Answer:
V = 36.4 m³ = 4.86 gallons
W = 80193.88 lbf = 356720 N = 356.72 KN
Explanation:
We have the following data given in the question:
At = Total area of roof = 1967 ft²
h = Annual Rainfall = 14 inches = 1.17 ft
V = Volume of tank in m³ and gallons = ?
W = Weight of water in N and lbf = ?
So, for volume we know that the area of roof that receives rainfall is 56% of total area and 14 inches of annual rainfall means that there is a standing height of 14 inches of rain water for a given area, for 1 year.
Area to receive rain = A = 0.56*1967 ft² = 1101.52 ft²
Now,
Volume = V = A * h = 1101.52 ft²)(1.17 ft)
V = 1285.11 ft³
Converting to m³:
V = (1285.11 ft³)(1 m³/35.3147 ft³)
V = 36.4 m³
Converting to gallons:
V = (1285.11 ft³)(1 m³/264.172 gal)
V = 4.86 gal
Now, for the weight of water, we use formula:
W = ρVg
where,
W = weight of water = ?
ρ = Density of water = 1000 kg/m³
V = Volume of tank = 36.4 m³
g = 9.8 m/s²
Therefore,
W = (1000 kg/m³)(36.4 m³)(9.8 m/s²)
W = 356720 N = 356.72 KN
Converting to lbf:
W = (356720 N)(1 lbf/4.44822 N)
W = 80193.88 lbf
In which type of operations does lean production work best? check all that apply.
Lean production works best with standardized and repeatable processes. Lean production is a manufacturing technique that frequently aims to cut down on wait times for both suppliers' and customers' .
Lean manufacturing seeks to improve processes so that they use less energy, time, and resources overall. For some businesses than others, lean tools may be a better fit. But among the most helpful lean tools are Kaizen, 5S, Kanban, Value Stream Mapping, and Focus PDCA. Value, the value stream, flow, pull, and perfection are the five cornerstones of lean manufacturing, respectively. These are now the cornerstones on which lean is implemented. 1. Value: Value is established from the viewpoint of the customer and relates to the price point at which they are willing to purchase goods or services. Lean production is a manufacturing strategy that frequently aims to cut down on wait times for both suppliers' and customers' responses as well as those inside the manufacturing machine.
Learn more about manufacturing here:
https://brainly.com/question/13740503
#SPJ4
an experiential learning method that uses structured activities to develop teamwork and leadership skills in trainees is known as _____.
The experiential learning method that uses structured activities to develop teamwork and leadership skills in trainees is known as team building. Team building is an effective way to improve communication, collaboration, and trust within a team. The activities involved in team building aim to challenge individuals and groups to work together towards a common goal, providing opportunities for trainees to develop leadership and problem-solving skills. These activities can take many forms, such as problem-solving challenges, outdoor adventure activities, or even games.
The goal of team building is to foster a positive and supportive team environment that allows individuals to learn from one another and to work towards a shared objective. Ultimately, team building can help organizations to achieve better performance, increased job satisfaction, and improved overall morale.
To learn more about problem click here: brainly.com/question/30142700
#SPJ11
You want to build a silo that is in the shape of a cylinder with a cone superimposed on it. Determine the height H of the cylinder and the height h of the cone so that the volume is maximum, if the radius is 5 m and the total surface area of the silo is 1000 m2.
By first identifying the critical points of this function by determining the first derivative, and then calculating the second derivative at the crucial points, you may determine the volume's maximum. The critical point is a maximum if the second derivative is negative.
What determine height H of the cylinder, the height h cone?When a cone and cylinder have comparable heights, the cylinder's volume is three times greater than a cone's volume. Determine the cone's volume. To the tenth of a cubic centimetre nearest, round.
Therefore, Thus, a cylinder with the same base radius and height has a volume that is equal to one-third that of a cone.
Learn more about cylinder here:
https://brainly.com/question/18504110
#SPJ1
Why is the reasoning important when you make a scientific argument?
The acceleration of a particle is defined by the relation a = 9 − 3t2, where a and t are expressed in ft/s2 and seconds, respectively. The particle starts at t = 0 with v = 0 and x = 5 ft. Determine (a) the time when the velocity is again zero, (b) the position and velocity when t = 4 s, (c) the total distance travelled by the particle from t = 0 to t = 4 s.
(a) To find the time when the velocity is again zero, we set the velocity equal to 0 and solve for t:
0 = v0 + at = 9t - 3t^3
Solving for t, we find that t = ±1.
(b) To find the position and velocity when t = 4 s, we first need to find the velocity equation by integrating the acceleration equation:
v = ∫a = ∫(9 - 3t^2)dt = 9t - t^3 + C
Using the initial condition v(0) = 0, we find C = 0 and
v(t) = 9t - t^3
Next, we integrate v(t) to find the position equation:
x = ∫v = ∫(9t - t^3)dt = 3t^2 - t^4 + C
Using the initial condition x(0) = 5, we find C = 5 and
x(t) = 3t^2 - t^4 + 5
Evaluating x(t) and v(t) at t = 4 s, we have:
x(4) = 3(4^2) - 4^4 + 5 = 51
v(4) = 9(4) - 4^3 = -36
(c) To find the total distance travelled by the particle from t = 0 to t = 4 s, we need to find the distance between the initial and final positions:
d = x(4) - x(0) = 51 - 5 = 46 ft
So the total distance travelled by the particle from t = 0 to t = 4 s is 46 ft.
What is one advantage corporations have over other types of businesses
A particle travels along a path made up by two semicircles with same radius of 8 m, as shown. If it travels from rest from point A and its speed is increasing at a constant 2 m/s2, determine the magnitude of its acceleration at point B. B (a) 5.80 m/s2 (b) 6.61 m/s2 (c) 25.2 m/s2 (d) 101 m/s2 ce ) 11:36 / 11:41
The magnitude of its acceleration at point B is option c. The answer is thus 25.2 m/s².
To solve this problem, we need to use the equation for centripetal acceleration, which is a = v²/r, where v is the velocity of the particle and r is the radius of the circular path. Since the path consists of two semicircles, the total distance traveled by the particle is 2πr. We can use the equation v = at to find the velocity of the particle at point B, where t is the time it takes to travel half the distance of the path.
First, let's find the time it takes to travel half the distance:
distance = 2πr = 2π(8m) = 16πm
time = distance/velocity = (16πm)/(0.5v) = 32π/v
Now, let's use the equation v = at to find the velocity at point B:
v = at
v = (2 m/s²)(32π/v)
v² = 64π
v = \(\sqrt{64\pi }\) = 8\(\sqrt{\pi }\) m/s
Finally, we can use the equation a = v²/r to find the magnitude of acceleration at point B:
a = (8\(\sqrt{\pi }\) m/s)²/(8m) = 8π m/s²
Therefore, the answer is (c) 25.2 m/s².
Learn more about acceleration here:
https://brainly.com/question/30660316
#SPJ11
When the batt switch is in EMER, where does the emergency bus get power
When the battery switch is in EMER (emergency) mode, the emergency bus gets power from the aircraft's battery. In this situation, the battery provides power directly to the emergency bus, ensuring that essential systems and equipment continue to operate even if the main power sources fail.
To know more about EMER
https://brainly.com/question/13764148?
#SPJ11
Select the correct answer.
Alan is walking on a street and passes by a very busy construction site. He sees engineers hanging one end of various objects to the ceiling and the other end to heavy
weights. They observe the objects and then then take down notes. What are the engineers doing
Answer: the engineers are performing a tensile test
Explanation:
i took the test and got it right
3. Explain why systems developed as prototypes should not normally be used as production systems.
With an intricate network of nerves and specialized cells called neurons, the nervous system relays information throughout the body.
This is further explained below.
What are prototypes?Generally, Generally speaking, the four statutes that made up the Alien and Sedition Acts were meant to discourage making a public declaration of support for a political party.
the 1798 Declaration of Independence, which restricted immigration and free speech, is an example of anything officially expressed or containing such a declaration. The "Sedition and Alien Acts" were the official names for these regulations.
In conclusion, To begin, prototypes often lack the funds necessary to provide adequate documentation, which makes them difficult to keep up with in the future.
Second, the majority of the time, the codes used in prototypes do not satisfy the quality level established by the business.
Read more about prototypes
https://brainly.com/question/28187820
#SPJ1
What parts of ignition system that produce the high voltage?
Modern petrol engines employ ignition coils in all ignition systems for the same fundamental purpose: to produce the high voltage necessary to ignite a spark at the spark plug.
An electric spark is used in a gasoline engine's ignition system to start the fuel-air combination, which burns in the cylinders to create the motive force.
A storage battery, an induction coil, a device to timing high-voltage discharges from the induction coil, a distributor, and a set of spark plugs are the essential parts of the ignition system. The mechanism converts the low voltage electric current from the storage battery, which is typically 12 volts, to high voltage (some 40,000 volts). The distributor sends the high-voltage pulses in succession to each spark plug in the firing order.
To know more about ignition system:
https://brainly.com/question/14094081
#SPJ4
the heui injector uses what type of force to open and close the nozzle?
The HEUI (Hydraulically-actuated Electronically-controlled Unit Injector) system uses hydraulic force to open and close the nozzle, which is responsible for the injection of fuel into the combustion chamber.
In a HEUI system, the injector is actuated by pressurized engine oil, which is controlled by an electronic solenoid. This combination of hydraulic force and electronic control provides precise fuel delivery, improving engine performance and fuel efficiency.
The key components of the HEUI system are the high-pressure oil pump, electronic control module, and the injectors themselves. The high-pressure oil pump increases the pressure of the engine oil, which is then directed to the injectors. The electronic control module receives signals from various engine sensors and determines the optimal timing and fuel quantity for each injection event.
The HEUI injector has two stages: the intensifier piston and the injector plunger. The pressurized engine oil acts on the intensifier piston, which then exerts force on the injector plunger. The plunger is responsible for pushing fuel through the nozzle and into the combustion chamber. The opening and closing of the nozzle are controlled by the electronic solenoid, which receives commands from the electronic control module.
In summary, the HEUI injector uses hydraulic force, generated by pressurized engine oil, to open and close the nozzle. This system allows for precise control of fuel injection events, resulting in improved engine performance and fuel efficiency.
Learn more about HEUI here:-
https://brainly.com/question/14872817
#SPJ11
Do you know anything about Android graphics?
Android provides a huge set of 2D-drawing APIs that allow you to create graphics.
Android has got visually appealing graphics and mind blowing animations.
The Android framework provides a rich set of powerful APIS for applying animation to UI elements and graphics as well as drawing custom 2D and 3D graphics.
Three Animation Systems Used In Android Applications:-1. Property Animation
2. View Animation
3. Drawable Animation
A site is underlain by a soil that has a unit weight of 118 lb/ft3. From laboratory shear strength tests that closely simulated the field conditions, the total stress parameters were measured to be C total = 250 lb/ft2 and φ total = 29°. Estimate the shear strength on a horizontal plane at a depth of 12 ft below the ground surface at this site in lbs/ sq ft
Answer: the shear strength at a depth of 12 ft is 1034.9015 lb/ft²
Explanation:
Given that;
Weight of soil r = 118 lb/ft³
stress parameter C = 250 lb/ft²
φ total = 29°
depth Z = 12 ft
The shear strength on a horizontal plane at a depth of 12ft
ζ = C + δtanφ
where δ = normal stress
normal stress δ = r × z = 118 × 12 = 1416
so
ζ = C + δtanφ
ζ = 250 + 1416(tan29°)
ζ = 250 + 1416(tan29°)
ζ = 250 + 784.9016
ζ = 1034.9015 lb/ft²
Therefore the shear strength at a depth of 12 ft is 1034.9015 lb/ft²
We have a credit charge that is trying to process but we do not remember signing up and email login is not working? Is there a way to check?
Answer:
Yes
Explanation:
In such a case, one way to check the credit charge is to contact your bank, doing so would allow the bank to check your account properly to determine where the transaction was originated from.
Another way you could check is to contact the online merchant where such a transaction was initiated.
A storage tank for concentrated nitric acid will be constructed from aluminum to resist corrosion. The tank is to have an inside diameter of 6 m and a height of 17 m. The maximum liquid level in the tank will be at 16 m. Estimate the plate thickness required at the base of the tank. Take the allowable design stress for aluminum as 90 /^2.
Answer:
The plate thickness required at the base of the tank is approximately 6.6 mm.
Explanation:
To estimate the plate thickness required at the base of the tank, we need to determine the maximum pressure that the tank will experience at the base. The pressure can be calculated using the formula:
P = ρgh
where P is pressure, ρ is the density of the liquid, g is the acceleration due to gravity, and h is the height of the liquid above the base of the tank.
Assuming a density of 1.5 g/cm³ for concentrated nitric acid, the pressure at the base of the tank can be calculated as:
P = 1.5 x 9.81 x 16 = 235.44 kPa
To determine the plate thickness required, we can use the formula for the hoop stress in a cylindrical vessel:
σ = PD/2t
where σ is the stress, P is the pressure, D is the diameter of the vessel, and t is the thickness of the vessel wall.
Rearranging the formula to solve for t, we get:
t = PD/2σ
Assuming a diameter of 6 m and a design stress of 90 N/mm², the plate thickness required at the base of the tank can be calculated as:
t = (235.44 x 6 x 1000) / (2 x 90 x π) ≈ 6.6 mm
Therefore, the plate thickness required at the base of the tank is approximately 6.6 mm.
Answer:
To determine the plate thickness required at the base of the tank, we can use the following formula:
t = (PD)/(2SE - 0.2P)
where:
t = plate thickness
P = design pressure
D = inside diameter of the tank
S = allowable design stress for aluminum
E = joint efficiency factor
Since the tank will contain concentrated nitric acid, which is a hazardous material, it is subject to specific design and safety regulations that require a detailed engineering analysis. Therefore, we will assume a design pressure of 2.5 psi for this calculation, which is a typical value for atmospheric storage tanks.
The joint efficiency factor for welded aluminum is typically 0.70 to 0.85, depending on the welding procedure and inspection method used. For this calculation, we will assume a joint efficiency factor of 0.80.
Plugging in the given values, we get:
t = (2.56)/(2900.80 - 0.22.5)
t = 0.0682 m
Therefore, the plate thickness required at the base of the tank is approximately 0.0682 m, or 68.2 mm
How does a project differ from an ongoing work effort?
Answer:
Projects have a fixed budget, while operations have to earn a profit to run the business. Projects are executed to start a new business objective and terminated when it is achieved, while operational work does not produce anything new and is ongoing.
Hope this helped!
using data in Appendix A ,calculate the number of atoms in 1 tonne of iron
\(1.0783*10^{28}(atoms).\)
Explanation:Since I don't have access to "Appendix A", I'll solve the problem using data from the periodic table.
1. Determine the molar mass of iron.
According to the periodic table, the molar mass of iron is:
55.845g/mole.
2. Convert 1 tonne to grams.\(1(tonne)*1000=1000kg\\1000kg*1000=1000000g=10^6g\)
3. Apply rule of 3.\(55.845g\) ----------- \(1 mole\)
\(10^6g\) ----------- \(x\)
\(x=\frac{10^6*1}{55.845}=17906.7061(moles)\)
4. Determine the amount of atoms.Considering that there are, approximately, \(6.022*10^{23}\) atoms in a mole of any element, apply another rule of 3.
1 mole --------------------- \(6.022*10^{23}(atoms)\)
\(17906.7061(moles)\) --------------------- x
\(x=\frac{17906.7061*6.022*10^{23}}{1}=1.0783*10^{28}\).
According to a snack cracker manufacturer, a batch of butter crackers has a defect rate of 8%. Suppose a quality inspector randomly inspects 500 crackers. Complete the following statement: The quality inspector should expect defective crackers, give or take how many crackers?
A. 40; 16
B. 60; 16
C. 40; 6
D. 60; 12
Answer:
C
Explanation:
I believe this should b corretc
what scale model proves the initial concept?
Answer: A prototype
Explanation:
The scale model that proves the initial concept is called a domain model.
What is a scale model?A copy or depiction of something where all parts have the same dimensions as the original. A scale model is an image or copy of an object that is either larger or smaller than the object being represented's actual size.
A domain model is a type of conceptual model that is used to depict the structural elements and conceptual constraints within a domain of interest.
A domain model will include all of the entities, their attributes, and relationships, as well as the constraints that govern the conceptual integrity of the structural model elements that comprise that problem domain.
Therefore, a domain model is the scale model that proves the initial concept.
To learn more about the scale model, refer to the below link:
https://brainly.com/question/14341149
#SPJ2
What can make a fan that is propeller is not running again
Example 1.3 An electric circuit is supplied by a voltage represented by the expression v = 240 sin (471,239t) V. Calculate the following: a) The frequency of the supply voltage. the voltage
Answer: 75,000 Hz
Explanation:
To calculate the frequency of the supply voltage, we need to use the formula:
frequency = 1 / time period
where the time period is the time it takes for one complete cycle of the waveform. For a sine wave, the time period is given by:
time period = 2π / angular frequency
where the angular frequency is the rate of change of the angle with respect to time and is given by:
angular frequency = 2π × frequency
Comparing the given voltage expression v = 240 sin (471,239t) V to the general form of a sine wave:
v = Vm sin(ωt + θ)
where Vm is the amplitude, ω is the angular frequency, t is time, and θ is the phase angle, we can see that the amplitude is 240 V, the angular frequency is 471,239 rad/s, and there is no phase angle (θ = 0).
Using the formula for angular frequency, we can find the frequency:
angular frequency = 2π × frequency
471,239 = 2π × frequency
frequency = 471,239 / (2π) ≈ 75,000 Hz
Therefore, the frequency of the supply voltage is approximately 75,000 Hz.
Hope this helps, :^)
a storage tank contains liquid with a density of 0.0361 lbs per cubic inch. the height of liquid in the tank is 168 feet. what is the pressure of the liquid at the bottom of the tank give your answer in psi
Answer:
Objects that float on water have densities less than the density of water; those that do not float on water have densisties greater than the density of water:
Float on water: d < 0.0361 lb/in³ (where d denotes denisity)
Do not float on water: d > 0.0361 lb/in³
Explanation:
I don't know if this works for it or not?
Steam flows steadily through an adiabatic turbine. The inlet conditions of the steam are 10 MPa, 450°C, and 80 m/s, and the exit conditions are 10 kPa, 92% quality, and 50 m/s. The mass flow rate of the steam is 12 kg/s.
