JAVA: Given the double variable numInches, type cast numInches to an integer and assign the value to the variable newInches. Ex: If the input is 5.13, then the output is: 5
Answers
The double variable numInches, type cast numInches to an integer and assign the value to the variable newInches is System.out.println(num +"5.13 "+ cost + "\n");
What is double variable?A double variable must be created in some way.By using the double keyword before the variable, a double value may be defined. This form of data, which has decimal digits of 14 or 15, was one that you frequently utilised. The 64-bit floating data type double is used in variables.Both fractional and entire values can be represented using a double type. Together with the digits before and after the decimal point, it has a maximum number of digits of 15 possible.Negative values for double (double-precision floating-point) variables range from -1.79769313486231E308 to -4.94065645841247E-324 when stored as IEEE 64-bit (8-byte) floating-point integers.To learn more about double variable numInches refer to:
https://brainly.com/question/28267095
#SPJ4
Related Questions
Problem No. 2: Constant Pressure Filtration (8 pt)
A plate-and-frame press filter is used to filter an aqueous suspension, working under constant pressure of 4.0 bar, so that 300 L of filtrate are obtained after 45 min of filtration.
=> The actual filtration rate (dV/dt) at a time of 45 min is...
Problem No. 3: Constant Rate Filtration (8 pt)
Assuming the same filter as in Problem No.2 (with the same cake and filter medium) is used for filtration of an aqueous suspension, but desired for working at a constant filtration rate of 200 L/h.
=> What pressure drop (ΔP) would be attained after 45 min from the start ?
Answers
The actual filtration rate (dV/dt) for a time interval of 45 minutes is given by the formula: dV/dt = Q/A = (300 L / 45 min) / A = 6.67 L/min.
How is constant pressure filtration calculated?Constant rate filtration is described by the equation P = av c A 2 (V) d V d t + R m A d V d t. If the average specific resistance and dry cake mass per unit volume of filtrate are constant, i.e. for incompressible filtration, then Eq. (5) should be linear. In Eq. 1, the "filtration constants"
300 L of filtrate were collected after 45 minutes.
The following calculation can be used to calculate the actual filtration rate (dV/dt):
\(dV/dt = A * (dh/dt)\)
(dV/dt) = Q/A
where Q represents the filtrate's volumetric flow rate.
As a result, the real filtration rate (dV/dt) at 45 minutes is:
dV/dt = Q/A = (300 L / 45 min) / A = (6.67 L/min) / A
To know more about filtration rate visit:-
https://brainly.com/question/13718887
#SPJ1
in mining auxiliary operations are the supplementry steps that support the production cycle . elucidate the auxiliary operations of underground mining?
Answers
Answer:
The answer is below
Explanation:
The mining auxiliary operations in underground mining involve various activities that are important for a successful mining operation particularly in the areas of productive operating conditions.
The activities involved in the auxiliary operations in underground mining include the following: ventilation, haulage, drainage, power supply, lighting, delivery of compressed air, water, supplies to the working sections, and communications.
Two technicians are discussing solder repair. Technician A says that solder should be applied to the soldering iron tip while soldering Technician B says that the solder should be applied
to the wire joint while soldering.
Answers
Two technicians are discussing solder repair. Technician A says that solder should be applied to the soldering iron tip while soldering Technician B says that the solder should be applied to the wire joint while soldering. The correction technician is: "Both Technician A and B (Option C)
What is soldering?Soldering is a joining method that uses solder to bind several metals together. Solder is a metal alloy typically composed of tin and lead that is melted using a hot iron.
The iron is heated to a temperature above 600 degrees Fahrenheit before cooling to form a strong electrical connection. To put it another way, soldering is the process of uniting metal pieces to produce a mechanical or electrical link.
It commonly employs a low melting point metal alloy (solder), which is heated and applied to the metal pieces to be connected, and when the solder solidifies, it attaches to the metal parts and makes a connection.
Learn more about soldering:
https://brainly.com/question/28555395
#SPJ1
Full Question:
Two technicians are discussing solder repair. Technician A says that solder should be applied to the soldering iron tip while soldering Technician B says that the solder should be applied to the wire joint while soldering. Who is Correct?
Technician ATechnician ABoth Techician A and BNeither Techician A nor BA site is underlain by a 10 meter layer of saturated gravel with unit weight = 20 kN/m3. Point A is located 5 meters below the ground surface. The horizontal effective stress at point A is 30 kPa. Determine the lateral stress ratio of the soil at point A.
Answers
Answer:
The lateral stress ratio of the soil at point A is 0.3
Explanation:
given that; Unit weight = 20 kNm⁻³ at point A 5m below the ground surface,
vertical stress (\(V_{stress}\)) = 20 kNm⁻³ × 5m ⇒ 100 kNm⁻²
vertical stress (\(V_{stress}\)) = 100kPa
note that; Horizontal Stress (\(H_{stress}\)) is given by k(\(V_{stress}\))
where "k" is the lateral stress ratio
\(H_{stress}\) = k(\(V_{stress}\))
k = \(H_{stress}\) ÷ \(V_{stress}\)
k = 30 kPa ÷ 100 kPa
k = 0.3
Which of the following can not be used to store an electrical charge?
Answers
In a dual zone climate control system, the ducts and airflow are split. Which of the following are used to control the temperatures
A. Evaporators
B. Heater cores
C. Compressors
D. Air mix doors
Answers
Answer:
D. Air mix doors
Explanation:
Air doorways are used to control the temperature in the dual-zone climate control system.
Electronics and electrical
Convert the decimal number 2497.50 base 10 to it equivalent octal
Answers
Hope this help
When you park on a hill,the direction your __are pointed determines which direction your car will roll if the breaks fail
Answers
Answer:
Tires or wheels? I think this is the answer. ^_^
Explanation:
Show that pressure at a point
in a fluid has the same
magnitude in all directions.
Answers
you can draw something like this
given the standard cell potential for this cell is 0.115 v, and the measured cell potential is 0.0925, what is the concentration of chloride ions in the solution?
Answers
The concentration of chloride ions in the solution can be calculated by using the Nernst equation.
The Nernst equation is used to calculate the potential of an electrochemical cell under non-standard conditions. It relates the electrode potential to the concentrations of the species present in the solution.
The Nernst equation is:E = E° - (RT/nF) ln(Q)where, E is the cell potential under non-standard conditions,E° is the standard electrode potential, R is the gas constant, T is the temperature, n is the number of moles of electrons transferred, F is the Faraday constant, and Q is the reaction quotient.In this case, the standard cell potential (E°) is 0.115 V, and the measured cell potential (E) is 0.0925 V.
The reaction is given as:2AgCl(s) + 2e- → 2Ag(s) + 2Cl-(aq)We can see that n = 2 (two electrons are transferred in the reaction).The Nernst equation can be rearranged to solve for the concentration of chloride ions (Cl-) in the solution:ln(Cl-) = (E° - E)/(0.0592/n)ln(Cl-) = (0.115 - 0.0925)/(0.0592/2)ln(Cl-) = 0.378M[Cl-] = e^0.378M[Cl-] = 1.46 MTherefore, the concentration of chloride ions in the solution is 1.46 M.
To know more about concentration visit:
https://brainly.com/question/13872928
#SPJ11
Estimate properties and pipe diameter Determine the diameter of a steel pipe that is to carry 2000 gal/min of gasoline with a pressure drop of 5 psi per 100 ft of horizontal pipe. Pressure drop is a function of flow rate, length, diameter, and roughness. Either iterative methods OR equation solvers are necessary to solve implicit problems. Total head is the sum of the pressure, velocity, and elevation. What is the density of gasoline
Answers
Answer:
Diameter of pipe is 0.535 ft
Explanation:
see attachment, its works out 1st half
A circuit designer intending to operate a MOSFET in saturation is considering the effect of changing the device dimensions and operating voltages on the drain current /D. Specifically, by what factor does /p change when the drain-to-source voltage is doubled. Ignore channel-length modulation.
a No change
b 1
c 2
d 8
e 4
f 16
Answers
A circuit designer intending to operate a MOSFET in saturation is considering the effect of changing the device dimensions and operating voltages on the drain current /D. Specifically, by what factor does /p change when the drain-to-source voltage is doubled.Therefore, when the drain-to-source voltage is doubled, there is no change in the drain current (ID). The correct answer is:
a) No change
In saturation region, the drain current (I_D) in a MOSFET is given by:
I_D = (1/2) * k_n * (W/L) * (V_GS - V_t)^2
where k_n is the process-dependent transconductance parameter, W/L is the ratio of the width to the length of the MOSFET channel, V_GS is the gate-source voltage, and V_t is the threshold voltage.
In this equation, we see that I_D is not directly dependent on the drain-source voltage (V_DS). Therefore, doubling V_DS will not change the drain current in the saturation region of operation. Hence, the answer is (a) No change.
To know more about MOSFET visit:
https://brainly.com/question/15146615
#SPJ11
What is the purpose of the lines painted on the shop floor?
Answers
Define the limitations in the operation conditions of a P-N junction
Answers
Answer:
1. Maximum forward current
2. Peak inverse voltage
3. Maximum power rating
Explanation:
The limitations in the operations of a P-N junction are as stated below.
Every P-N junction has limiting values and will give better performance if operated within this values, and if this values are exceeded the P-N junction may be destroyed
1. Maximum forward current: the highest instantaneous current the P-N junction can conduct without being destroyed
2. Peak inverse voltage: the maximum reserve voltage that can be applied without destroying the P-N junction
3. Maximum power rating: the maximum power that can be dissipated at the junction without damaging it
The National Weather Service has issued an alert for a severe storm that will bring 100 mm of rainfall in one hour. A farmer in the area is trying to decide whether to sand bag the creek that drains the 40 acres of row crops. The soil for the drainage area is a sandy clay loam and has a porosity of 0.398, effective porosity of 0.330, suction pressure of 52.3 cm, a hydraulic conductivity of 0.25 cm/hr and an effective saturation of 90%. Assuming that ponding occurs instantaneously, estimate the total depth of direct runoff in mm from the event using the Green-Ampt infiltration model.
a. 80
b. 89
c. 76
d. 72
Answers
A circuit diagram for a lighting circuit is shown in Figure 6.
Figure 6
230 V AC
A
RL1
+
B T 12 V
04
4
Explain the function of the relay RL1 in the lighting circuit shown in Figure 6.
[2 marks)
Answers
Answer:
is there a picture of the figure?
Consider a condenser in which steam at a specified temperature is condensed by rejecting heat to the cooling water. If the heat transfer rate in the condenser and the temperature rise of the cooling water is known, explain how the rate of condensation of the steam and the mass flow rate of the cooling water can be determined. Also, explain how the total thermal resistance R of this condenser can be evaluated in this case.
Answers
Answer:
Q = [ mCp ( ΔT) ] \(_{cooling water }\)
(ΔT)\(_{cooling water}\) and Q is given
\(m_{cooling water}\) = \(\frac{Q}{Cp[ T_{out} - T_{in} ] }\)
next the rate of condensation of the steam
Q = [ m\(h_{fg}\) ]\(_{steam}\)
\(m_{steam} = \frac{Q}{h_{fg} }\)
Total resistance of the condenser is
R = \(\frac{Q}{change in T_{cooling water } }\)
Explanation:
How will the rate of condensation of the steam and the mass flow rate of the cooling water can be determined
Q = [ mCp ( ΔT) ] \(_{cooling water }\)
(ΔT)\(_{cooling water}\) and Q is given
\(m_{cooling water}\) = \(\frac{Q}{Cp[ T_{out} - T_{in} ] }\)
next the rate of condensation of the steam
Q = [ m\(h_{fg}\) ]\(_{steam}\)
\(m_{steam} = \frac{Q}{h_{fg} }\)
Total resistance of the condenser is
R = \(\frac{Q}{change in T_{cooling water } }\)
Rank the following iron–carbon alloys and associated microstructures from the highest to the lowest tensile strength:
(a) 0.25 wt%C with spheroidite,
(b) 0.25 wt%C with coarse pearlite,
(c) 0.60 wt%C with fine pearlite, and
(d) 0.60 wt%C with coarse pearlite.
Answers
Answer:
adcb i believe the answer is
given a string s of characters, a subsequence of s, defined by the indices i 1, i 2, ..., i m , is said to be a repeated subsequence if you can find another sequence of indices j 1, j 2, ..., j m, such that s[i k]
Answers
Answer:
= s[j k] for all 1 <= k <= m.
In other words, a repeated subsequence is a sequence of characters within the original string that appears in the same order at least twice. The indices i1, i2, ..., im refer to the positions of the characters in the original string that make up the repeated subsequence, and the indices j1, j2, ..., jm refer to the positions of the same characters in the second occurrence of the repeated subsequence.
Sound cards have a __________ to help analog devices connect and communicate with the computer
Answers
Sound cards have a audio interface to help analogy devices connect and communicate with the computer.
What is analogy devices?Analogy devices are figures of speech that compare two unrelated things in order to make a point. They are used to explain a concept or idea by using a comparison that is easier to understand. Analogy devices are used to help people better understand the concept being discussed and can be used in speeches, essays, literature, and other forms of communication. An example of an analogy device is the phrase “time is money” which compares two different objects in order to explain that time is valuable and should be used wisely. Analogy devices are helpful in making complex ideas easier to comprehend.
To learn more about analogy devices
https://brainly.com/question/15205145
#SPJ1
How is TEL (total equivalent length) measured and calculated? .
Answers
The trolley travels at the constant speed of 40 mi/h along a parabolic track described by y = x2/500, where x and y are measured in feet. Compute the acceleration of the trolley when it is (1) at point O; and (2) at point A.
Answers
At point O, the trolley is at the bottom of the parabolic track, where y = 0. Therefore, the position vector of the trolley is given by r = xi, where i is the unit vector in the x-direction. The velocity vector of the trolley is given by the derivative of the position vector with respect to time:
v = dr/dt = (d/dt)(xi) = (dx/dt)i
Since the trolley is traveling at a constant speed of 40 mi/h, its velocity vector has a magnitude of 40 mi/h. To find the x-component of the velocity vector, we can use the fact that the speed is constant:
40 mi/h = |v| = sqrt[(dx/dt)^2]
Solving for dx/dt, we get:
dx/dt = 40/sqrt(mi^2/h^2) = 40/5280 ft/s
Therefore, the velocity vector of the trolley at point O is given by:
v = (40/5280)i ft/s
Taking the derivative of the velocity vector with respect to time, we get the acceleration vector:
a = dv/dt = (d/dt)(40/5280)i = 0
Therefore, the acceleration of the trolley at point O is zero.
At point A, the position vector of the trolley is given by:
r = xi + (x^2/500)j
where j is the unit vector in the y-direction. To find the velocity vector of the trolley, we need to take the derivative of the position vector with respect to time:
v = dr/dt = (d/dt)(xi) + (d/dt)((x^2/500)j)
The x-component of the velocity vector is given by:
dx/dt = 40 mi/h = 40/5280 ft/s
The y-component of the velocity vector is given by:
(dy/dt)j = (d/dt)((x^2/500)j) = (2x/500)(dx/dt)j
At point A, x = 200 ft (since y = x^2/500 = 40000/500 = 80 ft at point A), so we can compute the y-component of the velocity vector:
(dy/dt)j = (2x/500)(dx/dt)j = (2*200/500)(40/5280)j = (16/1320)j ft/s
Therefore, the velocity vector of the trolley at point A is given by:
v = (40/5280)i + (16/1320)j ft/s
Taking the derivative of the velocity vector with respect to time, we get the acceleration vector:
a = dv/dt = (d/dt)((40/5280)i) + (d/dt)((16/1320)j)
The x-component of the acceleration vector is zero, since the speed of the trolley is constant:
(d/dt)((40/5280)i) = 0
The y-component of the acceleration vector is given by:
(d/dt)((16/1320)j) = (d/dt)((2x/500)(dx/dt)j) = [(2/500)(d^2x/dt^2) + (2/500)(dx/dt)^2]j
To find the second derivative of x with respect to time, we can use the fact that the speed is constant:
When recharging electric cars it's important that the source of electrical energy be sustainable to avoid: A. higher maintenance costs
B. creating bottlenecks in the electrical grid system C. creating elsewhere pollution" by using coal or other non-sustainable energy sources for recharge D. overcharging the batteries
Answers
When recharging electric cars, it's important that the source of electrical energy be sustainable to avoid creating elsewhere pollution (option C) by using coal or other non-sustainable energy sources for recharge.
Using sustainable energy sources minimizes the overall environmental impact of electric cars and supports a cleaner, greener future. The use of sustainable energy is important for reducing greenhouse gas emissions and mitigating climate change, as well as promoting energy independence and security. Sustainable energy also offers numerous economic benefits, such as job creation, reduced energy costs, and increased economic growth.
To encourage the use of sustainable energy, governments and organizations around the world are implementing policies and programs that promote the development and use of renewable energy sources.
Learn more about sustainable energy: https://brainly.com/question/79953
#SPJ11
why was the Internet originally designed?
Answers
The average repair cost of a microwave oven is 55$, with a standard deviation of 8$. the costs are normally distributed. If 12 ovens are repaired, find the probability that the mean of the repair bills will be greater than 60$.
Answers
The probability that the mean of the repair bills for 12 microwave ovens will be greater than $60 is 0.015 or about 1.5%.
What is Probability?The distribution of the sample means for repair costs of 12 microwave ovens can be approximated to a normal distribution, with a mean of the population repair cost, μ = $55 and a standard deviation of the sample mean, σ/√n = $8/√12 ≈ $2.31.
We need to find the probability that the sample mean is greater than $60. Using the formula for z-score:
z = (x - μ) / (σ / √n)
= (60 - 55) / (2.31)
≈ 2.16
We can look up the area under the standard normal distribution curve for z-score 2.16 in a z-table or calculate it using software. The probability is approximately 0.015.
Therefore, the probability that the mean of the repair bills for 12 microwave ovens will be greater than $60 is 0.015 or about 1.5%.
Learn more about probability on:
https://brainly.com/question/30034780
#SPJ1
A light string can a station- support ary hanging load before of 25.0 kg breaking. An object of mass m = 3.00 kg attached to the string rotates on a friction- less, horizontal table in a circle of radius 0.800 m, and the other end of the T Figure P6.1 string is held fixed as in Figure P6.1. What range of speeds can the object have before the string breaks?
Answers
The magnitude of the velocity vector represents the object's current speed.The velocity vector points in the same general direction as the motion of the object.
What speed range is the object capable of before the string snaps?The vector quantity velocity (v), denoted by the equation v = s/t, quantifies displacement (or change in position, s), over change in time (t).
A hanging mass of 25 kg will exert a force of:
25 * 9.81 = 254.25 Newtons on the string
Thus, during rotation, the force exerted should remain less than this. Force on an object in circular motion is given by:
F = (m * v^2) / r
F = mv2/r = 3.0(v2)/0.8 = (25)9.8 = 245
v = sqrt(245 x 0.8 / 3.0) = 8.1 m/s
v is from 0 to 8.1 m/s
Thus, the magnitude of the velocity should not exceed 8.1 meters per second.
To learn more about vector quantity velocity refer
https://brainly.com/question/1846264
#SPJ9
Which two notations are usable nibble boundaries when subnetting in IPv6? (Choose two.)
Answers
Both /64 and /48 are usable nibble boundaries in IPv6 subnetting because they align with the 4-bit (nibble) structure of an IPv6 address, allowing for efficient allocation and management of the address space. In the context of IPv6 subnetting, two usable nibble boundaries are:
1. /64: This is the most typical IPv6 subnet border because it gives devices inside the subnet a lot of address space, making it appropriate for a variety of network sizes.
2. /48: This limit is frequently used by Internet Service Providers (ISPs) or larger organisations as nibble boundaries. It strikes a balance between the quantity of available subnets and the size of each subnet's address space.
The four most important bits of a byte within a computer system are known as the upper nibble. Eight bits make up a byte, with the first four bits being referred to as the upper nibble. "Nibble" is derived from "nybble," which stands for a half-byte or four bits. The upper nibble is commonly used in programming to manipulate bits, including bitwise operations, number encoding, and several other activities.
Learn more about nibble boundaries here
https://brainly.com/question/31041727
#SPJ11
Create a program inrange.py that has a function that takes one integer argument. The function will print a list of all values between 3000 and 5000 that is divisible by: the integer argument the integer argument + 7 the integer argument ^ 2
For example, if the integer argument is 6, it should print:
[3276, 3744, 4212, 4680]
Answers
One integer, num, is required as an argument for the function inrange. It creates a result list from scratch. Next, using a for loop using the range function, it loops through each integer between 3000 and 5000.
How can I use Python to create a list of random numbers between 1 and 100?print(random()) # Produce a number between 0 and 1 using pseudo-randomness. rundint(1, 100) print # Choose a number at random between 1 and 100. randint = x (1, 100) # Choose a number at random between 1 and 100.
defining in range(num):
I in the range (3000, 5001) has a result of []:
If (i% (num+7)) == 0 and (i% (num**2)) == 0 then the outcome will be.
in range append(i) print(result) (6)
To know more about loop visit:-
https://brainly.com/question/30706582
#SPJ1
The strategies to meet the indoor air quality credit requirements reflect the ___ category knowledge domain of indoor air quality.
Answers
The strategies to meet the indoor air-quality credit requirements reflect the management category knowledge domain of indoor air quality.
Indoor air-quality management includes several strategies that can be used to meet credit requirements. The following are some of the strategies that can be used to improve indoor air quality in buildings:
Develop an Indoor Air Quality Management Plan: This plan should include specific goals and procedures for maintaining and improving indoor air quality. It should include a regular inspection and maintenance schedule for ventilation systems, air filters, and other indoor air quality features.Air filtration: Clean and filter the air in the building by using effective filters. Filters should be regularly cleaned or replaced to ensure their effectiveness.Ventilation: Ensure adequate ventilation in the building by increasing the amount of outdoor air entering the building or by using mechanical ventilation systems. These systems should be regularly inspected and maintained.Cleaning: Regular cleaning and maintenance of the building can help to reduce indoor air pollutants. Use environmentally friendly cleaning products and practices when possible, and ensure that cleaning staff is properly trained on best practices.Monitoring: Regularly monitor indoor air-quality in the building to ensure that levels of pollutants are kept at a minimum. Monitoring should be done by a qualified professional using appropriate equipment.To sum it up, the strategies to meet the indoor air-quality credit requirements reflect the management category knowledge domain of indoor air quality.
To learn more about air-quality:
https://brainly.com/question/1211889
#SPJ11
How do birds achieve take-off, gliding, dive, etc.? How do they modify their body shape?