1 of 101 of 10 Items
00:04 / 30:00
Assessment started: Unit 3 Exam-Retest.
Item 1
If pressure is constant, how is the volume of a gas related to its temperature?

A business can incorporate all of these options to align with green design principles.

Employees can produce fuel, heat, or power from renewable sources for use inside their workplace. Wind, biomass, geothermal, solar, ocean, hydropower, landfill gas, and municipal solid waste are a few examples of these sources.

The practise of taking into account and limiting environmental effect while producing goods is known as sustainable design or green design. Green design principles provide businesses a variety of opportunities to cut waste, repurpose resources, and recycle goods and materials.

To know more about principles visit:-

https://brainly.com/question/30401997

#SPJ1

Answer:

at their own state.

That leaves only five elements: carbon, phosphorus, sulfur, selenium, and iodine, which are all non-metals and are solid at room temperature.

Answer:1. Introduction

The main air pollutants are represented by gases forms, particles in suspension, different ionizing radiation and noise.

The gases forms are: oxidized and reduced forms of carbon (CO2, CO, CH4), of nitrogen (NO2, NO, N2O4, NH3, NH4+), SO2, O3, C6H6 vapours, Hg, volatile phenols, Cl2, etc.

The particulate forms are: PM10 and PM2.5 particulate matter, heavy metals with toxic effect (Pb, Ni, Cd, As), polycyclic aromatic hydrocarbons PAHs, etc.

Atmospheric pollutants have a negative effect on the plants; they can have direct toxic effects, or indirectly by changing soil pH followed by solubilization of toxic salts of metals like aluminum. The particulate matters have a negative mechanical effect. They cover the leaf blade reducing light penetration and blocking the opening of stomata. These impediments influence strongly the process of photosynthesis which rate declines sharply.

Explanation:

Answer:

A More air pollution because there are fewer trees to take in carbon dioxide

C Fewer birds and other wildlife because they have fewer places to live

Explanation:

I took the test on A P E X

The atomic ratio of carbon to oxygen in carbon monoxide (CO) is 1:1, and the atomic ratio of carbon to oxygen in carbon dioxide (CO₂) is 2:1.

Firstly, we can analyze the decomposition of carbon monoxide (CO) and carbon dioxide (CO₂) to determine the atomic ratios involved.

Let's denote the atomic ratio of carbon to oxygen in carbon monoxide as x, and the atomic ratio of carbon to oxygen in carbon dioxide as y.

According to the given data;

Decomposition of carbon monoxide (CO);

Oxygen produced = 3.36 g

Carbon produced = 2.52 g

We know that the atomic mass of carbon is 12 g/mol, and the atomic mass of oxygen is 16 g/mol. Using these values, we can calculate the number of moles for each element;

Number of moles of oxygen = mass / atomic mass = 3.36 g / 16 g/mol = 0.21 mol

Number of moles of carbon = mass / atomic mass = 2.52 g / 12 g/mol = 0.21 mol

Since the atomic ratio of carbon to oxygen in carbon monoxide is x, we can write the following equation;

0.21 mol C / (0.21 mol O) = x

Simplifying the equation, we have;

x = 1

Therefore, the atomic ratio of carbon to oxygen in carbon monoxide is 1:1.

Decomposition of carbon dioxide (CO₂);

Oxygen produced = 9.92 g

Carbon produced = 3.72 g

Following the same calculations as before;

Number of moles of oxygen = mass / atomic mass = 9.92 g / 16 g/mol = 0.62 mol

Number of moles of carbon = mass / atomic mass = 3.72 g / 12 g/mol = 0.31 mol

Since the atomic ratio of carbon to oxygen in carbon dioxide is y, we can write the following equation;

0.31 mol C / (0.62 mol O) = y

Simplifying the equation, we have;

y = 0.5

Therefore, the atomic ratio of carbon to oxygen in carbon dioxide is 1:0.5, which can be simplified to 2:1.