Determine:
(a) the change in kinetic energy
(b) the power output
(c) the turbine inlet area
Answer:
a) The change in Kinetic energy, KE = -1.95 kJ
b) Power output, W = 10221.72 kW
c) Turbine inlet area, \(A_1 = 0.0044 m^2\)
Explanation:
a) Change in Kinetic Energy
For an adiabatic steady state flow of steam:
\(KE = \frac{V_2^2 - V_1^2}{2} \\\).........(1)
Where Inlet velocity, V₁ = 80 m/s
Outlet velocity, V₂ = 50 m/s
Substitute these values into equation (1)
\(KE = \frac{50^2 - 80^2}{2} \\\)
KE = -1950 m²/s²
To convert this to kJ/kg, divide by 1000
KE = -1950/1000
KE = -1.95 kJ/kg
b) The power output, w
The equation below is used to represent a steady state flow.
\(q - w = h_2 - h_1 + KE + g(z_2 - z_1)\)
For an adiabatic process, the rate of heat transfer, q = 0
z₂ = z₁
The equation thus reduces to :
w = h₁ - h₂ - KE...........(2)
Where Power output, \(W = \dot{m}w\)..........(3)
Mass flow rate, \(\dot{m} = 12 kg/s\)
To get the specific enthalpy at the inlet, h₁
At P₁ = 10 MPa, T₁ = 450°C,
h₁ = 3242.4 kJ/kg,
Specific volume, v₁ = 0.029782 m³/kg
At P₂ = 10 kPa, \(h_f = 191.81 kJ/kg, h_{fg} = 2392.1 kJ/kg\), x₂ = 0.92
specific enthalpy at the outlet, h₂ = \(h_1 + x_2 h_{fg}\)
h₂ = 3242.4 + 0.92(2392.1)
h₂ = 2392.54 kJ/kg
Substitute these values into equation (2)
w = 3242.4 - 2392.54 - (-1.95)
w = 851.81 kJ/kg
To get the power output, put the value of w into equation (3)
W = 12 * 851.81
W = 10221.72 kW
c) The turbine inlet area
\(A_1V_1 = \dot{m}v_1\\\\A_1 * 80 = 12 * 0.029782\\\\80A_1 = 0.357\\\\A_1 = 0.357/80\\\\A_1 = 0.0044 m^2\)
Searches related to Probability questions - A person frequents one of the two restaurants KARIM or NAZEER, choosing Chicken’s item 70% of the time and fish’s item 30% of the time. Regardless of where he goes , he orders Afghani Chicken 60% of his visits. (a) The next time he goes into a restaurants, what is the probability that he goes to KARIM and orders Afghani Chicken. (b) Are the two events in part a independent? Explain. (c) If he goes into a restaurants and orders Afghani Chicken, what is the probability that he is at NAZEER. (d) What is the probability that he goes to KARIM or orders Afghani Chicken or both?
Answer:
a) 0.42
b) Independent
c) 30%
d) 0.88
Explanation:
Person chooses Chicken's item : 70% = 0.7
Person chooses fish's item : 30% = 0.3
Visits in which he orders Afghani Chicken = 60% = 0.6
a)
Probability that he goes to KARIM and orders Afghani Chicken:
P = 0.7 * 0.6 = 0.42
b)
Two events are said to be independent when occurrence of one event does not affect the probability of the other event's occurrence. Here the person orders Afghani Chicken regardless of where he visits so the events are independent.
c)
P = 0.30 because he orders Afghani Chicken regardless of where he visits.
d)
Let A be the probability that he goes to KARIM:
P(A) = 0.7 * ( 1 - 0.6 ) = 0.28
Let A be the probability that he orders Afghani Chicken:
P(B) = 0.3 * 0.6 = 0.18
Let C be the probability that he goes to KARIM and orders Afghani chicken:
= 0.7 * 0.6 = 0.42
So probability that he goes to KARIM or orders Afghani Chicken or both:
P(A) + P(B) + P(C) = 0.28 + 0.18 + 0.42 = 0.88
The bonus rates for each salesperson are determined by sales amounts using the following scale: Sales greater than $35,000 earn a bonus rate of 5%, sales greater than $25,000 earn a bonus rate of 4%. All other sales (any amount greater than 0) earn a bonus rate of 2%. With the sheets still grouped, in cell C5 use an IFS function to determine the commission rate for the first salesperson whose sales are in cell B5. Fill the formula down through cell C8.
