A new car loan has monthly payments of $482.75. How much money will be paid on the car loan after 3 years?

Answer:

The statements that can be used to compare the characteristics of the functions are:

1. g(x) has the greatest maximum value.

2. All three functions share the same domain.

Explanation:

- The table shows the values of three functions - f(x), g(x), and h(x) - evaluated at different values of x.

- We cannot determine the domain of f(x) or h(x) from the given table but we can see that g(x) has a domain of all real numbers.

- We can see that g(x) has the highest maximum value among the three functions, which is 8.

- We cannot determine the range of f(x) or g(x) from the given table but we can see that h(x) has a range of all negative numbers.

- We cannot say anything about the domain or range of f(x) based on the given table.

- Therefore, the two statements that can be used to compare the characteristics of the functions are: g(x) has the greatest maximum value and all three functions share the same domain.

This DE has characteristic equation

\(4r^2 - 12r + 9r = (2r - 3)^2 = 0\)

with a repeated root at r = 3/2. Then the characteristic solution is

\(y_c = C_1 e^{\frac32 x} + C_2 x e^{\frac32 x}\)

which has derivative

\({y_c}' = \dfrac{3C_1}2 e^{\frac32 x} + \dfrac{3C_2}2 x e^{\frac32x} + C_2 e^{\frac32 x}\)

Use the given initial conditions to solve for the constants:

\(y(0) = 3 \implies 3 = C_1\)

\(y'(0) = \dfrac52 \implies \dfrac52 = \dfrac{3C_1}2 + C_2 \implies C_2 = -2\)

and so the particular solution to the IVP is

\(\boxed{y(x) = 3 e^{\frac32 x} - 2 x e^{\frac32 x}}\)

Answer:

54%

Step-by-step explanation:

Division - - - start by dividing 27 into 50.

27 / 50 = 0.54

To make 0.54 into a percentage, multiply by 100.

0.54 x 100 = 54%.

Answer:

.aabc=amn0#1211

Step-by-step explanation:

nosascoOsasco n=12.8

It will take approximately 25 hours and 1 minute for there to be 150mg of aspirin left in the bloodstream.

We have,

To determine how long it will take for there to be 150mg of aspirin left in the bloodstream, we can use the concept of half-life.

The half-life of aspirin is given as 6 hours, which means that after every 6 hours, the amount of aspirin in the bloodstream reduces by half.

Let's calculate the number of half-lives required to reach 150mg:

Initial amount of aspirin = 625mg

Final amount of aspirin = 150mg

625mg / 150mg = 4.17

This means it will take approximately 4.17 half-lives for the amount of aspirin in the bloodstream to reduce from 625mg to 150mg.

Since each half-life is 6 hours, we can calculate the total time it will take:

Total time = Number of half-lives * Half-life duration

Total time = 4.17 x 6 hours

Total time ≈ 25 hours and 1 minute

Therefore,

It will take approximately 25 hours and 1 minute for there to be 150mg of aspirin left in the bloodstream.

Learn more about expressions here:

https://brainly.com/question/3118662

#SPJ1

Answer:

147 is your answer.

Answer:

-17-40+25

=25-57

= -32

Answer: 132 cm cubed

Step-by-step explanation:

0.5*3*4*2=12

10*5=50

4*10=40

3*10=30

30+40+50+12=132 cm cubed

To prove that there are only these five regular polyhedra, we can consider Euler's polyhedron formula, which states that for any convex polyhedron, the number of vertices (V), edges (E), and faces (F) satisfy the equation V - E + F = 2.

The five regular polyhedra, also known as the Platonic solids, are the only convex polyhedra where all faces are congruent regular polygons, and the same number of polygons meet at each vertex.

The five regular polyhedra are:

1. Tetrahedron: It has four triangular faces, and three triangles meet at each vertex.

2. Cube: It has six square faces, and three squares meet at each vertex.

3. Octahedron: It has eight triangular faces, and four triangles meet at each vertex.

4. Dodecahedron: It has twelve pentagonal faces, and three pentagons meet at each vertex.

5. Icosahedron: It has twenty triangular faces, and five triangles meet at each vertex.

To prove that there are only these five regular polyhedra, we can consider Euler's polyhedron formula, which states that:

"for any convex polyhedron, the number of vertices (V), edges (E), and faces (F) satisfy the equation V - E + F = 2".

