The slope of the oxyhemoglobin dissociation curve, the slope of the O₂ myoglobin dissociation curve is curve is steeper but in the same direction (positive slope) .
In simple terms, O₂ myoglobin dissociation curves can transport more O₂ at low partial pressures when compared to the oxyhemoglobin dissociation curves. When compared to hemoglobin, myoglobin is a monomer protein that contains only one heme group, which can bind one O₂ molecule only. Hemoglobin is a tetramer protein that consists of four subunits, each containing one heme group. The affinity of myoglobin for O₂ is significantly higher than that of hemoglobin, meaning that it can hold on to the bound O₂ tightly.
The amount of O₂ released from myoglobin is highly dependent on tissue demand and partial pressure. The steep slope of the O₂ myoglobin dissociation curve indicates that O₂ is released rapidly, supplying a large amount of O₂ to tissues with a high metabolic rate.
To know more about oxyhemoglobin click here
brainly.com/question/28135307
#SPJ11
Determine whether each statement refers to species diversity or genetic diversity.
Every organism in an ecosystem relies on other species for survival:__________
Reduced options for mates can lead to inbreeding:
Decreased diversity can lead to increased susceptibility to disease:___________
The loss of a producer could result in the loss of consumers:___________
When a population becomes small, diversity is lost:
Answer:
1. species diversity
2. genetic
3. genetic
4. species
5. genetic
Explanation:
1 and 4th shows species diversity whereas 2, 3, 5 refers to genetic diversity.
What is the difference between genetic and species diversity?The primary difference between genetic diversity and species diversity is that genetic diversity refers to differences in DNA that may be found across individuals of the same species
Whereas species diversity refers to the number of different species that can be found in a certain region. The term "ecological diversity" refers to the range of ecosystems that may be found in a certain region.
A given species' capacity to adapt and spread across a variety of environments is facilitated by genetic diversity. Diversity of species fosters biotic interactions and community stability.
Learn more about diversity, here:
https://brainly.com/question/17708323
#SPJ2
why should the solvent not touch the pencil line in chromatography ?
Answer:
The solvent level has to be below the starting line of the TLC, otherwise the spots will dissolve away.
Explanation:
Assume that a protein is active only when it is activated but not inhibited by its upstream signaling molecules.
Assuming a protein is active only when it is activated but not inhibited by its upstream signaling molecules means that specific signals are required to trigger the protein's activity.
In this context, activation refers to the process of stimulating the protein to perform its intended function. Proteins often participate in complex signaling pathways within cells, where various molecules act as upstream regulators. These upstream signaling molecules can either activate or inhibit the protein of interest. For the protein to be active, it must receive activating signals without any inhibitory signals that would hinder its function. The absence of inhibition ensures that the protein's activity is not suppressed, allowing it to carry out its intended role effectively. This mechanism helps to maintain proper cellular functions and ensures that the protein responds appropriately to the specific signals it receives. Understanding the activation and inhibition dynamics of proteins is crucial in studying cellular signaling processes and designing targeted therapies that modulate protein activity for therapeutic purposes.
Learn more about protein here:
https://brainly.com/question/33861617
#SPJ11
many plants grow better with relatively high concentrations of in the greenhouse atmosphere.
Many plants grow better with relatively high concentrations of
carbon dioxide in the greenhouse atmosphere.
We can describe a greenhouse as an artificially constructed area where optimal conditions are given to a plant for its growth. The greenhouse protects the plants from harsh weather.
In a greenhouse, higher concentrations of carbon dioxide gas are maintained. This is done, in order to facilitate the plant for photosynthesis. Photosynthesis is the process by which plants make glucose and oxygen from carbon dioxide and water in the presence of light energy. As carbon dioxide is required for photosynthesis, hence the levels of carbon dioxide gas are kept higher in a greenhouse.
The optimal conditions provided in a greenhouse make plant growth possible even during unfavorable environmental conditions.
To learn more about greenhouse, click here:
https://brainly.com/question/25827545
#SPJ4
How do operations performance objectives trade off
against each other?
Operations performance objectives trade off against each other as the performance of one objective can be improved by compromising on another. These trade-offs are mostly due to resource constraints, and thus, they are a significant factor in operations management.