Assuming that cell B5 contains the sales amount for the first salesperson, the IFS function to determine the commission rate in cell C5 is:
=IFS(B5>35000, 0.05, B5>25000, 0.04, B5>0, 0.02)
This formula checks the sales amount in B5 against each threshold amount in descending order (starting with $35,000), and returns the corresponding bonus rate if the sales amount is greater than that threshold. If the sales amount is less than or equal to zero, it returns a bonus rate of 0%.
To fill the formula down through cell C8, select cell C5 and drag the fill handle down to cell C8. This will copy the formula to the other cells in the group, adjusting the cell references as needed.
A plausible Null Hypothesis statement for 2 sample t-test would be?
What are the nominal dimensions for a 1x2 stick of lumber, a 2x4 stick of lumber and a standard sheet of plywood?
The actual dimensions for the given nominal dimensions 1x2 stick of lumber, a 2x4 stick of lumber are;
Actual dimension of 1 x 2 stick of lumber = ³/₄'' × 3¹/₂''
Actual dimension of 2 x 4 stick of lumber = 1¹/₂'' × 3¹/₂''
The nominal dimension for a sheet of plywood is; 4' x 8'
Lumber sticks are sticks made from timber in forms used mainly in building construction as formwork support for the sheets of plywood used.
There could also be other uses of lumber sticks like making of some basic home furniture's but they are primarily used in building construction.
Now, Lumber sticks could come in different nominal dimensions such as;
1 x 4 lumber sticks.1 x 6 lumber sticks.1 x 8 lumber sticks.1 x 10 lumber sticks.1 x 12 lumber sticks.2 x 4 lumber sticks.2 x 6 lumber sticks.2 x 8 lumber sticks.2 x 10 lumber sticks.2 x 12 lumber sticks.Now, in the question, we are dealing with 1x2 stick of lumber and a 2x4 stick of lumber. From general cutting standards in most workshops, the actual sizes are respectively;
Actual size of 1 x 2 stick of lumber = ³/₄'' × 3¹/₂''
Actual size of 2 x 4 stick of lumber = 1¹/₂'' × 3¹/₂''
Now, for a sheet of plywood, the standard size of a sheet of plywood is 4' × 8'.
Read more about sheet of plywood at; https://brainly.com/question/25678463
Un grupo de trabajadores tenia un rendimiento poco satisfactorio. Elena trabajo varias noches para poner por escrito las metas que deberian cumplir sus subordinados. Les especifico a cada uno de ellos su tarea de produccion y les conmino a cumplir a como diera lugar. que tipo de lider es?
Answer:
Elena es una líder de tipo autoritario.
Explanation:
El liderazgo autoritario representa el control individual por parte del líder de la toma de decisiones y el proceso de elección y planificación en una determinada organización.
En este liderazgo no se promueve la participación efectiva del equipo en los proyectos, solo el líder toma todas las decisiones necesarias y generalmente oprime a sus subordinados. Así, genera muchas veces situaciones de tensión y agotamiento entre los empleados y demás subordinados.
describe a process that would satisfy the conservation of energy principle but does not actually occur in nature
The only process I can think of that would satisfy the conservation of energy principle but does not occur in nature is a perpetual motion machine.
Working principle of perpetual motion machinePerpetual Motion Machine would produce work indefinitely without any external input of energy, thus violating the first law of thermodynamics which states that energy cannot be created or destroyed, only converted from one form to another.
While it is theoretically possible to design a machine that appears to produce more energy than it consumes, such a machine cannot exist in reality due to the various energy losses that occur in any real-world system.
These losses can occur due to factors such as friction, heat transfer, and resistance in electrical circuits, among others.
Learn more about conservation of energy here:
https://brainly.com/question/166559
#SPJ1