For regular polyhedra, each face has the same number of sides (n) and each vertex is the meeting point of the same number of edges (k). Therefore, we can rewrite Euler's formula for regular polyhedra as:

V - E + F = 2  

=>  kV/2 - kE/2 + F = 2  

=>  k(V/2 - E/2) + F = 2

Since each face has n sides, the total number of edges can be calculated as E = (nF)/2, as each edge is shared by two faces. Substituting this into the equation:

k(V/2 - (nF)/2) + F = 2  

=>  (kV - knF + 2F)/2 = 2  

=>  kV - knF + 2F = 4

Now, we need to consider the conditions for a valid polyhedron:

1. The number of faces (F), edges (E), and vertices (V) must be positive integers.

2. The number of sides on each face (n) and the number of edges meeting at each vertex (k) must be positive integers.

Given these conditions, we can analyze the possibilities for different values of n and k. By exploring various combinations, it can be proven that the only valid solutions satisfying the conditions are:

(n, k) pairs:

(3, 3) - Tetrahedron

(4, 3) - Cube

(3, 4) - Octahedron

(5, 3) - Dodecahedron

(3, 5) - Icosahedron

Therefore, there exist only five regular polyhedra.

Learn more about regular polyhedron here:

https://brainly.com/question/29134238

#SPJ1

Your analysis is correct. Here's a summary:

If it is sunny, then it is 80° Fahrenheit. (Original statement)

Converse: If it is 80° Fahrenheit, then it is sunny. (Valid)

If it is 80° Fahrenheit, then it is sunny. (Original statement)

Converse: If it is sunny, then it is 80° Fahrenheit. (Valid)

If it is not sunny, then it is not 80° Fahrenheit. (Original statement)

Converse: If it is not 80° Fahrenheit, then it is not sunny. (Invalid)

Counterexample: A day that is not 80° Fahrenheit and not sunny (e.g., 70° and cloudy).

If it is 80° Fahrenheit, then it is sunny. (Original statement)

Converse: If it is sunny, then it is 80° Fahrenheit. (Invalid)

Counterexample: A day that is 80° Fahrenheit and cloudy.

In cases 1 and 2, the original statements and their converses are valid because the relationship between "sunny" and "80° Fahrenheit" holds in both directions. However, in cases 3 and 4, the converses are invalid because there are counterexamples where the second part of the statement (either "not 80° Fahrenheit" or "cloudy") does not necessarily imply the first part ("not sunny" or "80° Fahrenheit").

how many were there? well, really there were "x", which oddly enough is the 100%, we also know that 40% of "x" is 80, so

\(\begin{array}{ccll} amount&\%\\ \cline{1-2} x & 100\\ 80& 40 \end{array} \implies \cfrac{x}{80}~~=~~\cfrac{100}{40} \\\\\\ \cfrac{ x }{ 80 } ~~=~~ \cfrac{ 5 }{ 2 }\implies 2x=400\implies x=\cfrac{400}{2}\implies x=200\)

Answer:

(a) 56%

(b) 28%

Step-by-step explanation:

Hope this helps! :)

Answer:

The data item is \(X = 580\)

Step-by-step explanation:

Normal Probability Distribution:

Problems of normal distributions can be solved using the z-score formula.

In a set with mean \(\mu\) and standard deviation \(\sigma\), the z-score of a measure X is given by:

\(Z = \frac{X - \mu}{\sigma}\)

The Z-score measures how many standard deviations the measure is from the mean. After finding the Z-score, we look at the z-score table and find the p-value associated with this z-score. This p-value is the probability that the value of the measure is smaller than X, that is, the percentile of X. Subtracting 1 by the p-value, we get the probability that the value of the measure is greater than X.

Mean of 400 and a standard deviation of 60.

This means that \(\mu = 400, \sigma = 60\)

z=3

We have to find X when Z = 3. So

\(Z = \frac{X - \mu}{\sigma}\)

\(3 = \frac{X - 400}{60}\)

\(X - 400 = 3*60\)

\(X = 580\)

The data item is \(X = 580\)

52 square metres

Step-by-step explanation:

we can divide the pathway in to 2 parts to find the area

1st part

length = 12m

breadth = 2m

\(area = 12 \times 2 = {24}^{2}m \)

2nd part

length = 16-2 = 14

breadth = 2

area =

\(area = 14 \times 2 = {28}^{2} m\)

atlast add both areas

52 square metres

Answer:

Step-by-step explanation:

find the area of ​​the horizontal rectangle, add it to the vertical rectangle and remove the common part

2 * 16 + 2 * 12  - 2 * 2 =

52m²

Using the hypergeometric distribution, it is found that there is a 0.2831 = 28.31% probability that exactly one of the containers is from the Florida supplier.

The containers are chosen without replacement, which means that the hypergeometric distribution is used to solve this question.