To know more about decomposition here

https://brainly.com/question/20418092

#SPJ4

--The given question is incomplete, the complete question is

"Missed this? watch kcv: atomic theory; read section 2.3. you can click on the review link to access the section in your text. carbon and oxygen form both carbon monoxide and carbon dioxide. when samples of these are decomposed, the carbon monoxide produces 3.36 g of oxygen and 2.52 g of carbon, while the carbon dioxide produces 9.92 g of oxygen and 3.72 g of carbon. Calculate the atomic ratio of carbon to oxygen in carbon monoxide, and carbon dioxide."--

Answer:

Our Sun. Corona – The outer layer of sun's atmosphere. Sunspot – A dark area of gas on the sun's surface that is cooler than surrounding gases. Prominence – A huge, reddish loop of gas that protrudes from the sun's surface, linking part of sunspot regions.

To prove that the symmetric group S4 has no cyclic subgroup of order 6, and that it has a non-cyclic subgroup of order 6, we can use the properties and structure of S4.

(i) To show that S4 has no cyclic subgroup of order 6:

In S4, the order of an element is equal to the number of elements in its cyclic subgroup. The order of a cyclic subgroup is determined by the order of its generating element.

For S4, the highest order of an element is 4, which means there are no elements of order 6. Therefore, S4 has no cyclic subgroup of order 6.

(ii) To show that S4 has a non-cyclic subgroup of order 6:

In S4, there exist subgroups of order 6 that are not cyclic. One such example is the subgroup generated by two disjoint transpositions. Let's consider the subgroup generated by the elements (12) and (34), which are disjoint transpositions.

The subgroup generated by (12) and (34) is given by:

{(12), (34), (12)(34), e}.

This subgroup has four elements and is not cyclic. It is isomorphic to the symmetric group S2, which is not cyclic.

Therefore, we have shown that S4 has a non-cyclic subgroup of order 6.

In summary:

(i) S4 has no cyclic subgroup of order 6.

(ii) S4 has a non-cyclic subgroup of order 6, such as the subgroup generated by (12) and (34).

To know more about subgroup visit;

brainly.com/question/31432778

#SPJ11

Answer:

It's explained by nebular theory, which describes the forces and processes at play as a nebula spins and accretes into a star and its planets orbiting it. A key piece of information to always keep in mind is that the force of gravity is responsible for accretion and all the objects it forms.

Explanation:

I hope this helps my mom helped me with this question too

The physiological mechanism that is most important in the respiratory response to a systemic decrease in arterial pH due to elevated Ketoacids is activation of peripheral chemoreceptors.What are chemoreceptors?Chemoreceptors are sensory cells or organs that are sensitive to chemical changes within the body.

They sense the changes in chemical concentration and produce electrical signals that are interpreted by the brain as taste, smell, or a physiological response.A change in arterial pH and/or CO2 levels activate chemoreceptors present in the respiratory system. The peripheral chemoreceptors are found in the aortic and carotid bodies and are responsible for the respiratory response when there is a decrease in arterial pH or an increase in CO2 levels.

A decrease in arterial pH due to elevated ketoacids causes a systemic response. The most important physiological mechanism involved in the respiratory response to the decrease in arterial pH is the activation of peripheral chemoreceptors. These chemoreceptors are found in the aortic and carotid bodies and are responsible for sensing changes in the arterial pH and increasing ventilation in response to it.

Learn more about the mechanism here

https://brainly.com/question/27921705

#SPJ11

CO2 play a role in earlier processes of cellular respiration.ture

Answer: D

Explanation:

chemical formula of methane: CH4

electron configuration of C: 2,4

electron configuration of H: 1

there are 4 hydrogen atoms that donated 1 electron each to C

therefore it's D.

Answer:

Composition of Sodium Oxide - Na 2 O Element - Mass Percent Sodium 45.9795g Sodium 45.9795g Oxygen 15.9994g Oxygen 15.9994g

Answer:

Below

Explanation:

TWO sodium atoms     2 X   22.99 = 45.98

ONE oxygen atom       15.999

total = 61.979

Sodium percent =   45.98 / 61.979 = 74 %

   the remainder is Oxygen   26%

The molar masses of Mg and Fe are:

Magnesium oxide:

Mass of oxygen = 1

Mass of magnesium = 1.5

Molar mass of magnesium = (1.5 / 1) × 16 = 24

Iron oxide:

Mass of oxygen = 1

Mass of iron = 3.5

Molar mass of iron = (3.5 / 1) × 16 = 52

The accepted molar masses of Mg and Fe are 24.305 g/mol and 55.845 g/mol, respectively. The values I obtained are slightly different from the accepted values, but the difference is within experimental error.

There are a few possible reasons for the differences between the values obtained and the accepted values. One possibility is that the compounds used were not pure. Another possibility is that an error was made in calculations. Finally, it is also possible that the accepted values are not accurate.

To account for the differences, repeat the experiment with more accurate measurements and a purer sample of the compounds. Also check the accepted values to make sure they are accurate.

Find out more on simplest compound here: https://brainly.com/question/17510000

#SPJ1

Answer:

double

Explanation:

.

Sodium hydroxide, also known as lye and caustic soda, is an inorganic compound with the formula NaOH. It is a white solid ionic compound consisting of sodium cations Na + and hydroxide anions OH −

Answer:

4 significant figures

Explanation:

505 has 3 significant figures

450.25 has 5 significant figures

First do simple subtraction

505 - 450.25 =54.75

And then evaluate any number that has significance or is important if the decimal were to be moved.

4 significant figures

Answer:

1st question: The moon is closer to Earth so it is easier to see and visit.

2nd question: The moon has a week/month cycle instead of a day/night cycle.

3rd question: The corona

Explanation:

Invented by Bernard Launy and Jeremie Metz, flaws in the system in terms of energy inputs and outputs is the overbalanced wheel in which spokes are attached

Energy is the ability to do work to cause changes in matter

The overbalanced wheel perpetual motion machine is one of the most commonly proposed perpetual motion machine designed and wheel is designed to turn clockwise just after the weighted spoke reaches the top of the wheel and the spoke flip outward to the right exerting the force downward toward the ground and some energy will be lost from friction as the mechanism rub on the inner spoke and more energy will be lost when it transferred into sound and thermal energy

Know more about inputs and outputs

https://brainly.com/question/1101740

#SPJ1

Answer:

True. The limiting reagent is the reactant that is completely consumed in a chemical reaction and limits the amount of product that can be formed. The theoretical yield is the maximum amount of product that can be obtained from the limiting reagent, assuming that the reaction goes to completion and no side reactions occur. However, in practice, it is common for side reactions to occur, which can reduce the actual yield of the product. Therefore, while the limiting reagent does control the theoretical yield of a reaction, the actual yield may vary due to the presence of side reactions or other factors that can affect the efficiency of the reaction.

Explanation:

Answer:

Its the second one.

Explanation:

Which among the following will make lime water look milky

option C) Ca(OH)₂

Explanation:

An element just has one-type atoms/atom (e.g. O2). Meanwhile, a compound is a variety of atoms (e.g. H2O).

A reaction to be spontaneous,overall cell potential must be positive.

(A)The metabolite which would spontaneously reduce oxaloacetate (OAA) is:

alpha-ketoglutarate

(B)The two half cell reactions are as follows:

Reduction half reaction:

Oxaloacetate + 2 H+ + 2 e- --> malate

Oxidation half reaction:

alpha-ketoglutarate --> Succinate + CO2 + 2 H+ + 2 e-

Overall resulting balanced reaction for the reduction of OAA :

Oxaloacetate +alpha-ketoglutarate --> malate + Succinate + CO2

(C)the standard reduction potential for the reaction chosen in (B):

+0.67-0.17 = +0.50 V

To know more about spontaneous refer here:

https://brainly.com/question/5372689#

#SPJ11

Answer:

20.11 g.

Explanation:

What is given?

c (specific heat of iron) = 0.450 J/g °C.

Q (heat energy) = 179.85 J.

ΔT (change of temperature) = |31.42 °C - 51.29 °C| = 19.87 °C.

What do we need? Mass of iron (m)

Step-by-step solution:

Let's see the formula of specific heat:

Where c is specific heat, Q is heat energy, m is mass and ΔT is the change of temperature.

We just have to solve for 'm' to find the mass of iron and replace the given data that we have, like this:

The mass of the iron would be 20.11 g.

The particle that makes the atom an unstable isotope is the neutron. When there is an excess or a deficiency of neutrons in an atom's nucleus, it becomes an unstable isotope.

Unstable isotopes are isotopes that decay and emit radiation until they reach a stable state. They are also known as radioactive isotopes. The radioactive isotopes are unstable and have an unpredictable lifespan because they have an unstable ratio of neutrons to protons. This excess of neutrons in the nucleus results in a greater electrostatic repulsion between protons, causing instability and eventually decay.Neutrons are the particles that are responsible for making atoms unstable isotopes. The excess or deficiency of neutrons in an atom's nucleus leads to an unstable state and eventually decay. Radioactive isotopes are important for various practical applications such as nuclear power, radiography, and cancer treatment.

Therefore, neutrons makes the atom an unstable isotope. The decay of unstable isotopes can be used for many practical applications such as nuclear power, radiography, and cancer treatment.

To know more about isotope click:

brainly.com/question/27475737

#SPJ11

To write a balanced chemical equation, we need to ensure that the number of atoms of each element is the same on both sides of the equation. This is done by adjusting the coefficients (the numbers in front of each compound or element) until the equation is balanced.

For example, let's balance the equation for the reaction between hydrogen gas (H2) and oxygen gas (O2) to form water (H2O):

H2 + O2 -> H2O

To balance this equation, we need to add a coefficient of 2 in front of H2O:

2H2 + O2 -> 2H2O

Now the equation is balanced, with 2 atoms of hydrogen and 2 atoms of oxygen on both sides.

The stoichiometric coefficients are the numbers in front of each compound or element in the balanced chemical equation. These coefficients tell us the relative number of molecules or moles of each substance involved in the reaction.

The sum of the stoichiometric coefficients is simply the sum of all the coefficients in the balanced chemical equation. For the above example, the sum of the coefficients is:

2 + 1 + 2 + 2 = 7

So the sum of the stoichiometric coefficients for this balanced chemical reaction is 7.
Hello! To help you with your question, let's consider a simple chemical reaction:

Hydrogen gas (H₂) reacts with oxygen gas (O₂) to form water (H₂O).

Now, to balance the chemical equation, we need to ensure that the number of atoms for each element is equal on both sides of the equation. The balanced chemical equation for this reaction is:

2H₂ + O₂ → 2H₂O

In this equation, the stoichiometric coefficients are the numbers in front of the chemical species, which are 2 for H₂, 1 for O₂, and 2 for H₂O. To find the sum of the stoichiometric coefficients, add these coefficients together:

2 (for H₂) + 1 (for O₂) + 2 (for H₂O) = 5

Therefore, the sum of the coefficients for the balanced chemical reaction is 5.

Learn more about chemical equation here;

https://brainly.com/question/30087623

#SPJ11

Water is able to dissolve many compounds is the 2) the fact that water molecules are polar.

When a liquid spreads over the surface flippantly with out the formation of droplets, a floor is wetted. If that liquid is water, the surface is hydrophilic. Water molecules have a polar association of oxygen and hydrogen atoms—one side (hydrogen) has a wonderful electric charge and the alternative side (oxygen) had a terrible rate. This lets in the water molecule to turn out to be drawn to many different unique varieties of molecules. Generally speaking, water is right at dissolving ions and polar molecules, however terrible at dissolving nonpolar molecules.

Thus, option 2 is the correct choice.

To learn more about hydrophilic check the link below:

https://brainly.com/question/18522370

#SPJ4