What are operations performance objectives?Operations performance objectives refer to the specific outcomes that an operation seeks to achieve. They are the goals of an operation. Organizations use operations performance objectives to create a strategy that addresses the objectives and outlines how to achieve them. Operations performance objectives are split into five categories: Cost: This objective refers to providing a service or product at the lowest possible cost.
Quality: This objective refers to providing a service or product that meets or exceeds customer expectations. Speed: This objective refers to delivering a service or product quickly. Dependability: This objective refers to delivering a service or product as promised. Flexibility: This objective refers to the ability to provide a service or product that meets customer needs. Operations performance objectives trade-offs Operational performance objectives trade-offs refer to the relationship between performance objectives. In operations management, achieving one objective often means sacrificing another. For example, achieving higher quality may mean incurring higher costs, which is a trade-off between quality and cost. In some cases, achieving one objective may enhance another. For instance, a quicker turnaround time (speed) can increase dependability and flexibility. These examples show that trade-offs can be positive or negative. The following are common trade-offs among operational performance objectives: Cost vs. quality: Offering higher quality goods or services will increase costs. Flexibility vs. speed: Being flexible slows down the speed of operations. Speed vs. quality: Higher speed may lead to lower quality. Dependability vs. flexibility: To be dependable, the operations need to be standardized, limiting flexibility.
Learn more about Operations performance here.
https://brainly.com/question/29636818
#SPJ11
Match each description to the appropriate tool. measures a variety of data, including pH levels and conductivity measures temperature, humidity, wind speed, and pressure gathers information about local atmospheric conditions can digitally record data, such as flow rate
Answer:
1. Scientific probe.
2. Weather station.
3. Weather station.
4. Scientific probe.
Explanation:
1. Scientific probe: measures a variety of data, including pH levels and conductivity. Thus, a scientific probe is a device that is typically used for measuring science-based data such as electrical conductivity, pH levels, salinity etc., of various materials.
2. Weather station: measures temperature, humidity, wind speed, and pressure. Basically, a weather station comprises of various devices for measuring atmospheric conditions such as thermometers, barometers, hygrometer, wind vane etc., used for the measurement of temperature, atmospheric pressure, relative humidity and wind speed respectively.
3. Weather station: gathers information about local atmospheric conditions.
4. Scientific probe: can digitally record data, such as flow rate.
Answer:
SCIENTIFIC PROBE
1. measures a variety of data, including pH levels and conductivity
2. can digitally record data, such as flow rate
WEATHER STATION
1. measures temperature, humidity, wind speed, and pressure
2. gathers information about local atmospheric conditions
Explanation:
These are the correct matches for this question, I got it correct on my test
What is incised to cut out renal cell carcinoma?
The surgical removal of renal cell carcinoma usually entails a nephrectomy, which is the surgical removal of the kidney containing the cancerous tumour.
A partial nephrectomy, which involves removing only the tumour and a portion of the kidney tissue surrounding it, may be possible depending on the size and location of the tumour.
An incision in the abdomen or flank is made to gain access to the kidney during a nephrectomy.
To isolate the kidney from the surrounding structures, the surgeon carefully dissects the tissues and blood vessels surrounding it.
To prevent urine from leaking during the procedure, the ureter, which is the tube that transports urine from the kidney to the bladder, is identified and clamped.
Thus, the answer is nephrectomy.
For more details regarding nephrectomy, visit:
https://brainly.com/question/30051940
#SPJ4
Describe Range: (idk)
Answer:
Well if you mean species, it means the range or distribution of a species is the geographical area or habitat where the species live.
Explanation:
It would help if you could be more specific, But i hope it helps!!
which of the following terms is associated with disturbance of archaeological contexts by plants or animals?
bioproblem
biodisturbance
bioturbation
biorevueltation
none of the above
The term "bioturbation" refers to the disruption of archaeological environments by living things like plants or animals.
What three elements comprise an archaeological context?In archaeology, a context is all the data related to an archaeological element, such as provenance, matrix (the environment in which it was found), and association.
What does an archaeological context mean?The interaction between objects and one another as well as their surroundings is referred to as context in archaeology. There is a specific location for each artifact discovered at an archaeological site. Before removing an artifact from a site, archaeologists make a note of the precise position where it was discovered.
To know more about plants visit:-
https://brainly.com/question/22167412
#SPJ4
kundu n, fulton am. selective cyclooxygenase (cox)-1 or cox-2 inhibitors control metastatic disease in a murine model of breast cancer.