Hypergeometric distribution:

\(P(X = x) = h(x,N,n,k) = \frac{C_{k,x}C_{N-k,n-x}}{C_{N,n}}\)

\(C_{n,x} = \frac{n!}{x!(n-x)!}\)

The parameters are:

In this problem:

The probability that exactly one of the containers is from the Florida supplier is P(X = 1), hence:

\(P(X = x) = h(x,N,n,k) = \frac{C_{k,x}C_{N-k,n-x}}{C_{N,n}}\)

\(P(X = 1) = h(1,18,3,11) = \frac{C_{11,1}C_{7,2}}{C_{18,3}} = 0.2831\)

0.2831 = 28.31% probability that exactly one of the containers is from the Florida supplier.

A similar problem is given at https://brainly.com/question/24826394

The area of the given triangle is expressed as: 25.6 in²

We are only given two sides of the triangle and an angle and so we must find the length of the third side to be able to find the area. The length of the third side is gotten from cosine rule to get:

a = √(14.1² + 7.2² - 2(14.1 * 7.2)*cos 30.3)

a = 8.68 in

In order for us to calculate the area of triangle which has 3 sides, we will have to utilize the Heron's Formula.

From the formula, the area of a triangle (A) that has 3 sides a, b, and c is calculated via the formula:

A = √[s(s - a)(s - b)(s - c)]

where:

s denotes the semi-perimeter of the specific triangle given by the formula: s = (a + b + c)/2.

s = (8.68 + 14.1 + 7.2)/2

s = 14.99 in

Thus:

Area = √[14.99(14.99 - 8.68)(14.99 - 14.1)(14.99 - 7.2)]

Area = 25.6 in²

Read more about Area of Triangle at: https://brainly.com/question/17335144

#SPJ1

The LCM of 4 and 6 is 12.

Least Common Multiple is a mathematical term. The smallest number that is a multiple of both of two numbers is called the least common multiple.

For example, common multiples of 4 and 6 are 12, 24 and 36, but the lowest of those is 12; therefore, the lowest common multiple of 4 and 6 is 12.

Given:

4: 2 x 2

6: 2 x 3

Now, as there is one 2 common in both then it will be written for one time.

and the rest uncommon numbers are written as same as well.

So, LCM( 4, 6)= 2 x 2 x 3 = 12

Hence, the LCM of 4 and 6 is 12.

Learn more about Least Common Multiple here:

https://brainly.com/question/28932085

#SPJ1

Answer: use mahthway it hels

Step-by-step explanation:

Answer: 16a + 32b  - 8c  

Step-by-step explanation:

8(2a + 4b - c ) = 16a + 32b  - 8c

Multiply 8 by 2a to get 16a

Multiply 8  by 4b to get 32b

Multiply 8 by -c or -1c  to get -8c

Put them together to get 16a + 32b - 8c

Gulf Coast Electronics should order 13,000 capacitors from Boston Components, 50,000 capacitors from Able Controls, and 14,000 capacitors from Lyshenko Industries to obtain 77,000 acceptable-quality reservoir capacitors at a minimum cost of $204,425.

To minimize the total cost of obtaining 75,000 acceptable-quality reservoir capacitors, we can formulate the following linear program:

Objective function:

Minimize: 2.35B + 2.6A + 2.85L

Subject to:

B + A + L = 77000 (total number of capacitors required)

B ≥ 0.1A (at least 10% of the volume given to Able Controls should be awarded to Boston Components)

L ≥ 29500 (at least 29,500 capacitors should be ordered from Lyshenko)

B ≤ 32500 (maximum of 32,500 capacitors should be ordered from Boston Components)

A ≤ 50000 (maximum of 50,000 capacitors should be ordered from Able Controls)

L ≤ 48500 (maximum of 48,500 capacitors should be ordered from Lyshenko)

0 ≤ B, A, L (non-negativity constraints)

Solving this linear program using a linear programming software, we get:

B = 13000

A = 50000

L = 14000

Correct Question :

Gulf Coast Electronics is ready to award contracts to suppliers for providing reservoir capacitors for use in its electronic devices. For the past several years, Gulf Coast Electronics has relied on two suppliers for its reservoir capacitors: Able Controls and Lyshenko Industries. A new firm, Boston Components, has inquired into the possibility of providing a portion of the reservoir capacitors needed by Gulf Coast. The quality of products provided by Lyshenko Industries has been extremely high; in fact, only 0.4% of capacitors provided by Lyshenko had to be discarded because of quality problems. Able Controls has also had a high quality level historically, producing an average of only 1% unacceptable capacitors. Because Gulf Coast Electronics has had no experience with Boston Components, it estimated Boston Components’ defective rate to be 12%. Gulf Coast would like to determine how many reservoir capacitors should be ordered from each firm to obtain 77000 acceptable-quality capacitors to use in its electronic devices. To ensure that Boston Components will receive some of the contract, management specified that the volume of reservoir capacitors awarded to Boston Components must be at least 10% of the volume given to Able Controls. In addition, the total volume assigned to Boston Components, Able Controls, and Lyshenko Industries should not exceed 32500, 50000, and 48500 capacitors, respectively. Because of Gulf Coast’s long-term relationship with Lyshenko Industries, management also specified that at least 29500 reports should be ordered from Lyshenko. The cost per capacitor is $2.35 for Boston Components, $2.6 for Able Controls, and $2.85 for Lyshenko Industries.

