A liquid that has stronger cohesive forces than adhesive forces would have which type of meniscus?A. flatB. concaveC. convexD. parabolic

I agree with Katelyn's statement

Netwon's first law of motion states that an object will remain at rest or in uniform motion except acted upon by an external (unbalanced) force.

When balanced forces are acting on an object in motion, the object maintains its speed and direction.

This means that balanced forces do not change the speed and direction of an object in motion. We can say that the object is in equilibrium. It either remains at rest or in uniform motion.

Therefore, I agree with Katelyn's statement

A small rocket is propelled forward by expelling gas at a rate of 3.63 kg/s and the magnitude of the thrust force of the rocket is 198.198 N.

In order to find the magnitude of the thrust force of a small rocket that is propelled forward by expelling gas at a rate of 3.63 kg/s and an exhaust speed of 54.6 m/s, we can use the formula for thrust force:

Thrust force = mass flow rate x exhaust velocity

Thrust force = 3.63 kg/s x 54.6 m/s

Thrust force = 198.198 N

Therefore, the magnitude of the thrust force of the rocket is 198.198 N.

Learn more about thrust force at

https://brainly.com/question/22339031

#SPJ11

so, 444 eggs would have been released in 37yrs

If a woman releases one egg every month for 37 years, then she releases 444 eggs.

A year is a unit of time that is commonly used to measure the period of time it takes for the Earth to make one revolution around the Sun.

The time it takes for the Earth to complete one orbit around the Sun is approximately 365.24 days, which is why a year is usually defined as 365 days, with an extra day added every four years (in what's called a leap year) to account for the fractional part of the year. This is known as the Gregorian calendar, which is the most widely used calendar system in the world.

A year is also commonly used to refer to the period of time it takes for an event or cycle to repeat, such as the school year, fiscal year, or a company's financial year.

There are 12 months in a year, and they are:

January

February

March

April

May

June

July

August

September

October

November

December

Each month has either 30 or 31 days, except for February which has 28 days (or 29 days in a leap year). The number of days in a month determines the number of days in a year, which is why a year typically has either 365 or 366 days, depending on whether or not it is a leap year.

Here in the question,

37 years is equivalent to 37 x 12 = 444 months (since there are 12 months in a year).

To calculate this, we simply multiply the number of eggs released each month (which is one) by the total number of months:

Number of eggs released = 1 egg/month x 444 months

Number of eggs released = 444 eggs

Therefore, over 37 years, a woman releases 444 eggs.

To learn more about the year click:

https://brainly.com/question/24319982

#SPJ2

Answer:

The mass of the apple is 0.49kg

Explanation:

Potential energy=mgh

P=mgh

6=m×1.22×10

6=12.2m

divide both sides by 12.2

m=6/12.2

m=0.49kg

Answer:

ya daddy is my zaddy

Explanation:

The acceleration of the child is 4 m/s², if the initial velocity of the child is zero and velocity after 3 second is 12 m/sec.

Starting velocity of the child, u = 0

Final velocity of the child, v = 12 m/s

Let the acceleration = a

Time taken to achieve final velocity, t = 3 seconds

First equation of motion describes the relation between the uniform velocity(u), final velocity(v), accelerartion(a) and the time(t).

v = u + at

12 = 0 + a× 3

a = 12/3

a = 4  m/sec²

To know more about acceleration, here

https://brainly.com/question/12550364

#SPJ4

Taking into account the Boyle's law, Charles's law and Gay-Lussac's law, you get:

Boyle's law states that the volume occupied by a given mass of gas at constant temperature is inversely proportional to the pressure: if the pressure increases, the volume decreases, while if the pressure decreases, the volume increases.

Boyle's law is expressed mathematically as

P×V=k

Considering an initial state 1 and a final state 2, it is fulfilled:

P₁×V₁=P₂×V₂

Charles's Law consists of the relationship between the volume and temperature of a certain amount of ideal gas.

This law says that for a given sum of gas at constant pressure, as the temperature increases, the volume of the gas increases, and as the temperature decreases, the volume of the gas decreases: the volume is directly proportional to the temperature of the gas.

Charles's law is expressed mathematically as:

V÷T=k

Considering an initial state 1 and a final state 2, it is fulfilled:

V₁÷T₁=V₂÷T₂

Gay-Lussac's law determines that gas pressure is directly proportional to its temperature when the volume is constant: when there is a constant volume, when the temperature increases, the gas pressure increases and when the temperature decreases, the gas pressure decreases.

