during a network reconnaissance exercise, chris gains access to a pc located in a secure network. if chris wants to locate database and web servers that the company uses, what command-line tool can he use to gather information about other systems on the local network without sending additional traffic?

Answers

Answer 1

Chris successfully logs into a PC that is connected to a secure network while doing network reconnaissance.

What do you meant by network reconnaissance?

Active reconnaissance tools are created to communicate with the target network's computers directly in order to gather information that might not be accessible in other ways.

Active reconnaissance can give a hacker considerably more specific knowledge about the target, but it also increases the chance of being caught. The goal of reconnaissance is to identify as many potential attack paths as possible. In order to collect data that may not be accessible in other ways, active reconnaissance technologies are designed to speak directly with the target network's machines.

Active reconnaissance can give a hacker considerably more specific knowledge about the target, but it also increases the chance of being caught.A variety of scan kinds that make use of the specifics of how a system or service functions are used to do this.

To learn more about network reconnaissance refer to:

https://brainly.com/question/28529674

#SPJ4


Related Questions

Mark is the network administrator in his building and is responsible for training all the new technicians on various troubleshooting techniques. He is instructing them on documenting their actions at the end of the troubleshooting process. What should he NOT encourage them to document at that time

Answers

Answer:

See answer below

Explanation:

He should not encourage his new technicians to document theories that were followed at the end of the troubleshooting process. This because the theory might not add to their knowledge about troubleshooting. What is paramount and needed to be documented for future references are their findings, actions taken by them and the outcome achieved through the whole troubleshooting process.

In trouble shooting, a technician aims at solving problems on computer system by following a set of steps such as establishing theory of probable cause, testing the theory to determine the cause, establishing a plan of action and implementing the solutions; in order to determine and solve the problem.

The theories here are the steps that were followed in determining and solving the observed issues hence should not be documented except the findings, actions taken and the final outcomes that were achieved.

Please answer quickly :S

A keyboard would be considered _____. Select 2 options.




storage


an input device


hardware


software


an output device

Answers

Hardware and an input device

Answer: An input device and hardware

Explanation:

Quick!! I'm TIMED!!!
Cloud suites are stored at a(n) ________ on the Internet, rather than on your microcomputer.

blog site

macrocomputer

pod site

server

Answers

Cloud suites are stored at a(n) option d. server on the Internet, rather than on your microcomputer.

What is a cloud at the Internet?

"The cloud" refers to servers which might be accessed over the Internet, and the software program and databases that run on the ones servers. Cloud servers are positioned in facts facilities all around the world.

A cloud suite is a cloud computing version that shops facts at the Internet via a cloud computing company who manages and operates facts garage as a service. It's brought on call for with just-in-time capability and costs, and gets rid of shopping for and handling your very own facts garage infrastructure.

Read more about the cloud suites :

https://brainly.com/question/5413035

#SPJ1

State one criteria that makes a piece of malware a virus.

Answers

Answer: Self replication

Explanation: Malware is a catch-all term for any type of malicious software, regardless of how it works, its intent, or how it's distributed. A virus is a specific type of malware that self-replicates by inserting its code into other programs.

which of the following is not a type of tab stop? left center justified decimal

Answers

The type of tab stop that is not included in Microsoft Word is Justified. Option c is correct.

The different types of tab stops available in Microsoft Word are:

Left tab stop - aligns text at the left end of the tab stop.Center tab stop - aligns text at the center of the tab stop.Right tab stop - aligns text at the right end of the tab stop.Decimal tab stop - aligns numbers at the decimal point in a column.Bar tab stop - adds a vertical line that starts at the tab stop.

Tab stops are utilized in word processing software like Microsoft Word to enable users to align text at specific points. To view and modify tab stops, select the “View” tab from the ribbon menu and click the “Ruler” checkbox in the “Show” section. The ruler that appears above the document shows the tab stops.

Therefore, c is correct.

