The curved path taken by the project object

Answer:

I thick it's ccc not for sure

A planet with the same mass but different sizes and temperatures that is most likely to retain a thick atmosphere would be one with a larger size and lower temperature.

This is because a larger size indicates a stronger gravitational pull, which helps retain atmospheric gases. Additionally, lower temperatures prevent gas particles from moving too fast and escaping the planet's gravitational pull.

Firstly, a larger planet has a stronger gravitational pull, which allows it to hold on to its atmosphere more effectively.

This is because the gravitational pull of a planet is proportional to its mass and radius. Therefore, a planet with a larger size will have a stronger gravitational pull, which can hold onto atmospheric gases better.

Secondly, lower temperatures prevent atmospheric gases from escaping the planet's gravitational pull. When gas particles have high temperatures, they move at a faster speed, which increases their kinetic energy.

This means that they are more likely to overcome the planet's gravitational pull and escape into space. On the other hand, if the temperature is low, gas particles move slower, which reduces their kinetic energy and makes them less likely to escape.

To learn more about space, refer below:

https://brainly.com/question/16588531

#SPJ11

The molar mass of a compound can be found by adding the molar masses of all of the atoms in the compound.

The molar mass of an atom can be found on the periodic table by looking at the atomic mass listed for that element.

For example, to find the molar mass of water (H2O), we would add the molar masses of two hydrogen atoms (2 x 1.01 g/mol) and one oxygen atom (16.00 g/mol) to get a total molar mass of 18.02 g/mol.

Another way is by finding the molecular formula of the compound, it can be done by analyzing the compound's chemical and physical properties and then using the mass spectrometer to determine the molecular weight.

In conclusion, the molar mass of a compound can be found by adding the molar masses of the atoms in the compound using the atomic masses listed on the periodic table, or by determining the molecular formula of the compound and using a mass spectrometer to find the molecular weight.

Learn more about molar mass at

https://brainly.com/question/12127540

#SPJ4

Answer:

100,000 to 200,000 years to cross the milky way.

Explanation:

If the rods in your eye were selectively damaged by the supervillain, you would experience reduced vision in dim light and an inability to see color. This is because rods are responsible for vision in low light and do not detect color, while cones are responsible for color vision and work best in bright light.

If the cones in your eye were damaged instead, you would experience reduced color vision and an inability to see clearly in bright light. This is because cones are responsible for color vision and work best in bright light, while rods are responsible for vision in low light and do not detect color.

It really depends on the individual and their needs. If you are a person who spends a lot of time in low light, you may want to keep the rods intact so that you can still see in dim light. On the other hand, if you are someone who needs to distinguish between colors, you may want to keep the cones intact so that you can still see colors.

Yes, this choice would change if you were a nonhuman animal, since different species have different levels of light vision and color vision. For example, some animals, such as cats, have sharper vision in low light, while others, such as birds, have sharper color vision. Depending on the species and the needs of the animal, they may want to keep either rods or cones intact.

Answer:

Vectors have both magnitude and direction

Explanation:

Vectors show how strong the force in because the bigger the arrow, the stronger the force.  Also, it obviously shows direction because its an arrow.

Vectors have magnitude and direction while scalars have only magnitude. Vectors are shown using an arrow above the symbol of the quantity and are often printed in bold face.

In Physics, we generally recognize two categories of quantities; vector quantities and scalar quantities.

Vector quantities have both magnitude and direction. It is normal to print vectors in bold face, with an arrow written above the symbol of the quantity. The arrow points in the direction of the vector.

The following are true regarding vectors;

Learn more: https://brainly.com/question/13322477

Answer:

Ionic and covalent bonding produce compounds, while hydrogen bonding and Van der Waals forces join separate molecules together.

Ur welcome:)

Answer:

C) lonic and covalent bonding produce compounds, while hydrogen bonding and Van der Waals forces join separate molecules together.

Explanation:

Given what we know, we can confirm that doubling the distance between you and a source of radiation decreases your exposure by 75%.

Therefore, given that the radiation is proportional to the square of the distance, instead of being of a more direct relation, we can confirm that when doubling the distance between yourself and the source of the radiation, you can reduce its effects by 3/4 or 75%.

To learn more about radiation visit:

https://brainly.com/question/9815840?referrer=searchResults

The work done by the water at the constant pressure is \(-4.52 \times 10^6 \ J\).

The heat required to boil the water is calculated as follows;

\(Q = mL_v\\\\\)

where;

\(Q = 2 \times 22.6 \times 10^5\\\\Q = 4.52 \times 10^6 \ J\)

The work done by the water at the constant pressure is equal to the heat gained by the water.