Formulate and solve a linear program for determining how many reservoir capacitors should be ordered from each supplier to minimize the total cost of obtaining 75,000 acceptable-quality reservoir capacitors. For subtractive or negative numbers use a minus sign even if there is a + sign before the blank. Enter "0" if your answer is zero. If the constant is "1" it must be entered in the box.

Let B = number of capacitors ordered from Boston Components

Let A = number of capacitors ordered from Able Controls

Let L = number of capacitors ordered from Lyshenko Industries

To learn more about cost here:

https://brainly.com/question/9871118

#SPJ4

Answer:

\(221\)

Step-by-step explanation:

\(2-1+5\times 4\times 11\)

Following PEMDAS, we multiply from left to right first.

\(2-1+20\times 11\)

\(2-1+220\)

Then, we add/subtract from left to right.

\(1+220\)

\(221\)

Answer:

6570

Step-by-step explanation:

18x365=^

The requried only prime polynomial among the given options are 2x²+ 7x + 1, 3x² + 8, and  x²+36.

A polynomial function is a function that applies only integer dominions or only positive integer powers of a value in an equation such as the monomial, binomial, and trinomial, etc. ax+b is a polynomial.

Here,
The first polynomial 2x²+ 7x + 1 cannot be factored therefore it is a prime polynomial.

The second polynomial 5x²-10x + 5 can be factored as 5(x-1)² and is therefore not a prime polynomial.

The third polynomial 3x² + 8 cannot be factored over the integers and is therefore a prime polynomial.

The fourth polynomial 4x²-25 can be factored as (2x-5)(2x+5) and is therefore not a prime polynomial.

The fifth polynomial x²+36 cannot be factored therefore it is a prime polynomial.

Therefore, the only prime polynomial among the given options is 3x² + 8.

Learn more about polynomial functions here:

https://brainly.com/question/12976257
#SPJ1

Answer:

C, 0;-4

Step-by-step explanation:

y=-4 means that no matter what the x value is, the y value will ALWAYS be -4. It does not change based on what x is, and we can tell that just by looking at it because x isn't even in the equation. I've attached an image of that the graph would look like.

The slope of the graph references how many units the y value increases for each increase in the x value. For example, a slope of 1/2 means that each time the x value increases by 2, the y value would increase by 1. But because y's value never changes, the slope is 0. No matter how much the x value changes, the increase in y values will be 0.

Since the y-axis is at where x=0, the y-intercept basically asks, "What is y's value when x is 0?" But like I mentioned before y's value never changes. It's always -4, no matter what the x value is. Therefore, the y-intercept is at -4.

Maureen's pension would be $50,035.20.

What is Percentage?

To compute a percentage, divide the value by the entire amount and multiply the result by 100. A percentage is a quantity or ratio that is stated as a fraction of one hundred. The percent sign, "%," is frequently used to represent it.

First, we need to calculate the average of Maureen's three highest salaries:

Average = (107,000 + 107,800 + 108,198) / 3

Average = 322,998 / 3

Average = 107,666

Next, we need to calculate 1.56% of this average:

Percentage = 1.56% * 107,666

Percentage = 1,667.84

Finally, we multiply this percentage by the number of years worked to find the pension:

Pension = 30 * 1,667.84

Pension = 50,035.20

So, Maureen's pension would be $50,035.20.

To know more about Percentage visit,

https://brainly.com/question/24877689

#SPJ1

Answer: \(2\sqrt{13}-\sqrt{697}\)

Step-by-step explanation:

Since ABD is a right triangle, 14^2 = 12^2 + BD^2

196 = 144 + BD^2

52 = BD^2

BD = \(\sqrt{52} = 2\sqrt{13}\)

ADC is also a right triangle, so 29^2 = 12^2 + DC^2

841 = 144 + DC^2

DC^2 = 697

DC = \(\sqrt{697}\)

Since x = BD + DC,

x = \(2\sqrt{13} +\sqrt{697}\) :>

Answer:

Answer will be 55898.

Step-by-step explanation:

Answer:

-5

Step-by-step explanation:

To find the common difference, take the second term and subtract the first term

-2 - 3 = -5

Check with the third term and the second term

-7 - (-2) = -7 +2 = -5

The common difference is -5