Patrols should typically be undertaken _________ to confirm if lighting is operational.
a. during hours of darkness
b. in daylight
c. both a) and b)
d. during rush hour

Answer:

3

Explanation:

it is compulsory to have a bachelor's degree

Once the interior design project is complete, the deliverables must be accepted properly. Following explains how completed interior design project deliverables shall be accepted.

Acknowledge the designers and any additional workers who assisted in the project. It should also describe what was accomplished and what the final outcome should look like. Explain in detail what was done and if everything meets your needs and specifications. During the review, ask to see samples of the products that were used to complete the design. This is your chance to express any concerns you may have. Finally, after a thorough inspection, once you're satisfied with the final product, you can accept the completed interior design project. To do so, you may have to sign off on the work in order to provide confirmation that the job has been completed to your satisfaction. For instance, in the case of an office space, once the project is finished, you can acknowledge the designers who worked on the project. During the inspection, ask for a demonstration of any furniture items or equipment that were used. You may also want to make certain that everything is in good working order. Finally, once everything has been checked and you're happy with the final product, you can sign off on the work to accept the completed interior design project.

To learn more about interior design, visit:

https://brainly.com/question/31865896

#SPJ11

Answer:

Can't help

Explanation:

Algorithms with linear behavior do less work than algorithms with quadratic behavior for most problem sizes n is true.  The correct option is A. True.

Algorithms with linear behavior have a time complexity of O(n), meaning the time it takes to solve a problem increases linearly with the size of the input. On the other hand, algorithms with quadratic behavior have a time complexity of O(n^2), meaning the time it takes to solve a problem increases exponentially with the size of the input.

For most problem sizes n, algorithms with linear behavior will do less work than algorithms with quadratic behavior. This is because the time it takes to solve the problem increases at a slower rate for linear algorithms compared to quadratic algorithms.

Therefore, choosing an algorithm with linear behavior is usually more efficient for solving problems than choosing an algorithm with quadratic behavior. The correct option is A. True.

Learn more about Algorithms visit:

https://brainly.com/question/31936515

#SPJ11

Answer:

Explanation:

Find the present value of the cost of new equipment every 6 years using the formula for present value of an annuity:

PV = A * (1 - (1 + r)^-n) / r

Where:

PV = Present value

A = Annuity payment

r = Interest rate

n = Number of periods

In this case, A = $750,000, r = 8%, and n = 6 years. Plugging these values into the formula, we get:

PV = $750,000 * (1 - (1 + 0.08)^-6) / 0.08 = $3,519,702.81

Add the present value of the cost of new equipment to the initial construction and equipment costs:

Total present value = $4,000,000 + $1,500,000 + $3,519,702.81 = $9,019,702.81

This is the amount of money that the university needs to have in an endowment in order to earn 8% interest and cover the costs of the lab and new equipment.

Therefore, the required endowment is $9,019,702.81.

Answer:

  infinite

Explanation:

The impedance of an ideal parallel resonant circuit is infinite at the resonant frequency. The sum of the admittances of the branches of the circuit is zero.

Answer:

yes

Explanation:

blueprint of the construction is a prediction of project its is slightly auto cad

The velocity when the cable becomes taut can be obtained by assuming

that the tugboat collides with a barge moving in the same direction.

Response (approximate value):

Weight of the tugboat, m₁ = 240–ton

Speed of the tugboat, v₁ = 6 ft./s

Weight of the barge, m₂ = 100–ton

Rate at which the towing cable is being unwound, v₂ = 5.4 ft./s

Required:

Velocity of the tugboat after the cable becomes taut.

Solution:

m₁ = 240 ton = 240,000 kg

m₂ = 100 ton = 100,000 kg

The velocity of the barge at rest is assumed to be the rate at which the cable is being unwound, and in the direction of the tugboat.

According to the law of conservation of linear momentum, we have;

m₁ × v₁ + m₂ × v₂ = (m₁ + m₂) × v₃

Which gives;

240 × 6 + 100 × 5.4 = (240 + 100) × v₃

1980 = 340 × v₃

Which gives;

\(v_3 = \dfrac{1980}{340} = \dfrac{99}{17} = 5\frac{14}{17} \approx \mathbf{ 5.824}\)

The velocity of the tugboat after the rope becomes taut is 5.824 ft./s

Learn more about the law of conservation of linear momentum here:

https://brainly.com/question/4388270

Using the what-if function in Excel to make a decision is considered a type of forecast and scenario model

Excel is Microsoft's spreadsheet program and is part of the Office family of business application products. Microsoft Excel allows users to format, organize, and calculate data in spreadsheets.

Using software such as Excel to organize data makes it easier for data analysts and other users to view information when data is added or changed. Excel contains numerous fields called cells arranged in rows and columns. Data is placed in these cells. Excel is part of the Microsoft Office and Office 365 suites and is compatible with other applications in the Office suite. Spreadsheet software is available for Windows, macOS, Android, and iOS platforms.

Learn more about excel https://brainly.com/question/24749457

#SPJ4

Answer:

B.

Explanation:

I think not sure hehe

Answer:true

Explanation:

Answer:

Keeps workers interested and motivated, helping reduce dangerous behavior and eliminate hazardous situations

Explanation:

Frequent hands-on training and practice drives home the message that safety is a critical part of any work site. Safety should always be a top concern for every company and organization.

Answer:

Opened Push-button Switch (i.e. a PTM Switch)

Explanation:

Tha's just another symbol for a switch, but this one specifies that the switch is a push-button type of switch.

Since it's not touching and completing the line, the state of the switch is initially open.

c

it could not be d it cover about all the lights u would have to have thick dirt can't be a way to little dirt u would have to just throw dirt on ur lights and b same thing to little amount of dirt

Answer:

Explanation: 2 is thy answer

Nec Article 430 covers selection of time-delay fuses for motor- overload protection.

Article 430 that is found in  National Electrical Code (NEC) is known to be state as “Motors, Motor Circuits and Controllers.” .

Note that the article tells that it covers areas such as motors, motor branch-circuit as well as feeder conductors, motor branch-circuit and others.

Therefore, Nec Article 430 covers selection of time-delay fuses for motor- overload protection.

Learn more about motor- overload from

https://brainly.com/question/20738481

#SPJ1

In Stokes flow, the fluid velocity is proportional to the forces acting on the fluid and the fluid is assumed to be viscous and incompressible. The fluid velocity near a rotating sphere in Stokes flow can be determined using the equations of fluid dynamics.

Kinematic reversibility is a property of Stokes flow, which states that the fluid flow is symmetric with respect to time reversal. This means that if the fluid velocity is recorded at a certain time, then the same velocity field will be obtained if time is reversed and the flow is replayed in the reverse direction.

When a sphere is rotating near a wall, the flow of fluid around the sphere creates a velocity field that pushes the sphere away from the wall. This flow can be considered as the fluid being pushed away from the sphere and towards the wall. If the flow is time-reversed, the fluid velocity field would be the same, but the direction of the velocity would be reversed. This means that the fluid would be drawn towards the sphere and away from the wall, pulling the sphere towards the wall.

Therefore, based on the property of kinematic reversibility in Stokes flow, the rotating sphere near a wall will experience a force that could either push it away from the wall or draw it towards the wall, depending on the direction of the flow.

Learn more about reversibility from

https://brainly.com/question/3454191

#SPJ1

Answer: See explanation

Explanation:

69.48 / 7.2 = 965 as written in the question isn't correct. The correct answer should have been:

69.48 / 7.2 = 9.65

It should be noted that when we divide, the answer that one gets cannot be more than the two numbers that were used for the division. Hence, there's no way that 965 would be more than 69.48 and 7.2.

The covers and guardrails are required in all of the following areas except ditches.

Yes, they do need a covers and/or guardrails and it is one that is known or shall be provided to help in the protection of personnel from the hazards that pertains to open pits, tanks, vats and others.

Note that they are often needed that is covers and/or guardrails need to be provided to help to protect personnel.

Therefore, The covers and guardrails are required in all of the following areas except ditches.

Learn more about guardrails from

https://brainly.com/question/12757849

#SPJ1

Using the formula of comfort condition it is possible to determine the safe operating speed on the highway.

In physics, we define angular deviation as the angle resulting from the deflection of light when reflected from a prism. A prism has the ability to separate white light into several other colors, which are reflected by the object.

The comfort condition formula is given by: \(L=2(\frac{NV^{3} }{C} )^{\frac{1}{2} }\)

Where, L is the length of the vertical curve, N is the grade, V is the safe speed operation and assuming the standart value for C (0,6 m/s3) it is possible to calculate:

\(C = 0,6 m/s^{3} = 1,968 ft/s^{3}\\ N= N1 - N2 = 7,5-0 = 7,5% = 0,075\)

Changing the values in the formula:

\(L=2(\frac{NV^{3} }{C}){\frac{1}{2} } \\300 = 2(\frac{0,075.V^{3} }{1,968})^{\frac{1}{2} } \\V = 83,89 ft/s\)

So, the safe operating speed on the highway is 83,89 ft/s.

See more about engineering at: brainly.com/question/12812715

#SPJ1

The relative velocity is defined as the velocity of an object with respect to another observer. It is the time rate of change of relative position of one object with respect to another object.

The relative velocity of A with respect to B= velocity of the body A – velocity of the body B.

The relative velocity formula is expressed as. V → = V A B → + V B C → Where. VAB is the velocity with respect to A and B, VBC is the velocity with respect to B and C and VAC is the velocity with respect to A and C.

To learn more about relative velocity, refer

https://brainly.com/question/17228388

#SPJ9

If an engine fails during rollout or just before takeoff, immediately shut both throttles and land the aircraft safely. Before reaching a safe single engine speed right away after takeoff, drop your nose to increase velocity.

Closing the throttle, turning off the fuel pump, setting the mixture control to idle cutoff, and simply cranking the engine is the most reliable hot start method I've found.

If an engine fails during rollout or just before takeoff, immediately shut both throttles and land the aircraft safely. Before reaching a safe single engine speed right away after takeoff, drop your nose to increase velocity. If you are unable to climb, close both throttles and land straight ahead.

The typical practice for the majority of aircraft would be to abandon takeoff if an engine failed during takeoff. In small aircraft, the pilot should turn the throttles down to idle, activate the speed brakes (if provided), and apply the brakes as needed if the engine fails before VR (Rotation Speed).

To learn more about engine procedure refer to:

https://brainly.com/question/18428188

#SPJ1

Using the knowledge in computational language in C++ it is possible to write the code being write a class having two private variables

#include <iostream>

using namespace std;

class Rectangle { /*create a class named Rectangle*/

  private:

  float l,b; /*this class has two private variables l and b*/

  public:

  float getArea(float l, float b) /*this class has one member-function getArea which returns the area of the rectangle*/

  {

   return l*b; /*return the area of the rectangle*/

  }

};

int main () { /*the main function to check the working of our Rectangle class*/

 float l,b;

 Rectangle r1; /*create an object r1 of Rectangle class*/

 cout<<"Enter the length of the rectangle: ";

 cin>>l; /*input the length of the rectangle from the user*/

 cout<<"Enter the breadth of the rectangle: ";

 cin>>b; /*input the breadth of the rectangle from the user*/

 cout <<"Area of the rectangle is: "<< r1.getArea(l,b)<<" square units."; /*find the area of the rectangle using the member function of the class*/

 return 0;

}

See more about C++ at brainly.com/question/19705654

#SPJ1

Answer:

Then miss try to get your school to banned it for your district like forbid then from the web site then it will not allow them to use it. then sometimes use it to help other people who needs help like teachers do or we need help with something we dont know so we ask for help for a better understanding of it.

Explanation:

^-^ hope you have a good day miss or sir

Answer:

So I would love to say that you and your team at your school had banned brainly and why are you using brainly here, then you shouldn't use brainly, and brainly all students around the world gets help even you is one.

the battery and ODC input voltages, as well as the main parameters for the power source, fireworks, relays, anti-static resistances, etc. The statements below refer to the design and operation of the power sub-system on a spacecraft.

Solar panels on these spacecraft convert solar energy into the electricity they require for propulsion. The electricity generated by the solar panels is used to recharge a battery within the spacecraft. These batteries can power the spaceship even as it is traveling away from the sun.

The engine, temperature management, power and power distribution, attitude control, telemetry command and control, transmitters/antenna, computers/on-board processing/software, and structural components are only a few of the many subsystems that make up a spaceship bus.

To know more about spacecraft's subsystems visit:-

https://brainly.com/question/29610872

#SPJ1

Answer:

Magic

Explanation:

magic is the answer to everything unexplainable