Print numbers 0, 1, 2, ..., userNum as shown, with each number indented by that number of spaces. For each printed line, print the leading spaces, then the number, and then a newline. Hint: Use i and j as loop variables (initialize i and j explicitly). Note: Avoid any other spaces like spaces after the printed number. Ex: userNum = 3 prints:
0
1
2
3
(each number is one tab over from the last but formatting on Brainly wont allow that)


#include


int main(void) {

int userNum;

int i;

int j;


scanf("%d", &userNum);


/* Your solution goes here */


return 0;

}

The set of commands will determines the order in which things

Management  of the company should adopt a system for unified communications.

Unified Communications (UC) is a term that connote a kind of a phone system that uses or “unifies” a lot of communication methods within one or the same business.

Note the one's business can be able to communicates in a lot of ways such as  phone calls, video conferencing and as such, Best Med Medical Supplies Corporation  should be considered adopting a system for unified communications.

They should look into:

Learn more about communications from

https://brainly.com/question/26152499

#SPJ1

Answer:

There are two basic operational modes of 8255:

Bit Set/Reset mode (BSR mode).

Input/Output mode (I/O mode).

Features of 8255 Microprocessor:

Mode 0 : Simple Input/Output.

Mode 1 : Input/Output with handshake.

Mode 2 : Bi-directional I/O data transfer.

It has three 8-bit ports : Port A, Port B, and Port C, which are arranged in two groups of 12 pins.

The 8255 can operate in 3 I/O modes : (i) Mode 0, (ii) Mode 1, & (iii) Mode 2.

System testing is a crucial stage where the software design is implemented as a collection of program units.

Unit testing plays a vital role during this phase as it focuses on validating each unit's compliance with its specifications. Unit testing entails testing individual units or components of the software to ensure their functionality, reliability, and correctness.

It involves executing test cases, evaluating inputs and outputs, and verifying if the units perform as expected. By conducting unit testing, developers can identify and rectify any defects or issues within individual units before integrating them into the larger system, promoting overall software quality.

Read more about System testing here:

https://brainly.com/question/29511803

#SPJ1

Answer:

a mixed media installation that delves into the nature of patterns, cycles and resonant frequencies

Answer:

Think of computer software sort of as DNA, because DNA is the human body's computer software. And a computer program is like an activity your body does.

Explanation:

Sorry if this didn't help.

Answer:

1. Marketing intelligence system - C

2. Internal reporting system - A

3. Marketing model - D

4. Marketing research system - B

Explanation:

One reason why a business may want to move entirely online is option  C. To focus on a global market

Boundaries to passage are the costs or other deterrents that anticipate unused competitors from effortlessly entering an industry or zone of commerce.

Therefore, Moving completely online can permit a trade to reach clients past its nearby range and extend its showcase to a worldwide scale. It can moreover decrease the costs related with keeping up a physical storefront and can give more prominent adaptability in terms of working hours and client get to.

Learn more about global market from

https://brainly.com/question/12424281

#SPJ1

Answer:

is all about knowing what to do with the data

Explanation:

determine what to do with your data

The two print statement which would use the toString method correctly to print out information about the movie m are:

In Computer programming, a method can be defined as a block of executable code (sets of instruction) that are written and used by programmers to break down a given problem into small but manageable fragments (pieces).

This ultimately implies that, methods are typically written and used by programmers to break down any complex problem into simple and manageable fragments (pieces) such as in modern programming languages, which comprises several predefined methods.

In conclusion, the "System.out.println(toString());1" and "System.out.println(m.toString()); 1" calls the toString() function which then returns the string representation of the object movie.

Read more on print methods here: https://brainly.com/question/19594241

#SPJ1

Answer:

I believe it's A. MS DOS.

Answer:

Yes it is

Explanation:

An integer constant is nothing but a value consisting of digits or numbers. These values never change during the execution of a program.

Answer:

a. SQL.

b. Rows and columns.

c. ResultSet objects.

d. Primary key.

e. WHERE.

f. ORDER BY.

g. Joining.

h. Database.

i. Foreign key.

j. DriverManager; getConnection ().

k. Connection.

l. Statement.

Explanation:

A database management system (DBMS) can be defined as a collection of software applications that typically enables computer users to create, store, modify, retrieve and manage data or informations in a database. Generally, it allows computer users to efficiently retrieve and manage their data with an appropriate level of security.

A structured query language (SQL) can be defined as a domain-specific language designed and developed for managing the various data saved in a relational or structured database.

In Computer programming, any word restricted for use, only in object names because they belong to the SQL programming language are called reserved word.

Some examples of reserved words in structured query language (SQL) are UPDATE, GROUP, CURRENT_USER, CURRENT_DATE, WHERE, CREATE, DELETE, ORDER BY, etc.

