Drapes and valances are a phenomenal method so as to add type and class to any room. But when they don’t seem to be hung correctly, they will look sloppy and uninviting. That is why it is necessary to comply with these step-by-step directions on dangle drapes and valances. With a bit little bit of effort, you’ll be able to create a classy and polished look that may elevate your private home décor.
Step one is to find out the peak at which you need to dangle your drapes. A superb rule of thumb is to hold them about 4 inches beneath the ceiling line. This can create a extra formal look. If you need a extra informal look, you’ll be able to dangle them nearer to the window body. As soon as you have selected the peak, use a degree to mark the spots the place you will want to put in the brackets.
Subsequent, you will want to put in the brackets. There are two varieties of brackets: inside-mount brackets and outside-mount brackets. Inside-mount brackets are put in contained in the window body, whereas outside-mount brackets are put in on the skin of the window body. The kind of bracket you select will depend upon the type of your drapes and the look you need to obtain. As soon as the brackets are put in, you’ll be able to dangle your drapes. Begin by threading the rod by means of the highest of the drapes. Then, raise the rod and drapes onto the brackets. Modify the peak of the drapes so that they are even, after which safe them in place with the supplied {hardware}.
Making ready the Mounting {Hardware}
Securing your drapes and valance requires acceptable mounting {hardware}. Comply with these steps to arrange:
1. Decide the Sort of {Hardware}
Select {hardware} based mostly on the burden of your drapes and valance. For light-weight materials, customary curtain rods will suffice. Heavy drapes could require heavy-duty rods or traverse rods. Resolve if you happen to favor to mount your {hardware} inside or exterior the window body. Inside mounting presents a clear, recessed look, whereas exterior mounting permits for wider protection.
2. Measure and Mark the Wall
Measure the width of your window and add 6-12 inches on all sides to find out the rod size. Mark the wall on the desired peak and distance from the window body. Use a degree to make sure a straight line.
3. Set up Brackets or Tracks
Relying in your chosen {hardware}, set up brackets or tracks on the marked spots. Use the supplied screws and anchors for a safe maintain. If utilizing a rod, connect the brackets to the ends and modify the rod size accordingly.
4. Select Finials and Rings
If utilizing a curtain rod, choose finials for the ends to reinforce the look. Slide curtain rings onto the rod to accommodate your drapes and valance.
5. Collect Needed Instruments
You may want the next instruments for set up:
| Device |
|---|
| Drill or screwdriver |
| Degree |
| Tape measure |
| Pencil |
| Stud finder (non-obligatory) |
Measuring and Marking the Window Body
1. Decide the Width of Your Curtains
To find out the width of your curtains, measure the width of your window body from the within edge to the within edge. Add 4 to six inches on all sides to permit for fullness. For instance, in case your window body is 36 inches vast, your curtain width ought to be 48 to 54 inches.
2. Mark the Top of Your Curtains
The peak of your curtains will depend upon the type you select. You possibly can go for brief curtains that fall just under the window sill, lengthy curtains that attain the ground, or something in between.
This is a desk to information your curtain size choice:
| Curtain Type | Size Measurement |
|---|---|
| Brief/Café curtains | 12-18 inches beneath the window sill |
| Flooring-length curtains | 1-2 inches above the ground |
| Puddling curtains | 6-12 inches on the ground |
3. Mark the Bracket Placement
Upon getting decided the curtain peak, mark the middle level on the window body. Measure the space from the highest of the curtain to the specified bracket placement. For many curtain kinds, this distance is 4-6 inches. Mark this level on the window body and repeat for the opposite aspect. Guarantee each brackets are parallel and degree for even material.
Putting in the Material Rod
Step 1: Decide the Top and Width
Measure the window body’s peak and width. Then, add 6-12 inches to the peak for the size of the drape, which can lengthen to the ground or simply above it. For the width, add no less than 12 inches to increase the curtain rod past the window body on each side, permitting the drapes to completely cowl the window when drawn.
Step 2: Mark the Wall
Use a degree to attract a horizontal line on the wall on the desired peak for the rod. Mark the positions for the tip brackets by measuring the required extension and including half the bracket width to every mark.
Step 3: Choose and Set up Brackets
Select brackets that complement the rod and window décor. Drill pilot holes on the marked positions and insert supplied screws or anchors (for drywall) to safe the brackets. If utilizing extending brackets, comply with the producer’s directions to regulate the size to the specified extension.
Step 4: Assemble the Rod
Join the curtain rod sections, inserting the assist rods into the outer sections. Tighten the included caps or screws to carry the rod securely.
Step 5: Hold the Rod
Place the rod into the brackets. If the rod is heavy, have a helper maintain the rod whilst you safe it. Tighten the screws or nuts to lock the rod in place.
Step 6: Modify the Top and Degree
If obligatory, utilizing a degree, modify the peak or degree of the rod by loosening the bracket screws and repositioning them. Retighten the screws as soon as the rod is degree and on the desired peak.
Hanging the Drapes
Hanging drapes provides a contact of class and privateness to any room. Whether or not you are a seasoned decorator or a first-timer, following these step-by-step directions will guarantee your drapes dangle superbly.
1. Measure and Mark the Material Rod
Utilizing a measuring tape, decide the specified size of the drapes. Add 6-8 inches to this measurement to permit for overlap and adjustment. Mark the middle and outer fringe of the drape rod.
2. Set up the Material Rod
Use a degree to make sure the rod is straight, then use screws or nails to lock it to the wall. For heavy drapes, use toggle bolts or drywall anchors to supply further assist.
3. Collect the Drapes
In case your drapes have pleats, collect them evenly by hand or utilizing pleat hooks. Should you’re utilizing curtain rings, connect them to the again of the drapes at common intervals.
4. Hold the Drapes on the Rod
a. Utilizing Curtain Rings: Slide the curtain rings onto the material rod and hook the drapes onto the rings. Make sure the drapes dangle evenly and on the desired peak.
b. Utilizing Pleat Hooks: Insert the pleat hooks into the pleats of the drapes and dangle them instantly onto the material rod. Modify the hooks to make sure the drapes collect evenly.
c. Utilizing Cloth Clips: Connect cloth clips to the again of the drapes and hook them onto the material rod. This methodology gives a extra informal and adjustable hanging type.
d. Utilizing a Valance: Should you’re utilizing a valance, slide it onto the material rod over the drapes. Place it on the desired peak and modify it for a clear and polished look.
5. Modify and End
As soon as the drapes are hung, modify the size and fullness as wanted. Use material weights on the backside of the drapes so as to add weight and create a extra formal look.
Trimming the Drapes to Measurement
Upon getting decided the specified size of your drapes, it is time to trim them to measurement. This is a step-by-step information that can assist you obtain a professional-looking end:
- Measure and mark the hem: Use a measuring tape to find out the specified size of the drapes, from the highest of the rod to the specified size on the ground. Mark the hemline with a material pencil or chalk.
- Fold and press the hem: Fold the underside fringe of the drape up by 2-3 inches and press it with an iron to create a crease.
- Sew the hem: Utilizing a stitching machine, sew alongside the crease you created in Step 2. Use a straight sew or ornamental sew, relying in your desired look.
- Repeat for the opposite drape: Comply with Steps 1-3 to trim and hem the opposite drape to the identical size.
- Press the complete drape: As soon as each drapes are hemmed, press them utterly to take away any wrinkles and guarantee a crisp, completed look.
Extra Ideas
- Should you’re not comfy stitching, you’ll be able to have your drapes professionally hemmed at an area seamstress or material store.
- Think about including weight to the underside of your drapes by stitching in lead strips or hem tape. This can assist stop them from billowing within the wind or bunching up on the ground.
- To create a extra formal look, you’ll be able to add a second hem or add ornamental trim to the underside of your drapes.
| Hem Sort | Width | Description |
|---|---|---|
| Customary Hem | 1-2 inches | Easy, single-folded hem |
| Double Hem | 2-4 inches | Extra formal, double-folded hem |
| French Hem | 1-1.5 inches | Invisible, rolled-edge hem |
Putting in the Valance
As soon as the brackets are in place, you’ll be able to set up the valance. Valances are available a wide range of kinds, so the set up course of will fluctuate relying on the kind of valance you have got.
Measure and Mark the Place of the Valance
Earlier than you start, it is advisable measure and mark the place of the valance on the wall. To do that, first decide the peak at which you need to dangle the valance. Upon getting decided the peak, measure the space from the highest of the window body to the specified peak of the valance. Switch this measurement to the wall and mark the place of the valance with a pencil.
Connect the Valance to the Wall
Upon getting marked the place of the valance, you’ll be able to connect it to the wall. There are a number of the way to do that, relying on the kind of valance you have got. Some valances include built-in mounting {hardware}, whereas others require you to buy separate {hardware}. If you’re utilizing separate {hardware}, be sure you select {hardware} that’s acceptable for the burden of the valance and the kind of wall you’re attaching it to.
Middle the Valance
As soon as the valance is connected to the wall, it is advisable heart it over the window. To do that, measure the space from the left fringe of the window body to the fitting fringe of the window body. Divide this measurement in half and mark the middle level of the window. Switch this measurement to the valance and align the middle of the valance with the middle level of the window.
Safe the Valance
As soon as the valance is centered, safe it to the wall. If you’re utilizing mounting {hardware} that got here with the valance, comply with the directions supplied by the producer. If you’re utilizing separate {hardware}, be sure you use screws which might be lengthy sufficient to penetrate the wall and assist the burden of the valance.
Step-by-Step Directions for Putting in a Valance Utilizing L-Brackets
If you’re putting in a valance utilizing L-brackets, comply with these step-by-step directions:
- Measure the width of the window and add 6 inches.
- Minimize two items of 1×2 lumber to the size you measured in step 1.
- Connect an L-bracket to every finish of every piece of lumber, ensuring that the L-brackets are going through in the identical course.
- Middle the 2 items of lumber on the wall above the window, ensuring that the L-brackets are degree.
- Mark the位置of the L-brackets on the wall with a pencil.
- Drill pilot holes into the wall at every of the marks you made in step 5.
- Drive screws into the pilot holes to safe the L-brackets to the wall.
- Hold the valance on the L-brackets.
Adjusting the Material and Valance
As soon as the material and valance are hung, you will want to regulate them to make sure they give the impression of being excellent. Listed here are some suggestions:
1. Examine the Top of the Material
Be certain that the material hangs evenly on each side and that the underside hem is on the desired peak. If the material is just too lengthy, you’ll be able to modify the size by transferring the hooks to the next setting.
2. Middle the Valance
The valance ought to be centered over the window. To do that, measure the width of the window and divide it in half. Mark the middle level and align the valance accordingly.
3. Modify the Gatherings
When you’ve got gathered material, you’ll be able to modify the gathers to create the specified fullness. Use the drawstrings or pleater hooks to tighten or loosen the gathers.
4. Hem the Material
If the material is just too lengthy, you’ll be able to hem it to the specified size. Use a blind hem sew or different invisible sew to create knowledgeable end.
5. Set up Tiebacks or Holdbacks
Tiebacks or holdbacks can be utilized to carry the material open when wanted. Set up the tiebacks or holdbacks on the desired peak and guarantee they’re safe.
6. Add Equipment
Equipment comparable to tassels, fringe, or trim can improve the look of the material and valance. Add these equipment in keeping with your style and decor type.
7. Steam or Iron the Material and Valance
Lastly, steam or iron the material and valance to take away wrinkles and provides them knowledgeable look. Use the suitable warmth setting for the material sort.
| Cloth Sort | Warmth Setting |
|---|---|
| Polyester | Low |
| Cotton | Medium |
| Linen | Excessive |
| Silk | Cool |
Ending Touches and Styling
Layering Curtains
Layer sheer curtains behind heavier drapes to create depth and visible curiosity. Sheer materials permit pure gentle to filter by means of whereas including a contact of class.
Utilizing a Valance
Add a valance to the highest of your drapes to hide the curtain rod and {hardware}. Valances can match or distinction the curtains for a tailor-made look.
Including Trim
Trim the perimeters of your curtains with fringe, tassels, or different elaborations to raise their type. Trim can add an ornamental contact and complement the general design scheme.
Hanging Tiebacks
Set up tiebacks to carry again curtains once they’re not in use. Tiebacks are available varied kinds and supplies, permitting you to personalize the look.
Accessorizing with Finials
Add finials to the ends of your curtain rods to reinforce their aesthetic enchantment. Finials will be ornamental or purposeful, offering a safe maintain for the curtains.
Customizing Material Size
Modify the size of your curtains to realize the specified puddle or break impact. A puddle refers to curtains that relaxation on the ground, whereas a break signifies that they only graze the ground.
Styling with Patterns and Textures
Incorporate patterns and textures into your drapes and valances to create visible intrigue. Combine and match totally different materials and patterns so as to add depth and curiosity.
Desk of Material Remedies
| Material Remedy | Description |
|---|---|
| Sheer Curtains | Light-weight, translucent materials that permit gentle to go by means of |
| Heavy Drapes | Thicker, opaque materials that block out gentle and supply privateness |
| Valance | An ornamental cloth panel that hangs above the curtain rod |
| Trim | Gildings that improve the perimeters of curtains |
| Tiebacks | Units that maintain again curtains when not in use |
| Finials | Ornamental or purposeful finish caps for curtain rods |
Troubleshooting Widespread Material Points
Concern: Drapes are too lengthy or too brief.
Resolution: Remeasure the window and modify the drapes accordingly. Use a material measuring tape and measure from the highest of the curtain rod to the place you need the drapes to fall. Add 2-4 inches to the size for a hem.
Concern: Drapes should not hanging evenly.
Resolution: Examine the curtain rod brackets to make sure they’re securely put in. Measure the space between the brackets and modify the curtain rod as wanted. Rehang the drapes and modify the folds as obligatory.
Concern: Drapes are dragging on the ground.
Resolution: Increase the curtain rod or shorten the drapes. If elevating the rod will not be an choice, contemplate including a hem to the underside of the drapes to stop them from touching the ground.
Concern: Drapes are blocking an excessive amount of gentle.
Resolution: Select a lighter cloth or use sheer curtains to permit extra gentle to go by means of. You may as well layer sheer curtains behind heavier drapes to regulate the quantity of sunshine.
Concern: Drapes are getting soiled simply.
Resolution: Select drapes constituted of stain-resistant or washable cloth. Common cleansing will assist to stop dust and dirt from build up.
Concern: Drapes are light or discolored.
Resolution: Keep away from hanging drapes in direct daylight, as this could trigger fading. Select drapes constituted of fade-resistant cloth or use a curtain liner to guard them from UV rays.
Concern: Valance is just too small or giant.
Resolution: Remeasure the window and modify the valance measurement accordingly. Think about the size and width of the window when selecting a valance. A valance that’s too small or giant can look awkward.
Concern: Valance will not be hanging straight.
Resolution: Be certain that the valance rod is securely put in and that the valance is evenly folded. Modify the valance as wanted to make sure it is hanging straight.
Concern: Valance is just too slim or vast.
Resolution: Select a valance that’s the identical width because the window or barely wider for a extra dramatic look. A valance that’s too slim or vast could make the window look unbalanced.
Care and Upkeep of Drapes and Valances
Common care and upkeep will preserve your drapes and valances wanting their greatest and lengthen their lifespan.
Dusting and Vacuuming
Use a smooth brush or attachment to take away mud and particles. Vacuum drapes on the bottom setting if doable.
Spot Cleansing
Should you encounter a stain, act shortly to attenuate injury. Use a moist material or sponge with a light detergent. Blot gently, avoiding rubbing.
Dry Cleansing
Skilled dry cleansing is beneficial for deep cleansing. Comply with the care directions on the label.
Washing
Examine the label for laundry directions. Machine-washable drapes ought to be hung to dry or dried on the bottom setting to stop shrinkage.
Ironing
Iron drapes on a low setting utilizing a urgent material. Don’t iron instantly on the material.
Eradicating Wrinkles
Hold drapes on a hook or rod and steam to take away wrinkles. You may as well spray with a wrinkle launch answer.
Storing
Retailer drapes in a cool, dry place away from direct daylight to stop fading.
Cleansing Valances
Relying on the fabric, valances could require dry cleansing, hand washing, or vacuuming. Comply with the producer’s directions.
Defending From Pets
Preserve drapes and valances away from pets by masking them with a protecting spray or utilizing coaching strategies.
Hearth Security
Set up smoke and fireplace detectors to guard your drapes and valances from accidents.
| Cleansing Technique | Drapes | Valances |
|---|---|---|
| Dusting/Vacuuming | Sure | Sure |
| Spot Cleansing | Sure | Sure |
| Dry Cleansing | Sure | Sure |
| Washing | Some | No |
| Ironing | Sure | Sure |
The way to Hold Drapes and Valance
Hanging drapes and valances is a good way so as to add type and class to any room. With a bit planning and preparation, you’ll be able to simply dangle your drapes and valance like a professional.
Listed here are the steps on dangle drapes and valance:
- Measure the width of your window and add 12 inches to find out the size of your curtain rod.
- Mark the middle of your window body and use a degree to make sure that the rod is hung straight.
- Set up the curtain rod brackets in keeping with the producer’s directions.
- Hold the drapes on the curtain rod.
- Measure the width of your window and add 6 inches to find out the size of your valance.
- Minimize a chunk of material to the specified size and width.
- Fold the highest and backside edges of the material by 1 inch and press.
- Fold the material in half lengthwise and press.
- Insert a curtain rod by means of the highest hem.
- Hold the valance on the curtain rod above the drapes.
Individuals Additionally Ask About The way to Hold Drapes and Valance
What is the best way to hang drapes?
One of the best ways to hold drapes is to make use of a curtain rod that’s no less than 12 inches longer than the width of your window. This can be sure that the drapes dangle evenly and do not look cluttered.
How do I hang a valance?
To hold a valance, you’ll need a curtain rod that’s 6 inches shorter than the width of your window. This can be sure that the valance hangs simply above the drapes and does not look too cumbersome.
What is the difference between drapes and valances?
Drapes are lengthy, flowing curtains which might be used to cowl home windows and doorways. Valances are shorter curtains which might be used to cowl the highest of home windows and add an ornamental contact.