Gay-Lussac's law is expressed mathematically as:

P÷T=k

Considering an initial state 1 and a final state 2, it is fulfilled:

P₁÷T₁=P₂÷T₂

In this case, you know:

Replacing in the Boyle's law:

5 atm× 3.5 L= 6 atm×V₂

(5 atm× 3.5 L)÷ 6 atm= V₂

2.92 L= V₂

Finally, the volume will be 2.92 L.

In this case, you know:

Replacing in Gay-Lussac's law:

2 atm÷ 288 K=P₂÷ 303 K

(2 atm÷ 288 K)× 303 K=P₂

2.104 atm= P₂

Finally, the pressure will be 2.104 atm.

In this case, you know:

Replacing in Charles's law:

6 L÷293 K=4 L÷T₂

(6 L÷293 K)× T₂= 4 L

T₂= 4 L÷ (6 L÷293 K)

T₂= 195.33 K

Finally, the temperature will be 195.33 K.

In this case, you know:

Replacing in the Boyle's law:

5.5 atm× 40 L= 8.2 atm×V₂

(5.5 atm× 40 L)÷ 8.2 atm= V₂

52.38 L= V₂

Finally, the volume will be 52.38 L.

In this case, you know:

Replacing in Gay-Lussac's law:

1.5 atm÷ 291 K= P₂÷ 305 K

(1.5 atm÷ 291 K)× 305 K=P₂

1.43 atm= P₂

Finally, the pressure will be 1.43 atm.

Learn more about Boyle's law, Charles's law and Gay-Lussac's law:

brainly.com/question/4147359

#SPJ1

An example of a way to conserve energy in a home is "Replacing old windows with new ones." The correct option is D.

Conserving energy in a home involves reducing energy consumption and improving energy efficiency. Replacing old windows with new ones is an example of improving energy efficiency.

Old windows can be a significant source of energy loss due to poor insulation and air leaks. By replacing them with new, energy-efficient windows that provide better insulation and minimize air leakage, energy consumption can be reduced, making it an effective way to conserve energy in a home.

A. Removing weather-stripping around doorways: Weather-stripping around doorways helps prevent air leaks, which improves energy efficiency by reducing heating or cooling loss. Removing weather-stripping would result in increased energy consumption, making it an incorrect choice.

B. Using old light bulbs: Old light bulbs, such as incandescent bulbs, are less energy-efficient compared to newer, energy-saving options like LED bulbs. Using old light bulbs would result in higher energy consumption, making it an incorrect choice.

C. Reducing the use of insulation: Insulation is an essential component for energy efficiency in homes. It helps to reduce heat transfer and maintain a stable indoor temperature. Reducing the use of insulation would result in increased energy loss and higher energy consumption, making it an incorrect choice.

Therefore, the correct option is D. Replacing old windows with new ones because it improves energy efficiency and helps conserve energy in a home.

To learn more about the conservation of energy click:

brainly.com/question/2137260

#SPJ1

Answer:

\(8.5\frac{m}{s}\)

Explanation:

Use Kinematics:

\(v = v_0 + at\)

\(v = 3 + 1.1 * 5\)

\(v = 8.5 \frac{m}{s}\)

Answer:

I believe its called the periosteum , its a thin , dense membrane that contains  nerves and blood vessels .

Hoped I helped-

Sleepy~

The force that acts in a direction opposite to the motion of the moving object is called drag or air resistance.

Drag or air resistance is a force that acts on a moving object in a fluid medium, such as air or water, opposing its motion. It acts in a direction opposite to the motion of the object and is caused by the friction and pressure differences between the fluid and the object's surface. Drag force increases with the velocity of the object and its surface area, and it's usually modeled as a quadratic function of the velocity. For example, when a car is moving, the air resistance acts in the opposite direction of the car's motion, slowing it down. The drag force is not the only force that acts on the object, but it's one of the most significant forces acting on it, especially for objects moving at high speeds.

To know more about drag force click below:

https://brainly.com/question/12774964#

#SPJ4

Answer:

The volume of a given gas sample is directly proportional to it's absolute temperature at constant pressure. The volume of a given amount of gas is inversely proportional to its pressure when the temperature is held constant.