\(W = - \Delta H\\\\W = -4.52 \times 10^6 \ J\).

Learn more about first law of thermodynamics here: https://brainly.com/question/2965070

(a) The screen  is 3.20m from the split.

(b) The closest minima for green, distance Δy = 0.45 cm.

When a wave hits a barrier or opening, numerous events are referred to as diffraction. It is described as the interference or bending of waves via an aperture or around the corners of an obstruction into the area that forms the geometric shadow of the obstruction or aperture.

(a)Equation of minima = sinθ  = mλ/α

Given, m = 3, λ = 6.33X10⁻⁷, α = 0.00015

Putting the values in formula to get θ.

  θ = sin⁻¹ ( \(\frac{3 X 6.33X10^{-7} }{0.00015}\) ) = 0.01266 rad

triangle need to be drawn to find relationship between θ, y$ and L

tan(θ) = y/L  where; y = 4.05 cm

L = y/tan(θ) = 3.20

Hence, the screen is 3.20m from the split.

(b) Find the closest minima for green

minima equation is sinθ  = mλ/α where, m = 4 (minima with smallest distance)

sinθ  = 4λ/α

θ = sin⁻¹ (\(\frac{4X6.33X10^{-7} }{0.00015}\)) = 0.01688 rad

Calculate L using

tanθ = y/L

  L = 4.5 cm

From equation subtract y₃ from y:

                 4.50 cm - 4.05 cm = 0.45 cm

Hence, distance Δy = 0.45 cm.

Learn more about the Diffraction with the help of the given link:

https://brainly.com/question/12290582

#SPJ4

I understand that the question you are looking for is "Two lasers, one red (with wavelength 633.0 nm) and the other green (with wavelength 532.0 nm), are mounted behind a 0.150-mm slit. On the ot

Question

Two lasers, one red (with wavelength 633.0 nm) and the other green (with wavelength 532.0 nm), are mounted behind a 0.150-mm slit. On the other side of the slit is a white screen. When the red laser is turned on, it creates a diffraction pattern on the screen.

a. The distance y3,red from the center of the pattern to the location of the third diffraction minimum of the red laser is 4.05 cm. How far L is the screen from the slit? Express this distance L in meters to three significant figures.

b. With both lasers turned on, the screen shows two overlapping diffraction patterns. The central maxima of the two patterns are at the same position. What is the distance Δy between the third minimum in the diffraction pattern of the red laser (from Part A) and the nearest minimum in the diffraction pattern of the green laser?

The labels A and B in the triangle's supplied picture stand for the transitions from a gas to a liquid and a gas to a solid, respectively.

Arrow A, which descends one side of the triangle from the top labelled "gas," symbolises condensation, the transformation of a gas into a liquid.

When a gas loses energy and changes into a liquid state, condensation takes place.

The transition from a gas to a solid is shown by arrow B, which also descends from the top and is labelled "gas" but is located on a different side of the triangle. Deposition is the term for this alteration. When a gas loses energy, it decomposes into a solid without changing to a liquid state, which is known as deposition.

Arrow C travels horizontally from the point designated "liquid" on the bottom of the triangle to the place designated "solid." This illustrates freezing, the transition from a liquid to a solid state. When a liquid loses energy, it freezes and changes from a liquid state to a solid state.

For more such question on condensation

https://brainly.com/question/29825431

#SPJ11

The maximal static friction force (F) between surfaces in contact prior to motion starting is divided by the normal force (N) to determine the coefficient of static friction. Solving yields a value of 1.08 m/s2.

The maximal static friction force (F) between surfaces in contact prior to motion starting is divided by the normal force (N) to determine the coefficient of static friction.

Static friction's highest value is F s = _s mg.

where _s is the static friction coefficient

50kg is the box's weight in meters.

Gravitational acceleration is equal to 9.81 m/s2.

F s = 0.5×50×9.81 =245 N

The object must be in motion because the applied force exceeds the static friction's maximum value, F s.

As a result, kinetic friction rather than static friction must be considered.

by the equilibrium state

ma = F k m g

where F = 250 N, k = kinetic friction coefficient = 0.4, and m = 50 Kg

a = box's acceleration

50a = 250-0.4×50×9.81

Solving yields a value of 1.08 m/s2.

To learn more about coefficient of static friction refer

https://brainly.com/question/22438157

#SPJ1

A promising evidence of a habitat that might support life on the planet Mars is water.

There is evidence supporting the existence of liquid water on Mars from numerous sources. The finding of repeated black streaks on Martian slopes and the presence of hydrated minerals suggest the potential of seasonal or location-specific briny water flows. A necessary component of life as known is liquid water.

Additionally, Mars possesses underground ecosystems that could provide defence against radiation and severe surface conditions. Researchers have found evidence of ancient underground hydrothermal systems as well as beneath ice. These settings might offer consistent conditions for the development of microbial life.  Methane gas has been found in the Martian atmosphere, along with variations over time, and this has led to questions regarding its origin. Both geological and biological processes can result in the production of methane.

Read more about Mars on:

https://brainly.com/question/28224926

#SPJ4

The wavelength of the water wave having a amplitude of 1.2 meters every 0.4 seconds is 1.8 m .

Wavelength is the total distance traveled by a wave in one cycle.

To calculate the wavelength of the wave, we use the formula connecting

speed, wavelength, and Period.

Formula:

Where:

Make λ the subject of the equation

From the question,

Given:

Substitute these values into equation 2

Hence, The wavelength of the water wave having a amplitude of 1.2 meters every 0.4 seconds is 1.8 m .

Learn more about wavelength here: https://brainly.com/question/10728818

#SPJ1

Based on the given information, the most appropriate classification for the state of the volcano would be "Active-Dormant."

The volcano's history of generating multiple lava flows over the past 10,000 years indicates that it has been active in the relatively recent past. The presence of lava flows that have spread over large areas suggests ongoing volcanic activity, although not necessarily in the immediate present.

Additionally, the mention of very little tephra (volcanic ash and fragments) indicates that the volcano is not currently experiencing explosive eruptions. Instead, it has been primarily characterized by effusive eruptions that produce lava flows.

The fact that people in the nearby town remember the last eruption, which caused some forest fires, further supports the classification of the volcano as active-dormant. While the volcano may not be actively erupting at the moment, the memory of the recent eruption and the potential for future volcanic activity suggests that it is still in a state of activity, albeit in a relatively dormant phase.

To know more about tephra, visit:
https://brainly.com/question/12549531

#SPJ11

The persοn is mοving at a speed οf 55 miles per hοur in the Sοuth directiοn when the persοn is 50 miles West and 70 miles Sοuth οf the car, and the distance between them is increasing at a rate οf 55 miles per hοur.

Tο determine the speed at which the persοn is mοving, we can use the cοncept οf relative velοcity.

Let's cοnsider the hοrizοntal and vertical cοmpοnents separately:

Hοrizοntal Cοmpοnent:

The persοn is walking due East, which is perpendicular tο the Nοrth directiοn οf the car. Therefοre, the hοrizοntal cοmpοnent οf the persοn's velοcity dοes nοt affect the speed at which the persοn is mοving away frοm the car.

Vertical Cοmpοnent:

The persοn is 70 miles Sοuth οf the car, and the distance between them is increasing at a rate οf 55 miles per hοur. This indicates that the persοn's vertical pοsitiοn is changing with time. Since the persοn is mοving in the Sοuth directiοn and the distance is increasing, the persοn's speed can be determined by the rate οf change οf the vertical distance.

Given that the distance is increasing at a rate οf 55 miles per hοur, the persοn's speed in the Sοuth directiοn is 55 miles per hοur.

Therefοre, the persοn is mοving at a speed οf 55 miles per hοur in the Sοuth directiοn when the persοn is 50 miles West and 70 miles Sοuth οf the car, and the distance between them is increasing at a rate οf 55 miles per hοur.

Learn more about speed

https://brainly.com/question/17661499

#SPJ4

Answer: when you increase or decrease your speed.

Explanation:

Moving a skate at rest, you need to apply force in order to cause acceleration.

F = ma Where

F = force applied

m = mass of the skate

a = acceleration

The initial velocity u will be equal to zero and the skate will acceleration to a certain velocity.

as you skate down your neighborhood sidewalk, you will accelerate when you increase your speed. Because

Acceleration is the rate of change of velocity. That is,

Acceleration = change in velocity/ time.

And also, you will decelerate when you reduce the speed or velocity down your neighborhood sidewalk.

Answer:

7

Explanation:

Cl is halogen needed only one electron to fullfil

its orbit.

hope it will help you,pls follow.

Answer:

13 N

Explanation:

From the question,

If two forces act at right angle to each other, Their result force can be calculated using Pythagoras theorem.

R'² = R₁²+R₂²....................... Equation 1

Where R' = Resultant force, R₁ = First force, R₂ = Second force.

