conduct randomized controlled trials for translation into practice.
b. gather and interpret research findings and develop practice guidelines.
c. mine quasi-experimental and qualitative research findings for practice evidence.
d. survey practice experts for opinions on best-practices.
Answers
The NGC of the Agency for Healthcare Research and Quality (AHRQ) and the Cochrane Collaboration are both examples of evidence-based practice initiatives that gather and interpret research findings to develop practice guidelines. Option b is correct.
They rely on the highest quality evidence available, which often includes randomized controlled trials, but may also include other forms of research such as observational studies or systematic reviews. While they may consult with practice experts, their emphasis is on using the best available evidence to inform practice decisions.
These initiatives focus on systematically reviewing and appraising the quality of existing research and synthesizing the evidence to create guidelines that inform and improve clinical practice.
Learn more about Agency for Healthcare Research and Quality (AHRQ): https://brainly.com/question/17148066
#SPJ11
The NGC of the Agency for Healthcare Research and Quality (AHRQ) and the Cochrane Collaboration are examples of evidence-based practice initiatives that:
b. gather and interpret research findings and develop practice guidelines.
When conducting an EBP project, it is important to use a model to help guide your work. In the Johns Hopkins Health System, we use the Johns Hopkins Evidence-Based Practice (JHEBP) model. It is a three-phase approach referred to as the PET process: practice question, evidence, and translation. In the first phase, the team develops a practice question by identifying the patient population, interventions, and outcomes (PICO). In the second phase, a literature search is performed, and the evidence is appraised for strength and quality. In the third phase, the findings are synthesized to develop recommendations for practice.
The JHEBP model is accompanied by user-friendly tools. The tools walk you through each phase of the project. Johns Hopkins nurses can access the tools via our Inquiry Toolkit. The tools are available to individuals from other institutions via the Institute for Johns Hopkins Nursing (IJHN).
learn more about evidence-based practice here:
https://brainly.com/question/11056307
#SPJ11
Related Questions
Hard steering can be caused by
Answers
Answer:
Lack of fluid oil – lack of fluid oil in your vehicle, or a fluid leakage, can lead to heavy steering. If there is a lack of fluid oil, or a leak, this can reduce the pressure in the system, meaning the steering wheel does not receive enough supply of fluid to perform freely.
In 2009 an explosive eruption covered the island of Hunga Ha'apai in black volcanic ash. What type of succession is this?
Answers
Answer:
The type of succession is:
Primary succession
Explanation:
This is a type of succession that occurs after a volcanic eruption or earthquake; it involves the breakdown of rocks by lichens to create new, nutrient rich soils.
Primary succession is one of the two types of succession we have. It begins on rock formations, such as volcanoes or mountains, or in a place with no organisms or soil.
The term route of entry on an SDS refers to the way a _____ enters the body
Answers
Answer:
No matter what u post on a football page, some fatherless dude will either say "pessi" or "penaldo"
noooo plssschvwekjshdjkshdjkshdjksahdk
Answers
Answer:
chehdhfhfhd
Explanation:
fjrjshrhdhr
ACL access will be revoked in the future aws redshift
Answers
A security precaution that may be used to make sure that only authorized users can access the Redshift cluster is revoking ACL (Access Control List) access in AWS Redshift.
How to explain the informationIt should be noted that to prevent any potential security problems, it's always a good idea to evaluate and change the permissions given to users on a regular basis.
You should speak with the Redshift cluster owner or the administrator of your AWS account to learn the reasoning behind any potential revocation of your ACL access.
In any event, make sure you have a backup method of getting to the Redshift cluster. You can use IAM (Identity and Access Management) roles, which offer a more fine-grained level of access control, to request the AWS account administrator to grant you the necessary permissions.
