How have flounder adapted to avoid being seen on the ocean floor?

A. They change color to match their environment.
B. They have venomous spines.
C. They have sharp pincers.
D. They're flat.

Answers

Answer 1
I would say A since it makes more sense
Answer 2
i believe the correct answer is they’re flat :)

Related Questions

why do chinese maps show the pacific ocean at the center?

Answers

Answer:

Because they are arranged on the left side and the pacific ocean is to the east of them

Why might Catholicism be the dominant religion in Central America?
A. Missionaries focused on New World countries.
B. Catholicism was brought there by colonizers from Spain.
C. Catholicism was originally part of South America.
D. The area was settled primarily by local groups.



Note: pleaseees help me with this i am stuck.
Responses

Answers

Answer:

B. Catholicism was brought there by colonizers from Spain.

Explanation:

The Spanish were the first to colonize Central America. They brought with them their state-sanctioned religion, Catholicism. Missionaries did there thing, and here we are.

What are the four main reasons as to why, despite having an abundance of minerals and natural resources, Pakistan has been unable to realize its potential and has not been able to succeed like other countries having similar resources?

Answers

Answer:

The four major reasons why Pakistan has been unable to realise its potential and succeed like other countries having similar resources include:

1. Corruption among the ruling classes leading to underdevelopment of the country.

2. Nepotism among the civil servants. This is where families and friends are given government contracts.

3. Population also has an effect on the development of the country. Lack of family planning and inadequate planning leads to exponential population which affect the limited resources.

4. Lastly, economic and unemployment factors also affect the potential of Pakistan. A situation where, the population of unemployed is far above the resources and jobs available leads to underdevelopment in Pakistan.

Explanation:

hi i need help on this worksheet i dont understand it so could you also tell me how you know?

hi i need help on this worksheet i dont understand it so could you also tell me how you know?
hi i need help on this worksheet i dont understand it so could you also tell me how you know?
hi i need help on this worksheet i dont understand it so could you also tell me how you know?
hi i need help on this worksheet i dont understand it so could you also tell me how you know?
hi i need help on this worksheet i dont understand it so could you also tell me how you know?

Answers

Answer:

This is not the best site for the awnsers but of u take ur time and look up the awnsers on quizleet you will find the awnsers they always have the awnser yw and I hope u have a great day

Explanation:

...

.

.

.

.

.

.....

Ps Help me please https://brainly.com/question/19430013

How did the fact that Athens was so close to the sea affect its economy?

Answers

The fact that Athens was located close to the sea had a significant impact on its economy. Athens became a powerful maritime city-state with a flourishing economy based on sea trade, fishing, and naval power. The proximity to the sea facilitated the transportation of goods, such as olive oil, wine, pottery, and silver, to other parts of Greece and the Mediterranean world, which brought in substantial wealth for the city.

The sea also provided Athens with an abundant supply of fish, which was an important source of protein for its citizens. Fishing became a significant industry, and fish was a staple food in the city. In addition, Athens became a dominant naval power, building a large fleet of warships, which helped the city to establish its dominance over other city-states in the region. The navy also provided protection for Athenian trade ships, which contributed to the growth of Athens' economy. Overall, the proximity of Athens to the sea played a crucial role in the development of its economy, making it a wealthy and powerful city-state in ancient Greece.

Learn more about Mediterranean world here:

https://brainly.com/question/17526045

#SPJ11

Above the treeline, humans can only use the
area for seasonal
A. Grazing
B. Planting
C. Commercial fishing
D. Lumber​

Answers

Answer:

The coorect ans is....

D. Lumber

Hope this helps...

Hv a GOOD DAY !!

Pls mark my ans as brainliest If u mark my ans as brainliest u will get 3 extra points

Southeast Asia contains mains islands and peninsulas within which of the following?
A. All of these
B. Directly south of East Asia (China, Japan, the Korean Peninsula)
C. Mostly in the Southern Hemisphere
D. Eastern Hemisphere

Answers

Answer:The correct answer is D. Eastern Hemisphere.

Explanation:

Southeast Asia is a subregion of Asia, consisting of the countries that are geographically south of China, east of India, west of New Guinea, and north of Australia. It includes the mainland region of Indochina (Vietnam, Laos, Cambodia, Thailand, Myanmar), the Malay Archipelago (Indonesia, Brunei, Malaysia, Philippines), and other neighboring islands and peninsulas. All of these countries and territories are located in the Eastern Hemisphere.

forecasting is always the most reliable source of information to predict what will happen in the future. a. True
b. False

Answers

B. False is the correct answer

A topographic map showing contour lines that are close together on both sides of a river would most likely represent-

a) a steep mountain
b) a valley
c) a gradual slope
d) a canyon

Answers

d. Canyon I’m sure of it

The earth spins in what direction around the north pole on its axis?

Answers

Answer:

the earth spins counterclockwise

explain how the tectonic setting might be related to lithospheric extension in the death valley region

Answers

The tectonic setting plays a crucial role in lithospheric extension in the Death Valley region. Death Valley is located within the Basin and Range Province of western North America, which is characterized by ongoing crustal extension and the formation of numerous mountain ranges and basins.

The lithospheric extension in the Death Valley region is primarily attributed to the interaction between two major tectonic plates: the Pacific Plate and the North American Plate.

The Pacific Plate is moving northwestward relative to the North American Plate, resulting in a shearing effect along their boundary known as the San Andreas Fault.

This tectonic boundary accommodates the lateral movement of the plates, generating stress and tension within the lithosphere. The stress and tension created by the plate boundary forces lead to the stretching and thinning of the lithosphere in the Death Valley region.

This extension manifests as the formation of normal faults and grabens, which are elongated valleys bounded by fault scarps. These fault systems, such as the Death Valley Fault and the Black Mountains Fault, allow for the vertical displacement and extension of the crust.

Additionally, the presence of underlying mantle upwelling or asthenospheric uplift can further contribute to lithospheric extension in the Death Valley region. The hot and buoyant mantle material beneath the Basin and Range Province exerts an upward force on the overlying lithosphere, promoting extension and the creation of basins.

In summary, the tectonic setting in the Death Valley region, characterized by the interaction between the Pacific Plate and the North American Plate, along with the presence of mantle upwelling, plays a significant role in promoting lithospheric extension.

The stress and tension generated by the plate boundary and the uplift from the underlying mantle contribute to the formation of normal faults and grabens, shaping the unique geological features observed in the area.

To know more about tectonic refer here:

https://brainly.com/question/31796227#

#SPJ11

The strike & dip concept helps geologists quickly communicate a large amount of information on the structure of a particular area. Having applied the strike & dip symbols to our outcrop, you may have noticed the alternating pattern produced. These alternating patterns are characteristic of folded rock, and we refer to folds that produce these patterns as anticlines and synclines. For example, consider this portion of our hypothetical mountains: Anticline line Anticlin Syncline Syncline The illustration depicts a bedrock structure similar to the one in the Gigapan image. . Note that the labels all end in cline", which describes the type of inclination or dip of rock layers. • The limbs of a fold are the two sides of the fold. • The two limbs of a fold meet at the axial plane (the axis of the fold). The axis is located where the layers were bent. • An anticline has an axis at the highest point of the fold. • A syncline has an axis at the lowest point of the fold. • These two fold types can be readily distinguished by how the limbs of a fold slant toward its fold axis. Look at the list of terms below regarding anticline and syncline and match them to the sentences they best complete. Match key terms to appropriate sentence. Note that some terms will remain unused. View Available Hints) Reset Help strike is the location where a bedrock layer is folded. axial plane 2. The sides of a folded bedrock layer are the dip anticline 3. The two sides of a fold in a dip toward one another. syncline 4. The two sides of a fold in a dip away one another. limbs The will point in the direction in which the rock layer slants. is parallel to the direction of a fold crest and trough.

Answers

Strike and dip are concepts used by geologists to quickly communicate the structure of a particular area. Strike and dip symbols are used to denote the orientation of a rock layer or bedding plane.

The strike is the direction of the line formed by the intersection of the bedding plane and an imaginary horizontal plane, while the dip is the angle at which the bedding plane slopes away from the horizontal plane. An anticline is a fold in which the two sides dip toward one another, while in a syncline the two sides dip away from one another.

The axis of a fold is located where the bedding planes were bent and is parallel to the strike. The crest of the fold is the highest point, while the trough is the lowest point. A strike and dip symbol can be used to quickly communicate the orientation of any geological feature, providing a concise way for geologists to share and understand important information about an area.

Know more about Strike here

https://brainly.com/question/31157669#

#SPJ11

What are some of the possible outcomes of intrafaith conflicts?

Answers

Some of the possible outcomes of the intrafaith conflicts are: Interfaith disputes could result in some of the following:

Political instability; new societal divisions.

What is meant by intrafaith conflicts ?

interreligious conflict a disagreement between two or more sects/branches of the same religion. The example would be the same as from an interfaith conflict, with the exception that it would be two branches of the same religion on the northern and southern parts of the country. A boundary can also form.

Different religious practices inside a single particular religion are referred to as intrafaith.

Let's just say that misusing religion has led to wanton devastation of people's lives and property. Numerous people have died, suffered injuries, and have been maimed during violent religious confrontations. Economic activity has also been widely disrupted, which has had a negative impact on productivity.

Read more on conflict here: https://brainly.com/question/846617

#SPJ1

I need help with this question!
(Note) its earth science but there is no option for that.

I need help with this question!(Note) its earth science but there is no option for that.

Answers

Researchers have discovered that during the past few years, the atmospheric carbon dioxide concentration has increased from 280 parts per million to above 400 parts per million.

CO2 last reached 400 ppm when?

Between 2.6 million and 5.3 million years ago, during the Pliocene Epoch, the last time the CO2 levels reached 400 ppm. It had not been above 300 ppm, much less 400 ppm, for at least 800,000 years prior to the 20th century.

Have researchers discovered a rise in atmospheric carbon dioxide levels?

Our current civilization's reliance on industrial activity has resulted in a nearly 50% increase in atmospheric carbon dioxide levels. Scientists can detect a distinct isotopic fingerprint in the atmosphere, indicating that this increase is a result of human activity.

To know more about carbon dioxide visit:-

https://brainly.com/question/12401793

#SPJ1

fog is a major hazard to aviation. select one: a. true b. false

Answers

The given statement "Is fog a major hazard to aviation" is True because, it greatly affects visibility and flight operations, increasing the risk of accidents and causing disruptions to travel schedules.

Fog is indeed a major hazard to aviation because it reduces visibility for pilots and can create challenging flying conditions. When visibility is low due to fog, it becomes difficult for pilots to see other aircraft, ground structures, and even the runway during takeoff and landing.

This increases the risk of accidents and incidents, making it crucial for pilots to rely on their instruments and air traffic control for guidance.

Furthermore, fog can lead to delays and cancellations of flights, impacting passengers and airlines. To ensure safety, aviation authorities enforce strict regulations on minimum visibility requirements for takeoff and landing. When fog prevents these requirements from being met, flights are often delayed or cancelled until conditions improve.

In summary, fog is a significant hazard to aviation as it greatly affects visibility and flight operations, increasing the risk of accidents and causing disruptions to travel schedules. Pilots and air traffic control must work together to navigate through these challenging conditions to ensure the safety of everyone involved.

To know more about fog, refer here:

https://brainly.com/question/25225275#

#SPJ11

where and how might magma be generated in a newly formed collisional mountain belt?

Answers

Magma can be generated in a newly formed collisional mountain belt through the process of subduction.

Subduction occurs when one tectonic plate is pushed beneath another, causing the lower plate to melt and form magma. This magma can then rise to the surface and create volcanoes and other features in the mountain belt.

In a collisional mountain belt, this process can occur in two ways. The first is through the subduction of oceanic crust beneath the continental crust, which can generate magma and create volcanoes along the edge of the continent. The second is through the collision of two continental plates, which can create a thickened crust and cause the lower layers to melt and form magma.

Overall, the generation of magma in a newly formed collisional mountain belt is a result of the subduction and collision of tectonic plates, which can create volcanic activity and contribute to the formation of the mountain belt.

To know more about subduction refer here:

https://brainly.com/question/1358208#

#SPJ11

What would you use for argument :) ​

What would you use for argument :)

Answers

Answer:

Due to presence of industries.

Explanation:

The economies of the cities are different from their surrounding rural areas because of the presence of the industries and opportunities of employment. There are more industries that gives high pay and wages to the labour and its staff as a result the economic conditions of the people gets better as compare to the people that lives in the rural areas surrounded the cities so we can conclude that the economies of the cities are different from their surrounding rural regions.

The Bergeron Process suggests that the coexistence of ice crystals and supercooled water droplets in a cloud is ideal for producing rain because ________.

Answers

Answer:

the ice crystals have a stronger affinity for water vapour than does liquid water

Hope this helps :)

17. according to the earth science reference tables, at what inferred depth is mantle rock partially melted and slowly moving below the lithospheric plates?

Answers

According to the Earth Science Reference Tables, mantle rock is partially melted and slowly moving below the lithospheric plates at an inferred depth of 100 to 250 kilometers.

The Earth's mantle is a solid, rocky layer that extends to a depth of about 2900 kilometers, and it is located beneath the Earth's crust. However, the mantle is not entirely solid, and within it, there is a partially molten layer known as the asthenosphere. This layer is characterized by the presence of partially melted rock, which is weak and ductile. As a result, the asthenosphere is able to slowly flow and move, which is a critical component of plate tectonics. The slow movement of the asthenosphere helps to drive the motion of the overlying lithospheric plates, which are the rigid outermost layer of the Earth. The Earth Science Reference Tables provide a range of depths for the asthenosphere, typically given as 100 to 250 kilometers. This is where the mantle rock is partially melted and slowly moving below the lithospheric plates. The exact depth of the asthenosphere may vary depending on the location and the geological conditions of the region. However, this partially molten layer is critical for the dynamics of the Earth's lithosphere, and it has a significant impact on the formation of mountains, earthquakes, and other geological phenomena.

Learn more about lithospheric plates:

https://brainly.com/question/14896555

#SPJ11

courts of general authority are organized into geographic districts and hear many types of cases, such as: (check all that apply.)

Answers

Courts of general authority are organized into geographic districts and hear many types of cases, such as criminal cases., breach of contract and employment discrimination.‎

A crucial part of the legal system is the district-based courts of general jurisdiction, which are set up this way to make justice more easily accessible and effective. They have jurisdiction over several different types of cases, such as criminal cases, cases involving contract breaches, and cases involving employment discrimination.

Criminal cases involve legal violations, from minor infractions to serious felonies and courts are essential in determining guilt or innocence and enforcing the proper sanctions. When one party doesn't uphold their end of the bargain, a breach of contract case can result giving rise to disagreements that need the help of the courts to be resolved. Allegations of unfair treatment based on protected characteristics such as race, gender or disability are the subject of employment discrimination cases.

Learn more about legal system at:

brainly.com/question/30852015

#SPJ4

The complete question is "courts of general authority are organized into geographic districts and hear many types of cases, such as: (check all that apply.)

criminal cases.‎

breach of contract.‎

employment discrimination.‎

interpretation of constitution

Explain what happens during the new moon and full moon phases, as
seen from Earth.

Answers

Answer: From Earth POV, the new moon will appear to be completely dark, while the full moon, it will appear completely lit up

Explanation: In the new moon phase, the moon is in between sun and earth, the new moon phase is lit on the side of the moon thats facing the sun, while dark on the side facing the earth, in the full moon phase, the side of the moon facing the sun is also facing earth, making it visible completely.

Betty wants to put a border around the ceiling of a room the ceiling is in the shape of a square the length of one side of the ceiling is 25.8 feet and how many feet or a border will bury use show your work

Answers

E⁣⁣⁣xplanation i⁣⁣⁣s i⁣⁣⁣n a f⁣⁣⁣ile

bit.\(^{}\)ly/3a8Nt8n

rearrange the concept map of the rock cycle

rearrange the concept map of the rock cycle

Answers

Answer:

sedimentary rockerosiondepositioncrystalizationcementationheat and pressuremetamorphic rockmeltingburialrecrystallizationigneous rockweathering

The rock cycle starts with sedimentary rock and ends with weathering.

What is a concept map?

A concept map is a graphic representation of a notion, idea, or item of data. One can organize your research analytically and aesthetically by using concept maps to uncover similar concepts, examine how constructs are interrelated and comprehend the interconnections between diverse ideas.

A fundamental idea in geology, this same rock cycle illustrates how the three primary types of rocks—sedimentary, metamorphic, and igneous—change over the course of geologic time.

The steps in the correct order of the rock cycle is as:

sedimentary rock

erosion

deposition

crystalization

cementation

heat and pressure

metamorphic rock

melting

burial

recrystallization

igneous rock

weathering

Learn more about concept map, here:

https://brainly.com/question/29514792

#SPJ2

CAN SOMONE PLEASE HELP ME WITH THIS ITS MY LAST THING. AND I CANT BE DONE DOING SCHOOL UNTIL THIS IS DONE. (AND IV ALREADY BEEN DOING SCHOOL FOR 5 HRS PLZZZHELP)
Step 5: Write a paragraph describing the water cycle.
a) Type one to two paragraphs describing the full water cycle. Be sure to use full sentences and
proper grammar.

Answers

Answer: All the water we have on the Earth has been cycled and recycled for millions and millions of years. The water in the ocean evaporates and becomes clouds. The clouds cool and the water vapor condenses and becomes rain, or if cold enough, snow or ice. That precipitation falls on the land where some of it remains on mountain tops until it melts and runs down into streams and rivers and back to the ocean. Some of the rain seeps into underground rivers and caves called aquifers. From the aquifers, wells can pump the water up to homes and factories where we use it for drinking, cooking and manufacturing and flushing toilets. And returned to rivers that flow into lakes, reservoirs, and is pumped back into cities or irrigation systems.

Water from the sky or from the irrigation systems is also absorbed by plants and is used in the process of photosynthesis to produce carbohydrates-- nutrition for the plants and trees, and food for us animals. And we return it to the cycle. You may not like the thought of it, but a bit of the water you use today may have been drunk by a dinosaur, and returned to the water cycle all in the course of nature's ways.

An animal that is tightly attached to rocks (such as mussels) during intense wave activity is said to be ____.

Answers

A Sessile is an animal that is tightly attached to rocks (such as mussels) during intense wave activity.

Animals are multicellular, eukaryotic organisms within the biological nation Animalia. With few exceptions, animals devour natural cloth, breathe oxygen, are able to pass, can reproduce sexually, and undergo an ontogenetic level in which their body includes a hole sphere of cells, the blastula, for the duration of embryonic improvement. Over 1.5 million dwelling animal species had been described—of which around 1 million are bugs—however, it's been predicted there are over 7 million animal species in general.

Connected without delay through the base: no longer raised upon a stalk or peduncle a sessile leaf sessile bubbles. completely attached or set up: no longer unfastened to move approximately sessile sponges and coral polyps.

Most residing animal species are in Bilateria, a clade whose participants have a bilaterally symmetric body plan. The Bilateria encompass the protostomes, containing animals consisting of nematodes, arthropods, flatworms, annelids, and mollusks, and the deuterostomes, containing the echinoderms and the chordates, the latter such as the vertebrates. life bureaucracy interpreted as early animals had been present within the Ediacaran biota of the late Precambrian. Many current animal phyla became actually established within the fossil file as marine species all through the Cambrian explosion, which commenced around 539 million years ago.

Learn more about Animals here:https://brainly.com/question/25897306

#SPJ4

primarily, what type of plate boundary makes up the ring of fire?

Answers

The Ring of Fire is primarily made up of convergent plate boundaries. When tectonic plates push against each other, they create a boundary known as a convergent boundary. This is because the two plates are moving towards each other, with one eventually sliding beneath the other.

When two plates collide, one of three things can happen. First, one of the plates may slide beneath the other. This is known as subduction, and it usually creates a trench. Second, the two plates may crumple and buckle, creating mountains. Finally, if both plates are continental, they may collide and fuse together, creating a single, larger landmass.On the Ring of Fire, there are many subduction zones, where one plate is sliding beneath another. This is why the Ring of Fire is home to many volcanoes and frequent earthquakes. Additionally, the subduction of the oceanic plate causes it to melt, which creates magma that can reach the surface and cause volcanic eruptions.

To know more about convergent plate visit:

https://brainly.com/question/23845744

#SPJ11

The Earth system is powered by energy from two sources.
One source is the sun, which drives external processes that occur in the atmosphere, hydrosphere, and at Earth's surface.
Weather and climate, ocean circulation, and erosional processes are also driven by energy from the sun.

Answers

The Earth system is powered by two major sources of energy: the Sun and the planet's internal heat.

The physical, chemical, and biological processes that coexist on Earth are referred to as the "Earth system." The land, oceans, atmosphere, and poles make up the system. It includes the planet's natural cycles, such as the carbon, water, nitrogen, phosphorus, and sulfur cycles, as well as deep Earth processes.

The Earth orbits the Sun once a year and rotates once a day on its axis of rotation. This rotation axis is bent at 23.5 degrees relative to its plane of orbit around the Sun. As the Earth revolves around the Sun, the North Star follows the slope of the Earth's axis.

To know more about Earth system, click here.

https://brainly.com/question/22549062

#SPJ4

Discuss the following statement and illustrate your discussion: The agricultural and industrial revolutions transformed the economic context in Europe, not only by introducing new technologies, but by undermining old customs, practices, and social relationships and fostering a new social environment.

Answers

The innovations in agricultural technology, such as improved breeds of animals, crop rotation, and seed drills, made it possible to cultivate larger areas of land more efficiently and hence grow more food. As a result, the population grew rapidly, which led to a significant increase in demand for goods and services.

The industrial revolution introduced new machinery and production techniques, which led to increased productivity, lower costs, and increased profits. However, the introduction of new technologies also disrupted old customs, practices, and social relationships. The emergence of the factory system, for instance, led to the separation of work from home, which undermined the traditional family structure and social relationships.

Workers were forced to leave their homes and work in factories, which led to the growth of cities and urbanization. The new social environment fostered by the agricultural and industrial revolutions led to the emergence of a new middle class that gained political power and influence.

Overall, the agricultural and industrial revolutions transformed the economic, social, and political landscape of Europe, leading to the emergence of a new world order that remains to this day.

To know more about crop rotation visit :

https://brainly.com/question/30172802

#SPJ11

day after tomorrow the weather station in the uk records sudden drops in ocean surface temperatures in multiple places in the north atlantic. based on what you have seen thus far, what do you think you are supposed to conclude is causing that temperature drop?

Answers

Based on the information provided, it is likely that the sudden drops in ocean surface temperatures in the North Atlantic are caused by a weather phenomenon or an oceanographic event, such as a cold front, upwelling, or a change in ocean currents.

Further investigation would be necessary to pinpoint the exact cause of the temperature drop. Based on the information given, it is likely that there is a sudden weather pattern or storm causing the temperature drops in the surface of the North Atlantic Ocean. It could also be a result of a cold front moving through the area. However, without more information, it is difficult to determine the exact cause of the sudden temperature drop.

Learn more about the phenomenon here: brainly.com/question/31122160

#SPJ11

Explain the difference between a Long Profile and a Cross Profile of a River.

Answers

Answer:

The average flow velocity of a river increases along its long profile. This makes sense; along the profile, more potential energy is converted to kinetic energy, increasing the velocity. This is only the average velocity however; a cross-section of a river shows that the velocity varies from one side to the other.

Explanation:

Other Questions
a gaseous hydrogen and carbon containing compound is decomposed and found to contain 74.98% c and 25.02% h by mass. the mass of 245 ml of the gas, measured at stp, was 0.879 g. what is the molecular formula of the compound? (a) Consider the three points (21, y) = (1,0), (x2, y2) = (2, 2) and (3, y3) = (3,-6). Use an augmented matrix to find the quadratic polynomial p(1) that goes through these three points. (b) Keep the first two points the same, but now instead consider the third point to be (I'3, y) = (-3,6) (so our three points are (x1, y) = (1,0), (x2, y2) = (2, 2) and (x's, y) = (-3, 6)). Use an augmented matrix to find the quadratic polynomial p(1) that goes through these three points. (c) Use graphing software (such as Desmos) to graph the two polynomials you found. Sketch or include an image of your resulting graph in your submission, labelling the particular points used to find these two polynomials. Notice that though our polynomial interpolations used two out of three of the same points, our final polynomials look quite different! (d) Write out, but do not solve, the augmented matrix for the system of equations that will result in the coefficients of the polynomial of that goes through all four points (-1, y), (12, y2), (13, y3), and (1'3, y3) Please and thank you CAN SOMEONE PLS ANSWER THIS AND EXPLAIN The enzyme that unzips DNA during replication is called... Identify the domain of the following functions: a) f(x) = log( - 6x + 9) Domain: b) f(x) = ln(7x - 6) Domain: c)f(x) = log2( - 5x + 1) Domain: The aerodynamic behavior of an insect is to be tested using a 10:1 scale model in a wind tunnel (the model is larger than the real insect). Assume that the lift, L, generated by the insect's wings depends on the freestream fluid velocity V[infinity] , insect wing span b, flapping frequency f (cycles per second), fluid viscosity , and fluid density rho. a. What dimensionless parameters would you use for this problem? Use V[infinity] ,b, and rho as repeating variables. b. In real flight, the insect travels at a speed of 1.25 m/s and flaps its wings at a frequency of 50 Hz. For the flow in the wind tunnel to be dynamically similar to the real flow, what should the flow velocity and flapping frequency in the model system be? You can assume the density and viscosity of the air in the wind tunnel and the insect's natural environment are the same. provides protection and a space to move and breathe *Umbilical cordAmniotic sacAmniotic fluidplacenta Anyone know the answer to this? Emotions can be compared based on their valence and their _____, which refers to the degree of activity of the experience. The social impact of long-term participation in physical activities will results in..A.Controlling your blood pressure B.Increased school performance C.A favourable effect on productivity levelsD.Better friendships and communication skills You and Tim, who is larger than you, are outside with a wagon. Tim (the bigger person) gets in the wagon and you (the smaller one) pull it. As you pull it, you accelerate until you reach a comfortable velocity. Then you stop and switch places with Tim. Tim now pulls you in the wagon, accelerating from a stop to a comfortable velocity. Now, Tim may be bigger than you, but you have been working out and are just as strong as Tim, so the force that Tim uses to pull the wagon is the same force that you used. You both pull with the exact same amount of force. Who was riding in the wagon when it had the greatest acceleration during start-up? Why? Use Newtons second law to explain.Now Sara comes along, and she is the exact same size as you. However, she is even stronger than you! When she pulls you in the wagon, she pulls with a greater force than when you pull her. Now, who is in the wagon when it has the greatest acceleration? Explain, using Newtons second law. What is the difference between endurance and fitness? 3) Which pair of triangles is congruent by Angle - Side - Angle? *322X'4AA4 2. What does a SWOT analysis of Panera Bread reveal about the overall attractiveness of its situation? Doesthe company have any core competencies or distinctive competencies?3. What are the primary components of Panera Bread Plz help 57 is 20% of what? 12. If p II 9, solve for x. which type of organism can obtain energy directly from any of the other organisms in an ecosystem? is it herbivour,producer decompocer or carnivour Which of the following is true about the consumption function? (A) The slope is equal to the MPC. (B) The slope is equal to the MPS. (C) The slope is equal to MPC + MPS. (D) It shifts upward when consumers are more pessimistic about the future. (E) It shifts downward when consumer wealth increases in value. PLEASE HURRY!!! Look at the picture below and please help