Answers
Answer:
A variable
Explanation:
Related Questions
3. How can statistical analysis of a dataset inform a design process?
PLEASE I NEED THIS ANSWER
Answers
Answer:
you have to think then go scratch and then calculate and the design
Explanation:
The statistical analysis of a dataset inform a design process.
What is statistical analysis?Statistical analysis is a kind of tool which helps collect and analyze large amounts of data. This is helpful to identify common patterns of dataset and make trends to convert them into meaningful information.
Designers do make use of statistical analysis of dataset in design process.
Analysis is a key part of design process. Without analysis, nothing can be done in designing process.
Learn more about statistical analysis
https://brainly.com/question/14724376
#SPJ2
A single-cylinder two-stroke SI engine has 8 cm diameter bore and 10 cm stroke. The compression ratio is 8. The exhaust port opens 60° before BDC and closes 60° after BDC. The air/fuel ratio is 15:1. The temperature of the mixture entering into the engine is 300 K and the pressure in the cylinder at the time of closing the exhaust port is 1.05 bar. Take R for the mixture = 290 J/(kg K). Air supplied to the engine is 150 kg/h. The speed of the engine is 4000 rpm. Considering the effective stroke, calculate the scavenging ratio, the scavenging efficiency and the trapping efficiency?
Answers
In a single-cylinder two-stroke SI engine with given specifications, we can calculate the scavenging ratio, scavenging efficiency, and trapping efficiency. These parameters are important for assessing the performance of the engine in terms of combustion and air-fuel mixture management.
The scavenging ratio is the ratio of the total mass of fresh air-fuel mixture supplied to the cylinder to the mass of residual gases left in the cylinder at the end of the exhaust stroke. To calculate the scavenging ratio, we need to determine the mass of fresh mixture supplied and the mass of residual gases remaining in the cylinder.
The scavenging efficiency is the percentage of the fresh mixture that displaces the exhaust gases from the cylinder. It is calculated by dividing the actual mass of fresh mixture scavenged by the total mass of fresh mixture supplied and then multiplying by 100.
The trapping efficiency is the ratio of the mass of fresh mixture trapped in the cylinder to the mass of fresh mixture supplied. It is determined by subtracting the mass of residual gases from the mass of fresh mixture supplied, dividing it by the mass of fresh mixture supplied, and then multiplying by 100.
By using the given engine specifications, such as the air supply rate, engine speed, and compression ratio, along with thermodynamic properties like temperature and pressure, we can calculate the scavenging ratio, scavenging efficiency, and trapping efficiency. These parameters help evaluate the effectiveness of the scavenging process and the utilization of the air-fuel mixture in the engine.
Learn more about single-cylinder here :
https://brainly.com/question/32904308
#SPJ11
A quality com technician has been montong the output of a ming machine Each on the chec 20 perts to measure and plot on the control chart Over 10 days, the average damater wiss 1213 meses w of 00375 meters What is the lower control in CL for an X-bar chant of this st Note: Round your answer to 4 decimal pieces
Answers
Answer:
To calculate the lower control limit (LCL) and center line (CL) for an X-bar chart, we need the average and standard deviation of the sample measurements. However, in the given text, the standard deviation is not provided. Without the standard deviation, it is not possible to calculate the LCL and CL accurately.
If you have the standard deviation value, please provide it so that I can assist you in calculating the LCL and CL for the X-bar chart.
Explanation:
AC motor characteristics require the applied voltage to be proportionally adjusted by an AC drive whenever the frequency is changed. True or false?
Answers
A 100 n uniform ladder of length 8 m rests against a smooth vertical wall. It the coefficient of static friction between the ladder and the floor is. 4, what is the maximum angle that the ladder can make with the floor before it slips?.
Answers
The correct response is E. 39. The maximum angle that the ladder can make with the floor before it slips is 39.
solitary-pole ladders Ladders that extend (maximum length 15 metres) Ladders, Step (maximum height 6.1 metres) Given that you shouldn't be standing on the top three treads of the leaning ladder, a single-story home with a height of at least 4 meters would be suitable. You would require an extension ladder with an extension of about 7 meters for a two-story residence. The short answer is no, leaning a ladder against a gutter is not safe. "For a leaning ladder, you should secure it and have a sturdy top resting point, i.e. do not rest a ladder against weak upper surfaces." It is not a good idea to lean your ladder against a gutter as the gutter could not be strong enough to hold it.
Learn more about ladder here
https://brainly.com/question/27681900
#SPJ4
A 100-N uniform ladder, 8.0 m long, rests against a smooth vertical wall. The coefficient of static friction between ladder and floor is 0.40. What minimum angle can the ladder make with the floor before it slips?
A. 42
B. 22
C. 18
D. 51
E. 39
Why are specimens usually very thin slices of material.
Answers
What is the relationship between green building and self-interest? (Select all that apply.)
Green building is burdensome but has advantages in terms of public image.
Green building should be considered when necessary resources are in short supply.
Green building practices can lead to planning and budget efficiencies in general.
Green building is attractive because of its long-term growth potential as a market.
Answers
The relationship between green building and self-interest include the following:
Green building is burdensome but has advantages in terms of public imageGreen building is attractive because of its long-term growth potential as a market.What is Green building?This is the process of reducing the environmental impact of buildings. This therefore leads to enhancement of the health of people.
Its relationship with self interest can seen listed above as the most appropriate choice.
Read more about Green building here https://brainly.com/question/9779427
#SPJ1
Allura Red Moles
Question of the Day {QOD}:
If you decided to drink massive amounts of Cherry Kool-AidTM on a dare, would you die from Allura Red toxicity or water intoxication first?
5. Answer the Question of the Day. Support your answer with specific evidence from your experimentation including LD50 calculations. In your discussion, calculate both the amount of grams and moles of Allura red in Kool-Aid as well as the volume of Kool-Aid you would need to ingest to reach the median lethal dose of Allura red
The concentration of Allura red used was 1.89x10^-4 M
Kool aid absorbance (after dilution: 1mL kool aid, 9mL water): 0.453
Kool aid concentration: 1.97x10^-4 M
LD50 water: 90g/kg
LD50 (rats and mice): 6,000 - 10,000 mg/kg
Answers
Answer:
Die of intoxication by water first
Explanation:
We assume that the weight of the man is 154.35 pounds which is 70 kg
LD50 water = 90g per kg
Maximum concentration = 90x70
= 6300grams
Convert grams to liters
6300/100
= 6.3 litres
From here we get amount of kool aid
6.3 x 1.97x10^-4
= 1.24x10^-3
= 1.24grams
1.24 grams is below 420 kool aid is lower than LD50 with about 6 grams for 1 kg (6x70kg = 420). So 420 is lethal dose. But 1.24 is less than this so the man has to die of water intoxication first.
If you measure the voltage across a diode and it measures 0.3 V, the diode is probably made of __________ and is __________ biased.
Answers
Answer:
germaniumforwardExplanation:
The forward-biased voltage drop of a semiconductor diode depends on the material it is made of and the method of fabricating the junction.
Voltage dropsA silicon diode will have a voltage drop that can be estimated as 0.7 V. The actual value will depend on current and temperature.
A germanium diode will have a voltage drop closer to 0.3 V, again depending on current and temperature.
A Schottky diode may have a voltage drop between 0.2 and 0.3 V, so may be difficult to distinguish from a germanium diode.
If it measures 0.3 V, the diode is probably made of germanium, and is forward biased.
__
The reverse-biased voltage reading will generally match the open-circuit voltage of the testing device.
1. Describe an occasion in which an explanatory sketch would be used.
the end user how
Answers
Answer:
building a bridge
Explanation:
you would have to sketch ideas to see what the bridge would look like and you need to know what to add to it to enhance the percentage of it working. if you sketch it you would have an idea of the process also
Building a bridge is an occasion in which an explanatory sketch would be used.
What is meant by explanatory sketch ?Sketches of explanations are created to demonstrate form, structure, and function. They accurately and objectively communicate a design, placing more emphasis on explanation than pitch. Outside of the design team, explanation sketches must be understandable.
Exploratory sketches, often referred to as thinking drawings, are a type of personal communication that frequently serve as the starting point for brand-new product concepts.
During a brainstorming session or for personal usage in a design notebook, these quick sketches are meant to quickly capture ideas. Exploratory research aims to study the important aspects of a topic that hasn't gotten much attention.
Thus, it is Building a bridge.
For more details about explanatory sketch, click here:
https://brainly.com/question/13673165
#SPJ2
of the three types of hazard controls – engineering, administrative, and personal protective equipment (ppe) – ppe is the last line of defense.
Answers
Of the three types of hazard controls – engineering, administrative, and personal protective equipment (PPE) – PPE is the last line of defense: True.
What is OSHA?OSHA is simply an abbreviation for occupational safety and health administration that was created under the Occupational Safety and Health Act, so as to develop work-safety standards for workers and providing precautionary measures against all workplace hazards.
The three types of hazard controls.Generally, there are three types of hazard controls and these include the following:
Engineering Controls. Administrative Controls. Personal Protective Equipment (PPE).What is PPE?PPE is an acronym for personal protective equipment and it can be defined as a terminology that is used to denote any piece of equipment which offer protection to different parts of the body while working in a potentially hazardous environment.
Also, some examples of personal protective equipment (PPE) used to protect the different parts of the body are:
RespiratorsFace maskFace shieldGlovesBootsHelmetAccording to occupational safety and health administration (OSHA), the use of a faulty personal protective equipment (PPE) should be the last line of defense.
Read more on PPE here: https://brainly.com/question/19131588
#SPJ1
Complete Question:
Of the three types of hazard controls – engineering, administrative, and personal protective equipment (PPE) – PPE is the last line of defense. True or False?
Bruce wants to present to his client in architectural drawing that shows the exact details of a living room kitchen bedroom and stairs in relation to other areas of the house which type of architectural drawings should Bruce use?
Answers
Answer:
section view in a general plan.
Explanation:
In Engineering, it is a standard and common practice to use drawings and models in the design and development of buildings, tools or systems that are being used for proffering solutions to specific problems in different fields such as banks, medicine, telecommunications and industries.
Hence, an architect or design engineer make use of drawings such as pictorial drawings, sketches, or architectural (technical) drawing to communicate ideas about a plan (design) to others, record and retain informations (ideas) so that they're not forgotten and analyze how different components of a plan (design) work together.
Architectural drawing is mainly implemented with computer-aided design (CAD) software and it's typically used in plans and blueprints that illustrates how to construct a building or an object.
Additionally, architectural drawings such as a section view in a general plan, show in detail how the areas of a building relate to each other, as well as accurately illustrating the actual (true) shape and size of a building in the design and development process.
In this scenario, Bruce wants to present to his client an architectural drawing that shows the exact details of a living room, kitchen, bedroom and stairs in relation to other areas of the house. Thus, the type of architectural drawings Bruce should use is a section view in a general plan.
A section view presents a vertical perspective or view by slicing through the building; revealing the exact details of wall construction, floor-to-floor construction, height and thickness of beam, and other support systems with respect to the living room, kitchen, bedroom, etc., in the building.
Maravita & Iriki: In neglect patients, when using a laser pointer, they ______ to find the midpoint of a line since it was encoded in ______ midpoint since it is now encoded in However, when using a stick, they were _____ to find the______
Were able, near space, were unable, near space
Were able, far space, were unable, near space
Were unable, far space, were able, near space
Were unable, near space, were able, far space
Answers
The correct answer is option Option C.) "Were unable, far space, were able, near space"
Neglect patients can sometimes recover from their neglect through a treatment known as prism adaptation. Maravita and Iriki's study on neglect patients who used laser pointers and sticks to find the midpoint of a line found that when the patients were using laser pointers, they were able to find the midpoint since it was encoded in the near space.
However, when they were using a stick, they were unable to find the midpoint since it was encoded in far space. They found the laser pointer easier to use than the stick because the pointer could encode the midpoint, making it easier for the patients to find it.
The answer to this question is option C. Were unable, far space, were able, near space.
Learn more about spatial encoding:
https://brainly.com/question/33279480
#SPJ11
describe the characteristic common to all of the material removal mechanisms in nontraditional machining processes.
Answers
The common characteristic of all material removal mechanisms in non-traditional machining processes is that they use a tool or electrode to remove material from the workpiece.
This can include processes such as laser cutting, electrochemical machining, electrical discharge machining, and waterjet cutting. These processes are often used when conventional machining methods are inadequate or inefficient, and they are able to achieve high levels of precision and accuracy.
The primary mechanism of material removal in Electron Beam Machining (EBM) is through thermal sputtering. This is a process in which incident electrons, accelerated by a high voltage, strike a surface and cause atoms or molecules to be ejected from the surface.
Learn more about Electron Beam Machining (EBM)
https://brainly.com/question/13391320
#SPJ4
The received signal is the sum of the direct and ground-reflected signals and since they travel at different distances they have different time delays. If the transmitted signal is s(t) then the received signal is x t s t t s t t ( ) ( ) ( ) = − + − 1 2 The amount of delay (in seconds) can be computed for both propagation paths, using the fact that the time delay is the distance divided by the speed of light (3 10 × 8 m/sec). Determine t1 and t2 as a function of d1.
Answers
Answer:
duuuuuuuuuuuuuuuuuhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
Explanation:
duhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
Mandy will need to extend her ladder to 60 feet to reach the roof of her house. To be safe, how far from the base of the house should she place the foot of the ladder?
14 feet
18 feet
20 feet
15 feet
Answers
The most appropriate answer is 15 feet based on the 4:1 ratio guideline. So, the correct choice is option D.
To determine the safe distance from the base of the house where Mandy should place the foot of the ladder, we can use the concept of ladder-to-wall ratio. This ratio is based on the angle at which the ladder is inclined and is crucial for ensuring stability and preventing accidents.
A commonly recommended ladder-to-wall ratio is 4:1. This means that for every four units of vertical height the ladder needs to reach, the base should be positioned one unit away from the wall. In this case, Mandy's ladder needs to reach a height of 60 feet.
Using the 4:1 ratio, we can calculate the safe distance from the base of the house as follows:
60 feet / 4 = 15 feet.
Therefore, Mandy should place the foot of the ladder approximately 15 feet away from the base of the house to ensure stability and safety while reaching the roof. This positioning allows for a proper angle of inclination and provides a stable foundation for the ladder.
Choosing a distance of 14 feet, 18 feet, or 20 feet would result in a different ladder-to-wall ratio, which may compromise stability and increase the risk of accidents.
For more questions on Foot ladder
https://brainly.com/question/30032926
#SPJ11
How does energy transition from one form to another as water moves from behind a dam to downstream of a dam?.
Answers
Answer:
potential energy changes to kinetic energy
Explanation:
Write a program, to divide the list into almost two equally-length parts and output two lists:
Example1: if the length is even
Input: ["1","2","5","8","9","0"]
Output: ["1", "2", "5"] ["8","9","0"]
Example2: if the length is odd
Input: ["1","2","5","8","9"]
Output: ["1", "2"] ["5","8","9"]
Answers
To divide the list into almost two equally-length parts and output two lists, the following Python program can be used:
my_list =
["1","2","5","8","9","0"]
list_length = len(my_list)if list_length % 2 == 0:
# length is even mid = list_length // 2 list1 = my_list[:mid]
list2 = my_list[mid:]else:
# length is odd mid = list_length // 2 list1 = my_list[:mid+1] list2 = my_list[mid+1:]print(list1) print(list2)
The above program divides the list into two almost equal parts by checking whether the length of the list is odd or even.
If the length of the list is even, it divides the list into two equal parts.
If the length of the list is odd, it divides the list into two parts where the first part has one more element than the second part.
In the first example where the input list is ["1","2","5","8","9","0"], the length of the list is even,
To know more about program visit:
https://brainly.com/question/30613605
#SPJ11
All of the following are examples of nonvolatile storage EXCEPT ________.A) hard disk driveB) DVDC) RAMD) USB drive
Answers
Tape drives, HDDs, and SSDs are three frequent instances of NVS hardware that permanently stores data.
The term "non-volatile storage" also refers to the semiconductor chips found inside devices like SSDs, HDDs, tape drives, and memory modules that store data or controller program code. Non-volatile memory (NVM), sometimes known as non-volatile storage, is a kind of computer memory that may continue to hold onto stored data even after the power is turned off. In contrast, volatile memory requires continuous power to maintain data. Solid-state drives (SSDs) are solid-state storage devices that serve as secondary storage in the hierarchy of computer storage and employ integrated circuit assemblies to store data persistently, generally using flash memory. It is also referred to as a solid-state disk or a solid-state device.
Learn more about HDD here:
https://brainly.com/question/28560389
#SPJ4
Design a lighting column subjected to an axial compression force of 30 kN, using a CHS (circular hollow section) cross-section in S275 steel, according to EC3-1-1. The column is fixed at the base and free from the other end and has a length of 3 m.
Answers
The design of a lighting column subjected to an axial compression force of 30 kN using a CHS (circular hollow section) cross-section in S275 steel according to EC3-1-1 is given below;Given;Column length, l = 3mCross-section, CHSDiameter of CHS, d = 168.3 mmThickness of CHS, t = 5 mmAxial compressive force, N = 30 kNMaterial, S275 steelModulus of elasticity,
E = 210 GPaDesign strength, fy = 275 MPaDesign buckling resistance, Nb,Rd (from EC3-1-1 Annex A)Let's calculate the slenderness ratio;Slenderness ratio, λ = Effective length/Radius of gyrationRadius of gyration, r = (d/2) - (t/2) = (168.3/2) - (5/2) = 81.65 mmEffective length, LeFor one end fixed and one end free, the effective length is given by;Le = 0.8l = 0.8 × 3 = 2.4 mLet's calculate the critical buckling stress;
Critical buckling stress, σcrFor class 4 sections, the critical buckling stress is given by;σcr = π² × E / [(Le/r)²]σcr = π² × 210000 / [(2400/81.65)²] = 125.62 MPaLet's calculate the design buckling resistance;Design buckling resistance, Nb,RdFor class 4 sections, the design buckling resistance is given by;Nb,Rd = ϕ × (σcr / γm1) × AeffAeff = Effective area of the CHSFor CHS sections, the effective area is given by;
Aeff = A - 2 × t × (d - t/2)Aeff = (π/4) × [(d²) - ((d-2t)²)]Aeff = (π/4) × [(168.3²) - ((168.3-2×5)²)]Aeff = 10514.95 mm²Nb,Rd = 0.9 × (125.62 / 1.0) × 10514.95 / 10⁶Nb,Rd = 11.21 kNLet's check if the design strength is less than the design buckling resistance or not;Design strength, NEd = 30 kNDesign strength, NEd < Design buckling resistance, Nb,RdSo, the CHS with diameter 168.3 mm and thickness 5 mm is safe for the given axial compressive force of 30 kN and the effective length of 2.4 m according to EC3-1-1.
To know more about lighting visit:
https://brainly.com/question/29994598
#SPJ11
Which sentence from the passage uses passive voice?
Question 9 options:
a)
E-books also make reading easier for people with disabilities. (paragraph 12)
b)
M.K. sees it another way. (paragraph 16)
c)
In one year, e-reader production released 2350 million kilograms of carbon dioxide into the atmosphere. (paragraph 8)
d)
The Diamond Sutra was printed in China in 868 AD. (p
Answers
Answer:
"The Diamond Sutra was printed in China in 868 AD." (paragraph 4)
Explanation:
I took the test
3.Water flows in a rectangular open channel with a width of 4 m. The depth of the flow is 2 m with a discharge of 20 m^3/sec. Determine the change in depth if the channel width is increased by 1 m? (negletting losses) and find the value of Fr from both conditions and identify the type of flow.
Answers
From the question above, :Width of the channel = 4 m
Depth of the flow = 2 m
Discharge = 20 m³/sec
Change in channel width = 1 mAs the discharge is constant, we have the equation of continuity as;
Q = A₁V₁ = A₂V₂
Where,Q = Discharge in m³/s
V₁ = Velocity of fluid in the original channel
A₁ = Area of the flow in the original channel
V₂ = Velocity of fluid in the new channel
A₂ = Area of the flow in the new channel
As the channel is rectangular in shape, we can write the equation as;
Q = W₁ * D₁ * V₁ = W₂ * D₂ * V₂
Where, D₁ = D₂ = D (Depth of flow)
W₁ = 4 m
W₂ = 4 + 1 = 5 m
V₁ = Velocity of fluid in the original channel
V₂ = Velocity of fluid in the new channel∴
4 * 2 * V₁ = 5 * D₂ * V₂∴ 8V₁ = 5D₂V₂∴ V₂ = 8/5 * V₁
The velocity of fluid in the new channel = 1.6V₁
Type of flow in the original channel can be determined using the Froude number as;
Fr = V₁/ √gD
Where g is the acceleration due to gravity
Fr₁ = V₁/ √gD = V₁/ √(9.81 * 2) = V₁/ 4.429
Fr₂ = V₂/ √ gD = (1.6V₁)/ √(9.81 * 2) = 1.6V₁/ 4.429
Fr₁ = V₁/ √gD = V₁/ 4.429
Fr₂ = 1.6V₁/ 4.429
Fr₁ < 1 → Subcritical flow
Fr₂ < 1 → Subcritical flow
As the value of Fr is less than 1, the type of flow is Subcritical flow
.Change in depth of the flow;
D₂ - D₁ = (W₁/W₂ - 1) * D₁D₂ - 2 = (4/5 - 1) * 2
D₂ - 2 = -0.4∴ D₂ = 1.6 m
Change in depth of the flow = D₂ - D₁ = 1.6 - 2 = -0.4 mA
Learn more about continuity equation at
https://brainly.com/question/31460508?
#SPJ11
Thermoplastics that exhibit a definite TM point have this kind of crystalline structure:
A. semi-crystalline
B. isotactic
C.amorphous
D. syndiotactic
Answers
Answer:
The correct option is A
Explanation:
Thermoplastics are polymers that can be recycled. They can be melted with heat and moulded into any shape which becomes hard when cooled. The heat applied to it in the process of recycling does not affect its chemical composition.
There are two main classes of thermoplastics; semi-crystalline and amorphous.
An amorphous thermoplastic has a disorderly arranged molecular structure which makes it difficult to have a definite melting temperature (Tm). However, a semi-crystalline thermoplastic has a well arranged molecular structure which makes it melt after a certain/definite amount of heat is absolved. Hence, the correct answer is A
the engine needs a free flow of clean air to operate correctly and with low emissions. True or False
Answers
Answer:
true
Explanation:
To measure an object accurately, what point on the ruler would you align with the object edge
Answers
Answer:
Along the zero to measure an object on a ruler
Is a backup generator a good investment for your home?.
Answers
Answer:
As a homeowner, buying a generator could spare you financial losses, like food spoilage, when power outages strike. Also, if you work from home, a standby generator is a solid investment, as it ensures you won't suffer a loss of income due to circumstances outside your control.
18) Technician A says that adjustable wrenches should be used when
torquing fasteners. Technician B says that adjustable wrenches can round
the edges of fasteners. Which technician is correct?
A) Technician A only
B) Technician B only
O C) Both technicians
D) Neither technician
Answers
a wide-flange steel-beam shape, w12 x 14, has a cross-sectional area of 4.12 in2. convert the area to mm2.
Answers
To convert the cross-sectional area of the wide-flange steel beam from square inches (in²) to square millimeters (mm²), we need to use the conversion factor between the two units. The cross-sectional area of the wide-flange steel beam, w12 x 14, is approximately 2662.9432 mm² when converted from 4.12 in².
1 square inch (in²) is equal to 645.16 square millimeters (mm²).
Given that the cross-sectional area of the beam is 4.12 in², we can calculate the equivalent area in mm² as follows:
Area in mm² = Area in in² x Conversion factor
= 4.12 in² x 645.16 mm²/in²
Calculating the result, we find:
Area in mm² ≈ 2662.9432 mm²
Therefore, the cross-sectional area of the wide-flange steel beam, w12 x 14, is approximately 2662.9432 mm² when converted from 4.12 in².
Learn more about millimeters here
https://brainly.com/question/30807697
#SPJ11
What is the mass of a brass axle that has a volume of 0.318 cm?
Answers
Answer:
2.7g
Explanation:
the mass of a brass axle that has a volume of 0.318 cm is 2.7g.
Tech B says that a resistance reading on a lightbulb requires the DMM to behooked to each side of the bulb and the switch turned on. Who is correct?
Answers
Tech B is correct. When taking a resistance reading on a lightbulb, the Digital Multimeter (DMM) must be hooked up to each side of the lightbulb with the switch turned on. This is because in order for the DMM to measure the resistance of the lightbulb, there must be a complete circuit with current running through it.
To measure the resistance of the lightbulb, the DMM needs to measure the voltage drop across the bulb. This voltage drop can only be measured if there is a current flowing through the lightbulb.
So, when the switch is turned on, the current is flowing through the lightbulb, allowing the DMM to measure the voltage drop across it and, in turn, the resistance.
If the switch is off, there is no current flowing through the lightbulb, so the voltage drop across it will be zero and the DMM will be unable to measure the resistance of the bulb.
Therefore, Tech B is correct and the DMM must be hooked up to each side of the lightbulb with the switch turned on in order to take a resistance reading.
Both the Technicians have different opinions about the resistance reading on a lightbulb.
Tech A says that a resistance reading on a lightbulb requires the DMM to be hooked up to each side of the bulb, while Tech B says that the DMM should be hooked to each side of the bulb and the switch turned on.
For more such questions on Digital Multimeter
https://brainly.com/question/29512413
#SPJ11