Learn more about security on
https://brainly.com/question/25720881
#SPJ4
Scheduling can best be defined as the process used to determine:
Answers
Answer:
Overall project duration
Explanation:
Scheduling can best be defined as the process used to determine a overall project duration.
when choosing building-construction materials, what kinds of materials would you choose, all other things being equal? materials with a relatively small shear modulus materials with a relatively small bulk modulus materials with a relatively large bulk modulus any kinds, as long as the building is not too tall either materials with a large or a small bulk modulus
Answers
when choosing building-construction materials i will chose a materials with a relatively large bulk modulus.
A substance's bulk modulus serves as a gauge of its compressibility resistance. It is described as the proportion between an increase in pressure that is infinitesimally small and the resulting relative decrease in volume.Any substance that may be utilized in construction is considered a building material. It frequently consists of wood, steel, concrete, cement, aggregates, bricks, clay, metal, and much more. In the past, humans have used nothing but pure bricks, wood, or straw. Wood, cement, aggregates, metals, bricks, concrete, and clay are among the most fundamental types of building materials used in construction. When choosing materials, it's important to take into account a variety of elements, including manufacture, durability, environmental effect, and specialized features for particular applications.
Learn more about bulk modulus here:
https://brainly.com/question/14070556
#SPJ4
Consider a condenser in which steam at a specified temperature is condensed by rejecting heat to the cooling water. If the heat transfer rate in the condenser and the temperature rise of the cooling water is known, explain how the rate of condensation of the steam and the mass flow rate of the cooling water can be determined. Also, explain how the total thermal resistance R of this condenser can be evaluated in this case.
Answers
Answer:
Q = [ mCp ( ΔT) ] \(_{cooling water }\)
(ΔT)\(_{cooling water}\) and Q is given
\(m_{cooling water}\) = \(\frac{Q}{Cp[ T_{out} - T_{in} ] }\)
next the rate of condensation of the steam
Q = [ m\(h_{fg}\) ]\(_{steam}\)
\(m_{steam} = \frac{Q}{h_{fg} }\)
Total resistance of the condenser is
R = \(\frac{Q}{change in T_{cooling water } }\)
Explanation:
How will the rate of condensation of the steam and the mass flow rate of the cooling water can be determined
Q = [ mCp ( ΔT) ] \(_{cooling water }\)
(ΔT)\(_{cooling water}\) and Q is given
\(m_{cooling water}\) = \(\frac{Q}{Cp[ T_{out} - T_{in} ] }\)
next the rate of condensation of the steam
Q = [ m\(h_{fg}\) ]\(_{steam}\)
\(m_{steam} = \frac{Q}{h_{fg} }\)
Total resistance of the condenser is
R = \(\frac{Q}{change in T_{cooling water } }\)
A polluted stream contaminated with agricultural run-off discharges into a lake. The lake contains 10 x 106 m² of water. The stream flows at 120 ft / min and contains 0.40 mg/L of phosphorous (P) and 0.01 ug / L of a regulated pesticide. A larger river flows into the lake with a flow rate of 24,000 ft/min containing 0.001 mg/L of P and no detectable levels of the pesticide. Assume phosphorous is a conserved pollutant and the herbicide as non-conserved with a decay coefficient k = 3.23 x 10-4 mindue to chemical destruction by sunlight in the lake. A river flows out of the lake at the opposite end. a. Assuming the lake is well mixed, calculate the steady state phosphorous concentration in the lake in units of ug / Land ppb (parts per billion) b. Assuming the lake is well mixed, calculate the steady state pesticide concentration in the lake in units of ug/L and ppt (parts per trillion). c. What is the residence time of water in the lake?
Answers
This type of calculation is called a mass balance calculation. Mass balance calculations are used to determine the steady-state concentrations of pollutants in a system as well as to calculate the residence time of water.
What is the residence time of water in the lake?The steady state phosphorous concentration in the lake in units of ug/L is 0.0032 ug/L and in parts per billion is 3.2 ppb. The steady state pesticide concentration in the lake in units of ug/L is 0.0011 ug/L and in parts per trillion is 11 ppt.The residence time of water in the lake is 4.5 hours.The steady state phosphorus concentration in the lake in units of ug/L is 0.012, and in parts per billion it is 12 ppb.The steady state pesticide concentration in the lake in units of ug/L is 0.0004, and in parts per trillion it is 0.4 ppt.The residence time of water in the lake is calculated by dividing the volume of the lake (10 x 106 m²) by the total flow rate into and out of the lake (24,000 ft/min + 120 ft/min). This gives a residence time of 4.17 hours.This means that, on average, it takes 4.17 hours for water to move through the lake and out the other end. The residence time is important in determining the amount of time pollutants will remain in the lake, as they will take the same amount of time to be flushed out.This is also important in determining how much time pollutants will have to be degraded and removed before exiting the lake.To learn more about Mass balance calculations refer to:
https://brainly.com/question/28232886
#SPJ4
The average amount of time that water (or any dissolved substance) spends in a certain lake is expressed by a calculated number known as lake retention time, also known as the residency time of lake water, water age, or flushing time.
What two elements influence the length of time a lake is submerged?The entire amount of the reservoir (the stock; typically stated as a mass or volume) and either the total rate of inflow (expressed in units of mass or volume per time) or outflow (expressed in units of mass or volume per time) can be used to calculate the residence time for water in a reservoir.
The amount of time it takes for all the water in a lake to completely replenish itself is known as the retention time. The retention times range amongst the Great Lakes. The retention duration for Lake Superior is far longer than the others, at 194 years as opposed to Lake Huron's 75 years.
To learn more about lake is submerged refer to:
https://brainly.com/question/30028517
#SPJ4
Most technicians install rebuilt or new power steering pumps rather than overhauling the defective unit in the shop. True or False?
Answers
Answer:
Most technicians install rebuilt or new power steering pumps rather than overhauling the defective unit in the shop.
True
Explanation:
It has been established that most technicians, instead of overhauling the defective power steering pumps, prefer to install rebuilt or revamped pumps or even new pumps when they could have overhauled the unit themselves. Some are afraid that leakage could occur again. They are not confident enough to do the overhauling in-house or some claim that they do not have the time and other tools to carry out the overhauling. Acknowledgedly, overhauling a power steering pump is not a job for the novice. They require experienced and skilled hands to do the hard work.
One situation that can make a measurement with a laser inaccurate is measuring to a: ________
Answers
One situation that can make a measurement with a laser inaccurate is measuring to a heavy reflective surface
What is reflective surface?Reflective surfaces or ground-primarily based totally albedo modification (GBAM) is a sun radiation control technique of improving the Earth's albedo (the cappotential to mirror the visible, infrared and ultraviolet wavelengths of the sun, lowering warmth switch to the floor). The IPCC defined this technique as "whitening roofs, adjustments in land use control (e.g., no-until farming), alternate of albedo at a bigger scale (masking glaciers or deserts with reflective sheeting and adjustments in ocean albedo)."
The maximum famous kind of reflective floor is a kind of roof referred to as the "cool roof". While cool roofs are commonly related to white roofs, they arrive in a lot of hues and substances and are to be had for each industrial and home buildings.
Learn more about reflective surface https://brainly.com/question/1191238
#SPJ4
A thermocouple gives an output of 0.2 mV for each degree change in temperature. What will be the word length required when its output passes through an analogue-to-digital converter if temperatures from 0 to 1000 oC are to be measured with a resolution of 0.5 oC?
Answers
9514 1404 393
Answer:
11 bit
Explanation:
The number of resolution units required is ...
(1000 °C -0 °C)/(0.5 °C) = 2000
log2(2000) = 10.97, so an unsigned word length of 11 bits is the minimum required.
An intelligence signal is amplified by a 65% efficient amplifier before being combined with a 250W carrier to generate an AM signal. If it is desired to operate at 50% modulation, what must be the dc input power to the final intelligence signal amplifier
Answers
Answer:
"192.3 watt" is the right answer.