Filling in the missing words or texts in the question, we have;

a. The international standard database language is SQL.

b. A table in a database consists of rows and columns.

c. Statement objects return SQL query results as ResultSet objects.

d. The primary key uniquely identifies each row in a table.

e. SQL keyword WHERE is followed by the selection criteria that specify the rows to selectin a query.

f. SQL keywords ORDER BY the order in which rows are sorted in a query.

g. Merging rows from multiple database tables is called joining the tables.

h. A database is an organized collection of data.

i. A foreign key is a set of columns whose values match the primary-key values of another table.

j. DriverManager method, getConnection () is used to obtain a Connection to a database.

k. Interface connection helps manage the connection between a Java program and a database.

l. A statement object is used to submit a query to a database.

Answer:

An e-book reader is not considered an example of convergence because it is designed for a specific purpose and does not integrate multiple functions or technologies into a single device.

Explanation:

Convergence refers to devices that combine various functions or technologies into one unified device, such as smartphones or tablets. E-book readers primarily focus on providing an optimized reading experience, while converged devices offer a broader range of functionalities beyond a single specialized purpose.

The output of the first statement in the main method is 23.

In this question, the answer is 23 because In java (+) concatenation is used for joining two strings together. If we use statement ("i + j is " + (i + j)) like this then the output will change.but the output of the first statement in the main method is 23.because it print (i) value first that is 2.after that It will print (j) value that is 3.So, the output is 23.

package Unit3_Mod2;

public class Array3DExample3 {

public static void main (String[] argv)

{

int[][][] A = {

{

{1,2,3,4},

{5,6,7,8},

{9,10,11,12}

},

Learn more about output on:

brainly.com/question/14227929

#SPJ1

The two teams are not division leaders, but their records are impressive enough to get them to participate in the tournament. The teams' records are as follows: Team C with 8-3 record and Team D with a 7-4 record. These teams are the second-best teams in their respective divisions, and that is what gets them a spot in the tournament.

The table presented depicts a ranking of teams for a particular tournament. Wildcard teams are teams that do not lead their divisions but have the best records; they get to participate in the tournament. In this case, we will determine the two wildcard teams and their records based on the table.  

The wild card teams in the world legend mushball tournament are Team C and Team D.Team C and Team D are the two wildcard teams in the tournament. They are selected based on their record, as shown in the table. Wildcard teams are often determined by the records of the teams.

The two teams are not division leaders, but their records are impressive enough to get them to participate in the tournament. The teams' records are as follows: Team C with 8-3 record and Team D with a 7-4 record. These teams are the second-best teams in their respective divisions, and that is what gets them a spot in the tournament.

The wildcard teams offer a chance to other teams that may not have made the playoffs a chance to show their skills. The top team in each division automatically qualifies for the playoffs, and the other spots go to the wild card teams. Wild card teams are often the teams that show resilience and a fighting spirit; they do not give up easily and always give their best.

For more such questions on tournament, click on:

https://brainly.com/question/28550772

#SPJ8

Answer your answer is Macro

Explanation:

Macro shares language both the computer and the programmer can undestand.

Answer:

Descending

Explanation:

Answer:

The output is:

0

2

4

Explanation:

First of all, the print statement must be indented with a tab, otherwise it is not part of the for loop.

The range(3) creates an array with values 0,1,2. The variable 'counter' gets those values one after another, and the print statement outputs this value doubled, hence the 0, 2 and 4 output.

Answer:

i do not know

Explanation:

but it helps to communication

Depending on the goal, algorithms might be straightforward or complex.

The definition of an algorithm is "A finite set of rules or instructions to be followed in calculations or other problem-solving procedures" or "A process for solving a mathematical problem in a finite number of steps that typically incorporates recursive operations." To solve a certain problem, an algorithm is a series of discrete steps.

Depending on the goal, algorithms might be straightforward or complex.

The algorithm was created to be language independent, meaning that it is merely a set of simple instructions that may be used to implement it in any language and still provide the same, expected results.

Therefore ,the correct answer is option a) It is clear and cannot be interpreted in more than one way by different people or machines.

To learn more about algorithm refer to:

https://brainly.com/question/24953880

#SPJ1

In Linux we use the terminal to create files and folders.

To create a folder:

1. Open a terminal

2. Go to a directory where you want to create the folder

3. Use the change directory command to go to the directory.

4. Use the mkdir command to make a folder

To create a file:

1. Open a terminal

2. Go to a directory where you want to create a file.

3. use the touch command followed by the filename.

Example to create a directory:

mkdir foldername

Example to create a file:

touch file.txt

Answer:

Various operating systems have different ways of creating folders or directories. Here are steps to create folders or directories in some of the most common operating systems.

Windows  

You can create a new folder in Windows by following the two different ways stated below.

These are the steps for creating a new folder through using the File menu.

Open the location where you want to create the new folder.

Then, select the File menu and click New.

Finally, select the Folder option.

These are the steps to create a folder using the right-click method.

Open any location where you want to save your new folder.

