Choose the option below that forms a weakly basic solution. Assume all acids and bases are combined in stoichiometrically equivalent amounts. I struggle with this.
HCl(aq)+NaOH(aq)⇌NaCl(aq)+H2O(l)
2HI(aq)+Ca(OH)2(aq)⇌CaI2(aq)+2H2O(l)
H2CO3(aq)+Ca(OH)2(aq)⇌CaCO3(aq)+2H2O(l)
2HNO3(aq)+Sr(OH)2(aq)⇌Sr(NO3)2(aq)+2H2O(l)

Evidence that a chemical reaction took place would be the formation of a new substance, a change in color, a release of gas, or a temperature change.

There are several possible pieces of evidence that a chemical reaction has taken place in this experiment:

Part B: In bottles 1 and 2, the amount of ammonia used is different, with bottle 1 having 1 tablespoon and bottle 2 having 1/3 cup.

The amount of product in bottle 2 is more than the amount of product in bottle 1.

Therefore, the amount of product is not proportional to the amount of ammonia used in these two bottles.

Part C: In bottles 2 and 3, the amount of reactants is different, with bottle 2 having 1/3 cup + 1 tablespoon of water and bottle 3 having only 1 tablespoon of water.

The amount of product in bottle 2 is more than the amount of product in bottle 3.

Therefore, the amount of product is not proportional to the amount of ammonia used in these two bottles.

Learn more about chemical reactions at: https://brainly.com/question/11231920

#SPJ1

Answer:

C. Molecules

Explanation: Water is a compound that conatins molecules hydrogen and oxygen.

Answer: Atoms

Explanation:

To calculate the mass of concentrated sulfuric acid (95% H2SO4) needed to prepare 500 g of a 10.0% solution of H2SO4, we can set up a proportion based on the concentration of the solutions.

Let's denote the mass of concentrated sulfuric acid as "M" (in grams) and set up the following proportion:

(10.0 g H2SO4 / 100 g solution) = (M g H2SO4 / 500 g solution)

Cross-multiplying and solving for M, we have:

M = (10.0 g H2SO4 * 500 g solution) / 100 g solution

M = 50 g H2SO4

Therefore, you would need 50 grams of concentrated sulfuric acid (95% solution) to prepare 500 g of a 10.0% solution of H2SO4 by mass.

Learn more about concentration Visit : brainly.com/question/17206790

#SPJ11

Answer:

The formation of a gas is a clue to chemical changes. The bubbles of gas that you observed form when an antacid is dropped into water is an example of change. ... As wood burns, it turns into a pile of ashes and gases that rise into air.

Explanation:

Answer:

2.38 g of oxygen (O2).

Explanation:

What is given?

Mass of potassium chlorate (KClO3) = 6.06 g.

Molar mass of KClO3 = 122.4 g/mol.

Molar mass of oxygen (O2) = 32 g/mol.

Step-by-step solution:

First, let's state the balanced chemical equation. Remember that the decomposition of a compound produces two or more products:

Now, let's convert 6.06 g of KClO3 to moles using its molar mass:

You can see in the chemical equation that 2 moles of KClO3 produce 3 moles of O2. By doing a rule of three with this data, we obtain that:

The final step is to convert from 0.0743 moles of O2 to grams using its molar mass, like this:

The answer is that we will produce 2.38 g of oxygen (O2) from the decomposition of 6.06 g of potassium chlorate (KClO3).

In an endergonic reaction the phosphate group that is removed when atp is converted to adp, a reactant acquires it.

What is phosphate group?

A phosphate group is little more than a phosphorus atom bonded to four oxygen atoms, but despite this, it plays numerous significant roles. It is a component of nucleic acids like DNA and RNA, along with bases and sugars. It supplies energy for our muscles to move as a component of energy carriers like ATP.

Energy is released and ATP is changed into adenosine diphosphate when one phosphate group is removed by breaking a phosphoanhydride bond during a procedure known as hydrolysis (ADP).

To learn more about hydrolysis click on the link below:

https://brainly.com/question/4352413

#SPJ4

Answer:

the value of water is

6000

Answer:

600 or 6000 I'm not sure

80% copper (Cu)

Cu: 80 :  63.546 = 1.259

O: 20 : 16 = 1.25

Cu:O = 1 : 1

the formula: CuO

89% copper (Cu)

Cu: 89 :  63.546 = 1.4

O: 11 : 16 = 0.6875

Cu:O = 2:1

the formula: Cu₂O

The substance in the image above would be classified as a mixture of elements (option E).

A compound is a substance formed by chemical bonding of two or more elements in definite proportions by weight.

On the other hand, a mixture is made when two or more substances are combined, but they are not combined chemically.

According to this question, an image is shown with two different substances or elements as distinguished by coloration (white and purple). These elements are combined but not chemically bonded, hence, is a mixture.

Learn more about mixture at: https://brainly.com/question/12160179

#SPJ1

There will be 0.01 moles of precipitate produced.

The energy released in this nuclear event is more than 100,000 times greater than the energy released in a typical chemical reaction.

When compared to chemical reactions, how much more energy is created by nuclear reactions?

The energy released by nuclei is a million times more concentrated than the energy created by atoms interacting with one another (chemical reactions). Because of this, nuclear weapons are significantly more potent and destructive than conventional weapons.

Are nuclear and chemical energies more potent than one another?

The energies generated in nuclear processes are several orders of magnitude higher than the energies involved in chemical reactions.

To know more about nuclear event

visit:

https://brainly.com/question/14991422

#SPJ4

We need to count the number of oxygen atoms present in each component of the formula and then multiply by the appropriate coefficients.

In hydroxyapatite (Ca10(PO4)6(OH)2), we have:

Breaking down the formula, we find:

So, for each formula unit:

Adding the oxygen atoms from each component:

24 oxygen atoms (from PO4 units) + 2 oxygen atoms (from OH units) = 26 oxygen atoms per formula unit.

Now, multiplying by the 6 formula units:

26 oxygen atoms x 6 formula units = 156 oxygen atoms.

Therefore, in 6 formula units of hydroxyapatite, there are a total of 156 oxygen atoms present.

Learn more about oxygen atoms here : brainly.com/question/12442489

#SPJ11

Answer:

The Watt

Explanation:

Electric power is the rate, per unit time, at which electrical energy is transferred by an electric circuit. The SI unit of power is the watt, one joule per second.

The amount of energy transferred per unit time is called power, and power is measured in Watt.

Watt is the unit of power. It is used to measure the transfer of power. This is named after James Watt.

When one joule of energy is transferred in one second, this is the power of the Watt.

Thus, the amount of energy transferred per unit time is called power, and power is measured in Watt.

Learn more about Watt

https://brainly.com/question/2510568

#SPJ2

Answer:

B

Explanation:

because an atom is the smallest particles that have electrons, neutron and protons

The inner core is solid, fourth layer and made out of iron and nickel. It's the one mostly in charge for the other layers. If the inner core stopped spinning, the outer core would lose its magnetic field, and this will be bad because of the sun's radiation wave. Including the other layers.

The outer core is the liquid, third layer. It's in charge of Earth's magnetic field.

The mantle is the second layer of earth, the original temperature can come up about to 1000+ or more, celsius.

Answer:

it have been already balanced

2H2 + O2 = 2H2O.

Answer:

1653.21 cm

Explanation:

volume formula of rectangular prism is volume times height times width

40.1 times 4.457 times 9.25 = 1653.21

Answer:

The volume of cuboid is 1653.21 cm³

Step-by-step explanation:

GIVEN :

TO FIND :

USING FORMULA :

\(\quad{\star{\underline{\boxed{\sf{V_{(cuboid)} = lbh}}}}}\)

SOLUTION :

Substituting all the given values in the formula to find the volume of cuboid :

\(\quad{\longrightarrow{\sf{V_{(cuboid)} = lbh}}}\)

\(\quad{\longrightarrow{\sf{V_{(cuboid)} = l \times b \times h}}}\)

\(\quad{\longrightarrow{\sf{V_{(cuboid)} = 40.1 \times 4.457 \times 9.25}}}\)

\(\quad{\longrightarrow{\sf{V_{(cuboid)} = 178.7275 \times 9.25}}}\)

\(\quad{\longrightarrow{\sf{V_{(cuboid)} = 1653.21272}}}\)

\(\quad{\longrightarrow{\sf{V_{(cuboid)} \approx 1653.21}}}\)

\(\quad{\star{\underline{\boxed{\sf{V_{(cuboid)} = 1653.21 \: {cm}^{3}}}}}}\)

Hence, the volume of cuboid is 1653.21 cm³.

The rotating element in a centrifugal pump is commonly called the impeller.

An impeller is a rotating component of a centrifugal pump that helps to increase the velocity and pressure of a fluid as it passes through the pump. It consists of a series of curved blades that are arranged in a circular pattern around a central shaft.

When the impeller rotates, the blades create a centrifugal force that causes the fluid to move outward from the center of the impeller. This increased velocity and pressure of the fluid allow it to be pumped to a higher elevation or over a longer distance.

Impellers come in a variety of designs, including closed, semi-open, and open. Closed impellers are used for fluids with low levels of impurities, while open impellers are better suited for fluids with higher levels of impurities.

Impellers are commonly used in various industries such as oil and gas, water treatment, and chemical processing, to pump fluids in large quantities.

Find out more about impeller

brainly.com/question/31064982

#SPJ11

Answer: You would write elements in period 1, 2, 3, and period 4 but you would stop at chromium

Explanation: It would have been too long for me to write every symbol

To determine the pH of a solution using a pH indicator paper, you need a color chart or a color scale that corresponds to different pH values.

This color chart or scale is used to compare the color of the pH indicator paper after it has been immersed in the solution. The pH indicator paper is impregnated with a universal pH indicator, which is a chemical compound that changes color depending on the acidity or alkalinity of the solution.

The indicator undergoes a chemical reaction with the hydrogen ions (H+) or hydroxide ions (OH-) present in the solution, resulting in a color change.

By comparing the color of the pH indicator paper with the color chart or scale, you can determine the approximate pH of the solution. The color chart usually provides a range of colors corresponding to different pH values, allowing you to match the observed color to the nearest pH value.

In the hypothesis mentioned, the aim is to calibrate a cabbage pH indicator using the pH values obtained from a universal pH indicator. Therefore, in addition to the pH indicator paper and color chart, you would also need a range of solutions with known pH values to establish a calibration curve specific to the cabbage pH indicator.

In summary, to determine the pH of a solution using a pH indicator paper, you need a color chart or scale that correlates the observed color of the pH indicator paper with different pH values. This chart or scale serves as a reference for interpreting the color change and determining the pH of the solution.

Know more about   hypothesis  here:

https://brainly.com/question/31293943

#SPJ8

Answer: COLOR KEY

Explanation: CS

The activation energy denoted by Ea is referred to as the minimum energy or the threshold energy required for a reaction to occur. When reactant molecules overcome the repulsion energy resulting in the collision of outer electrons by optimum kinetic energy. Higher the activation energy more easy for the reaction to take place.

When comparing two similar chemical reactions, the reaction with the smaller activation energy (Ea) because the activation energy is lower, the transition of the reactant molecules into the product species requires less energy. Accordingly, the pace of the response will be higher.

Learn more about activation energy, here:

https://brainly.com/question/28384644

#SPJ4

Answer:

11.0 L

Explanation:

The equation for this reaction is given as;

2H2  +  O2  -->  2H2O

2 mol of H2 reacts with 1 mol of O2 to form 2 mol of H2O

At STP;

1 mol = 22.4 L

This means;

44.8 L of H2 reacts with 22.4 L of O2 to form 44.8 L of H2O

In this reaction, the limiting reactant is H2 as O2 is in excess.

The relationship between H2 and H2O;

44.8 L = 44.8 L

11.0 L would produce x

Solving for x;

x = 11 * 44.8 / 44.8

x = 11.0 L

The solubility of oxygen at 10m depth below sea level, 25 degrees Celsius, and 30 g/L salinity is approximately 6.59 mg/L.

To calculate the solubility of oxygen at a specific depth below sea level, temperature, and salinity, we can refer to the oxygen solubility tables. The solubility of oxygen can vary depending on these factors.

1. Begin by identifying the given parameters:
  - Depth: 10m below sea level
  - Temperature: 25 degrees Celsius
  - Salinity: 30 g/L

2. Use the given parameters to locate the corresponding values in the oxygen solubility table.

3. The solubility of oxygen at a depth of 10m below sea level, 25 degrees Celsius, and 30 g/L salinity is typically around 6.59 mg/L.

Therefore, the solubility of oxygen at 10m depth below sea level, 25 degrees Celsius, and 30 g/L salinity is approximately 6.59 mg/L.

Learn more about solubility from this link:

https://brainly.com/question/9098308

#SPJ11

The oxygen solubility at 10m depth below sea level, 25°C, and 30 g/L salinity is approximately 1538 mol/L.

To calculate the oxygen solubility at a specific depth below sea level, temperature, and salinity, we can use the solubility formula.

The solubility of a gas decreases with increasing temperature and salinity, and increases with increasing pressure.

Here's how you can calculate the oxygen solubility at 10m depth below sea level, 25°C, and 30 g/L salinity:

1. Determine the pressure at 10m depth below sea level: -

The pressure at sea level is approximately 1 atmosphere (atm).

The pressure increases by approximately 1 atm for every 10 meters of depth.

Therefore, at 10m depth, the pressure is approximately 2 atm.

2. Convert the temperature to Kelvin: -

To convert from Celsius to Kelvin, add 273 to the temperature.

25°C + 273 = 298 K.

3. Use the solubility formula:

The solubility of oxygen in water can be calculated using Henry's law:

S = k * P * C.

S is the solubility of oxygen in moles per liter (mol/L).

k is the Henry's law constant for oxygen in water at a specific temperature and salinity.  

P is the partial pressure of oxygen in atmospheres (atm).

C is the concentration of oxygen in moles per liter (mol/L).

4. Look up the Henry's law constant for oxygen at 25°C and 30 g/L salinity:

The Henry's law constant for oxygen at 25°C and 30 g/L salinity is approximately 769 L*atm/mol.

5. Calculate the solubility:  

S = (769 L*atm/mol) * (2 atm) * (1 mol/L). - S ≈ 1538 mol/L.

Therefore, the oxygen solubility at 10m depth below sea level, 25°C, and 30 g/L salinity is approximately 1538 mol/L.

Learn more about solubility from this link:

brainly.com/question/9098308

#SPJ11

Answer:

B

Explanation:

Both plain and plateau have flat surfaces. However, a plain is located in a low-lying area while a plateau is located on an elevated area. In essence, a plateau can be viewed as an elevated plain or a plain that is bordered by cliffs.

The correct option is B.

Answer:

Column A            \({}\)                                              Column B

1. CaS                   \({}\)                                              Calcium Sulfide

2. CaSO₄            \({}\)                                                Calcium sulfate

3. CaSO₃            \({}\)                                                 Calcium sulfite

Explanation:

1) Calcium sulfide is a compound formed between calcium, Ca, and sulfur, S, with a chemical formula of CaS. It forms cubic crystals similar to rock salt, and smells like rotten eggs

2) Calcium sulfate is a chemical compound consisting of calcium, Ca, and sulfate SO₄. It is found in nature in the hydrated form as the mineral gypsum

3)Calcium sulfite is a chemical compound formed between calcium, Ca and sulfite, SO₃ used to treat water and preserve food.

Answer:

the formula for calcium sulfite is CaSO3

the formula for calcium sulfate is CaSO4

the formula for calcium sulfide is CaS

Explanation:

"Hypotonic solution," refers to a solution with the highest water concentration due to its lower solute concentration compared to the other options, leading to water influx into cells.

A hypotonic solution would be most likely to have the highest water concentration. In a hypotonic solution, the solute concentration is lower than that inside the cell or compared to another solution. As a result, water tends to move into the cell or the solution to equalize the concentration.

When a cell is placed in a hypotonic solution, water molecules will move into the cell through the process of osmosis. This influx of water increases the water concentration inside the cell, leading to cell swelling or even bursting in extreme cases.

Compared to hypertonic and isotonic solutions, a hypotonic solution has a lower solute concentration, allowing for a higher concentration of water molecules. This results in a higher water concentration in the solution. It's important to note that the concept of tonicity is related to the relative solute concentrations between two solutions and their effect on cell osmosis. In this case, a hypotonic solution is characterized by a higher water concentration compared to the other options.

learn more about Hypotonic solution here:

https://brainly.com/question/28020628

#SPJ11

The biosensor recognition elements that are based on an organism's immune response include b. antibodies and d. peptides. Antibodies are proteins produced by the immune system in response to foreign substances, while peptides can also participate in immune responses by acting as signaling molecules or antimicrobial agents.

Both antibodies and peptides are biosensor recognition elements that are based on an organism's immune response. Antibodies are proteins produced by the immune system in response to specific antigens, and they bind to these antigens with high specificity and affinity. Peptides are short chains of amino acids that can be recognized by T cells, another component of the immune system. Aptamers, on the other hand, are synthetic molecules that can bind to specific targets with high affinity and specificity, but they are not based on immune recognition. Carbohydrates also do not typically play a role in biosensor recognition based on immune response. So, the correct answers to this question are b. antibodies and d. peptides.
To know more about Antibodies visit:

https://brainly.com/question/27931383

#SPJ11

The given reaction of silver nitrate with sodium chloride is an example of double displacement reaction where, two groups replaces each other. Thus, option D is correct.

Displacement reaction is a type of reaction in which a species from a reactant is displaced by other species or group from reagent. There are single displacement reaction as well as double displacement reaction.

In single displacement reaction, only one group is displaced by another group from the second reactant. Whereas in double displacement reaction, two groups are displaced each other between two reactants.

In the reaction between silver nitrate and sodium chloride, the nitrate group and chloride group interchange between the metals silver and sodium as written in the reaction. Hence, it is a double displacement reaction.

To find more on displacement reaction, refer here:

https://brainly.com/question/29307794

#SPJ1

Your question is incomplete, but your complete question probably was:

Jose and Sue were investigating the formation of precipitates in chemistry lab. They

mixed a silver nitrate solution with a sodium chloride solution and immediately a

white solid appeared in the bottom of the test tube. This white solid is a precipitate

of silver chloride. The reaction is represented with the equation:

AgNO3(aq) + NaCl (aq) → AgCl (s) + NaNO3(aq)

The equation represents a ________________ reaction.

A) synthesis

B) decomposition

C) neutralization

D) double replacement

The mechanism of the glyceraldehyde-3-phosphate dehydrogenase does not involve a covalent intermediate. The correct option is C.

Glyceraldehyde-3-phosphate dehydrogenase is the enzyme that is involved in the glycolytic pathway and it will converts the glucose into the pyruvate. The conversion of the glyceraldehyde-3-phosphate (G3P) into the 1,3-bisphosphoglycerate (1,3-BPG) and will coupled with the reduction of the NAD+ to NADH. The mechanism of the GAPDH involves the several steps, but it will not involve the phosphorylation of the substrate using the ATP.

The enzyme uses the covalent intermediate to the transfer the hydride ion from the G3P to the NAD+, forming the NADH. The option C is correct.

To learn more about phosphorylation here

https://brainly.com/question/14258447

#SPJ4

Nuclear fusion: this is the joining of two small atomic nuclei into one nucleus. Nuclear fission: this is the splitting of one large atomic nucleus into smaller fragments.