Explanation:
Given:
Efficient amplifier,
= 65%
or,
= 0.65
Power,
\(P_c=250 \ watt\)
As we know,
⇒ \(P_t=P_c(1+\frac{\mu^2}{2} )\)
By putting the values, we get
\(=P_c(1+\frac{1}{2} )\)
\(=1.5 \ P_c\)
Now,
⇒ \(P_i=(P_t-P_c)\)
\(=1.5 \ P_c-P_c\)
\(=\frac{P_c}{2}\)
DC input (0.65) will be equal to "\((\frac{P_c}{2} )\)".
hence,
The DC input power will be:
= \(\frac{250}{2}\times \frac{1}{0.65}\)
= \(\frac{125}{0.65}\)
= \(192.3 \ watt\)
Axial loads are applied with rigid bearing plates to the solid cylindrical rods shown.
The diameter of the aluminum rod (1) is 2.00 in. the diameter of the brass rod (2) is 1.50 in. and the diameter of steel rod (3) is 3.00 in.
Determine the axial stress is each of the three rods.
Answers
Answer:
To find the stress you need to know the applied load. Without that information, it is not possible to determine the axial stress in each of the three rods.
Explanation:
To determine the axial stress in each of the three rods, you would need to know the applied load and the cross-sectional area of each rod. The formula for axial stress is:
Stress (σ) = Load (F) / Area (A)
The area of a rod can be determined using the formula:
Area = π * (diameter/2)^2
Where diameter is the diameter of the rod in inches.
So,
For rod 1(aluminum rod)
Area = π * (2.00/2)^2 = 3.14 in^2
For rod 2(brass rod)
Area = π * (1.50/2)^2 = 1.77 in^2
For rod 3(steel rod)
Area = π * (3.00/2)^2 = 7.07 in^2
To find the stress you need to know the applied load. Without that information, it is not possible to determine the axial stress in each of the three rods.
6. explain why injection molding is capable of producing parts with complex shapes and fine detail. can it be used for ceramics and metals?
Answers
When injection molding is performed a viscous liquid can flow into small and intricate cavities under pressure and the cool and solidify in the desired shape to fill any potential cracks and spaces.
What is injection molding?
The process is especially good for fine detailing and fixing small imperfections because of the attractive features of thermoplastics. The injection molds are subjected to a lot of the plastic within the molds is pressed harder against the mold than any other process.
It is possible to add a lot of details to the design of the part because of the high pressure.
It is able to be used for ceramics and metals.
To Know More About injection molding, Check Out
https://brainly.com/question/22936549
#SPJ4
What is computer programming
Answers
Answer:
Computer programming is where you learn and see how computers work. People do this for a living as a job, if you get really good at it you will soon be able to program/ create a computer.
Explanation:
Hope dis helps! :)
8. Find the volume of the figure shown below: * V=L x W x H 7 cm 2 cm 2 cm
Answers
1. Consider a solid cube of dimensions 1ft x 1ft x 1ft (=0.305m x 0.305m x 0.305m). Its top surface is 10
ft (=3.05 m) below the surface of the water. The density of water is pf=1000 kg/m3.
Consider two cases:
a) The cube is made of cork (pB=160.2 kg/m3)
b) The cube is made of steel (pB=7849 kg/m3)
In what direction does the body tend to move?
Answers
Answer:
a) up
b) down
Explanation:
When the cube is less dense than water, it will tend to float (move upward). When it is more dense, it will sink (move downward).
a) 160.2 kg/m^3 < 1000 kg/m^3. The cube will move up.
__
b) 7849 kg/m^3 > 1000 kg/m^3. The cube will move down.
Describe a project in which you would use a pleater, ruffling foot, or gathering foot. Explain each of these tools and choose the one that might be necessary for the project you are describing.(FASHION DESIGN)
Answers
A project that requires using a pleater, a ruffling foot, or a gathering foot is the creation of a dress.
A pleater, a ruffling foot, and a gathering foot are all accessories for sewing machines or machines themselves that help fashion designers to give the fabric a different shape or texture, and therefore create unique pieces.
Pleater: This tool includes multiple needles that go through the fabric to create multiple pleatsRuffling foot: This is usually an accessory for sewing machines to create rufflesGathering foot: This tool is used to create gathers in fabric, these differ from ruffles because they are smaller and more subtle than rufflesAll of the tools can be used in the creation of a dress, for example, a pleater can be used in the top section of the dress to give it a nice texture and make it different from the skirt. In the same way, others such as the ruffling foot or the gathering foot can be used in the sleeves of the dress.
Learn more in: https://brainly.com/question/24702927
How do u walk dogs and they have to park in the car
Answers
Answer: walk dog on leash for one and two you csnt park in a car you park the car and walk the dog on a leash
Explanation: did you phrase the question wrong?
Given resistance 30ohms Inductance 200mH is connected to a 230v,50hZ supply. Impedance 69.6ohms Calculate current consumed?
Answers
Answer:
the current consumed is 3.3 A
Explanation:
Given;
resistance, R = 30 ohms
inductance, L = 200 mH
Voltage supply, V = 230 V
frequency of the coil, f = 50 Hz
impedance, Z = 69.6 Ohms
The current consumed is calculated as;
\(I = \frac{V}{Z} \\\\I = \frac{230}{69.6} \\\\I = 3.3 \ A\)
Therefore, the current consumed is 3.3 A
what is the partial-fraction expansion of the rational function f(s)=2s2 21s 61(s 4)3
Answers
The partial-fraction expansion of the rational function f(s), we first factor the denominator as follows:
(s + 4)^3
Now we can write:
f(s) = A/(s + 4) + B/(s + 4)^2 + C/(s + 4)^3
where A, B, and C are constants that we need to determine. To do this, we can multiply both sides of this equation by the denominator and then solve for A, B, and C. This gives us the following system of equations:
2s^2 + 21s - 61 = A(s + 4)^2 + B(s + 4) + C
Substituting s = -4 gives us:
-122 = 16A
So A = -122/16 = -61/8.
Now we can substitute s = 0 and s = -1 into the above equation to get two more equations for B and C:
-61 = 16B + 4C
-47 = 64B + 16C
Solving these equations gives us:
B = 121/32
C = -255/128
Therefore, the partial-fraction expansion of f(s) is:
f(s) = (-61/8)/(s + 4) + (121/32)/(s + 4)^2 - (255/128)/(s + 4)^3
Learn more about rational here:
https://brainly.com/question/1310146
#SPJ11
might give brainliest
Complete the following sentence.
_______ is a communication system that is composed of images that represent words.
Answers
Answer:
Blissymbols
Explanation:
Blissymbols is a constructed language with hundreds of basic symbols that represent words.
Answer:
Blissymbols
Explanation:
Consider the code block below. What is the value of total amount when this method is called twice, the first time using addtotal (5) and then using addTotal (-3)? public static int addTotal (int itemCost) { int total = 0; total += itemCost; return total; } -3 5 8 2 An error occurs
Answers
The value of total amount when this method is called twice, the first time using addtotal (5) and then using addTotal (-3) is -3
The given code block below,
public static int addTotal (int itemCost) { int total = 0; total += itemCost; return total; } represents a method that takes an integer value called itemCost and returns an integer value called total. The integer total is set to 0 initially and the method then adds the value of the argument passed to itemCost to the total and then returns the value of total. To find out the value of total amount when this method is called twice, the first time using addtotal(5) and then using addTotal(-3), the following steps are to be followed:
Step 1: Initially, the value of the variable total is set to 0. So, the initial value of the total amount is 0.
Step 2: When the method is called for the first time using addtotal(5), then the value of the itemCost is 5 and the value of total is also 5 as we have already initialized it to 0 and added the value of the itemCost i.e. 5. Therefore, the total amount is 5.
Step 3: When the method is called for the second time using addTotal(-3), then the value of the itemCost is -3 and the value of total is also -3 as we have already initialized it to 0 and added the value of the itemCost i.e. -3.
Therefore, the total amount is -3. Thus, the value of the total amount when this method is called twice, the first time using addtotal(5) and then using addTotal(-3) is -3. Hence, the correct option is -3.
Learn more about method:
https://brainly.com/question/14560322
#SPJ11
How to interpret ASTM color for petroleum products DSASTM ,L 7.5 ASTM color. , Dil ASTM color
Answers
ASTM color is a standard method for evaluating the color of petroleum products.
What does the DSASTM scale measure?The DSASTM scale measures the darkness of the sample, with higher numbers indicating a darker color. The L 7.5 ASTM color scale measures the yellowness or redness of the sample, with positive numbers representing more yellow and negative numbers indicating more red.
Dil ASTM color refers to the color of a diluted sample, typically achieved by mixing the product with a specified solvent. These color measurements provide a quantitative assessment of the visual appearance of petroleum products, aiding in quality control and monitoring potential contamination or degradation.
Read more about petroleum products here:
https://brainly.com/question/908225
#SPJ1
Key to the success of grid computing is a(n) _____ that acts as a grid leader and traffic monitor.
Answers
Key to the success of grid computing is a(n) central server that acts as a grid leader and traffic monitor.
What is grid computing?Grid computing refers to the use of widely dispersed computer resources. A computer grid is analogous to a distributed system that contains multiple files and non-interactive tasks. Grid computers, as opposed to traditional high-performance computing systems such as cluster computing, have each node configured to run a distinct job or application. Furthermore, grid computers are typically more diverse and geographically distributed than cluster computers (and hence not physically connected). Although a single grid may be dedicated to a specific application, grids are frequently used for a variety of purposes. Grids are frequently built using software libraries for general-purpose grid middleware. Grid sizes are available in a variety of sizes.To learn more about Grid computing, refer to:
https://brainly.com/question/16326427
#SPJ4
5. (20 points) Identify and resolve (via forwarding) all the data hazards in the MIPS pipeline for the following sequence of MIPS instructions. Insert pipeline bubbles as necessary if forwarding cannot completely solve the data hazards. You may use multi-cycle pipeline representation to show the forwarding and bubbles. sub $4, $1, $3 sw $4, 0($2) lw $1, 0($2) add $1, $3, $4
Answers
Answer:
a
Explanation:
What does efficiency measure?
Answers
Answer:
Efficiency is defined as any performance that uses the fewest number of inputs to produce the greatest number of outputs. Simply put, you're efficient if you get more out of less.
Explanation:
what is the first step in constructing an inscribed square?
Answers
The first step in constructing an inscribed square is to draw a circle. The circle will serve as the circumcircle for the square.
The center of the circle can be any point, but it's commonly chosen as the starting point for construction.
To construct the circle, you can use a compass.
Place the point of the compass at the chosen center and adjust the compass width to a radius that will be larger than the desired side length of the inscribed square.
Then, with the compass still set, draw a complete circle by rotating the compass around the center point.
Ensure that the circle is large enough to accommodate the square inside it.
Once the circle is drawn, it provides the framework for constructing the inscribed square.
The subsequent steps involve using geometric construction techniques to create the square within the circle.
To learn more on Circles click:
https://brainly.com/question/11833983
#SPJ4
Calculate the percentage of recyclables in high socioeconomic localities.
Answers
Answer:
The percentage of recycling in high socioeconomic localities is 11.02%.
Explanation:
Since in high socioeconomic localities, 10% of paper is recycled, 12% of plastic, 1.7% of fabrics, 1.2% of rubbers, 0.9% of metals, 3.5% of glass, 33% of food wastes, 35% soil and 1.9% miscellaneous, to determine the average recycling percentage the following calculation must be performed:
(10 + 12 + 1.7 + 1.2 + 0.9 + 3.5 + 33 + 35 + 1.9) / 9 = X
99.2 / 9 = X
11.02 = X
Therefore, the percentage of recycling in high socioeconomic localities is 11.02%.