Right-click on any blank area of the screen.

This opens a menu. Select New from the menu.

Lastly, from the menu that opens after you select New, and click Folder.

MS-DOS

These are the steps to create directories in MS-DOS.

Click the Start menu.

Click All Programs and then select on Accessories.

Then, select Command Prompt.

Navigate to the location you want to save your new folder. For example, if you want to open the C drive, the command will be: C:

To create a new directory, type mkdir followed by the folder name of your choice. For example, if I want a folder named projects, I will enter the command, “mkdir projects”.

To create multiple new directories in the newly created directed directory, you can use the md MS-DOS command. For example, if you want to make sub-directories named project1, project2, and project three, your command will be md project1 project2 project3.

Mac OS X

There are three ways to create a new folder in the MAC OS X

These are the steps for creating a new folder through using the File menu.

Open any location where you want to save your new folder.

Afterwards, select the File menu and click New Folder

These are the steps to create a folder using the right-click method.

Open any location where you want to save your new folder.

Right-click on any blank area of the screen.

This option opens the folder menu. Select New Folder from the menu.

These are the steps to create directories in Terminal.

Open the Utilities folder. Start the Terminal program.

Navigate to the location where you want to save your new folder.

To create a new directory, type mkdir followed by the folder name of your choice. For example, if I want a folder named projects, I will enter the command, “mkdir projects”.

To create multiple new directories in the newly created directed directory, you can use the -p Terminal command. For example, if you want to make sub-directories named project1, project2, and project three, your command will be -p project1/project2/project3.

Linux

There two ways of creating a new folder in Linux.

These are the steps for creating a new folder using the right-click method.

First, open the file manager.

Then, proceed to the location where you want to save your new folder.

Next, right-click on a blank spot.

Finally, select Create New Folder from the drop down menu.

These are the steps for creating a new folder using Terminal.

Open Terminal by using the Ctrl+Alt+T combination of keys.

To create a new directory, type mkdir followed by the folder name of your choice. For example, if I want a folder named projects, I will enter the command, “mkdir projects”.

To create multiple new directories in the newly created directed directory, you can use the -p Terminal command. For example, if you want to make sub-directories named project1, project2, and project three, your command will be -p project1/project2/project3.

Explanation:

for plato

She should use the following equipment to complete the IP scanner.

IP scanning is a continuous IT process that involves examining a company network to find IP addresses and find pertinent data linked to those IP addresses and devices. Using an IP range scanner, administrators can set a range of IP addresses to search for any IP addresses that fall within that range.

Using one of the various internet IP lookup tools is the quickest and easiest approach to start learning someone's IP address. The tools to enter an IP address and search for its free public registry results are available at websites like WhatIsMyIPAddress.com or WhatIsMyIP.com.

To know more about IP scanner visit:-

https://brainly.com/question/14989859

#SPJ4

Answer:

Operating System

Explanation:

I think I'm right but I might be wrong

Answer:

Operating System

Explanation:

The RAM is random access memory and is used to calculate tasks in the moment. A file allocation table (FAT) is a table that an operating system maintains on a hard disk that provides a map of the clusters (the basic units of logical storage on a hard disk) that a file has been stored in. GUI is graphical user interface and is basically just the stuff you click on and the interface which a touchscreen may use as well. An operating system is therefore the correct answer.

PLS brainliest

Really need it

thanks mate

Answer:

The answer is:

A) Absolute cell reference

Explanation:

An absolute cell reference is used in Excel when you want to keep a specific cell reference constant in a formula, regardless of where the formula is copied. Absolute cell references in a formula are identified by the dollar sign ($) before the column letter and row number.

Hope this helped you!! Have a good day/night!!

Answer:

Answer:

laptop

Explanation:

laptops are small and they can be taken anywhere.

Answer:

The force required to slide an object is equal to Friction .weight  normal force  friction  µk.

The force required to slide an object is equal to; C: Friction

According to newtons first law of motion, an object will remain at rest or continue in constant motion except it is acted upon by an external force.

Now, when an object is acted upon by an external force it sets it in motion but in the case of sliding, what is required is a force of friction because the object will have some sort of force between the surface that it is acting upon.

Read more about Friction Force at; https://brainly.com/question/13680415

Answer:

what i don't understand your question

Explanation:

Answer:

D. the popularity of digital phototype systems

Explanation:

Answer:

Digital

Explanation:

Analog signals are made up of continuously steaming data. This means that the signal has variation in it. Digital signals though are only on or off, this is represented as 0 (off) or 1 (on) in binary. If a message is disrupted, digital signals are able to be picked up more easily at the exact point the  message dropped, (The segmented nature of the digital signal allows this). Analog signals, on the  other hand, are continuous; if they are disrupted, they must be restarted at the very beginning of  the message. This is why modern devices tend to use digital signals rather  than analog ones.

Answer:

He was referring to the Bible being finished.

Explanation: