The mass of the nickel deposited is 5.87 g. The correct option is B.
To determine the mass of nickel deposited during the electroplating process, we can use the formula:
mass = (moles of electrons) × (molar mass of nickel) × (Faraday constant)
First, we need to find the moles of electrons. As 1 mole of electrons is equal to 1 Faraday, in this case, 0.200 Faraday of electrical charge corresponds to 0.200 moles of electrons.
Now, we need to find the molar mass of nickel. The atomic mass of nickel (Ni) is approximately 58.7 g/mol.
For the electroplating of nickel from NiSO₄, the balanced equation is:
Ni²⁺(aq) + 2e⁻ → Ni(s)
From the equation, we can see that 1 mole of nickel ions (Ni²⁺) requires 2 moles of electrons to form 1 mole of nickel metal (Ni).
Next, we will calculate the moles of nickel deposited:
moles of Ni = (moles of electrons) / 2
moles of Ni = 0.200 moles / 2 = 0.100 moles
Now we can calculate the mass of the nickel deposited:
mass = (moles of Ni) × (molar mass of nickel)
mass = (0.100 moles) × (58.7 g/mol) = 5.87 g
to know more about electroplating refer here:
https://brainly.com/question/20112817#
#SPJ11
To determine the mass of nickel deposited in the electroplating process, we need to use the equation:
mass of substance = (current x time x atomic mass) / (faraday's constant x valency)
In this case, we know that 0.200 faraday of electrical charge is passed through the solution of NiSO4. We also know that the valency of nickel is 2 (since NiSO4 contains one nickel ion with a +2 charge). The atomic mass of nickel is 58.69 g/mol. Faraday's constant is 96,485 C/mol.
So, plugging in the values we get:
mass of nickel = (0.200 x 1 x 58.69) / (96,485 x 2)
mass of nickel = 0.000608 g
However, the answer options given are in grams, so we need to convert our answer to grams:
mass of nickel = 0.000608 g = 0.608 mg = 0.000000608 g
Therefore, the correct answer is (d) 58.7 g.
In the electroplating of nickel, 0.200 Faraday of electrical charge is passed through a solution of NiSO4. The mass of nickel deposited can be calculated using Faraday's law of electrolysis.
First, we need to find the molar equivalent of 0.200 Faraday of charge. One Faraday is equivalent to the charge of one mole of electrons (approximately 96,485 C/mol). So, 0.200 Faraday is equivalent to 0.200 moles of electrons.
NiSO4 dissociates into Ni²⁺ and SO₄²⁻ ions in the solution. Nickel has a charge of +2, so one mole of nickel ions requires two moles of electrons for reduction (Ni²⁺ + 2e⁻ → Ni).
Since 0.200 moles of electrons are available, the moles of nickel deposited are 0.200 / 2 = 0.100 moles.
Now, to find the mass of nickel deposited, multiply the moles by the molar mass of nickel (58.69 g/mol):
0.100 moles × 58.69 g/mol = 5.87 g
Thus, the mass of nickel deposited is 5.87 g (option B).
Learn more about electrical charge here;
https://brainly.com/question/9194793
#SPJ11
If a swimming pool has a circumference of 25.12 m, what is its radius?
ANSWER
4 m
EXPLANATION
The circumference formula is,
\(C=2\pi r\)Where r is the radius of the circle.
Solving for r,
\(r=\frac{C}{2\pi}\)The circumference of the swimming pool is 25.12m. If we use 3.14 for π,
\(r=\frac{25.12m}{2\cdot3.14}=\frac{25.12m}{6.28}=4m\)The radius of the swimming pool is 4 m.
what is the 2nd minimum thickness of film required? assume that the wavelength of the light in air is 470 nanometers.
The second-order minimum thickness of the film required is 1.41 μm.
The minimum thickness required for a thin film to reflect a given color is half the wavelength of the light in the film material. For a second-order minimum thickness, the formula is given by;
t2=2nλwhere t2 represents the second-order minimum thickness of the film, n is the refractive index of the film material, and λ is the wavelength of the light in air.
If the wavelength of the light in air is 470 nm, then the second-order minimum thickness of the film required is given by;t2=2nλ= 2 × 1.5 × 470 nm = 1410 nm = 1.41 μm.
The second-order minimum thickness of the film required is 1.41 μm.
To know more about wavelength visit:
brainly.com/question/31143857
#SPJ11
the ________ convey(s) information about head position with respect to gravity.
The vestibular system conveys information about head position with respect to gravity.
The vestibular system is a sensory system located in the inner ear. It consists of structures called the vestibular apparatus, which includes the semicircular canals and the otolith organs (the utricle and saccule). The semicircular canals detect rotational movements of the head, while the otolith organs detect linear accelerations and the direction of gravity.Within the otolith organs, specialized hair cells are sensitive to changes in head position and acceleration. When the head position changes, such as when tilting, moving, or being subjected to gravity, the orientation of the hair cells is altered. This mechanical displacement of the hair cells triggers signals that are transmitted to the brain via the vestibular nerve.
learn more about gravity here:
https://brainly.com/question/31321801
#SPJ11
PLEASE HELP!! A 2.0 kg moving cart hits a spring with a spring constant 50.0 N/m. Assume the system is frictionless. When the cart has come to rest, how far has the spring compressed?
Explanation:
A spring has a spring constant, (k), of 3 N/m. It is stretched until it is extended by 50 cm. Calculate the elastic potential energy stored by the spring, assuming it is not stretched beyond the limit of proportionality.
First convert centimetres to metres:
50 cm = 50 ÷ 100 = 0.5 m
Then calculate using the values in the question:
Ee=12 k e2
Ee=12×3×0.52
Ee=1.5×0.25
Ee=0.375 J
Timmy throws a ball upward. As it falls, it is caught at the same height as it was thrown. What are the signs of the vertical position, velocity, and acceleration during the downward part of the trajectory of the ball?.
During the downward part of the trajectory of the ball are position is positive, velocity is negative and acceleration is negative.
Briefing:The ball is above the ground for the falling portion of the trajectory, so the position with respect to the ground is positive.
Because the ball descends, its velocity is also in the downward direction and is therefore in the negative.
Gravity causes the ball's acceleration to be downward, hence acceleration is negative.
Describe the vertical position:A position along a vertical axis that is above or below a specific vertical datum is referred to as a vertical position or vertical location. The difference between adjacent vertical places is known as the vertical separation or vertical distance. There are numerous ways to express vertical position using vertical coordinates, including depth, height, elevation, elevation, etc.
To know more about vertical position visit:
https://brainly.com/question/14727430
#SPJ4
Which of the following is not considered a natural science?
A. chemistry
B. psychology
C. biology
D. physics
Please select the best answer from the choices provided
Ο Α
OB
Ο Ο Ο Ο.
ОС
D
Answer:
B. Psycology
Psycology is considered a social science while all the other choices are natural sciences.
Psychology is not considered a natural science. While it deals with the study of the human mind and behavior, psychology is generally classified as a social science rather than a natural science.
What are natural sciences?Natural science is a branch of science that deals with the study of the natural world, including the physical, chemical, and biological aspects of nature. It is a systematic and empirical approach to understanding the natural phenomena that occur in the universe. Natural sciences include subjects such as physics, chemistry, biology, geology, and astronomy, among others.
These sciences use the scientific method to investigate and explain the behavior of the natural world, relying on observation, experimentation, and analysis of data to formulate theories and laws that can explain natural phenomena. Natural science plays a critical role in our understanding of the universe and has contributed immensely to technological advancements in various fields. Therefore, option (B) is correct.
Learn more about natural science, here:
https://brainly.com/question/242581
#SPJ7
Two long, parallel wires are attracted to each other by a force per unit length of 320μ N/m . One wire carries a current of 20.0 A to the right and is located along the line y= 0.500 m . The second wire lies along the x axis. Determine the value of y for the line in the plane of the two wires along which the total magnetic field is zero.
The value of y for the line in the plane of the two wires along which the total magnetic field is zero is 0.1667 m below the upper wire .
The force per unit length between two parallel thin current-carrying \(I_1\) and \(I_2\) wires at distance ' r ' is given by \(f=\frac{u_0I_1I_2}{2\pi r}\) ....(1) The field between parallel wires will be zero only if the current is flowing in both wires in the same direction, and the force between them will be the attractive force.It is given that force per unit length is 320μ N/m and one wire carries a current \((I_1)\) of 20.0 A and is located along the line y= 0.500 m .
Putting above values in equation (1) , we get
\(320\times10^{-6}=\frac{4\pi \times10^{-7}\times20.0\times I_2}{2\pi \times0.500}\\\ \\320\times10^{-6}=\frac{4 \times10^{-5}\times I_2}{5}\\\\I_2=\frac{320\times10^{-6}\times5}{4 \times10^{-5}} \\\\I_2=40A\)
Now the magnitude of the magnetic field at a distance "a" due to long current carrying is given by
\(B=\frac{u_0I}{2\pi a}\)
The direction of this magnetic field is given by the right-hand rule of thumb of holding the wire in the right hand, with the outstretched thumb pointing in the direction of current flow and the direction of curled fingers pointing in the direction of magnetic field circulation. of wire.
Hence, field due the wire has an outward direction from the top side of the wire to the bottom side of the wire. Thus, the field is added, above the upper wire comes out of the paper for two wires and enters the paper below the lower wire.
Between the two wires, due to top wire magnetic field is in the paper and due to the bottom wire magnetic field is outside so it is subtracted. The magnetic field is zero here.
Let the resultant magnetic field is zero at a distance x below the upper wire and then magnitude of the field at this distance due to both field must be equal and opposite and is given by
\(B=\frac{u_0I_1}{2\pi x} -\frac{u_0I_1}{2\pi (r-x)} \\\\0=\frac{u_0I_1}{2\pi x} -\frac{u_0I_1}{2\pi (r-x)} \\\\\frac{u_0I_1}{2\pi x} =\frac{u_0I_1}{2\pi (r-x)} \\\\\frac{I_1}{x} =\frac{I_2}{r-x} \\\\\frac{20}{x} =\frac{40}{0.500-x} \\\\20(0.500-x)=40x\\\\10-20x=40x\\\\10=60x\\\\\x=\frac{10}{60} \\\\x=0.1667m\)
Learn about force per unit length more here :
brainly.com/question/15071504
#SPJ4
The rotation curve of a galaxy can be used to determine Group of answer choices the relative number of hot young stars in the galaxy. the relative amount of gas and dust in the galaxy. the radius of the galaxy. the luminosity of the galaxy. the mass of the galaxy.
The rotation curve of a galaxy can be used to determine the mass of the galaxy. The rotation curve describes how the speed of stars or gas in the galaxy changes with distance from the center of the galaxy. Option D.
By measuring the rotation curve and assuming that the galaxy is held together by gravity, astronomers can estimate the distribution of mass within the galaxy. This includes the mass of visible stars, gas, and dust, as well as any dark matter that may be present. Therefore, the correct answer is: the mass of the galaxy.
Learn more about rotation curve
https://brainly.com/question/31453598
#SPJ4
Full Question ;
The rotation curve of a galaxy can be used to determine Group of answer choices the relative number of hot young stars in the galaxy.
the relative amount of gas and dust in the galaxy.
the radius of the galaxy.
the luminosity of the galaxy.
the mass of the galaxy.
from t=0 onwards, what happens to the voltage v(t) across the inductor and the current i(t) through the inductor relative to their values prior to t=0 ?
At t=0, the voltage v(t) across the inductor and the current i(t) through the inductor experience an abrupt change and may become discontinuous, as the initial energy stored in the inductor is released and the current and voltage begin to change from their initial values.
More specifically, prior to t=0, the current i(t) was assumed to be zero, and the voltage v(t) across the inductor was also zero, as there was no change in current flowing through the inductor. However, at t=0, when the voltage source is connected to the circuit, the current starts to flow, and the voltage across the inductor changes abruptly, leading to a change in current.
The amount of change in current and voltage depends on the inductance of the inductor and the other circuit parameters. In general, the current and voltage may oscillate or decay towards steady-state values depending on the circuit parameters.
To learn more about inductor, here
https://brainly.com/question/15893850
#SPJ4
A common activity like cooking a meal can use many natural _________.
A common activity like cooking a meal can use many natural Ingredients
Ingredients
Ingredients are substances combined to make a particular mixture such as a meal. most of the ingredients used for the preparation of a meal are sourced naturally.
In cooking different recipes of a meal the use of specific ingredients for each recipe differentiates the recipes.
Therefore we can conclude that cooking a meal requires the use of natural ingredients.
Learn more about cooking ingredients : https://brainly.com/question/1119876
Please answer the question below. No files, No Docs, or any Link. ONLY REAL ANSWER. Whoever, answers this question will get 50 points plus a 5 star rated.
Voting is a fundamental right in our democracy and the attendees at Boys State understand this. How would you describe this responsibility to someone who says they never vote because it doesn’t make any difference?
Answer: i don’t know maybe later i will ask thAT question
Explanation:
An electron’s position cannot be known precisely. only its probability of being in a certain location can be known. bohr model einstein’s model electron cloud model
An electron’s position cannot be known precisely. only its probability of being in a certain location can be known as c. the electron cloud model.
Electron cloud model was developed in the 1920s by Erwin Schrödinger and Werner Heisenberg, and it is based on the idea that an electron does not have a definite location, but rather exists in a probability distribution around the nucleus of an atom.
In the electron cloud model, the probability of finding an electron in a certain location is represented by a cloud-like shape around the nucleus. The denser the cloud, the greater the probability of finding an electron in that area. This model is different from the Bohr model, which depicts electrons as orbiting the nucleus in fixed, circular paths. The electron cloud model is also different from Einstein's model, which does not specifically address the position of electrons.
In summary, the electron cloud model is the model that describes an electron's position as a probability rather than a precise location. It is different from the Bohr model and Einstein's model, and it is based on the idea that an electron exists in a probability distribution around the nucleus of an atom.
Learn more about electron cloud model at:
https://brainly.com/question/18220861
#SPJ11
Answer:
the electron cloud model.
Explanation:
You row a boat perpendicular to the shore of a river that flows at 3 m/s. The velocity of your boat is 4 m/s relative to the water. What is the velocity of your boat relative to the shore?
Answer:
The velocity vBW of the boat relative to the water is 4.0 m/s, directed perpendicular to the current, as in Figure 3.18.
Explanation:
The boat is perpendicular to the shore. Then the net velocity of the boat with respect to river is 5 m/s. The observer feels like the boat is moving slower than they appear actually.
What is relative velocity ?Relative velocity is velocity of an object measured with respect to other object which can be of stationary or moving with a speed. Thus speed relative to another object is called the relative velocity.
The relative velocity is what's the speed for an observer but it differs from actual velocity. Sometimes it may slower or faster depending on the object with which a we are relating the speed.
Given that the speed of the boat = 4 m/s
speed of river = 3 m/s.
Both are perpendicular and the net velocity of the boat is :
r = √(3² + 4²) = 5 m/s.
Hence, the velocity of the boat relative to the shore will be 5 m/s.
Find more on relative velocity :
https://brainly.com/question/29655726
#SPJ2
if the raindrop comes to rest in 0.37 ms , what is the magnitude of the average force of the impact?
a) The magnitude of the impulse delivered to your roof is 1.13 × 10^-4 Kg m / s
b) The magnitude of the average force of the impact is 0.37 N.
a) Impulse is defined as the change in moment of object . The total impulse on an object is measured from the product mass of the object and the total change in velocity of the object. Impulse is a vector quentity so it has both magnitude as well as direction (negative or positive sign). Units of impluse in S.I system , Newton seconds, or N∗s.
Mathematically , J =m× v
v --> change in velocity which is equal to final velocity of object and substracting staring velocity.
m---> mass of object
We have, mass of raindrop (m) = 0.014 g = 0.014×10⁻³kg
the speed of raindrop (v) = 8.1 m/s
putting all values in above formula we get,
J = mv = 0.014×10⁻³ × 8.1 = 0.013 × 10⁻³ kg m/s
thus, value of impluse is 0.013×10⁻³3 kg m/s
b) Average force of impact is defind as the product of mass of object by the average velocity of object over a definite time.
According to Newton's Second law of motion,
force (F) = m× a
where m---> mass of object
a----> acceleration which is equal to change in velocity with respect to time.
Now, we have given m = 0.014 ×10⁻³3 kg
time = 0.37 ms
acceleration (a) = v/t = ( 8.1 m/s )/ 0.37 ms
putting all values in above formula we get,
force = (0.014×10⁻³kg × 8.1 m/s )/0.37 ×10⁻³ s
= 0.306N ~ 0.31N
Thus, magnitude of average force of impact is 0.31 N .
To learn more about Impluse and force , refer:
https://brainly.com/question/22296861
#SPJ4
#Complete question:
A large raindrop - the type that lands with a definite splat - has a mass of 0.014 g and hits your roof at a speed of 8.1 m/s.
Part A) What is the magnitude of the impulse delivered to your roof? Express your answer with the appropriate units.
Part B) If the raindrop comes to rest in 0.37 ms, what is the magnitude of the average force of the impact? Express your answer with the appropriate units.
a car has a velocity of 87 km/hr to the east. What is its displacement if it travels at this velocity for 30 minutes?
Answer:
displacement = 43.5 km
Explanation:
displacement = velocity * time taken
Here speed is 87 km/hr, which is given in km per hour
So we need to change the given time to hours:
60 minutes = 1 hours
30 minutes = 0.5 hours
Then using the formula lets find displacement:
displacement = velocity * time taken
displacement = 87 km/hr * 0.5
displacement = 43.5 km
a square loop whose sides are long is made with copper wire of radius , assuming resistivity of copper is . if a magnetic field perpendicular to the loop is changing at a constant rate of , what is the current in the loop?
A square loop whose sides are long is made of copper wire of radius , given the resistivity of copper is . if the magnetic field perpendicular to the loop changes at a constant rate of I = 14.029 mA.
The basic characteristic of a substance that measures how effectively it resists an electric current is called electrical resistance. A material with low resistance is a material that easily conducts electric current. A Greek letter is often used to indicate resistivity. Electrical resistance is a basic property of a material that measures how strongly it resists an electric current. The SI unit for electrical resistance is the ohmmeter.
We use magnetic field as a tool to describe how the magnetic field is distributed in the space around and inside something of a magnetic nature. A material with low resistance is a material that easily conducts electric current. A Greek letter is often used to indicate resistivity. An ohmmeter is a unit of electrical resistance in the SI system.
Learn more about magnetic field here;
https://brainly.com/question/24397546
#SPJ4
The complete question is :
A square loop whose sides are 6.0-cm long is made with copper wire of radius 1.0 mm. If a magnetic field perpendicular to the loop is changing at a rate of 5.0 mT/s, what is the current in the loop?
Which change will cause the gravitational force between a baseball and a soccer ball to increase?
Removing the outer layer of the baseball
Moving the balls father apart
Wrapping the soccer ball in layers of duct tap
Using a baseball with a thinner leather
If you keep them exactly the same distance apart, then wrapping the soccer ball in layers of duct tap will increase he gravitational force between them, because the mass of the soccer ball will increase slightly.
The gravitational force between the baseball and a soccer ball will increase by wrapping the soccer ball in layers of duct tap.
The given problem is based on the concept and fundamentals of gravitational force. The force come into play between the objects on Earth and Earth itself on account of gravity, is known as the gravitational force.
Now considering the given problem, the mathematical expression for the gravitational force is,
\(F = \dfrac{G \times m \times M}{r^{2}}\)
Here,
G is the universal gravitational constant.
m is the mass of baseball.
M is the mass of Soccer ball.
r is the distance between the baseball and Soccer ball.
Clearly, the gravitational force is directly proportional to the masses of Baseball and soccer ball and inversely proportional to the square of distance between them.
So, in order to increase the gravitational force, we need to bring both the balls closer because the masses of each balls remains constant. And this is achieved by wrapping the soccer ball in layers of duct tap.
Thus, we can conclude that the gravitational force between the baseball and a soccer ball will increase by wrapping the soccer ball in layers of duct tap.
Learn more about the gravitational force here:
https://brainly.com/question/25996587
if the radius of the cd below is 6.0 cm and the angular velocity is 5.0 rad/s, what is its angular displacement in 2.0 s? AND linear displacement
Angular displacement: 10 rad.
linear displacement: 60 cm
What is angular velocity?In basic terms, angular velocity is the pace at which an item rotates or circles around an axis in time. "ω" is a Greek letter that stands in for angular velocity. Radians per second is the SI unit for angular velocity since it is expressed as an angle per unit of time.
Given that,
Radius of the CD below is 6.0 cm
Angular velocity is 5.0 rad/s.
As we know, angular displacement, (θ) = ω × t
or, θ = 5.0 rad/s × 2.0 sec
or, θ = 10 rad.
Next, linear displacement, (S) = R × θ
or, S = 6 cm. × 10 rad
or, S = 60 cm
To know more about angular displacement refer to:
https://brainly.com/question/13665036
#SPJ1
a voltage is applied to a resistor which creates a 1.50 a current. if you double the voltage, keeping the resistance the same, what will the new current be?
Answer: 3.00 A
Explanation: The relationship between Voltage, current and resistance is given by the formula V = IR.
By keeping the resistance constant, the voltage is then proportional. This means that by doubling the voltage, the current will also have to be doubled, to satisfy the equation.
(make sure everything is kept in SI units!)
how much energy must be transferred into 2kg of iron to raise its temperature by 5C?
Answer:
Explanation:
Around 500 volt energy
you are driving your car in a circle and also speeding up. where does your total acceleration vector point?
When you are driving your car in a circle and speeding up, your total acceleration vector points towards the center of the circle.
What is acceleration?Acceleration is the change in velocity of an object with time. An object's acceleration is calculated by dividing the change in velocity by the time taken for that change to occur. When an object accelerates, the velocity's direction changes, even though the speed remains constant.
When an object accelerates, it can move in a straight line, but it can also move in a curve or circle, which is a case of circular motion. The acceleration of an object moving in a circular path is given by the net force, which acts on it, and it always points towards the center of the circle.
The direction of the acceleration vector for an object moving in a circular path is always towards the center of the circle. Hence, in the given scenario, when you are driving your car in a circle and speeding up, your total acceleration vector will point towards the center of the circle.
Learn more about Acceleration here: https://brainly.com/question/26246639
#SPJ11
a professor drives off with his car (mass 850 kg), but forgot to take his coffee mug (mass 0.3 kg) off the roof. the coefficient of static friction between the mug and the roof is 0.7, and the coefficient of kinetic friction is 0.5. what is the maximum acceleration of the car, so the mug does not slide off?]
The maximum acceleration of the car so the mug does not slide off is 6.861 m/s².
To find the maximum acceleration of the car so the mug does not slide off, follow these steps:
1. Determine the maximum static friction force between the mug and the roof using the formula:
static friction force = coefficient of static friction * normal force.
In this case, the normal force is equal to the weight of the mug (mass * gravity), so the formula becomes:
static friction force = 0.7 * (0.3 kg * 9.81 m/s²).
2. Calculate the static friction force: 0.7 * (0.3 kg * 9.81 m/s²) = 2.0583 N.
3. Determine the maximum acceleration by dividing the static friction force by the mass of the mug: maximum acceleration = static friction force / mass of the mug = 2.0583 N / 0.3 kg.
4. Calculate the maximum acceleration: 2.0583 N / 0.3 kg = 6.861 m/s².
For more details about acceleration click here:
https://brainly.com/question/12550364#
#SPJ11
Sally drove from New York to Washington and back again. She
averaged 50 mph on the way and 60 mph on the way back. The round
trip took her 18 hours. How far apart are the two cities?
Sally drove from New York to Washington and back again. The distance between New York and Washington is 490.91 miles.
The average speed is = Distance/time,
x/50 + x/60 = 18
6x/300 + 5x/300 = 18
11x / 300 = 18
11x = 18 × 300
11x = 5400
x = 5400 / 11
x = 490.91 Miles.
Hence, the distance between New York and Washington is 490.91 miles.
To know more about the distance:
https://brainly.com/question/30510042
#SPJ4
A trumpet plays its 3rd harmonic at 510 Hz. It then opens a valve, which adds 0.110 m to its length. What is the new 3rd harmonic frequency? (Hint: Find the original length.) (Speed of sound = 343 m/s) (Unit = Hz)
Answer:
f = 459.8 Hz
Explanation:
When a trumpet is playing it is an open tube at both ends, therefore there is a belly in each one, the resonance occurs to
λ = 2L 1st harmonic
λ = 2L /2 2nd harmonic
λ = 2L /3 3rd harmonic
the speed of the wave is
v = λ f
λ = v / f
we substitute in the third harmonic
\(\frac{v}{f} = \frac{2L}{3}\) (1)
L = \(\frac{3}{2} \ \frac{v}{f}\)
L = \(\frac{3}{2} \ \frac{343}{ 510}\)
L = 1.009 m
indicates that to add ΔL = 0.110 m, so the total length is
L_total = L + ΔL
L _total = 1.009 + 0.110
L _total = 1,119 m
we use equation 1
f = \(\frac{3}{2} \ \frac{v}{L_{total}}\)
f = \(\frac{3}{2} \ \frac{343}{1.119}\)
f = 459.8 Hz
As the volume of a gas increases, its pressure
(Assume all other factors are held constant).
Which other subatomic particle has the same mass as a neutron
Answer:
.................... protons :)
Answer:
protons
The two subatomic particles that have the same mass are protons and neutrons.
what is the distance δz between two surfaces separated by a potential difference δv?
The distance δz between two surfaces separated by a potential difference δv is given by the equation δz = εAδv/Q, where A of plates, the charge stored Q, and permittivity ε of material between the plates.
The distance δz between two surfaces separated by a potential difference δv can be determined using the equation for capacitance. Capacitance is a property of a system that relates the potential difference across it to the amount of charge it can store. The formula for capacitance is given by C = Q/δv, where C represents the capacitance, Q is the charge stored, and δv is the potential difference.
If the surfaces are plates of a parallel plate capacitor, the capacitance can be expressed as C = εA/δz, where ε is the permittivity of the material between the plates, A is the area of the plates, and δz is the distance between them. By equating the two equations for capacitance, we can solve for δz:
εA/δz = Q/δv
Rearranging the equation, we find δz = εAδv/Q. This equation relates the distance δz between the surfaces to the potential difference δv, the area A of the plates, the charge stored Q, and the permittivity ε of the material between the plates.
Learn more about permittivity here:
https://brainly.com/question/30403318
#SPJ11
a spoon can appear broken in a glass of water due to the wave interaction known as
The wave interaction that can cause a spoon to appear broken in a glass of water is called refraction.
Refraction occurs when a wave, such as light, passes from one medium to another with a different density or refractive index. When light waves travel from air into water, for example, they undergo a change in direction due to the change in speed caused by the difference in optical properties between the two mediums.
In the case of the spoon in a glass of water, the light waves coming from the spoon encounter the air-water interface. As they pass from air into water, they undergo refraction, causing a change in their direction. This change in direction can create an optical illusion where the spoon appears to be bent or broken at the water's surface.
This phenomenon is a result of the bending of light rays as they pass through different mediums with different refractive indices, and it is a common example of how refraction can distort the perception of objects when viewed through different mediums.
To know more about the wave interaction refer here :
https://brainly.com/question/29767263#
#SPJ11
Jeff was struggling with his agggressive behavior. Throughout high school he often found himself in fights. Five years after high school he became an Extreme Sports contender. He channeled his agression and is happily married with a calmer personality outside the ring.
Any action intended to hurt, harm, or cause suffering to another living thing or group of beings is considered to be aggressive.
What causes harm?Specifically, acts that injure someone physically. action that harms psychological health, such as that which instills apprehension, concern, or anguish.When you hurt your brother, you also hurt him. One way to damage someone is to hurt them physically.
Distress: What is it?People who are distressed could also believe that they are unable to handle or cope with alterations brought on by everyday activities or medical conditions like cancer. It is unfavourable, unhealthy, and discouraging. Stressors events that trigger the stress reaction in our bodies. A stressor is anything that creates stress.
To know more about Distress visit :
https://brainly.com/question/30199431
#SPJ1
Two charged particles near each other are released. As they move, the force on each particle increases. Therefore, the particles haveA) the same sign.B) the opposite sign.C) not enough information
ANSWER
B) the opposite sign
EXPLANATION
The force between charged particles is inversely proportional to the square of the distance between particles, from Coulomb's law:
\(F=k_e\cdot\frac{q_1\cdot q_2}{r^2}\)If the force increases it can mean two things: either one or both particles are gaining charge - which is not the case of this problem, or the distance between them is decreasing. In this case, the distance must be decreasing for the force to increase. This means that the particles are moving towards each other, they are being attracted by each other. Since only particles with opposite signs attract, the answer is option B, they have opposite sign.