Explanation:

His final velocity at the end of the 2.6 seconds will be  25.48 m/s

given

time = 2.6 seconds

initial velocity = u = 0

acceleration = acceleration due to gravity = 9.8 \(m/s^{2}\)  (since , it is a free fall )

final velocity = ?

using kinematics equation

v = u + at

v = u - g*t

v = - 9.8 * 2.6 = - 25.48 m/s

His final velocity at the end of the 2.6 seconds will be  25.48 m/s in downward direction

To learn more about kinematics here :

https://brainly.com/question/27126557

#SPJ1

Answer:

B

Explanation:

Nonmetal is better insulator than metals

Answer:

B

Explanation:

Just took the quiz.

The motions of planets against the background stars in our sky are not uniform and follow a complex pattern.

The apparent motion of planets is caused by their orbit around the sun, as well as the rotation of the Earth on its axis. The planets move in an eastward direction relative to the stars, but sometimes they appear to move westward. This is known as retrograde motion and occurs when the Earth overtakes and passes the planet in its orbit around the sun. The pattern of retrograde motion is different for each planet, depending on the length of its orbit and its distance from the sun. The outer planets, such as Jupiter and Saturn, have longer orbits and move more slowly than the inner planets, such as Mercury and Venus.

To learn more about motion click here https://brainly.com/question/22810476

#SPJ11

The steel ball in Challenge example 11.11 did not reach the full 45 degrees because of the air resistance.

When an object moves through the air, it has to overcome the force of air resistance, which opposes the motion of the object. This force is proportional to the surface area of the object and the speed at which it moves through the air. Therefore, the faster an object moves through the air, the more air resistance it experiences.

In the case of Challenge example 11.11, the steel ball was released at an angle of 45 degrees, but as it moved through the air, it experienced air resistance, which slowed it down. As a result, it did not reach the full 45 degrees and only reached an angle of 19 degrees. This is because the force of air resistance acting on the ball increased as it moved through the air, and this force eventually became greater than the force of gravity acting on the ball.

As a result, the ball slowed down and did not reach the full 45 degrees.

Learn more about air resistance here:

https://brainly.com/question/9143942

#SPJ11

Answer:

c

3 half lifes have passed to get to 1/8

1/2 then 1/4 then 1/8

so 15*3

Explanation:

The spectral lines would appear shifted towards the red end of the spectrum.

Spectral lines :

When the light of a star is separated into its various colors, it is known as a spectrum.

Each element produces a characteristic set of lines at specific wavelengths, known as its spectral lines, when it is heated to a high temperature.

If a substance's spectrum is split into a band of light, the band will contain dark lines at particular wavelengths, referred to as spectral lines.

Spectral lines can be used to determine the composition, temperature, and motion of stars.

When the same two elements were detected in a distant star that was moving away from Earth, the spectral lines would appear to be shifted toward the red end of the spectrum.

This phenomenon is known as redshift.

Redshift is a phenomenon in which the wavelength of light emitted by an object moving away from an observer is stretched, resulting in a shift towards the red end of the spectrum.

It happens because the object's motion is causing the wavelength of the light waves to become longer as they travel through space.

It is due to the Doppler effect, which results in a shift in the wavelength of the light that is emitted or absorbed by a celestial object.

The Doppler effect is the change in frequency or wavelength of a wave in relation to an observer's motion.

When an object is moving closer to an observer, it appears to have a higher pitch or shorter wavelength.

When the object is moving away from the observer, it appears to have a lower pitch or longer wavelength.

For similar question on spectral.

https://brainly.com/question/28490374

#SPJ11

Answer:

13 j

Explanation:

I took the test and got it wrong lol

The height of the liquid column is 4.08 metres.

The peak of the liquid column is 4.08 metres.

As we realize that any liquid exerts a strain at a factor relies upon on the density of the liquid and the vertical intensity. depth is given = h and the acceleration because of gravity is g.

calculation:-

pressure = ρgh

ρ = density of the liquid

g = accaleration due to gravity

h = depth from the surface

l = 500kg/m3

p = 20,000

g = 9.8 ms-2

20,000Pa= 500*9.8*h

h=4.08m

The stress is the measure of pressure acting on a unit region. Density is the measure of the way intently any given entity is packed, or it is the ratio of the mass of the entity to its extent. The relation between strain and density is direct. exchange in stress will be contemplated in a exchange in density and vice-versa.

Learn more about pressure here: https://brainly.com/question/25736513

#SPJ2

Sounds are reflected best when bounced off the flat surfaces.

A sound wave is produced when a medium begins to vibrate. When an entity vibrates, a pressure wave is formed, which causes sound.

Since sound waves cannot easily pass through hard surfaces, they bounce off them instead, reflecting back to the source which they first came from.

When sound is reflected off of flat surfaces, it does so most effectively.