Learn more about tab stop https://brainly.com/question/30276904

#SPJ11

The goal of a system is to


be natural or human-made

use energy

perform a task

be social or physical

Answers

Answer:

The answer is option C, which is: perform a task

FREE BRAINLIEST!!!!
If you inserted footnotes in a document and later determined that you wanted to use endnotes instead, what should you do? You are not able to change references in a document. You will only need to change the numbering for them to be endnotes. Delete the endnote and insert a footnote. Use the Footnote and Endnote dialog box to convert the references.

Answers

Answer:

  Adding Endnotes in Text Boxes

Text boxes and endnotes are both great tools you can use within a document. Problem is, you cannot use them together—Word doesn't allow you to add endnotes within a text box. This tip looks at how you can get round this problem.

  Adding Footnotes to Endnotes

Word does footnotes. Word does endnotes. Word doesn't do footnotes within endnotes. Here's a discussion as to why and what you might do about it.

  Adding Information after the Endnotes

Endnotes appear at the end of the document, right? Not always, as Word provides a way that you can actually add as much information as you want after the endnotes.

  Automatically Adding Tabs in Footnotes

When you add a footnote to a document, Word's normal formatting adds a space after the footnote number and before the body of the footnote. You may want Word to use a tab instead of the space. There are a couple of ways you can approach this problem, as discussed in this tip.

  Brackets around Footnote References

When you insert footnotes in a document, Word allows you to modify the formatting applied to the footnote references. What it doesn't allow is for you to specify any extra characters that should be included with the reference. Here's a way you can add any extra characters you want, such as a set of brackets.

  Center-column Footnotes

Ever want to change the formatting of your footnotes? This tip explains what you can and can't do in Word.

  Changing How Footnote References Appear

Footnote references normally appear as superscripted digits, both in the main body of your document and in the footnotes area. Unfortunately, changing them is not that easy. If you want them to appear differently, then you need to apply some workarounds as described in this tip.

  Changing the Footnote Continuation Notice

When a footnote needs to span two printed pages, Word prints a continuation notice at the end of the footnote being continued. This tip explains how you can change the wording in that notice.

  Changing the Footnote Continuation Separator

When you add a really long footnote to a document, it could be that the entire footnote might not fit on the page where the footnote reference appears. If that is the case, Word continues the footnote to a subsequent page. You can control the separator that is used for such continuations

Explanation:

If you inserted footnotes in a document and later determined that you wanted to use endnotes instead that adding Endnotes in Text Boxes.

What are text boxes and endnotes?

Text boxes and endnotes are both the great tools that one can use within the document. Problem is that one cannot use them all together The word doesn't just allow you to add  the endnotes within the text box. This is the tip that looks at how you can get round this problem.

The word doesn't do the footnotes within the endnotes. It is a discussion as to why and what you might do about it. Endnotes just appear at the end of the document which is probably right but not always, as the Word provides the way that one can actually add as much the information as one can want after the endnotes.

When there is addition of a footnote to a particular document, Word's normal formatting has been added the space just after the footnote number and than before the body of the footnote. Word to be used a tab instead of the space. There are the couple of the ways one can approach to this problem, as it has been discussed on the tip.

Therefore, If you inserted footnotes in a document and later determined that you wanted to use endnotes instead that adding Endnotes in Text Boxes.

Learn more about footnotes on:

https://brainly.com/question/30063858

#SPJ2

which shortcuts can you use for undo and redo?

Answers

Answer:

Control + Z = undo

Control + Y = redo

"Control + Z" and "Control + Y" can be used for undoing and redoing in most programs, such as Microsoft Word, and virtually any text editor.

give several examples where you need to use clustering instead of classification in business. what do you think the issues are in clustering algorithms? e.g., are they difficult to validate?

Answers

Classification techniques include support vector machines, naive bayes classifiers, and logistic regression. The k-means clustering algorithm, the Gaussian (EM) clustering algorithm, and others are instances of clustering.

Two methods of pattern recognition used in machine learning are classification and clustering. Although there are some parallels between the two processes, clustering discovers similarities between things and groups them according to those features that set them apart from other groups of objects, whereas classification employs predetermined classes to which objects are assigned. "Clusters" are the name for these collections.

Clustering is framed in unsupervised learning in the context of machine learning, a branch of artificial intelligence. For this kind of algorithm, we only have one set of unlabeled input data, about which we must acquire knowledge without knowing what the outcome will be.

Know more about machine learning here:

https://brainly.com/question/16042499

#SPJ4

4.3 Code Practice: Question 1
Instructions
Grandma Ester normally gives you hugs for your birthday - one for every year old you are. When you turned 15, she squished you with 15 hugs! This year, she, unfortunately, cannot see you on your birthday, so instead, she wants to send you virtual hugs!

Create a program that prompts the user for how old they are turning and then using a loop, output a virtual hug for every year old they are.

The following prints a single “virtual hug.”

print("**HUG**")

Answers

in python 3:

age = int(input("How old are you turning? "))

i = 0

while i < age:

   print("**HUG**")

   i += 1

I hope this helps!

what is a file named TR/Dldr.Adload.ugkeo doing on my computer

Answers

Answer:

That's brainly's way of making sure you're not a bot

Explanation:

I don't actually know

Answer:

did you download any file from this user or this similar link look at the picture below. If you please take it to someone who know how to get rid of viruses

what is a file named TR/Dldr.Adload.ugkeo doing on my computer

arrange the following devices pendrive , hard disk , compact disc in descending order of storage capacity​

Answers

Answer:hard disk compact disc

Explanation:

You are building a game that needs to do the following:

•Make the player unable to cross walls of yellow blocks

•Make the player "faint" and start
over if it touches a red block

•Make the player win if it touches a green block

Which three modules would you need to use?

A. An "if () then" block that outputs movement to the initial position if
the sprite touches a red block.

B. An "if () then" block that outputs a small change in position if the
sprite touches a yellow block, one for each direction

C. A "forever" block that outputs different messages in sequence as
the player navigates

D. An "if () then" block that outputs a happy sound
the sprite touches a green block
and message if the spirit touches a green block

Answers

green block and the red block

AAA DRIVER'S ED has anyone done this before??? and they know the answer?? bc its not working

AAA DRIVER'S ED has anyone done this before??? and they know the answer?? bc its not working

Answers

The correct sequence for the driver's ED test is:

Check gaugeStart engineRelease keyCheck lightsLet engine idleCheck if gear is in parkCheck parking brakeFoot on brake pedal

What is a Driving Test?

This refers to the official test of how competent a driver is to ride on the highway and must be passed in order to get a driving license.

Hence, we can see that when taking a driver's test, you would be tested on your knowledge of starting a car, checking the gauges and parking brakes, and the correct sequence of doing it.

Read more about driving test here:

https://brainly.com/question/2666433

#SPJ1

Answer: Mine was not working either, it said it was wrong even though i did it correctly, here is the proper sequences:

Explanation:

AAA DRIVER'S ED has anyone done this before??? and they know the answer?? bc its not working

________ are professional accountants who serve the general​ public, not one particular company.

Answers

Certified public accountants

Describe artificial intelligence with example?​

Answers

Artificial intelligence refers to the ability of technology, particularly computer systems, to mimic human intellectual functions.

The following cognitive characteristics are prioritized in AI programming:

Learning: This branch of AI programming is involved with obtaining data and developing the rules required to convert it into meaningful knowledge.

Reasoning: This branch of AI programming is involved in determining the optimum algorithm to achieve a specific goal.

Creativity: This branch of AI creates new images, texts, songs, and ideas using neural networks, rules-based systems, statistical techniques, and other AI tools.

Benefits of AI:

1. Good at professions requiring attention to detail.

2. Jobs requiring a lot of data take less time.

3. Boosts productivity and reduces labor costs.

4. Consistently produces results.

5. May raise customer happiness by personalizing the experience.

6. Virtual agents with AI capabilities are always accessible.

Drawbacks of AI:

1. Expensive.

2. Strong technical competence is necessary.

3. A dearth of skilled personnel to create AI tools.

4. Reflects the scaled-down biases in its training data.

5. Inability to translate generalizations from one activity to another.

6. Reduces employment and raises unemployment rates.

AI is one of many different types of technology. Here's an example:

Natural Language Processing (NLP): A computer program processes human language in this manner. Spam detection, which analyzes the subject line and body of an email to decide if it is spam or not, is one of the earliest and most well-known uses of NLP.

To learn more about Artificial Intelligence:

brainly.com/question/25523571

List out analog computer​

Answers

Answer:

1. Wall clocks.

2. Analog watches

3. Measuring instruments with callibration

Explanation:

Which of the following are external events? (Select three answers.) Which of the following are external events? (Select three answers.)

A) Special dinner and slide show for the company's investors

B) An employee picnic

C) An anniversary sale with discounted prices for all customers

D )A live music concert at a music store

E) An out-of-town retreat for the company's sales team
F) A department store fashion show

Answers

Answer:

* C - An anniversary sale with discounted prices for all customers.

* D - A live music concert at a music store.

* F - A department store fashion show.

Explanation:

External events are events for people outside the company, such as customers, potential customers, and the public.

Answer:

c,d,f

Explanation:

A power supply is an electrical transformer that regulates the electricity used by the computer. Select one: A. False B. True

Answers

Answer:

The Answer is B

Explanation:

The power supply converts AC current to DC current and protects the P.C. hardware from being fried from electrical surges. So it regulates electricity.

How do you delete data from a cell?
O press the delete key
O the d key
O the enter key
O F5 key

How do you delete data from a cell?O press the delete keyO the d keyO the enter keyO F5 key

Answers

Answer:

press the delete key is the way to delete the data from a cell

what happens to information once information is shared online?

Answers

When information is shared online, it can be manipulated and taken out of context, hence personal information such as credit/debit card number, PIN etc., are not recommended to share online.

Where does your information go when you post it online?

Rather than deleting data, most apps, databases, and even hard drives just mark it as deleted. In fact, the data remains in the website's database until someone manually deletes it. Some companies may promise to delete your data if you cancel your account on their site, but even that is not a guarantee.

What information is not allowed to be shared online?

Sharing sensitive information not allowed online include addresses, phone numbers, family names, vehicle information, passwords, work history, credit status, social security numbers, date of birth, school names, passport information, driver's license numbers, insurance policy numbers, loan numbers, credit/debit card number, PIN etc.

To learn more about online information visit:

https://brainly.com/question/29886948

#SPJ4

Which tab do you select to change how you see your Word document on screen?

A: Help
B: Home
C : Review
D: View

Answers

Answer:

D

Explanation:

brainliest pls

virtual conections with science and technology. Explain , what are being revealed and what are being concealed​

Answers

Some people believe that there is a spiritual connection between science and technology. They believe that science is a way of understanding the natural world, and that technology is a way of using that knowledge to improve the human condition. Others believe that science and technology are two separate disciplines, and that there is no spiritual connection between them.

What is technology?
Technology is the use of knowledge in a specific, repeatable manner to achieve useful aims. The outcome of such an effort may also be referred to as technology. Technology is widely used in daily life, as well as in the fields of science, industry, communication, and transportation. Society has changed as a result of numerous technological advances. The earliest known technology is indeed the stone tool, which was employed in the prehistoric past. This was followed by the use of fire, which helped fuel the Ice Age development of language and the expansion of the human brain. The Bronze Age wheel's development paved the way for longer journeys and the development of more sophisticated devices.

To learn more about technology
https://brainly.com/question/25110079
#SPJ13

7. What enhancing techniques that lines the interior of drawers and boxes resulted to soft velvety finish? A. Wood Turning b. Painting c. Etching d. Flocking

Answers

Answer:

d. Flocking

Explanation:

Flocking is one of the methods that is used to bring a finishing and decorative touch in the furniture. It is a process in which very fine particles are placed on the surface of the furniture to provide a texture to it. This process helps in adding a texture, providing a distinct color, and for better maintenance of the product. In the interior of the drawers and boxes, flocking is done so as to bring a soft and velvety finish.

Which disk types does windows support?

Answers

Windows supports two types of disks: Basic and Dynamic. Basic disks are the standard disk type used by Windows and support the NTFS, FAT, and exFAT file systems. Basic disks can be divided into primary partitions and logical drives within extended partitions. Dynamic disks, on the other hand, offer more advanced features such as support for software-based RAID and the ability to create volumes that span multiple disks. However, dynamic disks are not supported on all versions of Windows, and converting a basic disk to a dynamic disk can cause data loss, so it should only be done with caution and a backup of important data.

1. NTFS (New Technology File System) - This is the default file system format for modern versions of Windows, providing features such as file and folder permissions, encryption, and compression.

2. FAT32 (File Allocation Table) - This is an older file system format that is still supported by Windows for compatibility with older devices and operating systems. However, it has limitations on file size and partition size.

3. exFAT (Extended File Allocation Table) - This is a newer file system format that supports larger file sizes and partitions than FAT32, making it useful for external storage devices like USB drives and SD cards.

4. ReFS (Resilient File System) - This is a newer file system format that is designed for high-performance and reliability, particularly for large-scale data storage and server environments. However, it is only available in certain editions of Windows, such as Windows Server.

Hoá học 9 giải hộ mềnh vơiz:))

Ho hc 9 gii h mnh viz:))
Ho hc 9 gii h mnh viz:))
Ho hc 9 gii h mnh viz:))

Answers

Answer:

sorry di ko alam

Assignment: Blues Progression
Blues is a sub-genre of jazz that follows some specific guidelines: specifically, the Blues scale and the Blues chord progression.
In this assignment, you’ll write out a 12-bar Blues chord progression. This assignment is a MuseScore assignment. Do not turn in this document for grading.

Directions:

1. Create a new document in MuseScore
a. For the title, write “MuseScore Assignment: Blues”.
b. For the composer, write your name., then click "next".
c. Under "general", choose “Grand Staff”, then click “Next”.
d. Choose G major for your key signature (1 sharp), then click next.
e. Choose “Piano” (in the Keyboards section) for your instrument. (This step may or may not show for you. It's ok either way!)
f. Choose 4/4 for your Time Signature and 12 measures for number of measure.
g. Click “Finish”.

2. In the Bass Clef, write out a 12-bar Blues Chord Progression.
a. Use whole notes for your chords
b. I – I – I – I – IV – IV – I – I – V7 – IV – I – V7

Save your assignment (with your name!) and submit it to the Composition: Blues Progression Dropbox basket. Turn in the MuseScore file only.

Answers

Explanation:

I can provide you with the 12-bar Blues chord progression as you requested:

In the key of G major:

I (G) – I (G) – I (G) – I (G)

IV (C) – IV (C) – I (G) – I (G)

V7 (D7) – IV (C) – I (G) – V7 (D7)

The Roman numerals in parentheses represent the chords to play in each measure, and the chord names outside the parentheses indicate the actual chords to play in the key of G major.

What zone is used to publish external websites for an organization? a. Intranet b.exanet c. internetwork d. DMZ

Answers

The zone used to publish external websites for an organization is the DMZ (d. Demilitarized Zone).

So, the correct answer is D.

A DMZ is a separate network segment that acts as a buffer between an organization's internal network (intranet) and the internet.

This zone provides an additional layer of security, as it isolates external-facing services, like websites, from the internal network.

This way, if an external attacker were to compromise the external website, they would not have immediate access to the organization's sensitive data and internal resources.

Intranet, extranet, and internetwork are not the correct terms for this purpose as they refer to different aspects of network communication and infrastructure.

Hence, the answer of the question is D.

Learn more about DMZ at https://brainly.com/question/31130651

#SPJ11

Which of these can replace the function of lenses in a telescope?
Group of answer choices
Photographic Plate
Mirror
Charge Coupled Device (CCD)
Diffraction Grating
Prism
Flag question: Question 7
Question 72 pts
If you wanted a higher resolution image, what should you do?
Group of answer choices
Use a brighter background light
Have less background light
Get a bigger telescope
Use more colors
Use a microscope instead
Flag question: Question 8
Question 82 pts
Radio telescopes often combine the signals from multiple antennae to simulate a much larger telescope using what technique?
Group of answer choices
Seeing Disk
Hubble’s Law
The Doppler Effect
Adaptive Optics
Interferometry
Flag question: Question 9
Question 92 pts
What does 5772 K represent for the Sun?
Group of answer choices
The temperature that the Earth would be heated up to by the Sun if we didn’t have an atmosphere blocking out infrared radiation
The temperature at the center of a sunspot
The temperature of a blackbody that best fits the Sun’s surface emission
The average temperature throughout its entire structure
Its highest core temperature
Flag question: Question 10
Question 102 pts
What represents the amount of solar energy received at the top of Earth’s atmosphere?
Group of answer choices
Sunspot
Solar flux
Solar constant
Nuclear fusion
Solar luminosity

Answers

Telescopes are tools that enable us to see distant objects. Lenses or mirrors in telescopes are used to reflect and focus light onto a detector that can record the image.

The role of lenses in a telescope can be substituted by a mirror. Mirrors have curved surfaces that reflect light and bring it to a focal point. Light passes through the telescope tube and is reflected from the primary mirror to the secondary mirror and then onto the eyepiece.Radio telescopes often combine the signals from multiple antennae to simulate a much larger telescope using the technique called Interferometry. It is used for higher resolution and sensitivity of the telescopes.The temperature of a black body that best fits the Sun’s surface emission represents 5772 K for the Sun. A black body is an idealized object that absorbs all the radiation that falls on it. It emits radiation in a unique way that depends only on its temperature. The temperature of the sun's surface is approximately 5,800 Kelvin, while the sun's core is roughly 15 million Kelvin.The amount of solar energy received at the top of Earth's atmosphere is called the solar constant. It represents the amount of power received per unit area and has a value of approximately 1,366 watts per square meter. It is used as a standard measurement for determining the solar energy received by the earth.

Learn more about image :

https://brainly.com/question/29347554

#SPJ11

Which one of the following is an example of an office layout? a. A buffet line in a restaurant. b. Automated car wash. c. Assembly line for producing TVs. d. All of the above. e. None of the above.

Answers

An example of an office layout is: e. None of the above.

An office layout refers to the arrangement of furniture, machines, and other workspace equipment in such a way that an office can maximize its productivity and efficiency. It is done to ensure that each employee has a comfortable working environment that is conducive to their role and responsibilities. An effective office layout is critical in ensuring that employees have a safe and healthy workspace, and they can be more productive. Therefore, out of the options given above, the correct answer is e) none of the above.

A buffet line in a restaurant refers to how the food is arranged, allowing customers to serve themselves. An automated car wash refers to a machine that washes a car and other vehicles, which does not require a layout to be designed. The assembly line for producing TVs refers to how TVs are manufactured, and it has nothing to do with the design of an office layout. Therefore, none of the options is an example of an office layout. So the correct answer is e) none of the above.

Learn more about office layout: https://brainly.com/question/30004189

#SPJ11

Other Questions
PLEASE HELP I WILL GIVE LOTS OF POINTS !A student illustrated a model of particles being transported out of the cell. ( image above) what best describes the transport process occurring in the model?a. energy is used to move sodium ions from low concentration to high concentrationb. sodium ions are moving from low to high concentration without using energyc. sodium ions are moving from high to low concentration without using energy d energy is used to move sodium ions from high to low concentration What is the answer to these questions?Plz number them 6-8.This is pt 2 to the question. HELP PLEASE!!!! (-8,7) and (-2,-3) French reading comprehension ASAP EASY EASY EASY EASY EASY mia has arrived late to class. she notices the class is working in groups, interviewing each other on their likes, dreams, and accomplishments. there is a friendly atmosphere as the group members take turns asking and answering questions. what type of group work is mia likely to guess her class is engaged in? How many orbitals in an atom can have each of the following designations:(a) 1s; HELP PLS PLS I NEED TO TURN THIS IN RN A fan consumes 1 unit of electricity in 3 hours. Rahul has 2 fans which consumed 21 units this month. For how many hours did he use the fan this month? plz help? Find the value of x in this proportion.621=10x Short AnswerWrite a program that uses the Scanner to ask the user for an integer, but forces the user to repeatedly re-enter the number until they enter a negative value.Then if the number is odd, print it out. Otherwise, check if the number is less than -10 and if so, print it out twice.For example:4 you would be forced to re-enter-3 is printed once-8 is not printed-13 is printed once-40 is printed twice.java 7x-8y=13 can someone please help me All students in Ridgewood Junior High School either got their lunch in the school cafeteria or brought it from home on Tuesday. 5% of students brought their lunch. 49 students brought their lunch. How many students in total are in Ridgewood Junior High School? A company has the following units produced and costs for two production outputs:Output A: Total Cost = 75,000, Production = 4,500 unitsOutput B: Total Cost = 95,000, Production = 6,000 unitsCalculate the Total fixed costs...A 10,000B 7,500C 17,500D 15,000XYZ PLC produces a product and then sells for 300 each. Total fixed cost is 480,000 per year. Each unit requires: 120 of materials, 60 of labour and production overhead of 40.How many units must be sold to make a 60,000 profit?A 6,750 unitsB 6,000 unitsC 3,375 unitsD 5,250 units If a linear function passes through two points (x1, y1) and (x2, y2), what is the average value of the function on the interval from x1 to x2 In an occupied space, I have a 100 fluorescent luminaires. All luminaires are 277V single-phase 2 x 2 2-bulb units, with a ballast dedicated to each bulb. The ballast and bulb combination use a combined 30 watts (25 for the lamp and 5 wasted as heat by the ballast) of power during operation.a. In my space, 20% of my lights are designated as exit lighting. An exit luminaire keeps both bulbs on 100% of the time to provide a minimum level of illumination to move around the building. How much power am I using a year to keep these luminaires on?b. A further 10% (apart from the exit lighting) of the total luminaires are used as egress lighting. These luminaires have a separate battery pack attached to a single ballast and bulb combination which provides illumination in the event of a total power outage. How much power do the battery packs need to provide during a power outage. If the lights must be kept on for 90 minutes after a power outage, how much energy to the battery packs need to supply during this period?c. I want to install these same fixtures above a public, indoor swimming pool. What special considerations do I need to keep in mind to install these luminaires in this location? Cite your reasons. Catapults were invented by which greek scientist: a. euclid c. eratosthenes b. apollonian d. archimedes of syracuse please select the best answer from the choices provided a b c d Tomorrow at two p.m. she _____________________ a very important exam a gym owner is considering opening a location on the other side of town. the new facility will cost $1.56 million and will be depreciated on a straight-line basis over a 20-year period. the new gym is expected to generate $577,000 in annual sales. variable costs are 40 percent of sales, the annual fixed costs are $94,100, and the tax rate is 34 percent. what is the operating cash flow? multiple choice $345,234 $112,234 $278,620 $192,906 $244,386 What is the pressure in a 8.00 L tank with 50.5 grams of chlorine gas at 365 K?