A compound with a molar mass of
312.2 g/mol contains 69.23% C, 3.85% H, and
26.92% N. What is the molecular formula of
this compound?

Answer: "C the long-term survival of an entire species of organisms."

Explanation:

A - Yes, reproduction of the species is part of Evolution, it is not the best answer for the question taking into account the other possible answers.

B - Evolution is not necessarily a short-term thing, Evolution occurs over a long period of time.

C - *Refer to the explanation above.*

D - This answer has more to do with Ecosystems, rather than Evolution/Natural Selection.

Answer:

Pollution

•The number of trips one takes in a car should be reduced.

•Reduce or eliminate fireplace and wood stove use.

•Burning leaves, trash, and other materials should be avoided.

•Using gas-powered lawn and garden equipment should also be avoided.

In an ecosystem, pollution is  a human activity that impacts the land negatively.Minimum use of vehicles and emission of smoke can help reduce the effects caused by the activity.

An ecosystem is defined as a system which comprises of all living organisms and the physical components with which the living beings interact. The abiotic and biotic components are linked to each other through  means of nutrient cycles and flow of energy.

Energy enters the ecosystem through the process of photosynthesis .Animals play an important role in transfer of energy as they feed on each other.As a result of this transfer of matter and energy takes place through the ecosystem .Living organisms also influence the quantity of biomass which is  present.By decomposition of dead plants and animals by microbes nutrients are released back in to the soil.

Learn more about ecosystem,here:

https://brainly.com/question/13979184

#SPJ2

Answer:

1)0.5

3)1.7g

4)32g

5)1.12L

Answer:

i think is probably A

Explanation:

because at constant temperature, the product of the pressure and volume of a given mass of and ideal gass in a closed system is always constant

Answer:

I believe the answer is A or D

Explanation:

I hope this helps you out!

Both option C (NH3(aq) with HClO3(aq)) and option D (LiOH(aq) with HClO4(aq)) will result in a titration curve with an equivalence point with pH > 7.

This is because the strong acid (HClO3 and HClO4) will be neutralized by the weak base (NH3 and LiOH) resulting in a basic solution at the equivalence point. The other options (A and B) will result in an acidic solution at the equivalence point since the strong acid will fully ionize and neutralize the weak base. It's important to note that the pH at the equivalence point depends on the strength of the acid and base used in the titration. NH3(aq) with HClO3(aq). This is because NH3 is a weak base and HClO3 is a strong acid. At the equivalence point, the weak base NH3 will react with the strong acid HClO3, forming NH4+ and ClO3- ions. The NH4+ ion can partially hydrolyze water, producing OH- ions, which increases the pH above 7. The other reactions involve strong acids with strong bases or weak acids with strong bases, resulting in pH levels around 7 or lower.

To know more about titration visit:

https://brainly.com/question/31870069

#SPJ11

Infectious or potential infectious waste must be stored in a leak-proof and covered container. This is important in order to prevent the spread of any harmful pathogens or contaminants that may be present in the waste.


A leak-proof container ensures that any liquids or fluids from the waste do not seep out and contaminate the surrounding area. Meanwhile, a covered container prevents any airborne pathogens from being released and potentially infecting individuals who come into contact with the waste.

Infectious/potentially infectious waste, also known as biohazardous waste, can pose a risk to public health and the environment if not properly contained and disposed of. Storing this type of waste in a leak-proof, covered container helps prevent the spread of harmful microorganisms, reduces the risk of accidental exposure, and maintains a safe and clean environment for everyone.

To know more about potential visit:

https://brainly.com/question/31148592

#SPJ11

Answer:

1.65485688 × 10121 grams

Explanation:

Aside from those discrete items, anything like rice or flour can be measured out to make up 100 grams. For example, 1/2 cup (125 ml or about 4 and 1/2 fl. oz) of dry rice weighs very close to 100 grams.

Answer:

0.25

Explanation:

no.of moles =10/40

Answer:

77%

Explanation:

percent yield is the actual yield divided by the theoretical (predicted) yield, then multiplied by 100 to get a percentage.

34/44 = 0.77

0.77 x 100 = 77%

"All zero greenhouse gas emission fuel sources are also renewable". The statement is false.

While many renewable energy sources such as solar, wind, and hydropower produce zero greenhouse gas emissions, not all zero-emission fuels are renewable.

For example, nuclear power is a zero-emission source of electricity, but it is not considered a renewable energy source because it relies on the mining and processing of non-renewable uranium.

Renewable energy sources are defined as those that can be replenished naturally and sustainably within a human timescale. These include solar, wind, hydropower, geothermal, and biomass. Zero-emission fuels refer to any fuel source that emits no greenhouse gases during use, such as hydrogen fuel cells.

While renewable energy sources often overlap with zero-emission fuels, not all zero-emission fuels are renewable. Therefore, it is important to differentiate between the two terms when discussing the sustainability and environmental impact of different energy sources.

Visit here to learn more about greenhouse gas:

brainly.com/question/12684997

#SPJ11

They have same mass

Explanation:

If you think wisely 100 pounds and 100 pounds have the same weight so the answer is equal

Based on factors that affect the rates of chemical reactions, the trend expected in the table is that as the volume of sodium thiosulfate in water increases, 1) 5 mL 50 mL 0 mL 19 seconds

what is sodium thiosulfate ?

Sodium thiosulfate (Na2S2O3) is a salt composed of sodium, sulfur, and oxygen atoms. It is a colorless, crystalline solid that dissolves in water and has a variety of uses in different fields.

One of the most common uses of sodium thiosulfate is as a photographic fixer, where it is used to remove unexposed silver halide from photographic films and papers. It is also used as a neutralizing agent for chlorine and other oxidizing agents in water treatment, as a dechlorinating agent in the treatment of wastewater, and as a reagent in the laboratory for different chemical reactions.

Based on factors that affect the rates of chemical reactions, the trend expected in the table is that as the volume of sodium thiosulfate in water increases (

As the concentration of sodium thiosulfate increases, the frequency of effective collisions between the reactant molecules and the likelihood of successful collisions increases, resulting in a faster reaction rate. Therefore,

Flask 1 -- 1) 5 mL 50 mL 0 mL 19 seconds(with the highest concentration of sodium thiosulfate) should have the shortest time taken for the cross to become invisible, and

Flask 4 -- 4) 5 mL 20 mL 30 mL(with the lowest concentration of sodium thiosulfate) should have the longest time taken for the cross to become invisible.

To learn more about sodium thiosulfate follow the given link: https://brainly.com/question/14960336

#SPJ1

Answer:

Where are the answer choices

?

To find the percent composition of Carbon in a substance, you need to calculate the percent of the total mass that is made up of Carbon.

The first step is to add up the masses of all the elements in the substance to get the total mass:

2.59 g Carbon + 39.56 g Sulfur + 43.03 g Oxygen = 85.18 g

Next, divide the mass of Carbon by the total mass and multiply by 100 to get the percent of the total mass that is Carbon:

(2.59 g Carbon / 85.18 g) * 100 = 3.03% Carbon

So, the percent composition of Carbon in the substance is 3.03%.

The first two chemical equations are reversible while the other two are irreversible.

Chemical equation is a symbolic representation of a chemical reaction which is written in the form of symbols and chemical formulas.The reactants are present on the left hand side while the products are present on the right hand side.

A plus sign is present between reactants and products if they are more than one in any case and an arrow is present pointing towards the product side which indicates the direction of the reaction .There are coefficients present next to the chemical symbols and formulas .

The first chemical equation was put forth by Jean Beguin in 1615.By making use of chemical equations the direction of reaction ,state of reactants and products can be stated. In the chemical equations even the temperature to be maintained and catalyst can be mentioned.

Learn more about chemical equations,here:

https://brainly.com/question/19626681

#SPJ1

The Calvin cycle is the regeneration of RuBP.

For the technology of one carbon dioxide molecule from the pathway, six carbon molecules are required, so six turns of the cycle are required for the regeneration of 1 molecule of RuBP one ATP is required and for the technology of six molecules of RuBP, six ATP molecules are required. A G3P molecule carries three constant carbon atoms so it takes two G3Ps to construct a six-carbon glucose molecule.  

Due to the fact the carbohydrate molecule has six carbon atoms, it takes six turns of the Calvin cycle to make one carbohydrate molecule. Six turns of the Calvin cycle are required to generate one mole of glucose. A molecule of glucose is made up of six carbon molecules. consequently, six turns will be required for the synthesis of 1 molecule of glucose by way of the Calvin cycle.

Learn more about The Calvin cycle here:-https://brainly.com/question/920840

#SPJ4

The vapor pressure of a solution prepared by mixing 25 grams of methanol and 75 grams of ethanol at 20 degrees Celsius can be calculated using Raoult's law, which states that the vapor pressure of a component in a solution is directly proportional to its mole fraction.

To calculate the vapor pressure of the solution, we need to use Raoult's law, which is expressed as:

\(P_{total}\)= \(P_A\) ×   \(x_A\) +\(P_B\) ×   \(x_B\)

Where \(P_{total}\) is the vapor pressure of the solution, \(P_A\) and \(P_B\) are the vapor pressures of the individual components (methanol and ethanol in this case), and  \(x_A\) and  \(x_B\) are their respective mole fractions.

First, we need to calculate the mole fractions of methanol ( \(x_A\) ) and ethanol ( \(x_B\)) in the solution. To do this, we need to convert the masses of methanol and ethanol into moles using their molar masses. The molar mass of methanol \((CH_3OH)\) is 32.04 g/mol, and the molar mass of ethanol \((C_2H_5OH)\) is 46.07 g/mol.

Moles of methanol = 25 g / 32.04 g/mol

Moles of ethanol = 75 g / 46.07 g/mol

Next, we calculate the mole fractions:

\(x_A\) = Moles of methanol / (Moles of methanol + Moles of ethanol)

\(x_B\) = Moles of ethanol / (Moles of methanol + Moles of ethanol)

Now that we have the mole fractions, we can substitute them into Raoult's law to calculate the vapor pressure of the solution:

\(P_{total}\) = 92 torr × \(x_A\) + 45 torr ×  \(x_B\)

Substituting the calculated values of \(x_A\) and \(x_B\) will give us the vapor pressure of the solution at 20 degrees Celsius.

To learn more about Raoult's law refer:

https://brainly.com/question/31597777

#SPJ11

Paracelsus, a sixteenth-century alchemist, and healer, adopted the slogan "the patients are your textbook, the sickbed is your study." This view is not consistent with using the scientific method.

The scientific method relies on systematic observation, experimentation, and hypothesis testing to gather evidence and draw conclusions.

Paracelsus' approach, on the other hand, seems to prioritize learning from individual patients and their experiences rather than following a systematic and evidence-based approach.

While his approach may have had value in certain contexts, it does not align with the principles of the scientific method.

So,  this view is not consistent with using the scientific method.

Read more about Systematic observations.

https://brainly.com/question/14070509

#SPJ11

More stability is demonstrated by [Fe(C). 2 \s​ \s O \s4 \s​ \s ] \s3− In comparison to non-chelates, metal chelates are more stable. Oxalate produces metal chelates.

stability and is a bidentate ligand. Because of this, [Fe(C 2 O 4 ] 3 is more stable.the four Spartan files is most likely to be the best approximation of the actual complex, SEFeox3LS, SEFeox3HS, B3LYPFeox3LS, or B3LYPFeox3HS. Open that file the one deemed to be the most stable spin case of Fe ( ox ) 3 − 3 in the previous . Go to the Setup window and choose Calculations. Click the boxes next to Infrared Spectra and Vibrational Modes. The calculation time will depend on the processor in the computer, but may need to run overnight [Co(en)3] [Co(NH3)6] is less stable than 3+. As [Co(en)3], 3+ Due to the presence of the bidentate ligand, ethylene diamine, 3+ is a metal chelate. Comparatively speaking, monodentate lignad-only complexes are less stable than metal chelates.

learn more about stability  here:

https://brainly.com/question/29661360

#SPJ4

Answer:

13.75

Explanation:

Density is equal to mass divided by volume. 110/8 = 13.75

C. keep the ventilation fan running to maintain fresh air.

When implementing an atomic operation using a lockfile, it is important to test separately for the presence of the lockfile and to not always attempt to create it. This can help improve program performance and prevent unnecessary file creation.

The reason for this is that attempting to create a lockfile every time a process needs to access a resource can lead to unnecessary overhead and can slow down the program. If the lockfile already exists, then the process should simply wait until it is released before attempting to access the resource. By testing separately for the presence of the lockfile, the program can avoid unnecessary file creation and improve performance.

Additionally, it is important to ensure that the lockfile is properly released when the process is done using the resource. Failure to release the lockfile can lead to deadlock or other concurrency issues. Therefore, it is important to include proper error handling and cleanup code in the program to ensure that the lockfile is always released correctly.

In summary, when implementing an atomic operation using a lockfile, it is important to test separately for the presence of the lockfile and to not always attempt to create it. This can help improve program performance and prevent unnecessary file creation.

To know more about atomic operations, refer

https://brainly.com/question/30881937

#SPJ11

If a resting axon increases its permeability to sodium ions, it will undergo depolarization.

The resting membrane potential of a neuron is maintained by the unequal distribution of ions across the cell membrane. At rest, the axon has a negative charge inside compared to the outside, primarily due to the higher concentration of sodium ions outside the cell and higher concentration of potassium ions inside the cell.

When the permeability of the axon membrane to sodium ions increases, more sodium ions can flow into the cell. This influx of positively charged sodium ions depolarizes the cell membrane, reducing the electrical potential difference across the membrane. As a result, the inside of the axon becomes less negative.

This increase in sodium permeability can be due to various factors such as the opening of voltage-gated sodium channels or the binding of specific molecules that increase sodium permeability. Depolarization plays a crucial role in initiating and propagating action potentials along the axon, allowing for the transmission of electrical signals in the nervous system.

Know more about Permeability here:

https://brainly.com/question/32006333

#SPJ11

Water exhibits capillary action due to its strong adhesive and cohesive forces.

Capillary action is the ability of a liquid to flow in narrow spaces without the assistance of, or in opposition to, external forces like gravity.Adhesion is the attraction between molecules of different substances, and cohesion is the attraction between molecules of the same substance.

Water molecules have a high degree of cohesion due to their ability to form hydrogen bonds with each other. This creates a strong attraction between the water molecules, allowing them to stick together.In addition, water molecules also exhibit a strong adhesive force due to their ability to form hydrogen bonds with other polar substances.

This allows water to climb up narrow tubes or passageways, as the cohesive forces between the water molecules help to pull the water up, while the adhesive forces allow it to stick to the walls of the tube or passageway. The combined effect of these cohesive and adhesive forces allows water to exhibit capillary action.

To learn more about water  refer to:

brainly.com/question/1216922

#SPJ4

Answer:

8 valence electrons

Explanation:

Neon is a noble gas, and all noble gases have 8 valence electrons. The same goes for its group; all elements in the last group of the periodic table have a full valence shell--8 electrons.

The mechanism of deprotonation can be seen by resonance in the enolate ion.

Understanding the location of electrons and being able to draw the curved arrows that depict the mechanisms by which the reactions occur is one of the most critical tools for learning organic chemistry since they allow us to understand what controls reactions, and how reactions proceed.

     Before we do this, we need to understand that a bond is due to a pair of electrons shared between atoms. When asked to draw a mechanism, curved arrows should be used to show all the bonding changes that occur.

    When the charge shifts from the alpha carbon to the second, it becomes positively charged and the other carbon where the atom has shifted to, it becomes negatively charged.

Learn more about deprotonation at,

https://brainly.com/question/16241904

#SPJ4

After performing the mathematical operation the answer to the appropriate number of 16.222-4.99 is 11.232.

Significant figures are the number of digits that add to the correctness of a value, frequently a measurement. The first non-zero digit is where we start counting significant figures. Determine how many significant digits there are given a range of numbers.

Note that; According to the criteria for significant figure addition, the outcome will have decimal places equal to the lowest of the given values.

We were given the expression  16.222-4.99so that we can perform the sunbstraction and gives the result ot the appropriate signifuicant figure which can be done as :

( 16.222-4.99) = 11.232

Learn more about signifuicant figure  at:

https://brainly.com/question/24491627

#SPJ1

Answer:

C

Explanation:

The products have less potential energy than the reactants in an exothermic reaction.

The statement true about endothermic and exothermic reactions is the products have less potential energy than the reactants in an exothermic reaction.

Endothermic reactions absorb heat from the surrounding and cools the environment, but exothermic reactions release heat and make the environment warm.

Combustion is an exothermic reaction, and melting of ice is an example of an endothermic reaction.

Thus, the correct option is C.

Learn more about exothermic reaction

https://brainly.com/question/10373907

#SPJ2

H3PO4 + Ba(OH)2 --> Ba3(PO4)2 + H2O

so, (A) H2O + Ba3(PO4)2 is your answer.

The final temperature of the gas is approximately 40.96 Kelvin.

To determine the final temperature of the gas, we can use the ideal gas law, which states:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles of the gas, R is the ideal gas constant, and T is the temperature in Kelvin.

First, let's convert the given temperatures to Kelvin. We have:

Initial temperature: -125 degrees Celsius = 148 K (approximate)

Final temperature: Unknown

The initial conditions of the gas are as follows:

Initial pressure (P1) = 1.25 atm

Initial volume (V1) = 1250 mL = 1.25 L (since 1 L = 1000 mL)

Initial temperature (T1) = 148 K

The final conditions of the gas are as follows:

Final pressure (P2) = 50.0 atm

Final volume (V2) = 325 mL = 0.325 L

Final temperature (T2) = Unknown

Using the ideal gas law, we can set up the following equation:

(P1 * V1) / T1 = (P2 * V2) / T2

Substituting the known values:

(1.25 atm * 1.25 L) / 148 K = (50.0 atm * 0.325 L) / T2

Simplifying the equation:

T2 = (50.0 atm * 0.325 L * 148 K) / (1.25 atm * 1.25 L)

T2 = 40.96 K

For more such questions on temperature visit;'

https://brainly.com/question/4735135

#SPJ8