Hence the flat surface is the correct answer.

To learn more about the sound wave refer to;

https://brainly.com/question/11797560

#SPJ1

The correct terms that fills the box are;

(i) The incident ray

(ii) The normal

(iii) The reflected ray

(iv) The angle of incident

(v) The reflected angle

The terms of the ray diagram is illustrated as follows;

(i) This arrow indicates the incident ray, which is known as the incoming ray.

(ii) This arrow indicates the normal, a perpendicular line to the plane of incidence.

(iii) This arrow indicates the reflected ray; the out going arrow.

(iv) This the angle of incident or incident angle.

(v) This is the reflected angle or angle of reflection.

Learn more about ray diagram here: https://brainly.com/question/15506795

#SPJ1

Answer:

hello! Jaesuk~Sakai here!

Explanation:

The four group 3 elements are scandium, yttrium, lanthanum and actinium. “lanthanide” refers to the elements between lanthanum and lutetium. That term does not encompass scandium and yttrium. Scandium and yttrium act pretty much identically to lanthanides.

happy to help!!

Remember to always stay happy no matter what happens! ^^

On average, rural communities in the US have higher poverty rates, higher average age, and higher unemployment is true.

These factors can increase their vulnerability to climate change. Higher poverty rates can limit the resources available for adaptation measures and recovery efforts. Additionally, a higher average age can affect the resilience of these communities, as older individuals may have less mobility and capacity to cope with climate change impacts.

Lastly, higher unemployment rates can exacerbate financial struggles, making it more challenging for these communities to invest in infrastructure and other protective measures. Therefore, the combination of these factors can make rural communities more vulnerable to the effects of climate change.

To learn more about, Average

https://brainly.com/question/29483294

#SPJ11

Answer:

heuristic.

Explanation:

Psychology can be defined as the scientific study of both the consciousness and unconsciousness of the human mind such as feelings, emotions and thoughts, so as to understand how it functions and affect human behaviors in contextual terms.

This ultimately implies that, psychology focuses on studying behaviors and the mind that controls it.

A heuristic is an automatic mental shortcut or rule of thumb that avail people the opportunity to make quick and efficient judgement in decision-making process, as well as proffering solutions to a problem. Thus, it allows people to make decisions, pass probability judgement or proffer solutions to problem quickly and efficiently while applying minimal mental effort.

Basically, a heuristic helps an individual to shorten the decision-making time while paying less attention on thinking of his or her next course of action.

Hence, when you're advised to try working backward from the desired goal to the starting point or current state. This advice describes a heuristic.

Wave variables

In the section on motion in two dimensions, we defined the phrases below to describe harmonic motion:

The amount by which a moving object deviates from its equilibrium position is known as its amplitude.

The number of events per unit of time is known as frequency.

Period is how long an oscillation lasts.

The underlying relevance of each of these factors for waves is the same. But it's helpful to express the ideas in a way that expressly mentions waves: Amplitude is the distance a wave travels between its resting state and its maximum movement.

The quantity of waves that pass by a specific location each second is known as its frequency.

Period is the length of time a wave cycle lasts.

In addition to their wave length and wave velocity, waves are determined by amplitude, frequency, and period.

To know more about Wave variables refer to https://brainly.com/question/23462047

#SPJ9

Answer:

232 N

Explanation:

By Hooke's law, the force applied to a spring is proportional to the stretch of the spring, so

F = kx

Where F is the force, k is the spring constant and x is how much it is stretched.

So, replacing k by 58N/cm and x by 4 cm, we get

F = (58 N/cm)(4 cm)

F = 232 N

Therefore, the force applied is 232 N

Answer:

In the human thoughts, there is possible and impossible. In God's world everything is possible. If you keep thinking this you'll never start to study. Just get up, open the book and start to study like you do. Believe in yourself!

The breakdown electric field of polyethylene foam alone cannot be used to estimate the highest voltage that can be applied to the wire before it breaks down.

The biggest electrical potential difference that a system can withstand without experiencing harm or failure is known as the maximum voltage. As exceeding the maximum voltage can lead to electrical failure, fire, or even harm, it is crucial in the design and operation of electrical and electronic devices. The design, manufacturing method, and material properties of the device, as well as the environment in which it will be utilised, all influence the maximum voltage. It is crucial to follow the manufacturer's recommendations for maximum voltage and to routinely test and maintain equipment to make sure it is operating within its limitations in order to ensure safe operation.

Learn more about Maximum voltage here:

https://brainly.com/question/29850601

#SPJ4