Given: R₁ = 12 N, R₂ = 5 N

Substitute these values into equation 1

R'² = 12²+5²

R'² = 144+25

R'² = 169

R' = \(\sqrt{169}\)

R' = 13 N.

Hence the resultant force is 13 N

Answer:

In terms of the light spectrum, blue is a primary color, which means that it is one of the base colors that exist in the universe and it cannot be created by combining different colors together. The primary pigment colors are cyan, magenta, and yellow. Cyan absorbs red, yellow absorbs blue, and magenta absorbs green.

Explanation:

Hope this helped Mark BRAINLEST!!!

Answer:

50 kmph

Explanation:

300 / 6 = 50

In the actual world, there are five primary types of interactions between light and matter. These are emission, scattering, reflection, absorption, and transmission.

Maxwell's equations, which regard the solid as a continuum and result in its optical characteristics as a measure of the frequency of the electromagnetic energy: the complex dielectric constant, are used to explain the interaction of light with solids.

As light enters a material, transmission happens. As light moves across a medium, it may do so without being distorted or dispersed by the medium. When light transmits its energy to matter instead of being reflected nor transmitted by it, this is known as absorption of light.

To know more about Interaction of light visit:

https://brainly.com/question/28457917

#SPJ4

On 110 V dc, a 25-W soldering iron operates. R=484 denotes its resistance.

The Greek letter omega stands in for the ohm, a unit of resistance measurement. Georg Simon Ohm (1784–1854), a German physicist who investigated the connection between voltage, current, and resistance, is the name given to the unit of resistance.

We know that

V = P/I

Ohm's law, where P stands for power, V for external voltage, and I for internal current.

I = V/R

V = P(VR)

P=V²/R

The power is

P =25W

The potential being provided is

V = 110V

According to Ohm's law:

P = V²/R

R = V²/P

figuring out the resistance R's value as follows:

R = (110V)²/25W

R=484Ω

To know more about resistance visit:-

https://brainly.com/question/19582164

#SPJ1

An observatory records gamma rays and radio waves from the same galaxy. The best claim that indicates the signal with a longer wavelength and predicts the length of time it takes for each type of signal to get to Earth is:
Longer Wavelength: Radio waves

Time Taken to Get to Earth: The waves take the same amount of time.
Radio waves have longer wavelengths than gamma rays, as they fall at opposite ends of the electromagnetic spectrum. However, both signals travel at the speed of light, which means they will take the same amount of time to reach Earth from the galaxy. Since they are emitted from the same source, the time taken for both types of waves to arrive at the observatory will be equal.

learn more about gamma rays here

https://brainly.com/question/23281551

#SPJ11

The speed with which the particles enter the cyclotron is given by:

v = sqrt(2qV / mr).

In a cyclotron, the magnetic field B and the electric field E are perpendicular to each other and to the direction of motion of the particles. The magnetic field causes the particles to move in a circular path, while the electric field accelerates the particles between the two Dees.

The frequency of the electric field is adjusted so that it matches the frequency of the circular motion, causing the particles to gain energy with each pass through the Dees. This leads to an increase in the speed of the particles, which can be calculated using the following equation:

mv^2 / r = qvB

where m is the mass of the particle, v is its speed, r is the radius of the circular path, q is the charge of the particle, and B is the magnetic field.

The radius of the circular path can be expressed as:

r = mv / (qB)

Substituting this expression for r into the first equation, we get:

mv^2 / (mv / (qB)) = qvB

Simplifying and solving for v, we get:

v = sqrt(2qV / mr)

where V is the potential difference applied to accelerate the particles.

Therefore, the speed with which the particles enter the cyclotron is given by:

v = sqrt(2qV / mr)

Note that the speed of the particles will continue to increase as they pass through the Dees, until relativistic effects become significant. At that point, the frequency of the electric field must be adjusted in order to maintain resonance and continue accelerating the particles.

Visit to know more about Speed:-

brainly.com/question/13943409

#SPJ11

Answer:

6,400

Explanation:

i made sure  the other person was right and i got the same answer

Wavelength change with velocity change. Since water is a much denser medium than air, the speed of waves in water increases, and so does the wavelength.

Sound waves travel faster in denser materials because adjacent particles collide more easily. Take water for example. A bottle of water has about 800 times more particles than the same bottle filled with air. Hence, sound waves propagate much faster in water than in air.

When sound travels from air to water, the frequency does not change because it is directly proportional to the source. Velocity varies because it is directly proportional to the medium, and wavelength varies because it is directly proportional to velocity and f is constant.

To know more about sound waves, visit:

https://brainly.com/question/1393179

#SPJ4