A conductor is distinguished from an insulator with the same number of atoms by the number of:_____.

The substance in the image above would be classified as a mixture of elements (option E).

A compound is a substance formed by chemical bonding of two or more elements in definite proportions by weight.

On the other hand, a mixture is made when two or more substances are combined, but they are not combined chemically.

According to this question, an image is shown with two different substances or elements as distinguished by coloration (white and purple). These elements are combined but not chemically bonded, hence, is a mixture.

Learn more about mixture at: https://brainly.com/question/12160179

#SPJ1

Taking into account the definition of calorimetry and sensible heat, the heat added to the system is 331.2 cal.

Calorimetry is the measurement and calculation of the amounts of heat exchanged by a body or a system.

Sensible heat is defined as the amount of heat that a body absorbs or releases without any changes in its physical state (phase change).

So, the equation that allows to calculate heat exchanges is:

Q = c× m× ΔT

where:

In this way, between heat and temperature there is a direct proportional relationship.

In this case, you know:

Replacing in the expression to calculate heat exchanges:

Q= 0.23 \(\frac{cal}{gC}\)× 24 g× 60 C

Solving:

Q= 331.2 cal

In summary, the heat added to the system is 331.2 cal.

Learn more about calorimetry:

brainly.com/question/11586486

brainly.com/question/24724338

#SPJ1

Answer:

In 1831, when Darwin was just 22 years old, he set sail on a scientific expedition on a ship called the HMS Beagle. He was the naturalist on the voyage. As a naturalist, it was his job to observe and collect specimens of plants, animals, rocks, and fossils wherever the expedition went ashore.

The strongest type of intermolecular force between solute and solvent in the solution of CH\(_{3}\)Cl (g) in CH\(_{3}\)OCH\(_{3}\) (g) is dipole-dipole interaction.

In  CH\(_{3}\)Cl, the molecule has a polar covalent bond between carbon and chlorine atoms. Chlorine is more electronegative than carbon, resulting in a partial negative charge on chlorine and a partial positive charge on carbon. In  CH\(_{3}\)OCH\(_{3}\) , the molecule is also polar due to the oxygen atom's higher electronegativity compared to carbon and hydrogen. This creates a dipole moment in both molecules.

In the solution, the positive end of the  CH\(_{3}\)Cl molecule interacts with the negative end of the  CH\(_{3}\)OCH\(_{3}\) molecule, forming dipole-dipole interactions. These intermolecular forces are stronger than London dispersion forces, which are present in all molecules but are typically weaker. Therefore, the strongest intermolecular force in this solution is dipole-dipole interaction.

You can learn more about dipole-dipole interaction at

https://brainly.com/question/30437731

#SPJ11

The molality of the solution is 0.269 m.

To solve this problem, you need to use the equation for the freezing point depression of an aqueous solution: ΔT_f = K_f * molality, where ΔT_f is the change in freezing point, K_f is the freezing point depression constant, and molality is the concentration of the solute in the solution.

For an aqueous solution, the freezing point depression constant, K_f, is equal to the molal freezing point depression constant, K_f', multiplied by the number of kilograms of solvent, which is equal to 1 in this case.

Therefore, the equation for this problem becomes: ΔT_f = K_f' * molality

Substituting the known values into this equation gives:

-0.50 °C = (1.86 °C/m) * molality

Solving for molality gives: molality = -0.50 °C / (1.86 °C/m) = 0.269 m

Therefore, the molality of the solution is 0.269 m.

Learn more about molality at:

https://brainly.com/question/24065939

Single displacement reactions replace a portion of another chemical species, which is the primary distinction between them and double displacement reactions.

The negative and positive ion of two ionic compounds swap positions during a double-replacement reaction to create two new compounds. A double-replacement reaction, also known as a double-displacement reaction, has the general formula AB+CDAD+CB.

When a portion of two ionic compounds is swapped, a double displacement reaction takes place, creating two new components. A twofold displacement reaction follows this pattern. In aqueous solutions, where ions precipitated and exchange occurs, double displacement processes are most common.

To know more about Double displacement reaction visit:

https://brainly.com/question/13854110

#SPJ4

A single displacement reaction occurs when one element replaces another in a chemical reaction, and a double displacement reaction occurs when two ionic species are swapped between two molecules in a chemical reaction.

One element in a compound is switched out for another in a single replacement reaction. In a double-replacement process, the anions or cations of two electrolytes are switched.

Chemical compounds known as ions are kept together by electrostatic interactions known as ionic bonding to form ionic compounds. Despite having both positively and negatively charged ions—known as cations and anions, respectively—the molecule is generally neutral.

To know more about Single displacement reaction visit on:

https://brainly.com/question/3172917

#SPJ4

Its is different because Iron-59 contains 33 neutrons. We also call it the same because it has 26 protons.

Due to its 33 neutrons, iron-59 differs from other iron isotopes. Due to the fact that all isotopes have 26 protons, they are all the same.

What are Isotopes?
Isotopes two or more forms of the same element that contain equal numbers of protons but different numbers of neutrons in their nuclei, and hence differ in relative atomic mass but not in chemical properties; in particular, a radioactive form of an element.

Hence, Iron-59 is different form other isotopes of iron because it contains 33 neutrons. It is the same as other isotopes because they all contain 26 protons.

To learn more about Isotopes click on the given link,

https://brainly.com/question/14220416
#SPJ13

Given metallic chloride formula =MCl3

It belongs to Nitrogen(N) family.

But the condition is that its transition element.

EC given by

\(\\ \sf\longmapsto 1s^22s^22p^63s^23p^64s^23d^3\)

\(\\ \sf\longmapsto [Ar]3d^3\)

Answer:

I cant really see the individual problems very well but i hope this helps

Explanation:

Decomposition = one thing -> 2 or more things

Synthesis= 2 or more things -> 1 thing

Answer:

b

Explanation:the shell is 2 so ignore the 1s electrons it is only the level 2 electrons that are valence

Propane reacts with oxygen producing carbon dioxide and water. This reaction is called combustion. The balanced chemical equation is written as follows:

\(\rm C_{3}H_{8} + 5O_{2} \rightarrow 3CO_{2} + H_{2}O\)

Combustion is a type of reaction in which a gas reacts with the atmospheric oxygen forming carbon dioxide gas and water. Combustion is an exothermic thus, evolves heat energy to the surroundings.

Hydrocarbon gases such as propane easily undergoes combustion. Propane is C₃ H₈. Thus, the product side must have 3 carbons and 8 hydrogens.

The balanced chemical equation of the combustion reaction of propane is as written above. One  mole of propane reacts with 5 moles of oxygen gas giving 3 moles of carbon dioxide and 4 moles of water.

Find more on combustion:

https://brainly.com/question/15117038

#SPJ1

Answer:

1Al₄C₃ + 12H₂O → 3CH₄ + 4Al(OH)₃

Explanation:

SOLUTION :-

Balance it by using 'hit & trial' method , and you'll get the answer :-

1Al₄C₃ + 12H₂O → 3CH₄ + 4Al(OH)₃

VERIFICATION :-

In reactant side of equation :-

In product side of equation :-

Number of atoms of each element is equal in both reactant & product side of equation. Hence , the equation is balanced.

Add the bigger number twice or double it and then subtract 1 from it.

Doubles minus one is a strategy used to add two consecutive numbers. That is when two numbers are next to each other. Simply add the larger number twice, or double it and subtract 1 to get the final result. For example, here the consecutive numbers 7 and 8 are added using the double minus one strategy.

So the fact that the product of two negative numbers is positive is related to the fact that the reciprocal of a positive number return that positive number. Doubles Minus one is a strategy used to add two consecutive numbers. That is when two numbers are next to each other. Simply add the larger number twice or double it and subtract 1 to get the final result.

Learn more about Doubles minus one here:-https://brainly.com/question/6001585

#SPJ4

Answer:

(CH3COO)2 + redP + Cl2 → ClCH2COOH + HCl

Explanation:

This is an example of halogenation of carboxylic acids at alpha carbon atom. In this reaction, red phosphorus and chlorine are treated with carboxylic acids having alpha hydrogen atom followed by hydrolysis to form alpha chloro carboxylic acid.

Option C: all of the above are false because vacancy concentration is exponentially dependent on temperature.

Temperature affects flaws that are vacant. Mathematically, the number of vacancies in a specific volume of a solid at a specific temperature can be stated as follows: At a specific temperature, \(N_{v}\) is the total number of vacancies per unit volume of solid (vacancies/\(m^{3}\)):

\(N_{v}\) = exp(−ΔGv/RT)

Vacancy concentration is, thus, not independent of temperature, but rises with it. Also, it is not necessary that vacancies will only be present at high temperatures only but can also be present at relatively low temperatures so as to make the crystal in equilibrium. Hence, all of the given statements are false.

When an atom is absent from its original lattice location, a vacancy is created. As a result, vacancy results in the vacant lattice site shown below. Vacancy is a zero-dimensional flaw, just as other points of defects. The tension between the nearby atoms is caused by the vacancy defect. The vacancy defect causes the density of the crystalline solid to decrease since there are fewer atoms present.

To know more about crystalline solids, refer:

https://brainly.com/question/14101276

#SPJ4

Answer:

D

Explanation:

Answer:

Using glucose to provide energy for the body

Explanation:

3.3 g of SO₂  is a larger quantity in moles.

Mole, also spelled mol, in chemistry, a standard scientific unit for measuring large quantities of very small entities such as atoms, molecules, or other specified particles.

The mole designates an extremely large number of units, 6.02214076 × \(10^{23}\). The General Conference on Weights and Measures defined the mole as this number for the International System of Units (SI) effective from May 20, 2019. The mole was previously defined as the number of atoms determined experimentally to be found in 12 grams of carbon-12.

The number of units in a mole also bears the name Avogadro’s number, or Avogadro’s constant, in honour of the Italian physicist Amedeo Avogadro (1776–1856). Avogadro proposed that equal volumes of gases under the same conditions contain the same number of molecules, a hypothesis that proved useful in determining atomic and molecular weights and which led to the concept of the mole.

Learn more about mole

https://brainly.com/question/1427235

#SPJ4

The p-value is greater than the significance level of 0.05, we do not reject the null hypothesis and conclude that all proportions are equal.

Firstly, let us conduct a Chi-square test of independence of categorical variables based on the information given above. We have three different cases of hypothesis testing that we have to solve one by one.

Case 1: HD​:pSun ​=rhoMan ​=pTue ​=pWed ​=pThu ​=pFri ​=pSat ​=71​
Ha​ : Not all proportions are equal.

Test Statistic
For this hypothesis, we need to compute the test statistic that is given as:
\($$\chi^2=\sum_{i=1}^{k}\frac{(O_i-E_i)^2}{E_i}$$\)  where k is the number of groups/categories. Since we have 7 days of the week, \(k = 7. $O_i$ and $E_i$\) are the observed and expected frequencies respectively.  
Here, we have equal proportions of 71 for each day of the week.
Therefore, the expected frequencies are also equal to 71.
\($$E_i = 71, i=1,2,3,4,5,6,7.$$\)

We also have to use the given information to compute the observed frequencies,
\($O_i$.$$O_1 = 90, O_2 = 99, O_3 = 122, O_4 = 123, O_5 = 130, O_6 = 160, O_7 = 126$$\)

Therefore, the test statistic can be computed as \($$\chi^2=\frac{(90-71)^2}{71} + \frac{(99-71)^2}{71} + \frac{(122-71)^2}{71} + \frac{(123-71)^2}{71} + \frac{(130-71)^2}{71} + \frac{(160-71)^2}{71} + \frac{(126-71)^2}{71}$$$$\chi^2=180.14\)

Now we have to find the p-value of this test. Since the number of degrees of freedom is k - 1 = 7 - 1 = 6, the p-value can be found using the chi-square distribution table with 6 degrees of freedom at the 0.05 significance level. The p-value is 0.000014. ConclusionSince the p-value is less than the significance level of 0.05, we reject the null hypothesis and conclude that not all proportions are equal.

The total number of accidents is \($$90+99+122+123+130+160+126=850$$\)

The percentage of accidents occurring on each day of the week can be found as follows:
\($$Sunday: $$\frac{90}{850}\times 100 = 10.59\%$$Monday: $$\frac{99}{850}\times 100 = 11.65\%$$Tuesday: $$\frac{122}{850}\times 100 = 14.35\%$$Wednesday: $$\frac{123}{850}\times 100 = 14.47\%$$Thursday: $$\frac{130}{850}\times 100 = 15.29\%$$Friday: $$\frac{160}{850}\times 100 = 18.82\%$$Saturday: $$\frac{126}{850}\times 100 = 14.82\%$$\)

From the above percentages, we can see that Friday has the highest percentage of traffic accidents.

Case 2:
HD​: Not all proportions are equal.

Ha​:pSun ​=pMon ​=pTue ​=rhoWed ​=pThu ​=rhoFri ​=rhoSat ​=71

Test Statistic

\($$E_1 = 78.57, E_2 = 86.57, E_3 = 106.86, E_4 = 107.43, E_5 = 113.57, E_6 = 139.43, E_7 = 109.14$$\)

We already know the observed frequencies,
\($$O_1 = 90, O_2 = 99, O_3 = 122, O_4 = 123, O_5 = 130, O_6 = 160, O_7 = 126.$$\)

The test statistic can be computed as:

\($$\chi^2=\frac{(90-78.57)^2}{78.57} + \frac{(99-86.57)^2}{86.57} + \frac{(122-106.86)^2}{106.86}+ \frac{(123-107.43)^2}{107.43} + \frac{(130-113.57)^2}{113.57} + \frac{(160-139.43)^2}{139.43} + \frac{(126-109.14)^2}{109.14} $$$$ \implies \chi^2=34.98$$\)
The p-value is 0.000001.
Conclusion- Since the p-value is less than the significance level of 0.05, we reject the null hypothesis and conclude that not all proportions are equal.

Case 3:

All proportions are equal.
Test Statistic
The expected frequency for each group is
\(E = \frac{850}{7} = 121.43\)
We already know the observed frequencies,
\($$O_1 = 90, O_2 = 99, O_3 = 122, O_4 = 123, O_5 = 130, O_6 = 160, O_7 = 126.$$\)

The test statistic is,

\($$\chi^2=\frac{(90-121.43)^2}{121.43} + \frac{(99-121.43)^2}{121.43} + \frac{(122-121.43)^2}{121.43} + \frac{(123-121.43)^2}{121.43} + \frac{(130-121.43)^2}{121.43} + \frac{(160-121.43)^2}{121.43} + \frac{(126-121.43)^2}{121.43}} \\\implies \chi^2=9.17$$\)

The p-value is 0.1664.

Since the p-value is greater than the significance level of 0.05, we do not reject the null hypothesis and conclude that all proportions are equal.

To know more about p-value visit:

https://brainly.com/question/30761573

#SPJ11

Answer:

The answer is the layer of the sun that radiates energy outwards from the sun core

Explanation:

the reason why that is becuase the convection zone is a layers which is unstable to convection. And energy is primarily or partially transported by convection

Answer:

D

Explanation:

Answer:

The ionic charge of the elements changes from positive to negative

Answer:

Nucleus, golgi apparatus, cell membrane

Answer:

Eukaryotic Cell Structure

However, unlike prokaryotic cells, eukaryotic cells have: a membrane-bound nucleus. numerous membrane-bound organelles (including the endoplasmic reticulum, Golgi apparatus, chloroplasts, and mitochondria) several rod-shaped chromosomes.

If the hydrogen gas is combusted and produces 645L of water vapor at 400 kelvin and 1.75 atm, 2796.96 g mass of the zinc is produced .

Using the ideal gas law equation:

PV = nRT

n = (PV) / (RT)

= (1.75 atm * 645 L) / (0.0821 atm·L/(mol·K) * 400 K)

= 42.71 moles

the balanced equation for the reaction between zinc and hydrochloric acid:

Zn + 2HCl -> \(ZnCl_{2}\)  + \(H_{2}\)

1 mole of zinc produces 1 mole of hydrogen gas. Therefore, the moles of zinc are also 42.71.

The molar mass of zinc is 65.38 g/mol.

Mass of zinc = moles of zinc * molar mass of zinc

= 42.71 moles * 65.38 g/mol

= 2796.96 g

Therefore, the mass of the zinc is 2796.96 grams.

learn more about hydrogen gas :

https://brainly.com/question/30829657

1. The creature is the Porcupine

2. He lived in Sri Lanka

3. The temple in Manish Gandir

4. It is in the excited state

5. Carbon can share four electrons

6. Alcohol is soluble in water.

Nascent hydrogen is the term used to describe hydrogen atoms or molecules that are created during specific chemical reactions and are in a highly reactive condition. The word "nascent" refers to something that is new or just created, implying that the hydrogen is in a highly reactive state right away.

Nascent hydrogen is often produced by processes like the electrolysis of water or the interaction of a metal with an acid.

Learn more about nascent hydrogen:https://brainly.com/question/28227118

#SPJ1

Answer:

Carbon dating is based on the principle that carbon-14 decays at a constant rate over time. The half-life of carbon-14 is 5,700 years, which means that the amount of carbon-14 in a sample will decrease by half every 5,700 years.

If carbon-14 did not decay at a constant rate, then carbon dating would not work as a reliable method for determining the age of materials. The accuracy of carbon dating relies on the assumption that the rate of carbon-14 decay is constant and has been for thousands of years. If this assumption were to be incorrect, then the estimated ages of materials determined through carbon dating would also be incorrect.

However, it is important to note that carbon-14 decay has been shown through numerous experiments to be a constant process. As such, the rate of carbon-14 decay is not expected to change in the future, and carbon dating is a reliable method for determining the age of materials that contain carbon.

ALLEN

Answer:

The answer I believe is B. Erosion

Explanation:

Just sounds better than all the other choices.

Answer:

erosion b

Explanation:

it breaks down the rocks i remembered this in 4th grade :)

9-Fluorenol is expected to have a lower Rf value on a silica gel plate compared to 9-fluorenone.

This is because fluorenol is an alcohol, which is more polar than the ketone fluorenone. This means that it will take longer for the fluorenol to travel up the plate, resulting in a lower Rf value.

The higher polarity of fluorenol compared to fluorenone results in a stronger interaction between it and the silica gel plate. This stronger interaction increases the retention time of fluorenol on the plate, making it take longer to move up the plate and thus resulting in a lower Rf value.

Learn more about Rf value:

https://brainly.com/question/17751879

#SPJ4

Answer:

2.coefficient how many molecules of Aluminum hydroxide there are

I uploaded the answer to a file hosting. Here's link:

tinyurl.com/wpazsebu