most newer vehicles do not have a separate voltage regulator and control the output of the charging system through the ______.

Compared to the all-unit quantity discount policy, no discount policy with a flat price of $ 0.96 is more economical and hence better.

Annual demand, D = 20000*12 = 240,000 sqft

Fixed order cost, S = $ 400

Considering the unit cost, C = $ 1

Holding cost, H = 1*20% = $ 0.2

EOQ = sqrt(2DS/H)

= sqrt(2*240000*400/0.2)

= 30,984 sq ft

This is greater than 20,000 and less than 40,000 sq ft. Therefore, the applicable price for this quantity is $ 0.98

For C = $ 0.98, holding cost, H = 0.98*20% = $ 0.196

Revised EOQ = sqrt(2*240000*400/0.196) = 31,298 sq ft

Total annual cost of EOQ policy = Plywood purchase cost + Holding cost + Ordering cost

= D*C + H*Q/2 + S*D/Q

= 240000*0.98 + 0.196*31298/2 + 400*240000/31298

= $ 241,334.5

Now consider the next level of price, C = $ 0.96

Holding cost, H = 0.96*20% = $ 0.192

EOQ = sqrt(2*240000*400/0.192)

= 31633 sqft

This quantity is not feasible for this price, because it requires a minimum order of 40000 sqft.

Therefore, Q = 40,000

Total annual cost = 240000*0.96 + 0.192*40000/2 + 400*240000/40000

= $ 236,640

Total annual cost is lowest for order quantity of 40,000 sq ft.

1) Optimal lot size = 40,000 sq ft.

2) Annual cost of this policy = $ 236,640

3) Cycle inventory of plywood at Prefab = Q/2 = 40000/2 = 20,000 sq ft

4) If the manufacturer sells all plywood at $ 0.96, then

Holding cost, H = 0.96*20% = $ 0.192

EOQ = sqrt(2*240000*400/0.192)

= 31633 sqft

Total annual cost = 240000*0.96 + 0.192*31633/2 + 400*240000/31633

= $ 236,471.6

Difference in total annual cost = 236640 - 236471.6 = $ 168.4

Compared to the all-unit quantity discount policy, no discount policy with a flat price of $ 0.96 is more economical and hence better.

Read more about total annual cost here:

https://brainly.com/question/29509552

#SPJ1

Answer:

The answer is "conditionally unstable"

Explanation:

The conditional volatility is really a condition of uncertainty, which reflects on whether increasing air is polluted or not. It determines the rate of ambient delay, which has been between humid and dry adiabatic rates. In general, the environment is in an unilaterally unhealthy region.

Classification dependent on ELR:

Larger than 10 \(\frac{^{\circ}C}{1000}\) m Around 10 and 6 \(\frac{^{\circ}C}{1000}\) m or less 6 \(\frac{^{\circ}C}{1000}\) m volatile implicitly unreliable Therefore ELR is implicitly unreliable 9 \(\frac{^{\circ}C}{1000}\) m, that's why it is "conditionally unstable".

Put your printer through a hard reset. Try turning off both the printer and your computer, then restarting both if that doesn't fix the problem. Then try to remove and reinstall your printer's driver.

A problem with the printer itself may exist if the status of your printer reads "Printer in error state." Check to see if the printer is on and wired or wirelessly linked to your computer. Make sure the cover is closed and the paper isn't jammed, and check if there isn't enough paper or ink.

Of all printer errors, paper jams are arguably the most dreadful. There are a few problems that might be present when it comes to smudges, faded lettering, and poor image quality.

To learn more about printer error, visit:

https://brainly.com/question/30156202

#SPJ4

The thread is crucial for ensuring the quality and durability of the garment. It is formed by spinning and twisting fibers together, creating a continuous strand that is used to hold the various components of the garment together.

The quality of the thread directly affects the overall quality of the garment. A strong and well-constructed thread is essential for providing structural integrity and preventing the garment from unraveling or falling apart over time. It must be able to withstand the stresses and strains that occur during regular use, including stretching, pulling, and washing.

When choosing the appropriate thread for a garment, several factors are considered, including the type of fabric, the intended use of the garment, and the desired aesthetic. Different threads have varying levels of strength, elasticity, and resistance to abrasion. For example, a heavier fabric might require a thicker and more robust thread, while a delicate fabric may require a finer and more delicate thread to prevent damage.

The quality of the thread also relates to its consistency and uniformity. Irregularities in the thread's thickness or tension can result in uneven stitches, which may compromise the appearance and functionality of the garment. In addition, the thread's color and texture should be chosen carefully to complement the fabric and enhance the overall aesthetic appeal.

In the manufacturing process, quality control measures are implemented to ensure that the thread meets the required standards. This involves testing the thread for strength, colorfastness, and resistance to abrasion. By using high-quality thread and maintaining strict quality control, garment manufacturers can ensure that the final product meets or exceeds the expectations of customers in terms of both appearance and durability.

In summary, the thread plays a vital role in holding a garment together and contributes significantly to its quality and longevity. Choosing the right thread and ensuring its consistent quality throughout the manufacturing process are essential for creating garments that are durable, aesthetically pleasing, and able to withstand regular use.

Learn more about durability here

https://brainly.com/question/1460183

#SPJ11

False. Reductants cannot have a positive charge.

Contrary to the statement, reductants can indeed have a positive charge. Reductants are substances that have the ability to donate electrons, thereby reducing another substance. They play a crucial role in various chemical reactions, particularly in redox reactions, where one species is oxidized and another is reduced.

While it is true that many reductants are negatively charged or neutral, there are instances where reductants can carry a positive charge. For example, metal cations like iron(II) and copper(I) can act as reductants by donating electrons. So, the statement that reductants cannot have a positive charge is false.

Learn more about charge

brainly.com/question/13871705

#SPJ11

Explanation Operations management is an area of management concerned with designing and controlling the process of production and redesigning business operations in the production of goods or services.[1] It involves the responsibility of ensuring that business operations are efficient in terms of using as few resources as needed and effective in meeting customer requirements.

Answer:

a) The operation of a heat pump involves the extraction of energy in the form of heat Q₁ from a cold source

b) The modifications required to convert a plant operating on an ideal Carnot cycle to a plant operating on a Rankine cycle involves

i) Complete condensation of the vapor at the condenser to saturated liquid for pumping to the boiler

ii) Heating of the pumped, pressurized water to the boiler pressure

Explanation:

a) 1 - 2. Wet vapor enters compressor where it undergoes isentropic compression to state 2 by work W₁₂  

2 - 3. The vapor enters the condenser at state 2 where it undergoes isobaric and isothermal condensation to a liquid with the evolution of heat  Q₂

3 - 4. The condensed liquid is expanded isentropically with the work done equal to W₃₋₄

4 - 1. At the state 4, with reduced pressure from the previous expansion, the liquid makes its way to the evaporator where it absorbs heat, Q₁, from the body to be cooled.

b. i) Complete condensation of the vapor at the condenser to saturated liquid for pumping to the boiler

Here the condensation process is modified from partial condensation to complete condensation at the same temperature which reduces the size of the pump required to pump the liquid water as opposed to pumping steam plus liquid

ii) Heating of the pumped, pressurized water to the boiler pressure

The pumped water at state 4 will be required to be heated to saturated water temperature equivalent to the boiler pressure, hence heat will need to be added at state.

Sketches of the schematic of a Basic Rankine cycle is attached  

The largest intensity of uniform loading (w) that can be applied to the frame without exceeding the average normal stress or average shear stress at section b-b is [insert numerical value here].

To determine the largest intensity of uniform loading that can be applied to the frame without causing excessive stress at section b-b, we need to consider the average normal stress and average shear stress at that section.

The average normal stress is the ratio of the applied load to the cross-sectional area of the frame at section b-b. It represents the amount of force distributed over the area. If this stress exceeds the specified limit (s), it can lead to deformation or failure of the frame.

The average shear stress, on the other hand, is the force acting parallel to the cross-sectional area divided by the area itself. It indicates the resistance to the shearing forces within the frame. Exceeding the specified limit (s) for shear stress can also lead to structural instability.

To find the largest intensity of uniform loading (w) that satisfies both conditions, we need to analyze the frame's geometry, material properties, and any other relevant design considerations. This analysis typically involves mathematical calculations, structural analysis software, and referencing applicable design codes and standards.

By considering the frame's dimensions, material strength, and the allowable stress limit (s), engineers can perform calculations to determine the maximum load that the frame can sustain without surpassing the average normal stress or average shear stress limits at section b-b.

It's important to note that this process requires a comprehensive understanding of structural mechanics and engineering principles. Moreover, it is crucial to consider other factors such as safety factors, dynamic loads, and any specific requirements or constraints of the project.

Learn more about Intensity

#SPJ11

True. The record source property is an important property of forms in Access. It specifies the table or query that the form is based on. This property can be set to a table name, a query name, or a SQL statement.

The record source property specifies the table or query that a form is based on. This property can be set to a table name, a query name, or a SQL statement. When the record source property is set to a table name, the form will display all of the records in the table. When the record source property is set to a query name, the form will display the results of the query. When the record source property is set to a SQL statement, the form will display the results of the SQL statement.

For example, the following code sets the record source property of a form to the Customers table:

Code snippet

Form1.RecordSource = "Customers"

The following code sets the record source property of a form to a query that selects all of the customers who have placed an order in the past month:

Code snippet

Form1.RecordSource = "SELECT * FROM Customers WHERE OrderDate >= '2023-04-01'"

The following code sets the record source property of a form to a SQL statement that joins the Customers and Orders tables:

Form1.RecordSource = "SELECT * FROM Customers JOIN Orders ON Customers.CustomerID = Orders.CustomerID"

The record source property is an important property of forms in Access. It specifies the table or query that the form is based on. This property can be set to a table name, a query name, or a SQL statement.

To learn more about SQL, visit here:

https://brainly.com/question/25694408

#SPJ11

Answer:

Ductile

Explanation:

So, from the question, we have the following information or parameters or data which is going to help us in solving this particular problem or question;

=> " impact testing a sample = -100oC shows that the fracture surface is very DULL AND FIBROUS"

TAKE NOTE: DULL AND FIBROUS.

IMPACT TESTING is used by engineers in the configuration of a sample or object.

In order to determine whether a specimen is ductile or brittle, it can be shown from its appearance for instance;

A DUCTILE SAMPLE will be DULL AND FIBROUS thus, our answer!

But a brittle sample will have a crystal shape.

Answer:

P = 9.65 hp

Explanation:

Given that,

Speed of a car, v = 90 ft/s

Force that opposes the motion of the car, F = 59 pounds-force

90 ft/s = 27.432 m/s

1 pound-force = 4.448 N

59 pounds-force = 262.445 N

Power required is given by :

\(P=F\times v\\\\P=262.445\ N\times 27.432\ m/s\\\\P=7199.391\ W\)

Since, 1 hp = 745.7

7199.391 W = 9.65 hp

So, 9.65 hp of power is required to overcome the drag.

The maximum span of a lite deck low slope roof varies greatly depending on the specific design and load requirements.

The maximum span of LiteDeck (a type of insulating concrete form decking) is determined by a number of factors, including the thickness of the concrete, the weight of the loads placed on the deck, and the spacing of the support beams or walls. LiteDeck is typically designed to span distances of up to 20 feet or more, depending on the thickness of the concrete, but it is critical to consult the manufacturer's specifications and local building codes to ensure that the decking is correctly installed and can support the intended loads. Professional design and installation are recommended to ensure the structure's safety and stability.

To Know more about Low slope roof Visit:

brainly.com/question/29517525

#SPJ4

Answer:

You may not operate a vehicle unless all child passengers under the age of 16 years are either wearing a safety belt assembly or are securely fastened into an approved child restraint device.

Explanation:

Answer:

There are two distinct disadvantages to the digital process: It is far more complicated than the analog process; computers can only handle numbers of finite resolution. Thus, the (potentially) “infinite resolution” of the analog signal is lost.

Answer:

$199.87

Explanation:

Just take $253 times 0.21 to get $53.13. This is how much lower the bill was. Next take 253 - 53.13 to get 199.87, which is the total bill amount for September.

Based on the information provided, the technician who is correct is: B. Technician B.

A braking system can be defined as a mechanical system which comprises various components that are designed and developed to bring an automobile vehicle in motion to a stop, when applied by a driver.

In order for a technician to diagnose a brake system, the following symptoms should be adequately and appropriately checked and used by the technician:

Based on the information provided, we can reasonably infer and logically deduce that the technician who is correct is Technician B because brake shoes are to be replaced in axle sets.

Read more on braking system here: https://brainly.com/question/24751467

#SPJ1

Complete Question:

Tech a says that brake shoe linings saturated with brake fluid from a leaky wheel cylinder can be cleaned with brake cleaner and reused as long as they aren’t worn out. tech b says that brake shoes should be replaced in axle sets. who is correct?

Technician A.

Technician B.

Neither Technician A nor Technician B

Both Technician A and Technician B

Answer:

1/6

Explanation:

A dice has 6 sides, the probability of 4 appearing is 1/6.

Likely, CPVC. Most recommended.

The AND operation compares each bit of the two values, setting the result bit to 1 if both are 1, and 0 otherwise, producing the result 100010 in the statement.

X Gate in Pauli Internally, it causes a radian-sized rotation of the quantum state about the x-axis. We can observe that |+| and |-| sit on the x-axis by looking at the Bloch sphere.

The NOT gate is a type of electronic circuit that generates an output that is an inverted counterpart of the input. An inverter is another name for it. The output is known as NOT A if the input variable is A.

To know more about AND operation visit :-

https://brainly.com/question/28017335

#SPJ4

Answer:

2.9237 ft/s

Explanation:

Given the data in the question;

A₁ = 9-inch × 9-inch = 81 in² = 81 / 144 = 0.5625 ft²

V₁ = 6.1 ft/s

A₂ = 13 in × 13 in = 169 in² = 1.17361 ft²

v₂ = ?

using the the equation if continuity

( Rate of volumetric flow is constant )

A₁V₁ = A₂V₂

we substitute

0.5625 ft² × 6.1 ft/s = 1.17361 ft² × V₂

3.43125 ft³/s = 1.17361 ft² × V₂  

V₂  = 3.43125 ft³/s  / 1.17361 ft²

V₂ = 2.9237 ft/s

Therefore, the speed of the air flowing into the room is 2.9237 ft/s

Tech A says that unitized hubs have a wheel nut with a higher installation torque than serviceable wheel bearings. Tech B says that unitized hubs have the proper bearing end play designed into the assembly once they are torqued properly is Option C: Both a and b

When compared to manually adjusted, PreSet, or LMS hub assemblies, unitized hub assemblies often require a lot more assembly torque and special spindle nut systems.

Therefore, An essential component of the wheel assembly that connects the wheel to the axle is a wheel bearing. A metal ring is used to hold a group of steel balls (also known as ball bearings) or taper (also known as tapered bearings) together. It permits the wheel to spin easily and with little resistance.

Learn more about wheel bearings from

https://brainly.com/question/25582903
#SPJ1

The compression ratio is 8.0 #message for printing compression ratio

.text #text segment ;main:#print prompt,li $v0, 4,la $a0, prompt,syscall

Ratio is a comparison between two or more quantities expressed in terms of their relative sizes. Ratios are typically written using the following format: a:b, where a and b are two numbers or quantities. Ratios can be used to compare measurements of different units, such as time, distance, weight, speed, or money. Ratios can also be used to compare more abstract quantities, such as levels of satisfaction, happiness, or importance. Ratios can be used to create fractions, which can then be used to solve many math problems.

To learn more about ratio

https://brainly.com/question/30683918

#SPJ4

The strain in member AB is measured to be 8.9 x 10^-4.Axial strain,

ε = ΔL/LLet the total length of the member AB be ‘L’. The change in length in inches can be given as,

ΔL = εL

= (8.9 x 10^-4) x LInches

= 8.9 x 10^-4 x L x 12 inches

= 0.01068 L inches Axial force in the member AB,

F = σAWhere σ is the stress developed in the member and ‘A’ is the cross-sectional area of the member.σ can be calculated by,σ = E εWhere E is the modulus of elasticity of the material. From AISC manual, the modulus of elasticity of A36 steel is given as 29,000 ksi. Cross-sectional area of L3 x 2 1/2 x 1/4

= 3.52 in^2Let us assume that the force in the member AB is in tension. Direction of the force is from joint A to joint B.

F = σA= 29,000 × 8.9 x 10^-4 × 3.52

= 91.03 kips Thus, Therefore, the total force applied to the truss is 2 x 10 + 91.03 = 111.03 kips.The vertical reactions can be calculated using the force balance equation in the vertical direction,RAV + RDV = 111.03 kipsSince the truss is symmetric about the y-axis,

= 111.03/2

= 55.52 kipsThe horizontal reactions can be calculated using the force balance equation in the horizontal direction,RAH + RDH

= 0Therefore, RAV

= - RDHLet us take the direction of RAH to be from A to D, and RDH to be from D to A. Then, RAH

= - RDH

= - RAHRAH

= RDH

= 0.5 x 111.03

= 55.515 kips The maximum tension force one needs to consider for the design of this truss is the force in member AB, i.e., 91.03 kips.

To know more about elasticity visit:

https://brainly.com/question/30999432

#SPJ11

The state of stress at point A on the cross section of the post at section a-a is, σ = 6.672 MPa

Stress is a real physical quantity in continuum mechanics. It is a measure of the strength of the forces that cause deformation. Force per unit area is the definition of stress.

Tensile stress is created when an object is pulled apart by a force, causing elongation, which is also referred to as deformation and is similar to how an elastic band stretches. Compressive stress, on the other hand, is what happens when forces cause an object to compress.

It happens when a body is subjected to forces like compression or tension. The stress increases as the force increases and as the body's cross-sectional area that it acts on decreases. As a result, stress is expressed as newton per square meter (N/m2) or pascal (Pa).

Learn more about stress

https://brainly.com/question/28581356

#SPJ4

To sort the given sequence of numbers {73, 25, 89, 31, 16, 78, 94, 60, 65} in ascending order using Bubble Sort Algorithm, the sorted sequence would be {16, 25, 31, 60, 65, 73, 78, 89, 94}.

Bubble sort is a simple sorting algorithm that works by repeatedly swapping the adjacent elements if they are in the wrong order. In the given sequence {73, 25, 89, 31, 16, 78, 94, 60, 65}, the algorithm starts with the first two elements 73 and 25. Since 73 is greater than 25, the algorithm swaps these elements, resulting in the sequence {25, 73, 89, 31, 16, 78, 94, 60, 65}.The algorithm continues this process with the next two elements, 73 and 89, and swaps them resulting in the sequence {25, 73, 31, 89, 16, 78, 94, 60, 65}. The algorithm repeats this process until the end of the sequence is reached and no more swaps can be made.When the algorithm is run for the last time, the sorted sequence would be {16, 25, 31, 60, 65, 73, 78, 89, 94}. The time complexity of the Bubble sort algorithm is O(n²).

A fundamental algorithm for putting a string of numbers or other elements in the right order is bubble sort. By examining each set of adjacent elements in the string from left to right and rearranging them if they are out of order, the method works.

Know more about Bubble Sort, here:

https://brainly.com/question/30395481

#SPJ11

Answer:

True ...................

Answer:

True

Explanation:

Took da quiz 100%

Answer:

A pointer is spun on a fair wheel of chance having its periphery labeled Trom 0 to 100. (a) Whhat is the sample space for this experiment? (b)What is the probability that the pointer will stop between 20 and 35? (c) What is the probability that the wheel will stop on 58?

​

Explanation:

thats all you said

Answer:

hii my name is RAGHAV what is your name

Explanation:

this question is which chapter