A 1/4 inch 16 UNC bolt is tumed by a 8-inch wrench a robotic arm.
2 questions
A. What is the pitch of the bolt?
B. What is the IMA of the bolt being turned by the wrench?
need by end of day
Answers
Answer:
A. The pitch of the bolt is 0.0625 inch
B. The IMA of the screw is approximately 12.57
Explanation:
A. The given information from the specification of the bolt are;
The major diameter, D, of the bolt = 1/4 inch
The number of threads per inch = 16 threads
The pitch of a bolt is he distance between each successive thread which is found by dividing a unit length by the number of threads of bolt in the unit length
Therefore;
The pitch of the bolt = 1 inch/(The number of threads per inch) = 1 inch/(16 threads per inch) = 0.0625 inch
The pitch, P, of the bolt = 0.0625 inch
B. The Ideal Mechanical Advantage (IMA) of the screw is given as follows;
IMA = The circumference of the screw/(The pitch of the screw)
IMA = π × D/P = π × 1/4 inch/(0.0625 inch) ≈ 12.57
The IMA ≈ 12.57
Related Questions
Hello please help the Slice are in order
Slide 2: Think about when I squirted water out of the syringe and how the change in area affected the speed of the water.
● When you fill up a bottle at the sink, what happens to the speed of the water rising as the water approaches the narrow neck? __________________
● If the wind has to suddenly go through a small area, the wind’s speed _________________
Slide 3:
● Remind me, objects move from areas of __________ pressure to areas of _____________ pressure.
● If I blow directly onto something, it moves farther away because my wind is _____________________.
● If I blow along the surface of an object, which way does the object move? _______________________
● Moving fluids create a stream of _________________ pressure. The faster the fluids flow, the ________________ the pressure becomes.
Slide 4: This is called the Bernoulli Principle.
● In the box to the right, draw a picture of a single raindrop.
Slide 5:
● Wings are ------- on the top and ----------- on the bottom.
● The __________ of the wing is a longer distance than the ________________.
● It takes the air the same amount of time to get around the wing whether it goes over or under it. Therefore, air going _____________ the wing is moving faster than air going ____________ the wing.
● The ________________ an airplane is moving, the more force there is pulling the wings up.
Answers
Sure, I'd be happy to help! Here are the answers to the questions on each slide:
Slide 2:
As the water approaches the narrow neck of a bottle, the speed of the water rising decreases.
If the wind has to suddenly go through a small area, the wind’s speed increases.
Slide 3:
Objects move from areas of high pressure to areas of low pressure.
If you blow directly onto something, it moves farther away because your wind is high-pressure.
If you blow along the surface of an object, the object moves in the same direction as the wind.
Moving fluids create a stream of low pressure.
The faster the fluids flow, the lower the pressure becomes.
Slide 4:
Please draw a raindrop in the box provided.
Slide 5:
Wings are curved on the top and flat on the bottom.
The distance the air has to travel over the top of the wing is a longer distance than the distance it has to travel underneath the wing.
It takes the air the same amount of time to get around the wing whether it goes over or under it.
Therefore, air going over the wing is moving faster than air going under the wing.
The faster an airplane is moving, the more force there is pulling the wings up.
For similar questions on slide
https://brainly.com/question/30269198
#SPJ11
It is illegal to pass another vehicle:
- at an intersection
- on a multi lane street
- over a broken lane marker
- on a one way street
Answers
Lithium-ion batteries are considered dry-cell batteries.
A) TrueB) False
Answers
Answer:
True
Explanation:
In your memo to your boss, explain your position and recommendation regarding your firm's future in designing high-end alternative housing solutions and the types of materials that would be used if this initiative were to move forward. Use the following as a guide for your response:
what cutting-edge alternative housing is desired and could be supported by your firm
how your firm could start creating designs and the types of recycled and reused materials needed in these builds
the challenges and/or benefits
your recommendation regarding how to move forward
Submit your work.
Answers
Answer:
Dear [Boss],
I am writing to recommend that our firm pursue a future in designing high-end alternative housing solutions. There is a growing demand for cutting-edge, sustainable housing options, and I believe our firm is well-positioned to meet this demand.
One area of opportunity is the use of recycled and reused materials in these builds. By incorporating materials such as reclaimed wood, recycled steel, and repurposed bricks, we can not only reduce our environmental impact, but also differentiate ourselves from other housing developers.
There are, of course, challenges to using these types of materials. They may require more time and effort to source, and there may be additional costs associated with their use. However, I believe the benefits of using recycled and reused materials far outweigh these challenges. Not only do they reduce waste and decrease our carbon footprint, they also have the potential to add unique character and value to our projects.
In terms of how to move forward, I recommend that we begin by researching and identifying specific recycled and reused materials that align with our design aesthetic and can be incorporated into our projects. We can also consider partnering with organizations or suppliers that specialize in these types of materials.
Overall, I believe that designing high-end alternative housing solutions using recycled and reused materials is a viable and exciting opportunity for our firm. By embracing this trend, we can not only meet the needs of an increasingly environmentally-conscious market, but also differentiate ourselves in a crowded industry.
Sincerely,
[Your Name]
Explanation:
the role of civil and structural engineer is to produce buildings for
A. domestic use only
B. the banking sectors
C. industrial use
D. public use
Answers
Who’s duty is it to design an efficient and functional foundation
Answers
Answer:
The duty to design an efficient and functional building foundation typically falls under the responsibility of a civil engineer
Civil engineers are responsible for designing and constructing the foundation of a building. They have the expertise and knowledge to analyze the soil conditions, the load-bearing capacity required, and the type of foundation that is most appropriate for the specific structure. They are trained to design foundations that will ensure the stability and safety of the building for its intended use.
While architects play an important role in designing the overall aesthetics and functionality of a building, they are not typically trained in the technical aspects of foundation design. Contractors and masons, on the other hand, are responsible for executing the construction process, but they are not necessarily equipped to design the foundation.
Therefore, it is the duty of a civil engineer to design an efficient and functional building foundation to ensure the long-term stability and safety of the structure.
50 points what shape is mars
Answers
Answer:
its a sphere or a circle, whichever you prefer.
Explanation:
The average temperature on Mars is minus 80 degrees Fahrenheit that's way below freezing! But for some reason, a lot of people think its hot because of its appearance.Its surface is rocky, with canyons, volcanoes, dry lake beds and craters all over it. Red dust covers most of its surface. Which gives it a hot desert look, which may be why people think its hot. Mars has clouds and wind just like Earth.
what is traffic flow in a floor plan?
Answers
Answer:
Traffic flow is how people would travel from one room to another
Explanation:
____________________________________________ help scientists understand processes in the natural world by providing simpler representations of those processes.
Answers
Answer: Models
Explanation:
A water turbine is to be designed to produce 27MW when running at 93.7 rev/min
under a head of 16.5m. A model turbine with an output of 37.5kW is tested under
dynamically similar conditions with a head of 4.9m . Calculate the:
a. model speed; b. scale ratio; c. assuming a model efficiency of 88%, estimate the volume
flow rate through the model; and d. if it is estimated that the force on the thrust bearing of
the full-size machine is 7.0GN , determine the bearing thrust of the model.
Answers
The Answers for the given question are as follow:
a. The model speed is approximately 31.62 rev/min.
b. The scale ratio is approximately 0.0417.
c. The estimated volume flow rate through the model is approximately 943.44 m^3/s.
d. The bearing thrust of the model is approximately 9.72 kN.
To calculate the required values for the water turbine model, we can utilize the concept of dynamic similarity.
a. To find the model speed, we can use the principle of geometric similarity, which states that the ratio of speeds is equal to the ratio of the square roots of the head. Thus:
Model speed = (√(Model head))/(√(Full-size head)) * Full-size speed
= (√4.9/√16.5) * 93.7 rev/min
= 31.62 rev/min
b. The scale ratio can be determined using the equation:
Scale ratio = (√(Model power))/(√(Full-size power))
= (√37.5kW)/(√27MW)
≈ 0.0417
c. To estimate the volume flow rate through the model, we can use the power equation:
Model power = (Model efficiency) * (Volume flow rate) * (Model head) * (Gravity)
37.5kW = 0.88 * (Volume flow rate) * 4.9m * (9.81m/s^2)
Solving for the volume flow rate:
Volume flow rate = 37.5kW / (0.88 * 4.9m * 9.81m/s^2)
≈ 943.44 m^3/s
d. To calculate the bearing thrust of the model, we can use the principle of force similarity:
Bearing thrust model = (Model power / Full-size power) * Full-size bearing thrust
= (37.5kW / 27MW) * 7.0GN
≈ 9.72kN
For more questions on force, click on:
https://brainly.com/question/12785175
#SPJ8
Which type of timing system(s) do you most commonly encounter in passenger cars?
Answers
Answer:
The Ins and Outs of Variable Valve Timing (VVT) Systems and Their Role in Vehicle Emissions. By the early 1990s, almost all import automotive manufacturers had a successful variable valve timing (VVT) system in production.
Explanation:
define horizontal shapes
Answers
Horizontal shapes are simply defined as shapes that identified by their alignment and orientation along the horizontal axis.
What are horizontal shapes?Horizontal shapes are simply identified by their alignment and orientation along the horizontal axis.
These shapes appear to be extended in a left-to-right or right-to-left direction, with a greater width-to-height ratio. Rectangles, squares, lines, and strips are typical examples.
While lines are one-dimensional, horizontal objects with an unlimited length, rectangles and squares have four sides and have horizontal top and bottom boundaries. Strips are lengthy, varying-width horizontal shapes that are frequently utilized in design and the arts.
Horizontal shapes can imply security, harmony, calmness, and a sense of rootedness.
Learn more about shapes at: https://brainly.com/question/25965491
#SPJ1
Need help, I will give a cookie to correct answer.
-( branliest)-
Answers
You are driving on a two-way street, and are looking for a place to park;
Answers
Answer:
you cannot park
Explanation:
except you park in a compound because it is a two way road parking on either side could lead to accident or goslow
Assign each employee to one task
Answers
Based on the created duty assignment table, it can be seen that Lei works on Task 2 M 6p-10p
Duty Assignment TableLei Ava Dan Zoe
Task 1 Tu 12a-4a
Task 2 M 6p-10p
Task 3 Th 4a-6.30a
Task 4 Th 8p-11p
Based on the given task overview, it can be seen that there are four tasks that can be used and divided between Lei, Ava, Da and Zoe
When the schedule is taken under consideration, it can be seen that their names and their assigned duty days and shift are given as Lei has Mondays, Tuesdays, Wednesdays, Thursdays and Friday with a shift of 4pm till 11:30 pm
Read more about job assignment in programming here:
https://brainly.com/question/20912885
#SPJ1
How many meters are there in one centimeter?
Answers
There are 0.01 or 1/100 meters in a centimeter.
Happy to help!
Hope this helps :)
Electrical Engineering dates back to which century?
Answers
2. Identify the structural members specified in the drawings below.
A
В.
С.
Subfloor
D.
E.
F.
Answers
Answer:
where is the drawing bro
Operating defensively is important to avoid a boating accident.
Which of the following is NOT part of defensive operation?
Answers
The operations that are not a part of defensive operation are Excessive speed, Failure to maintain a proper lookout, Impaired boating, Distracted boating.
Operating defensively is important to avoid a boating accident. Being a responsible boat operator means being aware of your surroundings, acting proactively, and taking appropriate measures to avoid putting yourself and others in danger.
The following are some things you should not do when operating a boat defensively:
Excessive speed - It's important to keep your speed under control, especially when operating in crowded waters or areas with poor visibility. Even if you are operating at a safe speed, other boaters may not be, so it's important to keep a lookout for other boats and respond quickly if necessary.
Failure to maintain a proper lookout - This is one of the most common causes of boating accidents. Boaters should always keep a lookout for other boats, buoys, floating debris, and other hazards that could pose a danger. In addition to keeping a lookout, boaters should also be aware of the water depth and conditions and adjust their speed and course accordingly.
Impaired boating - Operating a boat while under the influence of drugs or alcohol is extremely dangerous and can result in serious injury or death. It's important to always stay sober while operating a boat, as well as to encourage others to do the same. If you plan to consume alcohol while on the water, make sure you have a designated driver or arrange for alternative transportation.
Distracted boating - Just like driving a car, operating a boat requires your full attention. Avoid using your phone, eating, or engaging in other activities that could take your attention away from the water. In addition, make sure that your passengers are seated safely and not causing any distractions.
For more such questions on defensive operation, click on:
https://brainly.com/question/32127439
#SPJ8
How much paint would you need to cover one bedroom wall using 2 coats of paint?
•Wall: 18 feet x 15 feet
•Research how much paint one gallon will cover
•Show your calculations
•Answer must be in gallons
Answers
Answer:
One gallon of paint can cover about 400 square feet of wall.
18 x 15 feet is 270 feet of space.
270/400 = .675 gallons for one coat on one wall
.675 x 4 = 2.7 gallons for one coat on all walls
2.7 gallons x 2 = 5.4 gallons of paint in all
I need help asapppp!!!!!
Answers
You are tasked with a designing a circuit that accepts a stream of binary digits, and that outputs a 0 whenever the pattern 10 takes place. Otherwise, the output is 1.
Part A [2 marks] Draw the state diagram for the above description. Use a Moore model, i.e., a Finite State Machine (FSM) where the outputs are specified within the states.
Part B [2 marks] Assign binary values to your states using an encoding that requires the minimum number of digits.
Part C [2 marks] Obtain the binary-coded state table.
Part D [4 marks] Assuming the use of JK flip-flops, derive both the flip-flop input equations in addition to the output equation.
Part E [4 marks] In the space below, draw the logic diagram of the circuit you designed above.
Answers
To draw the state diagram for the given description, we need to identify the states and transitions based on the behavior of the circuit. In this case, we have two states: State A (output = 1) and State B (output = 0).
The transitions are as follows:
From State A, when the input is '1', transition to State B.From State B, when the input is '0', transition to State A.Part B:
To assign binary values to the states, we can use a binary encoding that requires the minimum number of digits. Since we have two states, we can assign '0' to State A and '1' to State B.
Part C:
Based on the states and transitions, we can create a binary-coded state table. Here's an example of how the table would look:
| Present State | Input | Next State | Output |
|---------------|-------|------------|--------|
| A | 0 | A | 1 |
| A | 1 | B | 1 |
| B | 0 | A | 1 |
| B | 1 | B | 0 |
Part D:
Assuming the use of JK flip-flops, we can derive the flip-flop input equations and the output equation based on the state table. Here's an example of the equations:
J_A = 0
K_A = 0
J_B = 1
K_B = Q_A
Output = Q_A
Part E:
To draw the logic diagram of the circuit, we would use the derived flip-flop input equations along with the output equation to implement the circuit using logic gates.
Thus, the circuit would include JK flip-flops, AND gates, and possibly other gates depending on the specific implementation.
For more details regarding state diagrams, visit:
https://brainly.com/question/13263832
#SPJ1
Who is authorized to perform an Annual Inspection?
Answers
Answer:
The holder of an IA
Explanation:
Clear and steady instructions are not necessary when directing your aready know what to do.Clear and steady instructions are not necessary when directing your models as most of them are professionals and already know what to do. True or false
Answers
Answer:
Explanation:
false
Clear and steady instructions are not necessary when directing your already know what to do.Clear and steady instructions are not necessary when directing your models as most of them are professionals and already know what to do. True or false
giving free brainlist first 1
Answers
Hi! Hope you're having a great day!
Can I have brainlist?? :D
What advice would you give to the company that wants to build a skyscraper in California? Make sure to include whether there is anything the company should change about its design and materials. Give specific examples. Your answer should include at least five complete sentences.
Answers
In order to begin building construction, it is essential to adhere to all California's edicts and regulations, as this state requires strict compliance with seismic laws and environmental concerns for constructing high-rises.
What will be the advice?It is imperative that you acquire the valid documentation and permissions given by pertinent authorities.
Moreover, it is sensible to reflect upon the regional meteorological patterns and geological conditions. Since California is renowned for robust earthquakes and devastating fires, the edifice must be engineered to endure these potential disasters. .
Learn more about company on
https://brainly.com/question/24553900
#SPJ1
what should you consider when choosing the type of head protection you wear
Answers
When selecting head protection for your job, you should take into account a number of variables, including protection purpose, material, class or grade, and flammability.
What factors must you take into account when choosing when to wear PPE?When caring for someone who has a confirmed OR suspected case of COVID-19, or when they are in quarantine, PPE should be used. Before entering the room or the person's house, put on the PPE. but is vulnerable to infection due to recent moves or exposure. when a person's COVID-19 status is known or suspected.
Why is wearing head protection important?If there is a chance that you could hit your head on a fixed object or be injured by falling debris, head protection is intended to keep you safe (e.g. where there is restricted headroom).
to know more about head protection here:
brainly.com/question/11272362
#SPJ1
Which of the following describes what industrial engineers do?
they design chips and circuit boards
they design and construct large structures
they develop new medical devices
they create and interpret design specs
Answers
Answer:
B
Explanation:
What is a triangle and the examples
Answers
Answer:
A triangle is a closed, 2-dimensional shape with 3 sides, 3 angles, and 3 vertices. A triangle is also a polygon. The above figure is a triangle denoted as △ABC. Some real-life examples of triangles include sandwiches, traffic signs, cloth hangers, and a rack in billiards.
4) What term describes the movement of electrons from one atom to another? A) Chain reaction B) Energy transfer C) Electricity D) None of these
Answers
Answer:
C) Electricity
Explanation:
The movement of electrons from one atom to another refers to electricity.