PAGE
DATE
0 What types of information should be there internet?
Answers
Answer:
The kind of information that should be on the internet must be one that is good.
Explanation:
Qualities of good information are as follows:
A) Relevance:
For the purpose it was published, to the audience, it was intended for, every information put out there on the internet must be relevant. This is key and not negotiable. Perhaps its relevance may wane over time, however, in the period it was posted, it has to speak to the intended purpose.
B) Complete:
Incomplete information automatically becomes misleading or useless.
To say Donald Trump was a United States president in 2021 would be factually correct. However, that statement is misleading because he also stepped down in the same year for Joe Biden. Now that gives a complete and true picture of the Presidency of the United State of America (POTUS) in 2021.
C) Accuracy:
Accuracy means there is little chance for misinterpretation, misinformation, and misrepresentation of facts.
Essentially, if it's a spade, don't call it a pen.
D) Clarity:
"In 2020, delegates to the White House to speak about the problems so that we can be happy so the problems have to go away soon"
The above statement at its best only tells us that someone sent delegates to the White House to speak about problems. We don't know what the problem was, who the delegates were, nor do we know who sent them. Clarity is key. The next point conciseness also helps with this.
E) Conciseness
Another word for this is brevity.
This does not necessarily mean one must only publish short messages on the internet. It simply means that you must make your point with the least amount of words possible.
F) Authenticity
Call it trustworthy information if you like. People make decisions based on information they have received. If one must put out information on the internet, it must be true, factual, and correct.
Cheers
Related Questions
What type of animation is used to move objects off of a slide?
Answers
Answer:
Exit. Animations are used to animate slide objects off a slide.
Explanation:
Have a awesome day
-Roxanne Wolf
Build an NFA that accepts strings over the digits 0-9 which do not contain 777 anywhere in the string.
Answers
To construct NFA that will accept strings over the digits 0-9 which do not contain the sequence "777" anywhere in the string we need the specific implementation of the NFA which will depend on the notation or tool used to represent NFAs, such as state diagrams or transition tables.
To build an NFA (Non-Deterministic Finite Automaton) that accepts strings over the digits 0-9 without containing the sequence "777" anywhere in the string, we can follow these steps:
Start by creating the initial state of the NFA.
Add transitions from the initial state to a set of states labeled with each digit from 0 to 9. These transitions represent the possibility of encountering any digit at the beginning of the string.
From each digit state, add transitions to the corresponding digit state for the next character in the string. This allows the NFA to read and accept any digit in the string.
Add transitions from each digit state to a separate state labeled "7" when encountering the digit 7. These transitions represent the possibility of encountering the first digit of the sequence "777".
From the "7" state, add transitions to another state labeled "77" when encountering another digit 7. This accounts for the second digit of the sequence "777".
From the "77" state, add transitions to a final state when encountering a third digit 7. This represents the completion of the sequence "777". The final state signifies that the string should not be accepted.
Finally, add transitions from all states to themselves for any other digit (0-6, 8, 9). This allows the NFA to continue reading the string without any constraints.
Ensure that the final state is non-accepting to reject strings that contain the sequence "777" anywhere in the string.
In conclusion, the constructed NFA will accept strings over the digits 0-9 that do not contain the sequence "777" anywhere in the string. The specific implementation of the NFA will depend on the notation or tool used to represent NFAs, such as state diagrams or transition tables.
For more such questions on NFA, click on:
https://brainly.com/question/30846815
#SPJ8
Create a VBScript script (w3_firstname_lastname.vbs) that takes one parameter (folder name) to do the following 1) List all files names, size, date created in the given folder 2) Parameter = Root Folder name The script should check and validate the folder name 3) Optionally, you can save the list into a file “Results.txt” using the redirection operator or by creating the file in the script. 4) Make sure to include comment block (flowerbox) in your code.
Answers
Answer:
Set args = Wscript.Arguments
If (WScript.Arguments.Count <> 1) Then
Wscript.Echo "Specify the folder name as a command line argument."
Else
objStartFolder = args.Item(0)
Set objFSO = CreateObject("Scripting.FileSystemObject")
if (Not objFSO.FolderExists(objStartFolder)) Then
Wscript.Echo "Folder "&objStartFolder&" does not exist"
Else
Set objFolder = objFSO.GetFolder(objStartFolder)
Set colFiles = objFolder.Files
For Each objFile in colFiles
Wscript.Echo objFile.Name, objFile.Size, objFile.DateCreated
Next
End If
End If
Explanation:
Here's some code to get you started.
Do these devices allow you to view photos using the cloud?
Please help I'll give 30 points QUICK!
Answers
Answer:
Yes, You can view the cloud on those devices
Answer: C is it
Explanation:
The stronger the voltage, the stronger the flow of ____in an electrical circuit .
A.electron
B.ohms
C.coulombs
D.neutron
Answers
The stronger the voltage, the stronger the flow of electron in an electrical circuit .
The correct answer is A electrons.
In an electrical circuit, the flow of electric current is carried by charged particles, primarily electrons. When a voltage is applied across a circuit, it creates an electric field that exerts a force on these charged particles, causing them to move. The movement of electrons constitutes the flow of electric current.
Voltage, measured in volts (V), represents the potential difference or electrical pressure between two points in a circuit. A higher voltage implies a greater potential difference, which in turn exerts a stronger force on the electrons. As a result, the flow of electrons becomes more pronounced and the current in the circuit increases.
On the other hand, options B, C, and D are not accurate in this context. Ohms (option B) represents the unit of electrical resistance, coulombs (option C) represents the unit of electric charge, and neutrons (option D) are neutral particles found in the nucleus of an atom, unrelated to the flow of current in an electrical circuit.
For more such questions on voltage, click on:
https://brainly.com/question/1176850
#SPJ8
In troubleshooting a boot problem, what would be the point of disabling the quick boot feature in BIOS/UEFI setup?
Answers
Performs the process faster because it skips a check of the memory.
lan is working on a project report that will go through multiple rounds of
revisions. He decides to establish a file labeling system to help keep track of
the different versions. He labels the original document
ProjectReport_v1.docx. How should he label the next version of the
document?
A. ProjectReport_revised.docx
B. ProjectReport_v1_v2.docx
C. Report_v2.docx
D. ProjectReport_v2.docx
Answers
Answer:It’s D
Explanation:
APEVX
The label of the next version of the document can probably be ProjectReport_v2.docx. The correct option is D.
What is a document?A document's purpose is to enable the transmission of information from its author to its readers.
It is the author's responsibility to design the document so that the information contained within it can be interpreted correctly and efficiently. To accomplish this, the author can employ a variety of stylistic tools.
Documentation can be of two main types namely, products and processes. Product documentation describes the product under development and provides instructions on how to use it.
A document file name is the name given to a document's electronic file copy.
The file name of the document does not have to be the same as the name of the document itself. In fact, you can use the shortest possible version of the name.
As the document here is second version of the previous one, so its name should be ProjectReport_v2.docx.
Thus, the correct option is D.
For more details regarding document, visit:
https://brainly.com/question/27396650
#SPJ2
For the following code please:
1. Keep scanning from user until user enters -1
2. Store the numbers in ascending order as the user enters
3. Have a loop to check if the number where the number should be and insert it in that index
4. Print out the final array.
import java.util.ArrayList;
import java.util.Scanner;
public static void main(String [] args) {
ArrayList numbers = new ArrayList ();
System.out.println(“Enter numbers one after another. Once done enter -1”);
}
Answers
import java.util.Scanner;
public class Main {
public static void main(String [] args) {
ArrayList numbers = new ArrayList<>();
System.out.println("Enter numbers one after another. Once done enter -1");
Scanner scan = new Scanner(System.in);
int num = scan.nextInt();
while (num != -1) {
int index = 0;
for (int i = 0; i < numbers.size(); i++) {
if (numbers.get(i) < num) {
index++;
}
}
numbers.add(index, num);
num = scan.nextInt();
}
System.out.println("The final array is: " + numbers);
}
}
in the situation above, what ict trend andy used to connect with his friends and relatives
Answers
The ICT trend that Andy can use to connect with his friends and relatives such that they can maintain face-to-face communication is video Conferencing.
What are ICT trends?ICT trends refer to those innovations that allow us to communicate and interact with people on a wide scale. There are different situations that would require a person to use ICT trends for interactions.
If Andy has family and friends abroad and wants to keep in touch with them, video conferencing would give him the desired effect.
Learn more about ICT trends here:
https://brainly.com/question/13724249
#SPJ1
Drag each option to the correct location on the image.
faulty cables remove and reinsert cables blinking lights
ensuring that the computer is
drawing power from the outlet
restarting the computer
NETWORK ISSUES
network collision
TROUBLESHOOTING TECHNIQUES
4
Answers
Here is the correct placement of the options on the image:
NETWORK ISSUES
* faulty cables
* remove and reinsert cables
* blinking lights
* ensuring that the computer is drawing power from the outlet
* restarting the computer
* network collision
How to explain the informationIf the network cable is faulty, it can cause network issues. To fix this, remove and reinsert the cable.
If the network lights on your computer or router are blinking, it can indicate a problem with the network connection. To fix this, check the cables and make sure that they are properly plugged in.
Ensuring that the computer is drawing power from the outlet: If the computer is not drawing power from the outlet, it will not be able to connect to the network. To fix this, make sure that the power cord is plugged in properly.
Learn more about network on
https://brainly.com/question/1326000
#SPJ1
What’s the term for a current flow in which electrons move in one direction
Answers
Answer:
Direct Current
Explanation:
MARK ME BRAINLIEst pls
CHALLENGE 6.1.1: Basic function call. ACTIVITY Complete the function definition to return the hours given minutes. Output for sample program when the user inputs 210.0: 3.5 1 test passed A tests passed 1 #include 2 using namespace std; 3 4 double GetMinutesAsHours (double origMinutes) { 5 6 /* Your solution goes here 7 8} 9 10 int main() { 11 double minutes; 12 13 cin >> minutes; 14 15 // Will be run with 210.0, 3600.0, and 0.0. 16 cout << GetMinutesAsHours (minutes) << endl; 17 18 return; 19}
Answers
he main function should conclude with a return 0; statement, which is C++'s standard way of declaring that the program successfully executed.
What are arguments and return values in a function?Functions can employ both return values and parameters. A return value is the result of the function's execution. It can be used as required after being returned to the block of code that called the function. The input that a function needs in order to run and create a result is called a parameter. Any string that you supply to your function when you call it serves as the argument. The number of words is the return value.
#include <iostream>
using namespace std;
double GetMinutesAsHours(double origMinutes) {
double hours = origMinutes / 60.0;
return hours;
}
int main() {
double minutes;
cin >> minutes;
cout << GetMinutesAsHours(minutes) << endl;
return 0;
}
To know more about program visit:-
https://brainly.com/question/30613605
#SPJ1
you can take care of the computer in the following ways except _____
a. connecting it to a stabilizer before use b. using it always
Answers
You can take care of the computer in the following ways except by using it always (Option B).
How can the computer be cared for?To care for a computer and guarantee its ideal execution and life span, here are a few suggested ones:
Keep the computer clean: Frequently clean the outside of the computer, counting the console, screen, and ports, utilizing fitting cleaning devices and arrangements. Ensure against tidy and flotsam and jetsam: Clean flotsam and jetsam can collect the interior of the computer, driving to overheating and execution issues. Utilize compressed discuss or a computer-specific vacuum cleaner to tenderly expel tidiness from the vents and inner components. Guarantee legitimate ventilation: Satisfactory wind stream is basic to anticipate overheating. Put the computer in a well-ventilated zone and guarantee that the vents are not blocked by objects. Consider employing a portable workstation cooling cushion or desktop fan in case vital.Utilize surge defenders: Interface your computer and peripherals to surge defenders or uninterruptible control supply (UPS) gadgets to defend against control surges and electrical vacillations that can harm the computer's components.Learn more about computers in https://brainly.com/question/19169045
#SPJ1
In this problem, we consider sending real-time voice from Host A to Host B over a packet-switched network (VoIP). Host A converts analog voice to a digital 64 kbps bit stream on the fly. Host A then groups the bits into 56-byte packets. There is one link between Hosts A and B; its transmission rate is 10 Mbps and its propagation delay is 10 msec. As soon as Host A gathers a packet, it sends it to Host B. As soon as Host B receives an entire packet, it converts the packet’s bits to an analog signal. How much time elapses from the time a bit is created (from the original analog signal at Host A) until the bit is decoded (as part of the analog signal at Host B)?
Answers
Approximately 10.0448 milliseconds elapse from the time a bit is created at Host A until it is decoded at Host B.
How to solveTo calculate the time elapsed from the creation of a bit at Host A until it is decoded at Host B, we need to consider several factors:
Conversion of analog voice to a digital 64 kbps bit stream: This process happens on the fly and takes negligible time.
Grouping of bits into 56-byte packets: Since each packet contains 56
Since a byte comprises 8 bits, a packet would have 56 bytes, or 448 bits in total.
The link between Hosts A and B has a specified transmission rate of 10 Mbps, which is measured in megabits per second.
The delay in propagation is specified as 10 milliseconds.
Based on these variables, we are able to determine the amount of time that has passed in the following manner:
Time to transmit one packet = (448 bits) / (10 Mbps) = 44.8 microseconds
Note: We divide by the transmission rate to convert the number of bits into time.
Time for propagation = 10 msec
Therefore, the total time elapsed from the creation of a bit at Host A until it is decoded at Host B is:
Total time = Time to transmit one packet + Time for propagation
= 44.8 microseconds + 10 msec
≈ 10.0448 milliseconds
So, approximately 10.0448 milliseconds elapse from the time a bit is created at Host A until it is decoded at Host B.
Read more about packet network here:
https://brainly.com/question/30812347
#SPJ1
When gathering information, which of the following tasks might you need to
perform?
OA. Fill out forms, follow procedures, and apply math and science
OB. Seek out ideas from others and share your own ideas
C. Apply standards, such as measures of quality, beauty, usefulness,
or ethics
OD. Study objects, conduct tests, research written materials, and ask
questions
Answers
Answer:
OD.OD. Study objects, conduct tests, research written materials, and ask
What do search engines use to trust that a local business is an appropriate place for which users are looking?
Answers
Answer:
To build trust among search engines, authority needs to be demonstrated not just in a website's content, but how the site is perceived by other authoritative sites. ... Garnering links from authoritative sites like social networks, directories and other sources will improve trust.
explains why sorting and filtering is so important when using Excel; explains why employers want potential employees to know how to create PivotTables and charts
Answers
The reason why sorting and filtering is so important in Excel is that it help you to analyze your data very well.
Why is sorting so vital when using Excel?Excel is known to be a software that helps one to sort the full range of data that had been selected.
It is also known to use filter as this helps a person to better work on their data.
The use of a pivot table is vital to an employer as it will help him or her easily work on the data and come to a fast and accurate decision.
Learn more about sorting from
https://brainly.com/question/15049854
Which of the following is not a characteristic of a healthy relation?
Answers
You would like the cell reference in a formula to remain the same when you copy
it from cell A9 to cell B9. This is called a/an _______ cell reference.
a) absolute
b) active
c) mixed
d) relative
Answers
Answer:
The answer is:
A) Absolute cell reference
Explanation:
An absolute cell reference is used in Excel when you want to keep a specific cell reference constant in a formula, regardless of where the formula is copied. Absolute cell references in a formula are identified by the dollar sign ($) before the column letter and row number.
Hope this helped you!! Have a good day/night!!
Answer:
A is the right option absoluteThe issue “when a user deletes the data, whether all the copies are deleted or not is something that every needs to have a clear answer to” comes under which of the following?
Answers
The issue “when a user deletes the data, whether all the copies are deleted or not is something that every needs to have a clear answer to” comes under aspect of data deletion and data lifecycle management.
What is the deletion?One need rules and practices to delete data to follow privacy laws, protect data, and meet user expectations. When a user gets rid of data, it is important to check if all copies of that data have been effectively removed from the system or storage.
Data Retention Policies: Organizations must create clear rules about how long they will keep certain data before getting rid of it.
Read more about deletion here:
https://brainly.com/question/30280833
#SPJ1
Select the correct answer from each drop-down menu.
What are the different ways in which you can use a Smart Object for image manipulation?
You can_____
a Smart Object without editing your image pixels directly. Alternately, you can_____
the Smart Object as a separate image even after placing it in a Photoshop image.
Reset Next
1.
A. Remove
B. Scale
C. Darken
2.
A. Lighten
B. Edit
C. Compress
Answers
Answer: A and C
Explanation:I did it before
A client has the right to receive ethically conducted research. Discuss this statement with examples.
Answers
A client has the right to receive ethically conducted research. This means that the researcher should adhere to the principles of scientific research, which includes honesty, objectivity, integrity, and respect for human subjects. In addition, the researcher should ensure that the research is conducted in a safe and responsible manner.
What is research?
Research is defined as "creative and methodical activity done to improve the body of knowledge." It entails the objective gathering, organising, and analysis of data in order to improve comprehension of a subject or issue. A research effort could build on prior contributions to the field. Research may duplicate portions of earlier projects or the project as a complete to verify the accuracy of instruments, processes, or experiments.
Documentation, discovery, interpretation, as well as the research and development (R&D) of methods & systems again for advancement of human knowledge are the main goals of basic research (as opposed to applied research). Research methodologies are based on epistemologies, which differ greatly within and between the humanities and sciences.
To learn more about research
https://brainly.com/question/25257437
#SPJ13
What is a feature of Accenture’s myNav platform?
A. supports a more responsive, cost-efficient, and secure workplace platform for project deployment and full upgrades.
B. powers a highly automated, data-driven, and low-risk approach to adopting and maintaining MS Office suites
C.helps assess, architect, and simulate Cloud solutions to determine the right Cloud architecture based on our clients’ business needs
D. enhances ability to innovate, boost business results, and speed up a client’s journey to intelligent enterprises
D.
Answers
One feature of Accenture’s myNav platform is that it:
C. Helps assess, architect, and simulate Cloud solutions to determine the right Cloud architecture based on our clients’ business needsAccording to the given question, we are asked to state one feature of Accenture’s myNav platform and how it affects the cloud computing for businesses.
As a result of this, we can see that this Accenture’s myNav platform is designed to help businesses navigate through their cloud solutions so that they can choose the package that would meet their client's business needs.
Therefore, the correct answer is option C
Read more here:
https://brainly.com/question/25675206
And office now has a total of 35 employees 11 were added last year the year prior there was a 500% increase in staff how many staff members were in the office before the increase
Answers
There were 5 staff members in the office before the increase.
To find the number of staff members in the office before the increase, we can work backward from the given information.
Let's start with the current total of 35 employees. It is stated that 11 employees were added last year.
Therefore, if we subtract 11 from the current total, we can determine the number of employees before the addition: 35 - 11 = 24.
Moving on to the information about the year prior, it states that there was a 500% increase in staff.
To calculate this, we need to find the original number of employees and then determine what 500% of that number is.
Let's assume the original number of employees before the increase was x.
If we had a 500% increase, it means the number of employees multiplied by 5. So, we can write the equation:
5 * x = 24
Dividing both sides of the equation by 5, we find:
x = 24 / 5 = 4.8
However, the number of employees cannot be a fraction or a decimal, so we round it to the nearest whole number.
Thus, before the increase, there were 5 employees in the office.
For more questions on staff members
https://brainly.com/question/30298095
#SPJ8
The program should prompt the user to enter two integers. The program should store these
values into variables a and b and compare the two integers entered then say which number is
greater than the other. E.g. If a user enters 20 and 40, the program should say that 40 is
greater than 20. If the values entered are equal the program should display that the first
number is equal to the second number or else display that invalid data has been entered. Use
if else statements to implement your solution.
Answers
Explanation:
Begin
Prompt : please enter & first number:
Please enter & second number:
a number;
b number;
a := first number
b := second number
If (a>b) then
Display (a || 'is grater than' || b) ;
else if (b>a) then
Display (b || 'is grater than' || a) ;
else if (a==b) then
Display (a || 'is equal to' || b) ;
else
Display ('Invalid data has been entered') ;
end if;
End;
Hope it helps!
Hope it helps! Please mark it as brainliest!
Question 1
The decimal number system problem solving question
Statement: Several digits '8' are written and some '+" signs are interested
to get the sum 1000. Figure out how it is done.
Answers
Answer:
888 + 88 + 8 + 8 + 8 = 1000
Explanation:
Required
Add up to 1000 using only digit 8
There is no straight way to answer this question; so, we make use of trial by error method to arrive at our solution.
After several trials, I found out that:
888 + 88 + 8 + 8 + 8 = 1000
In PowerPoint, what is the easiest way to go back to the first slide in a slide presentation?
Answers
Using the keyboard shortcut: Press the "Home" key on your keyboard to go back to the first slide in a slide presentation. This shortcut works in both the Normal view and the Slide Show view.Clicking on the "Slide Show" tab:
Click on the "Slide Show" tab in the Ribbon.Click on the "From Beginning" button in the "Start Slide Show" group to go back to the first slide in a slide presentation. This button works in both the Normal view and the Slide Show view.
Another way to go back to the first slide in a slide presentation is by right-clicking on the current slide and selecting "First Slide" from the context menu.
In PowerPoint, the easiest way to go back to the first slide in a slide presentation is by using the keyboard shortcut or by clicking on the "Slide Show" tab. Below are the steps to do so:
Using the keyboard shortcut:Press the "Home" key on your keyboard to go back to the first slide in a slide presentation. This shortcut works in both the Normal view and the Slide Show view.Clicking on the "Slide Show" tab:
Click on the "Slide Show" tab in the Ribbon. Click on the "From Beginning" button in the "Start Slide Show" group to go back to the first slide in a slide presentation. This button works in both the Normal view and the Slide Show view.
Another way to go back to the first slide in a slide presentation is by right-clicking on the current slide and selecting "First Slide" from the context menu.
This option works in the Slide Show view only. In conclusion, these are the easiest ways to go back to the first slide in a slide presentation in PowerPoint.
By following the steps mentioned above, one can easily navigate through their PowerPoint presentation and get back to the first slide without any difficulty.
For more such questions on slide, click on:
https://brainly.com/question/29995331
#SPJ8
who here plays overwatch or paladins ps4? I'm getting overwatch soon and need people to play with. please don't report this.
Answers
Answer:
I'm down to play
Explanation:
What are some of the ways we can resolve IPv4 address shortages? Check all that apply.
Answers
Answer:
I am not as close to the network as I used to be but I have not seen articles about the network apocalypse due to IPv4 address depletion. Unlike in the late 90’s when predictions of apocalypse were everywhere.
What happened?
Two things:
Network address translation (NAT) was introduced to allow organizations to use private addresses on their internal network and minimize the requirement for “real” IP4 addresses.
Second, IPv6 was created and introduced to expand the number of addresses available.
So, a direct answer is use IPv6 and/or NAT for internal networks.
Explanation:
Write a Boolean function named isPrime which takes an integer as an argument and returns true if the argument is a prime number, or false otherwise. Use the function in a program that prompts the user to enter a number then displays a message indicating whether the number is prime.
Answers
Answer:
public static lotsof verbosekrap(String args[]) {
int num;
printf("Enter this nonsense BF: ");
scanf("%d", &num);
isPrime(num);
}
public boolean isPrime(int num) {
if (num == prime) {
returns true;
} else {
returns "your mom sucks and fails";
}
Explanation:
this is a mix of C and Java, I don't care