The research study conducted by Kundu and Fulton explores the use of selective cyclooxygenase (COX)-1 or COX-2 inhibitors in controlling metastatic breast cancer in a murine (mouse) model.
COX enzymes play a role in the production of inflammatory mediators, and their inhibition has been studied as a potential therapeutic approach in cancer treatment.
The study investigates the effects of selectively targeting COX-1 or COX-2 in a murine model of breast cancer metastasis.
The findings suggest that these selective inhibitors have the potential to control the progression of metastatic breast cancer, indicating their potential as therapeutic agents in breast cancer management.
To know more about breast cancer, refer here:
https://brainly.com/question/24122071#
#SPJ11
In the rock cycle, weathering and erosion begin the process of the formation of
Select one:
sediments.
minerals.
crystals.
magma.
please help
PLEASE HELP, WILL GIVE BRAINLEIST. Explain the difference between primary and secondary succession. please not such a simple answer
Answer:
Primary succession begins on a newly exposed surface
while secondary succession begins on soil.
Primary succession basically takes place on "lifeless" areas as result of a disturbance for example, Glaciers and lava flow from valcanos.
Secondary succesion begins from things such as forest fires or an abandon field.
Lithification, the process by which sediments are turned into sedimentary rocks, includes _____.
Lithification, the process by which sediments are turned into sedimentary rocks, includes compaction, cementation, and recrystallization.
Lithification refers to complex physical, chemical, or biological processes whereby unconsolidated material like sand, silt, and mud which are sediments become converted to a solid rock called sedimentary rock.
Three different lithification processes are involved in sedimentary rock formation. These processes include Compaction, Cementation, and Recrystallization.
Compaction: Loose sediments are deposited on the ground and these sediments keep piling up, which increases the weight above underlying sediments. The intense pressure caused by the weight from the overlying sediments makes the new sedimentary rocks form by compaction.
Cementation: It is another process associated with lithification that occurs by adjoining with compaction. In this step, dissolved minerals crystallize and make sediment grains glue together. Compaction and cementation are the two common processes involved in lithification.
Recrystallization: It is the third type of lithification. Crystals are already present in a dissolved solution during the lithification process and they undergo a variety of chemical processes to become recrystallized as minerals that are stable in nature. This makes any sediments staying close to the crystals become cemented to each other and now form new sedimentary rock.
Learn more about what types of rock are formed by lithification on
https://brainly.com/question/1446935
#SPJ4
give 3 exampels of where potential energy was converted to klinetic energy
Answer:
1. A rock falling off a cliff
2. Roller coaster starts plummeting from the top
3. Pendulum swings from the top to the middle, once it starts the second up swing the kinetic turns back into potential energy
Answer:
1. Pushing a large rock down a hill.
2. Kicking a stationary soccer ball.
3. Releasing a taut rubber band
I don't know how varied your class's examples of potential energy have been so far, but there are many kinds if you need more variety.
Explanation:
You can just use your imagination for these if you want to! Potential energy is the energy that an object can have, its potential to have energy (just like it says), while kinetic energy is the energy of a moving object. All you need to do is take a still object and apply force to it.
Which of the following is NOT true when comparing the direct and indirect motor pathways? O the direct motor pathways are also called the pyramidal pathways O the rubrospinal tracts are a part of the indirect motor pathways o the indirect motor pathways consist of three major tracts the lateral corticospinal tracts are a component of the direct motor pathways 90% of the corticospinal axons decussate in the medulla oblongata in the direct motor pathways
The lateral corticospinal tracts are a component of the direct motor pathways. This statement is not true.
The direct motor pathways, also known as the pyramidal pathways, are responsible for controlling voluntary movements of the body, and consist of the corticospinal and corticobulbar tracts. The indirect motor pathways, on the other hand, are responsible for regulating muscle tone and posture, and consist of the rubrospinal, vestibulospinal, and reticulospinal tracts. The rubrospinal tracts are a part of the indirect motor pathways. 90% of the corticospinal axons decussate in the medulla oblongata in the indirect motor pathways.
The direct motor pathways, also known as the pyramidal pathways, originate in the primary motor cortex and are responsible for controlling voluntary movements of the body, particularly fine and skilled movements such as writing or playing an instrument. The corticospinal tract, which is the largest and most well-known of the direct pathways, descends from the cortex to the spinal cord and allows for voluntary movement of the limbs and trunk.
In contrast, the indirect motor pathways are responsible for regulating muscle tone and posture, and consist of the rubrospinal, vestibulospinal, and reticulospinal tracts. The rubrospinal tract originates in the midbrain and helps to control limb movements, while the vestibulospinal and reticulospinal tracts originate in the brainstem and help to control balance and posture.
It is actually 90% of the corticospinal axons that decussate (cross over) to the opposite side of the body at the medulla oblongata, which is a part of the indirect motor pathways. This means that the left side of the brain controls the movements of the right side of the body, and vice versa. Finally, the lateral corticospinal tracts are a component of the direct motor pathways and are responsible for controlling movements of the limbs and trunk.
To know more about corticospinal tracts.
https://brainly.com/question/9998119
#SPJ11
What is the purpose of control in an experiment?
Answer:
An experimental control is used in scientific experiments to minimize the effect of variables which are not the interest of the study. The control can be an object, population, or any other variable which a scientist would like to “control.”.
Explanation:
Sheila weighs 60 kg and is riding a bike. Her momentum on the bike is 340 kg • m/s. The bike hits a rock, which stops it completely and throws Sheila forward onto the pavement. If there is no net force on the system, what is Sheila’s velocity immediately after she is thrown from the bike?
Answer:
5.7 m/s
Explanation:
The computation of Sheila 's velocity right after she gets thrown out of the bike is shown below:
1) The Physical principle: conservation of momentum.
If there is no net external force operating on a system, so the system's total momentum is conserved
The momentum, p, is a vector magnitude that is determined as the product of the mass by the velocity:
P = mv.
2) Taking into account therefore that there is no net force on the device, Sheila and the momentum of the bike are the identical pre and post collision.
Based on this, the calculation is as follows
Momentum before the collision:
\(P_1 = (mass\ of\ Sheila + mass\ of\ the\ bike) \times velocity\)
\(P_1 = (60kg + m) \times v_1\)
= 340 kg m/s
Now Momentum after the collision:
\(P_2 = mass\ of\ sheila \times velocity\ of\ Sheila + mass\ of\ the\ bike \times velocity\ of\ the\ bike\)
\(P_2 = 60kg \times v_2 + m \times 0 = 60kg \times v_2\)
\(P_1 = P_2\)
\(= (60kg + m) \times v_1\)
\(= 60kg \times v_2\)
\(= 340 kg .\ m/s\)
\(= 60kg \times v_2\)
\(v_2 = \frac{340\ kg .\ m/s }{60\ kg}\)
= 5.7 m/s
The velocity of Sheila immediately after she is thrown from the bike is 5.67 m/s.
The given parameters;
mass of Sheila, m = 60 kgmomentum of Sheila, P = 340 kg.m/sThe velocity of Sheila immediately after she is thrown from the bike is calculated as follows;
P = mv
where;
v is the velocity Sheila
\(v = \frac{P}{m} \\\\v = \frac{340}{60} \\\\v = 5.67 \ m/s\)
Thus, the velocity of Sheila immediately after she is thrown from the bike is 5.67 m/s.
Learn more here: https://brainly.com/question/22655287
Which amount is the normal value of a client's inspiratory reserve volume?
A. 0.5 L
B. 1.0 L
C. 1.5 L
D. 3.0 L
The normal value of a client's inspiratory reserve volume is approximately 3.0 L.
The inspiratory reserve volume (IRV) is the maximum amount of air that can be forcefully inhaled after a normal tidal inhalation. It represents the additional volume of air that can be taken in beyond the normal tidal volume. The normal value of the inspiratory reserve volume varies among individuals but typically falls within a range of 2.5 to 3.5 liters. Among the options provided, option D, 3.0 L, is the closest to the normal value of a client's inspiratory reserve volume.
It is important to note that individual variations can occur, and factors such as age, gender, height, and overall respiratory health can influence the actual value. Therefore, it is essential to consider these factors and perform specific measurements or tests to determine an individual's precise inspiratory reserve volume. However, in general, 3.0 L is a commonly accepted value within the normal range for healthy adults.
Learn more about inspiratory reserve volume here:
https://brainly.com/question/30056385
#SPJ11
consider the three most common types of skin cancer. then click and drag each label into the appropriate category.Caused by mutations commonly found in moles Arises from the cells that protect from UV Seldom spreads to other tissues Least common type Raised, reddened. scaly appearance Arises from superficial cells of the epidermis If metastasized, the deadliest skin cancer Arises from keratinocytes in the deepest layer of the epidermis Can spread from the keratinocytes to the lymph nodes Most common type
The three most common types of skin cancer are as follows:
Basal cell carcinoma.Melanoma.Squamous cell carcinoma. What is Cancer?Cancer may be characterized as the process of uncontrolled raid division and proliferation of cells. Due to uncontrolled rapid cell proliferation, there is a formation of tumors. This is known as undifferent cell mass.
Basal cell carcinoma is the most common type of skin cancer. The seldom spreads to other tissues. Melanoma: If metastasized, it is the deadliest skin cancer. It arises from the cell that protects from UV light. It is the least common type of skin cancer. This type of skin cancer is caused by a mutation in moles. Squamous cell carcinoma: It possesses raised, reddened, and scaly appearances. It arises from the superficial cells of the epidermis. It also develops from keratinocytes in the epidermis. This is also called squamous cell carcinoma (SCC).Therefore, the three most common types of skin cancer are well described above.
To learn more about Types of skin cancer, refer to the link:
https://brainly.com/question/25033946
#SPJ1
Which of the following statements best describes why most animal fats are formed from saturated fatty acids?
A) The hydrocarbon chains of saturated fatty acids are straight so they can be tightly packed to store more energy in less space.
B) The hydrocarbon chains of saturated fat cannot pack together closely, which keeps the animal from becoming too large.
C) The hydrocarbon chains of saturated fatty acids allow fewer hydrogen atoms to bond, which makes the molecule stable for energy storage.
D) The hydrocarbon chains of saturated fatty acids have bends so they can be loosely packed to store more energy in less space.
good day, hope this helps ^^
In male rodents, the most important sensory stimuli involved in triggering sexual behavior are... Vocalizations from females Pheromones from females Gustatory (taste) stimuli from females Visual stimuli from females Tactile stimuli from females Question 14 In the human menstrual cycle, the luteinizing hormone (LH) surge is triggered by... High estrogen levels Low progesterone levels Menstruation High follicle-stimulating hormone (FSH) levels Ovulation Question 15 If you're finding this exam stressful, right now you might have unusually low levels of... Thyroxine Beta-endorphin Adrenocorticotropic hormone Luteinizing hormone Epinephrine
In male rodents, the most important sensory stimuli involved in triggering sexual behavior are pheromones from females. If you're finding this exam stressful, right now you might have unusually low levels of beta-endorphin.
Pheromones, chemical substances released by one animal that can elicit a response in another animal of the same species, play a crucial role in triggering sexual behavior in male rodents. Male rodents are highly sensitive to the pheromones released by females, particularly during their reproductive cycle. These pheromones carry important information about the female's reproductive status and can stimulate sexual arousal and behavior in male rodents.
Beta-endorphin is a neuropeptide that acts as a natural painkiller and mood regulator. It is produced by the pituitary gland and is involved in the body's stress response. During times of stress, beta-endorphin levels typically increase to help alleviate the stress and promote a sense of well-being. However, if someone is finding an exam particularly stressful, it is possible that their beta-endorphin levels may be lower than usual. Low levels of beta-endorphin can contribute to increased feelings of stress, anxiety, and discomfort.
To know more about Pheromones refer here : brainly.com/question/3712509
#SPJ11
Hemoglobin is:
1) hormone;
2) Enzyme
3) protein;
4) Amino acid
HELPPP PLEASE!!!!
Answer:
The oxygen- carrying pigment and predominant protein in the RBC.
Earth is tilted at a 23.5 degree angle. Explain how this causes the equator to be hot and the poles to be cold.
Answer:
sunlight
Explanation:
at the angle the earth is at, sunlight hits the equator almost directly, as well as the equator being closer to the sun.
frank has type A blood (AA or AO) and margarita has type B (BB or BO) blood. They have a new baby. Vinnie, with type O blood. Is this possible or should frank accuse margarita of cheating?
Answer:
It is technically possible, if and only if, both parents have AO and BO blood.
Explanation:
the only way (most of the time) a child can get O blood is if both genes accepted by the parents are O. That would mean both parents would have to have O recessive genes.
6. Two species of animals with a similar appearance live
in the same habitat but do not compete for food. This
is because they most likely
A) reproduce at different times of the year
B) are the same size
C) occupy different ecological niches
D) are active at night
C. Occupy different ecological niches.
Choose each statement that is scientific.
Ocean tides are caused by the uneven gravitational pulls of the Moon and Sun on different parts of Earth.
Human life is more valuable than other forms of life on Earth because humans are more intelligent than other organisms.
The universe's average temperature and rate of expansion support the idea that it began as one super-dense and hot mass 13.8 billion years ago.
The opinions of randomly selected participants in a survey prove the idea that global temperatures are not increasing on Earth.
The statements that is scientific are:
Ocean tides are caused by the uneven gravitational pulls of the Moon and Sun on different parts of Earth.
The universe's average temperature and rate of expansion support the idea that it began as one super-dense and hot mass 13.8 billion years ago.
A scientific statement is one that is supported by several studies, experiments, and quantifiable and empirical data from the experiment.
Random people's opinions have no bearing on scientific theory.
Science does not support the comparison of human intelligence to that of other life forms. For the world to be properly maintained, the entire biodiversity is necessary.
The scientific statement must be capable of being refuted. This indicates that they could be put to the test; there must be some conceivable observation that could prove them false or wrong. A tautology is a sentence that is unavoidably true. is therefore not scientific.
An official ADA point of view or position that may or may not include therapeutic or research advice is referred to as a scientific statement. Scientific statements provide an academic summary of a diabetes-related subject. Reports from work groups fall under this category.
To learn more about Gravitational pulls visit: https://brainly.com/question/13467280
#SPJ1
Which of the following is/are example(s) of lymphocytes?
1) antibodies
2) B-cells
3) T-cells
4) T and B-cells
Answer:
4) T and B-cells
Explanation:
Deer: Predation or starvation
1. can you think of another way to organize the data above to help us see the relationship between deer and wolf population
There is a strong chance that the deer population would have eventually gone extinct if the wolves had not been brought to the island since there would not have been enough food to sustain all of the deer that were there.
What interactions do you suppose exist between populations of predators and prey?Predator populations grow and exert more pressure on prey populations, acting as a top-down control that causes them to drop. Hence, the size of prey populations is influenced by both resource availability and predation pressure.
Why is starving preferable to death by predators?Predators are a better option for death than famine. A population in need of food will grow emaciated and frail as a result of its famine.
To know more about extinct visit:-
brainly.com/question/29776367
#SPJ1
Some of the major differences between plant and animal cells include all of the following except
Animal cells have ribosomes and plant cells don't.
Animal cells only have a cell membrane whereas plant cells also have a cell wall.
Plant cells have chloroplasts and animal cells don't.
Plant cells have big vacuoles whereas animal cells have small ones.
.
Mitochondria and chloroplasts both have folds in their inner membranes. What are these called?
plasma membranes and cilia
cristae and thylakoid stacks
flagella
pores and ATP
1. Animal cells only have a cell membrane whereas plant cells also have a cell wall.
Plant cells have chloroplasts and animal cells don't.
Plant cells have big vacuoles whereas animal cells have small ones.
2. cristae and thylakoid stacks
The exception in the given options is animal cells have ribosomes and plant cells don't. Therefore option A is correct.
Animal cells have ribosomes and plant cells don't: This statement is incorrect. Both animal and plant cells have ribosomes, which are involved in protein synthesis. Ribosomes are essential cellular structures present in all types of cells.
Mitochondria and chloroplasts both have folds in their inner membranes. These folds are called cristae and thylakoid stacks, respectively. Therefore option B is correct.
Cristae are the inward folds of the inner mitochondrial membrane. They increase the surface area available for cellular respiration, which is the process that produces ATP (adenosine triphosphate) for energy.
Thylakoid stacks, also known as grana, are stacks of membrane-bound compartments within chloroplasts. They contain chlorophyll and other pigments and are involved in the light-dependent reactions of photosynthesis.
Know more about cellular respiration:
https://brainly.com/question/29767249
#SPJ4
based on the graph, describe what is happening between 4 and 6 seconds.
The object is moving away from the start at a constant speed.
The object is not moving.
The object is returning to the start at a constant speed.
The object is changing speed.
Answer:
The object is not moving.
Explanation:
Answer:
its not moving
Explanation: